PROVISION OF FURNITURE ITEMS CIVIL WORKS AND MISCELLANEOUS ITEMS FOR PROJECT MANAGEMENT OFFICE CUM NEW TRANSIT FACILITY AT NASIRABAD

Amount

RENOVATION/ADDITION ALTERATION

Eath work in excavation by mechanical means (Hydraulic excavtor)/manual means in foundation trenches or drains (not exceeding 1.5m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, for all lift including getting out the excavated soil and disposal of surplus excavated soil as directed with a lead of 50m. a) All kinds of soil

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : a) 1:1 1/2:3 (1 Cement : 1 1/2 coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources)

Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) : 3 graded stone aggregate 20 mm nominal size).

Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation in plinth in : a) Cement mortar 1:6 (1 cement : 6 coarse sand)

12 mm cement plaster of mix : a) 1:6 (1 cement: 6 fine sand)

Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade : a) New work (two or more coats) over and including water thinnable priming coat with cement primer

Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS : 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarsesand), including grouting the joints with white cement and matching pigments etc., complete. a) 600mm x 600mm

Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joint with white cement & matching pigments etc. complete. a) Size of Tile 600x600 mm

Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length (hold fast lugs or dash fastener shall be paid for separately). a) Second class teak wood

Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part 1) decorative type, core of block board constructing with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters. a) 35 mm thick including ISI marked stainless steel butt hinges with necessary screws

Extra for providing lipping with 2nd class teak wood battens 25 mm minimum depth on all edges of flush door shutters (over all area of door shutter to be measured).

Providing and fixing glazed shutters for doors, windows and clerestory windows using 4mm thick float glass panes (weight not less than 10 Kg per sqm) fixing with ISI marked M.S. pressed butt hinges bright finished of required size with necessory screws : a) Second class teak wood i) 35mm thick

Providing and fixing aluminium sliding door bolts, ISI marked anodised ( anodic coating not less than grade AC 10 as per IS: 1869), transparent or dyed to required colour or shade, with nuts and screws ect. Complete : a) 300x16 mm

Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete a) 300x10 mm

Providing and fixing aluminium handles ISI marked anodised ( anobic coating not less grade AC 10 as per IS :1868)transparent or dyed to required colour and shade with necessary screws etc complete a) 125 mm

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipe`s & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. a) Internal work - Exposed on wall

i) 15 mm nominal outer dia Pipes

ii) 20 mm nominal outer dia Pipes

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. a) Concealed work, including cutting chases and making good the walls etc

i) 15 mm nominal outer dia Pipes

ii) 20 mm nominal outer dia Pipes

Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) over 75mm thick bed of dry brick ballast 40 mm nominal size, well rammed and consolidated and grouted with fine sand, including necessary excavation, levelling & dressing & finishing the top smooth.

Reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth Level. . a) Thermo-Mechanically Treated bars of grade Fe-500D or more

Centring and shuttering including strutting,propping,etc. and removal of form for :

a) Foundations, footings, bases of columns etc for mas concrete

b) Lintels, beams, plinth beams, griders, bressumers and cantilevers

c) Columns ,Pillars ,piers ,Abutments ,Posts,and Struts

d) Weather shade, Chajjas, corbels etc., including edges.

Suspended floors, roofs, landings, balconies and access platform with water proof ply 12 mm thick

Providing and fixing glass panes with putty and galzing clips in steel door, windows, clerestory windows, all complete a) 5.5 mm thick glass panes

Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from mild steel sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS : 277 and consisting of aangle cleats of size 25mm wide x 1.6mm thick with flanges of 27mm and 37mm at 1200mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5mm dia x 50mm long with 6mm dia bolts, other flange of ceat fixed to the angel hangers of 25x10x0.50mm of required length with nuts & bolts of required size and other end angle fixed with intermediate G.I channels 45x15x0.9mm running at the spacing of 1200 centre to centre, to which the ceiling section 0.5mm thick bottom wedge of 80mm with tapered flanges of 26mm each having lips of 10.5mm, at 450mm centre to centre, shall be fixed in a direction perpendicular to G.I intermediate channel with connecting clips made out of 2.64mm dia x 230mm long G.I wire at every junction including fixing perimeter channels 0.5mm thick 27mm high having flanges of 20mm and 30mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450mm centre, with 25mm long dry wall screws @ 230mm interval including fixing of gypsum board to ceiling section and perimeter channel with the help of dry wall screws size 3.5x25mm at 230mm c/c including jointing and finising to a flush finish of tapered and square edges of the board with recommended jointing compound, jointing tapes, finishing with jointing compound in 3 layers covering upto 150mm on both sides of joint and two coats of primer suitable for board, all as per manufacturer’s specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed all complete as per drawings specification and direction of the Engineer-in-Charge but excluding the of painting with : a) 12.55mm thick tapered edge gypsum plain board confirming to IS : 2095-(Part I) : 2011 (Board with BIS certification marks)

