Loading…
Loading…
Tender Value
Refer Docs
Closing Date
2 Sept 2026, 11:30 am5d left
Single Packet
Normal Tender
No
Not Applicable
Itemwise/Consigneewise
Lowest to Highest
CONSIGNEE
Not Applicable
90 days
Expenditure
General
93
3 conditions
Participation by manufacturers is preferred. However, agents/dealers participating on behalf of a manufacturer shall submit a Tender Specific Authorization (TSA) issued by the Principal/OEM along with their offer, failing which the offer shall be summarily rejected. In a particular tender, either the Principal/OEM or its authorized agent/dealer may participate for the same item, but not both simultaneously. Further, a Principal/OEM shall not issue a Tender Specific Authorization to more than one authorized agent/dealer for the same item in the same tender, and any such offers shall be summarily rejected. An authorized agent/dealer submitting a bid on behalf of one Principal/OEM shall not submit a bid on behalf of another Principal/OEM for the same item in the same tender, and such bids shall also be summarily rejected. The trader/authorized dealer shall clearly indicate in the bid the name of the manufacturer, make, and complete address of the manufacturing works to facilitate inspection of the material at the OEM's premises.
The provisions of the Public Procurement Policy for Goods Produced and Services Rendered by Micro and Small Enterprises (MSEs) shall be applicable to this tender in accordance with Para 4 of the Central Railway Bid Document attached with the tender.Upward Re-classification of Enterprise - Continuation of Non-Tax Benefits:In the event of an upward change in the investment in plant and machinery or equipment, turnover, or both, resulting in the re-classification of an enterprise from Micro to Small, Small to Medium, or otherwise, the enterprise shall continue to avail all applicable non-tax benefits of the category in which it was classified prior to such re-classification for a period of three (03) years from the date of such upward change, subject to the prevailing Government of India/MSME rules, notifications, and amendments issued from time to time.
The order of precedence of the tender documents shall be as follows: (1) Notice Inviting Tender (NIT), (2) Special Conditions of Contract, (3) Central Railway Bid Document, and (4) IRS Conditions of Contract. In the event of any inconsistency, ambiguity, or conflict between the provisions of these documents, the provisions contained in the document having the higher order of precedence (i.e., the lower serial number) shall prevail. For example, if there is any conflict between the provisions of the NIT and the IRS Conditions of Contract, the provisions of the NIT shall prevail, as it ranks higher in the order of precedence.
36 conditions
This is an e-tender. Manual Offers/Bids for this tender will not be accepted under any circumstances, only electronic Offers/Bids shall be accepted.
Have you furnished the statement of deviations, if any?
Have you mentioned MAKE/BRAND of OEM
Have you indicated the HSN code of your offered product
Have you kept your offer validity as per "Condition for Responsiveness of Offer"
Have you attached relevant document for MSE if you claimed benefits and preferential treatment as MSE firm
Goods & Services Tax (GST): As per Clause 9.0 and all sub clauses of CENTRAL RAILWAY BID DOCUMENT (Updated) JANUARY-2024. All tenderers to quote correct HSN code and corresponding GST rate for the item/items quoted. Misclassification in HSN code, if quoted by any bidder, shall be dealt as per Clause 9.0(iv) of Section II of CENTRAL RAILWAY BID DOCUMENT (Updated) JANUARY-2024
In case the successful tenderer is not liable to be registered under CGST/IGST/UTGST/ SGST Act, the Railway shall deduct the applicable GST from his/their bills under Reverse Charge Mechanism [RCM] and deposit the same to the concerned tax authority.
The Bidder agrees to supply the tendered stores at the rates quoted by him in accordance with the Standard Governing Conditions of this tender
The bidder confirms that Rates and other financial terms quoted in relevant columns of financial bid will only be ruling terms for acceptance, and such terms quoted anywhere else should be ignored. [Denial of this condition is not recommended]
Bidders shall also give Declaration as below:- I/We agree to pass on such additional input tax credit as may become available in future under GST scheme, in respect of all the inputs used in the manufacturing and/or supply of final goods/services on the date of supply by way of reduction in price and advise the purchaser accordingly
Vendors claiming to avail benefits and preferential treatment extended to Micro and Small Enterprises (MSEs) must necessarily upload relevant documents with their offer in terms of Clause 4.0 of Section II of CENTRAL RAILWAY BID DOCUMENT (Updated) JANUARY-2024. Vendors claiming MSE benefit, despite upward reclassification, must upload relevant MSE document.
Note to Bidders: Bidders are advised to carefully review the contents of the Undertaking/declaration prior to signing, as the submission of false information could lead to rejection of the bid.
All bidders shall confirm declaration as below in terms of Clause 5.15 of Section II of CENTRAL RAILWAY BID DOCUMENT (Updated) JANUARY-2024 in compliance of restrictions under Rule 144(xi) of GFR- 2017:- a) I have read the clause regarding restrictions on procurement from a bidder of country which shares a land border with India. b) I certify that this bidder is not from such a country or, if from such a country, has-been registered with the competent authority. c) I hereby certify that this bidder fulfils all requirements in this regard and is eligible to be considered. (Where applicable, evidence of valid registration by the competent authority is attached). If the bidder fails to give such declaration, as above, then it will be presumed that the contents of above declaration have been read and unconditionally agreed and accepted by the tenderer. If any tenderer is not agreeable to this declaration they have to categorically mention about the disagreement in Techno-Commercial Deviation.
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
1 condition
Validity of offer: Validity of offer should be 90 days. Offers quoted with lesser validity shall be deemed as commercially unresponsive and shall be summarily rejected.
1 location across Maharashtra · 400 Numbers total
Multipurpose Silicone Sealant
93266017~CR
93266017
Open - Indigenous
Goods
Jalgaon, Maharashtra
₹0
Exempted
26 Aug 2026
26 Aug 2026
1 item · 400 Numbers total
Multipurpose Silicone Sealant (clear transparent) in a tube of 300ml conforming to following properties 1.Colour: Clear transparent. 2. Tack free time: 10-25 minutes 3. Durometer Hardness: 20-30 Poin t Shore 'A' 4. Tensile strength: 200 psi or higher 5. Elongation: 350% or higher 6. Adhesion to steel: 20 pli 7 . Temperature resistance: Minus 50 degree Celsius to plus 150 degree Celsius or higher Similar to DOW CO RNING Product-733 or MASTER BOND Product-MASTERSIL 415 or BOSS Product-BOSS 322 or ANABOND RTV SILICONES 666 or similar [ Warranty Period: 30 Months after the date of delivery ] ]
| Delivery Location | State | Quantity |
|---|---|---|
| Sr. Section Engineer (SIGNAL) BHUSAWAL., CR | Maharashtra | 400.00 Numbers |
| Total | 400 Numbers | |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
5260548.pdf
ATTACHMENT
5554109.pdf
ATTACHMENT
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at [email protected].