ELECTRIC WORK

Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit,with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required.

a) One light point controlled by one 6A switch (Group A)

b) Two light point controlled by one 6A switch (Group B)

c) Three light point controlled by one 6A switch (Group C)

d) Exhaust fan point controlled by one 6A switch including ceiling rose.

e) One ceiling fan point controled by one 6A switch with 100W step type electronic regulator including concealed MS fan hook box.

Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.

a) 5/6 A switch

b) 15/16 A switch

c) 3 pin 5/6 A socket outlet

d) 6 pin 15/16 A socket outlet

Geyser 25 Ltr fibre body steel container Make Bajaj or equivalent

Steel Desert Cooler 40 Ltr

36 Watt LED recess mounted fixture Make Philips Cat No. RCS80B LED30S-6500 L60W60PSD OD Sl or equivalent

Horticulture operations including 300mm earth filling, grassing, tree plantations/shrubs and potted plants etc. Of the following :-

(a) Pots with Seaforthia Pilm – 5 Nos

(b) Pots with Rubber black variety – 5 Nos

(c) Pots with Area Paim - 10 Nos

(d) Pots with Fishtall Paim – 10 Nos

FURNITURE & FURNISHING

LINEN ITEMS

Bed sheet Double (Set of two bed sheet & two pillow covers) BD (Beaucale) Dyed Size 229 x 254 cm trident equivalent

Bed cover Double make Bombay Dyeing Radiance or equivalent

Razai/Dohar Double Jaipuri of good quality in cotton

Blanket Double Raymonds Alps/Ambrosia 4 Side satin size 229 x 220 cm/BD Mink Paradise PTD 220 x 240cm or equivalent

Razai/Quilt Double Slumber Bombay Dyeing/Monte Carlo or Premium Jaipuri velvet gold of size 7’ x 6’ or 250 x 225 cm having cotton 6 kg approx or equivalent

Bed sheet Single (Set of two bed sheet & two pillow covers) BD (Beaucale) Dyed Size 150 x 229 cm trident equivalent

Bed cover Single make Bombay Dyeing BD Radiance or eqivalent

Razai cover Jaipuri of good quality made of cotton

Blanket Double Raymonds Cold Master (Single) 4 Side satin/BD mink Paradise 150 x 220 cm or Blanket for CAPFs (Capital) (Blanket for CAPFs BD Vinayak) or equivalent

Razai/Quilt Double Slumber Bombay Dyeing/Monte Carlo or Premium Jaipuri velvet gold of size 6’ x 4’ or 150 x 220 cm having cotton 4 kg approx or equivalent

Curtains cloth for window/Door without lining with bottom folding of 150mm and top folding 150mm with provision of 3 plates in each of lenght as required on site with stiching & pressing for VIP Rooms/Officer Rooms/Dining Hall/Lounge/Reception/Recreation Room/Gykm Rooms Fabric, Make of Decor/GEM or equivalent

Bath Towel Large BD Tulip Dyed combed of size 75 x 150cm Trident/Wellspun or equivalent

Pillow Foam Coirfoam soft touch/Sleep well Curves/BD quilted softy Micro size 24 x 17 cm or equivalent

Hand Towel Tulip Size 40 x 60 cm dyed Wellspun/Trident or equivalent

Napkin towel for Dining Table Size 1.5 x 1.5 ft of cottonin white self point

BATHROOM ITEMS

Bucket Plastic 20 Ltr Cap Cello or equivalent

Mug Plastic Cello or equivalent

Soap Case Plastic

Stool Plastic Milton/Cello

CUTLERY CROCKERY

Supply of Full Plate of high quality Bone China Food Grade of dia 260mm, depth 20mm, 2.5mm thisck and wight 161-180 gm with embossed/printed pattern in between and edge circular design pattern and colour line porcelian with DDRDO coloured Logo as supplied by user of reputated make. Note : All crockery items should be same pattern & brand. Soft copy of Logo will be provided by the department)

Supply of Qtr Plate of high quality Bone China Food Grade of dia 125mm, depth 20mm, 2.5mm thisck and wight 160 gm with embossed/printed pattern in between and edge circular design pattern and colour line porcelian with DDRDO coloured Logo Milton make or equivalent Note : All crockery items should be same pattern & brand. Soft copy of Logo will be provided by the department)

Footed/Stacked tea cup & saucer stackable 180-200ml Article No. 3001-10160 porcelain make Vanras with embossed pattern in between circular design pattern and inner colour line on the outside cup and on the side in saucer with DRDo Logo

Veg Bowl 13 cm porcelian make Vanras with embossed patern in between circular design pattern and inner colour line. Pattern No 6502-0013 with DRDO Logo

Supply of Rice plate bone china 31cm/12” with embossed pattern in betwen circular design pattern and inner colour line with DRDO coloured Logo. Note : All crockery items should be same pattern & brand. Soft copy of Logo will be provided by the department)

Suooly of Donga Bone China with lid of size lenght 210mm, width 170mm, height 90mm and one handles on each side/Casserole 1000ml capacity, porcelain make Vanras or equivalent with embossed/printed pattern in between and edge circular design pattern and inner colour line on the outside cup and on the side in saucer with DRDO coloured Logo. Note : All crockery items should be same pattern & brand. Soft copy of Logo will be provided by the department)

Supply of Glass Tummbler Medium Make Borosil, Treo or equivalent 400ml capacity with embossed DRDO coloured Logo. Note : All crokery items should be same pattern & brand. Soft copy of Logo will be provided by the department

Table spoon grade 304 heavy duty make Venus/Vinod or Techo Commercial equivalent

Supply of Desert Fork Stainless Steel (6 Fork in one Set & 4 Pin) make Venus/Vinod or Techno Commmercial or equivalent Length = 175mm, heavy duty thickness not less than 2.0mm/14 Gauge SS304 Grade

Supply of Desert Knife SS Grade 304 heavey duty, make Venus/Vinod or Techno Commercial equivalent

Supply of Butter Knife SS Grade 304 heavey duty, make Venus/Vinod or Techno Commercial equivalent, Lenght = 18cm

Supply of Tea spoon stainless steel grade 304 heavy duty, make Venus/Vinod or Techo Commercial equivalent Length = 15cm

Supply of Rice spoon SS grade 304 heavy duty make Venus/Vinod or Techo Commercial equivalent Length = 21cm

Supply of Serving spoon SS grade 304 heavy duty make Venus/Vinod or Techo Commercial equivalent Length =275 mm, Bowl outer dia 65mm

Supply of Soup Bowl Bone China 115-130mm dia Soup with spon & Qtr plate with embosseed pattern in between circular design pattern and inner colour line on the outside in soup bowl and embossed pattern on spoon as well as quarter plate porcelain make Vanras or equivalent Note : All crockery items should be same pattern & brand. Soft copy of Logo will be provided by the department)

Flower Vase Porcelian 6-8” Height with embossed pattern in between circular design pattern and colour line porcelain make Vanras with DRDO Logo

Supply of Caserrole 2 litre make Milton/Cello or Techno Commercial equivalent stainless steel body, round shape, solid design, heat retention time (hours) 2

Karchi stainless steel, Devidaya/PNB or equivalent

Coasters good quality as per approved sample

Supply of Water Jug stainless steel 2 Litre cap, top dia 137mm, height 185mm & sheet thickness 0.7mm make Venus/Vinod or Techno Commercail equivalent

Supply of Tea set Bone China of 6 Pcs with DRDO coloured Logo Set of 6 Cups (150ml), 6 Saucers (100mm dia), 1 Tea Pot (1 Litre Cap), 1 Milk Pot (500ml cap), 1 Sugar pot (100gm cap), Note : All crockery items should be same pattern & brand. Soft copy of Logo will be provided by the department)

Idi Cooker for 50 idlies good quality Stainless steel 304 50 Block/Self gas Commercial Ldli steamer

MISC ITEMS

Electric Iron Make Philips/Usha/Morphy or Techno Commercial equivalent, 1100 Wattqage with heavy duty ironing

Kadai iron large (Approx 2.5 Kg weight)

Kadai iron medium (Approx 1.5 Kg weight)

Supply of Patila/Degchie Aluminium of capacity 18 Ltr with lid, approximate dimenstions as inside Diameter 450mm, height 20mm, heavey duty, Hard Anodized coating, with ISI Mark

Supply of Patila/Degchie Aluminium of capacity 12 Ltr with lid, approximate dimenstions as inside Diameter 300mm, height 20mm, heavey duty, Hard Anodized coating, with ISI Mark

Palta iron large of good quality

Jhara iron Large of good quality

Chakla marble and wooden belan

Parat big aluminium approx 1.5 kg weight

Serving tray Cello Plastic or equivalent

Salt & Pepper set Bone China with DRDO coloured logo make Vanras

Supply of Pressure Cooker 7.5/-8 Ltr Capacity confirming to IS:5522, make Hawkins/Prestige or Techno Commercial equivalent, with warrantee of three year minimum, material of Body stainless steel with ISI Mark

Supply of Pressure Cooker 5 Ltr Capacity confirming to IS:5522, make Hawkins/Prestige or Techno Commercial equivalent, with warrantee of three year minimum, material of Body stainless steel with ISI Mark

Supply of Pressure Cooker 12 Ltr Capacity confirming to IS:5522, make Hawkins/Prestige or Techno Commercial equivalent, with warrantee of three year minimum, material of Body stainless steel with ISI Mark

Supply of Container stainless steel capacity 10 Kg capacity with handle and removable Lid, Sheet Thickness of Container (0.7mm), Sheet thickness of Lid (0.5mm), PNB/Devidayal

Supply of Container stainless steel capacity 5 Kg capacity with handle and removable Lid , Sheet Thickness of Container (0.7mm), Sheet thickness of Lid (0.5mm), PNB/Devidayal

Supply of Container stainless steel capacity 2 Kg capacity with handle and removable Lid , Sheet Thickness of Container (0.7mm), Sheet thickness of Lid (0.5mm), PNB/Devidayal

Chimta iron PNB/Devidayal

Supply of Masala Box Stainless steel ( 6 Sections) Outer dia of container (120mm) Height of Container (52mm) Sheet Thickness of Container (0.7mm) Sheet Thickness of Lid (0.5mm) Min Thickenss of Container (0.5mm) Inner Dia of Lid (120.25mm) Height og Lid (23.5mm) Min Thickness of Lid (0.45mm)

Supply of Flask 1 Ltr Capacity heavy duty stainless steel double wall vacuum-insulated stainless steel construction keeps beverages hot (for up to 6 hours) or cold (for up to 12 hours, make Milton/cello or Techno Commercail or equivalent

Supply of Toaster Electric 4 Slice of Size 25.5 x 15.75 x 18.5 mm , electric Thermostat, Timer and Thermostat and Lever and Bottons and Control 1630 watt Toaste4r (Orient electric) (Orient Electric Pop UP Toaster), Toshiba/Usha/Prestige SKU Code 41703 or equivalent

Egg Beater Stainles steel good quality

Supply of Kitchen Knife Stainless Steel body (Set of 4) Glare/Crystal or Techno Commercial Equivalent, Length = 125mm, For 02 Set = 08 Nos

Supply of Gas Lighter SS body Glare/Crystal Robust Built

Dust Bin Plastic foot operated make Cello/Milton/Nayasa or equivalent

Dust Bin large for kitchen wase make Cello/Milton or equivalent

Sauce pan non stick make Nirlep/Prestige or equivalent

Fry pan non stick make Omega Deluxe/Prestige SKU Code 30803-280mm/Nirlep/Devidayal

Supply of Tea Strainer stainless steel grade 304 big size 10cm Material of Strainer – Stainless Steel food grade Diameter of Stainses steel wire in mesh (mm) 0.24 strainer mesh aperture (Micron) 700

Mixer cum Juicer SUJATA Centrifigal Juicer with power of 900 watt (SUJATA) (Domestic Electric Juicer)/Usha/CG/Prestige SKU Code 41346 or equivalent

Supply of Wall clock(Silent Type) make Ajanta/Prestige or Techno Commercail equivalent moulded plastic, diameter appx 50cm equivalent

Good Night Machine with repelant refil

Hangar Plastic good quality

Footmat rubber good quality as per approved sample

Footmat big for main gate rubber good quality as per approved sample

Bath room mat woolen quality as per approved sample

Supply of Heat Convector/Halogen room heater of Size 300x203x102mm with 4 elements, indication light, 1500 watt 230 volt, speet regulator, make USHA Lexus or Techno Commercial equivalent

Dining Mat Plastic good quality as per approved sample

Synthetic carpet size 4.3” x 6.3” made from weft yarn waste cotton minimum 3 ply for cotton or jute mass g/sm 80 number of knots 13000 pile density 120 pile yarn single, twisted, mil spun all complete

Refrigerator 310-360 ltr make LG/Samsung/Whirlpol or Techno Commercial equivalent, doubel door, matallic finish, star raing with copper coil and having power saver compressor

Water cooler 120/150 Ltr cooling caacity make Voltas/Blustar/Usha or equivalent

Deep Freezer make VOLTAS COMBO COOLER (Voltas) (VOLTAS-VFC-220) Both Temperature/Blue star 20 ltr CHF 200C top opening manually deforested deep freezer capacity (l) 350 voltas make Usha or equivalent

Plastic Chair Nelkamal/Supreme or equivalent

MODERN KITCHEN

THREE BURNER COOKING RANGE (GAS) WITH 1U/S of Size 1500 x 600 x 850 Make- Jyoti equipmentsFabox 3 Burner Indain Gas Range ( HP+ 1 LP) with full length simmer plate (LP) Tool 16 Swg and Front 18 Swg stainless steel grade 304. Frame work mild steel angle 40 x 40 x 4mm rust proof silver painted and three side outer covering 20 swg stainless steel grade 202. Bottom shelf stainless steel 18 swg. CI pansuport 350 x 350 x 50mm vertical leg 16 swg stainless steel 38mm dia tube, and stailess steel adjustable bullet feet. Heat output (70,000 x 2 + 21,000 + 40,000) 2,01,000 BTU/hr

SUPPORTING TABLE of size 600 x 600 x 850 Make Jyoti equipments/Fabox Top 16 swg stainless steel 304 and under self 18 swg stainless steel 304. Frame work mild steel angle 40 x 40 x 4mm rust proof silver painted vertical leg stainless steel tube 38mm dia 16 swg & stainless steel Head type channel and nylon adjustable bullet feet.

SINGLE BURNER COOKING RANG STOCK POT STOVE (GAS) of size 600 x 600 x 600 Make Jyoti Equipments/Fabox Top 16 swg and Front 18 swg stainless steel 304. Frame work mild steel angle 40 x 40 x 4mm rust proof silver painted and three side outer covering 20 swg stainless steel 202. Bottom four side Bracings in 25mm dia 16G tube. CI pansupport 450 x 450 x 50mm vertical leg 16 swg stainless steel 38mm dia tube and stainless steel adjustable bullet feet. Heat output 70,000 BTU/hr

SINGLE BOWL SINK OF SIZE 500 X 600 X 850 + 150 Make Jyoti equipments/Fabox Top and 16 swg stainless steel 304. Frame workmild steel angel 40 x 40 x 4mm rust proof silver painted vertical leg stainless steel tube 38mm dia 16 swg, cross bracings 25mm dia stainless stell tube & nylon adjustable bullet feet. With 38mm dia sink west & Bowl vlave fitting with over flow system sink size 350 x 450 x 200mm drain wall 38mm water Sink faucet.

Exhaust Hoods of Size 3800 x 1350 x 500 Make Jyoti Equipments/Fabox Exhaust Hoods, stainless steel wall type 18 swg

TEA/COFFEE MAKIN MACHINE WTH DISPENSER (ELECTRIC) of size 750 x 500 x 600 Make Jyoti Equipments/Fabox Capacity 20 Ltr Water & 10 Ltr milk all sheet outer and inner 18 swg stainless steel 304 openable lid stainlees steel electric load 2 kw 1 ph automatic heating control system thermostate & on off switch with indicator lamp.

STORAGE RACK of size 1300x450x1800 Make Jyoti equipments/Fabox STORAGE RACK Five shelf 18 swg and vertical leg 38mm dia stainless steel tube and inverted stainless adjustable bullet WET STORE AREA feet.

DUNAGE RACK of size 900x600x250 Make Jyoti equipments/Fabox DUNAGE RACK . All frame work stainless steel square tube and outer frame work stainless steel square tube 38 x 38mm 16 swg and inner tube 25x25mm stainless steel square and vertical leg 200mm stainless steel square tube 16 swg and stainless steel adjustable bullet feet.

Co Excel Fan 1450 RRM (24” dia) size Make Jyoti equipments/Fabox Co Excel Fan Crompton motor 2 HP 1Ph

GI ducting Approx 250 Sqft Make Make Jyoti equipments/Fabox GI Ducting (FRESHAIR & EXHAUST) Made of 22 swg GI sheetCo Excel Fan Crompton motor 2 HP 1Ph

Gas Bank and 4 Cylinder Make Jyoti Equipments/Fabox Top mold steel sheet 18 swg and frame work mild steel angle 40x40x4mm bottom & midle shelf steel flat 25x25x4mm three side panel mild steel sheet 18 swg front door mild steel sheet 18 swg & locking system arrangement total rust prrof painted red colour.

Gas pipe line, Make Jyoti Equipments/Fabox GAS Pipe Line with all accessories

Supply of Chafing Dish capacity 5 Ltr made stainless steel 304 grade rectangular shape thickness 4mm with serving spoon & spoon plate all complete

UTILITY ITEMS

Supply of Emergency light LED make BAJAJ 8 Watt Emergency Light Unit BAJAJ (Bajaj elx 36) Features : Battery Voltage 6 Volt, Max emergency illumination items 240 minutes, Rated power 8 watt, Charging Voltage 120-240 VAC, Length (cm) : 24-26, Width (cm) : 12-14, Height (cm) : 12-14, Weight 4 Kg/Orpat/Philips/USHA or Equipment

Washing machine 7.5 Kg Semi Automatic Make MITASHI Washer with Dryer/Extractor Top Load Single Phase, 50 Hz Washing Machine/Drying Machines (MITASHI) (MITASHI FULLY AUTOMATIC WASHING MACHINE (MIFAWM62V20) Samsung/LG/Videocon or equivalent

Supply of Wet Grinder 4.5-5 Ltr Capacity SATKAR STEEL INDUSTRY Stainless steel 304 Single Phase, make Tritor/Lodhi

Supply of Fly/INSECT KILLER machine double rod make AVRO Wattage 80, Operating Voltage 220, Fibre Glass Body material or equivalent

Supply of Microwave Oven (30 Ltrs) Make LG/Philips/IFB/Samsung or eqivalent stainless steel body. Grill Heating, convection heating, heating time adjustment pitch (seconds) 150

AUDIO VIDEO DESPLAY EQUIPMENT & COMPUTER, PRINTER AND CCTV FACILITY WITH DTH CONNECTION

Supply of 42” FULL LED Colour Vdeo display with resolution 1920x1080 Smart TV with 10wx2 Speaker, WEP OS, HDMI Port-2, USB Port-1, Ethernet Port-1, with in built WIFI system with all equipments like remote control, connecting cable, batteries etc Make LG/Sony/Samsung or equivalent all complete

Provision of supply of Inter Core IS 12500 Computer Processor Intel, Generation 8 H Series Chipset, Operating System window 11, Ram Size 8 GB expendable upto 64 GB, Drive HDD with a capacity of 1000 GB, Computer in tower form factor, monitor technology IPS with LED Backlight Size 21.5 with resolution pixel 1920x1080, Monitor Board Series B, expansion slot 1, integrated graphic type wth 630 UHD, USB Port 4, Serial Port 1, VGA Port 1, HDMI port 1, DP Port 1, with mouse conectivit, type of mouse optical scroll, key board standard with 3 year on site waranty Make Lenovo, HP, Dell, ACER or equivalent

Provision of supply of Black Laser Jet/Mono Computer printer for A4 Size with composite cartidge, laser printer, mono type printing, print speed 20 sheet per minute, duplex feature, tray 1, by pass facility, resultion dpi 600x600, nenory 256 mb, processor speed 15 Mhz, with USB port, tray capacity 100, by pass facility 100, with a duty cycle of print 10000 in a month with one yar on site warranty. Make Lenovo, HP, Samsung & Canon or equivalent.

DHANKHAR ENTERPRISES

M.R. ENTERPRISES

D K Enterprises