REPAIR TO JOINERIES, CUP BOARD, ATT WORKS IN DOMESTIC AREA AT AF STN KALAIKUNDA

Amount

Taking down shutters of any description n exc 1 sqm each complete all as specified and as directed.

All as per item No 1 above but exc 1 Sqm and n exc 2 Sqm each

Taking down chowkats or frame with shutters of any description (without taking off shutter from the frame) not exc 1.5Sqm each complete all as specified and as directed.

All as per item No 3.00 above but exc 1.5 Sqm and not exc 4 Sqm

Taking down aluminium Chowkhats or frames not exc. 1.5 sq. m each without taking off shutter.Complete all as specified and as directed.

Taking down aluminium Chowkhats or frames exc 1.5 sq. m but n exc 4 sq. m each without taking off shutter .Complete all as specified and as directed.

S&F 105X60 mm size Pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, holdfast etc.and Making good to match With Existing Surface Complete all as specified and as directed.

S&F 125X60mm size Pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, holdfast,and Making good to match With Existing Surface etc., Complete all as specified and as directed.

S&F 35mm thick factory made 2nd class hard wood plain, framed, panelled shutter with lock rail and 12 mm thick veneered particle board with commercial vineering on both faces. The size of rail and stile as per IS-1003 (Pt-I) Kiln seasoned and chemicallhy pressure treated.Complete all as specified and as directed.

S&F 35mm thick factory msde Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats.Complete all as specified and as directed.

S&F Small fittins such as brackets of any type latch and hinges blocks shaped door and window stops including all necessary labours articals nexc 200 cu.cm each of II nd class HW complete.

S&F factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement etc Complete all as specified and as directed.

S&F factory made solid PVC door frame of size 50x47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube complete all as specifed and as directed

S&F flush shutters 35mm thick, solid core construction, with block board core and ply wood face panels, commercial type on both sides.Complete all as specified and as directed.

S&F Mild Steel windows or ventilators, fixed type, with glazing bars dovetailed or welded complete all as specified and directed.

S&F Mild steel window Any type of section with side hung shutters including projecting type hinges with steel handle and steel pag stay complete with glazing bars, dovetailed or welded complete all as specified and directed.

S&F Mild steel window Any type of section with side hung shutters including projecting type hinges with steel handle and steel pag stay complete without glazing bars, dovetailed or welded complete all as specified and directed.

S&F steel ventilater with top hung shutter including hinges and mild steel peg stay.Complete all as specified and as directed.

M&L resecuring ,easing and smoothening of any type steel window /ventilator pannel for smooth function in opening and closing and locking aaarngment with necessary repair including welding,bolting ,screwing or by any means all as specified or as directed

M&L PCC 1:3:6 type C-0 using 12.5 mm graded agg as in back filling of pressed steel frame.Complete all as specified and as directed.

M&L PCC 1:2:4 type B-0 using 12.5 mm graded stone aggregate as in bed locks hold fasts, plinth course cills and similar articles inlcuding form work.Complete all as specified and as directed.

S&F in repair Harrison rails/curtain rod 25mm, mild steel, chromium plated with fixing brackets, stops, rollers etc.Complete all as specified and as directed.

S&F curtain rod 25mm, 1.5mm thick Stainless steel, chromium plated with fixing brackets, stops, rollers etc complete as in repair.

M&L Securing glass of any description in existing wooden/steel frames glazed with putty/ beads including removing loose or decayed putty/ beads, painting/oiling one coat on rebates, grooves, reputtying and painting/oiling puttied surface to match existing work.

S&F 4mm thick plain Sheet glass, ordinary quality and glazing with oil putty and pins in square n exc 0.5 sq. m in each pane on wooden/steel joinery in cluding hacking out of any height of structure complete all as specified

S&F in repairs 4mm thick plain Sheet glass, ordinary quality and glazing with oil putty and pins in square n exc 0.5 sq. m in each pane on wooden/steel joinery including hacking out of any height of structute complete all as specified

S&F 4mm thick figured Sheet glass pin headed type and glazing with oil putty and pins in square n exc 0.5 sq. m in each pane on wooden/steel joinery in cluding hacking out of any height of structure complete all as specified

S&F in repairs 4mm thick figured Sheet glass pin headed type and glazing with oil putty and pins in square exc 0.5 sq. m in each pane on wooden/steel joinery in cluding hacking out of any height of structure complete all as specified

S&F in repair stainless steel wire cloth, 0.56 mm dia of wire and average width of aperture 1 mm and fixed with stainless steel wire staples.Complete all as specified and as directed.

S&F stainless steel wire cloth, 0.56 mm dia of wire and average width of aperture 1 mm and fixed with stainless steel wire staples.Complete all as specified and as directed.

S&F mild steel Bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required: hooks (stay), heavy, for large gates; hook and pintle hinges: large hasps and staples; chains; hand made sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe-290 Gde-E-165.Complete all as specified and as directed.

S&F aluminium anodised barrel tower bolts of extruded section 150mm long.Complete all as specified and as directed.

S&F aluminium anodised barrel tower bolts of extruded section 200mm long all as spd

S&F mild steel sliding door bolts 300mm size plate type stove enamelled black with bright bolts not less than 12mm dia with and including a minimum of 6 bolts plate and nuts, four on bolts and two on staple plate in wooden shutters and welded /diveresed in steel shutters.Complete all as specified and as directed.

S&F Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts extruded sections or cast alumiium alloy 300 mm long.Complete all as specified and as directed.

S&F butt hinges medium weight cold rolled mild steel 100mm size.Complete all as specified and as directed.

S&F butt hinges medium weight cold rolled mild steel 75mm size all Complete all as specified and as directed.

S&F 125 mm long Parliament hinges, mild steel cold rolled complete all as specified and as directed.

S&F in repair 150mm long mild steel ordinary quality rat rail rod pattern spring including roller plate complete fixed to steel surfaces including necessary welding complete all as specified and directed.

S&F aluminum extruded aluminium alloy handles (fabricated type) anodised of 150mm Complete all as specified and as directed.

S&F hasp and staple mild steel plate type stove enamelled black including bolt to hinge plate and fixed with screws 100mm size.Complete all as specified and as directed.

M&L in repair second class hard wood plain filllets square rectangular or triangular in section clean sawn secured with nails n.exc 3 Sqcm sqm.Complete all as specified and as directed.

S&F 30mm width of flaps (when open) Continuous (piano) hinges, mild steel, bright finish or electrogalvanised.Complete all as specified and as directed.

S&F in repair Double action floor springs hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box main of brass with stainless steel cover governing pivot made of brass other parts made of M S heavy duty.Complete all as specified and as directed.

S&F in repair door closer aluminium extruded section hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed.Complete all as specified and as directed.

S&F in repair 18 mm thick Block boards, grade 2 quality, interior grade,commercial type of any size fixed with screw complete all as specified and directed.

S&F in repair 18mm thick Block boards, grade 2 quality, interior grade, decorative type with decorative face veneer on one face as in cup board, shelves etc of any size fixed with screw complete all as specified and directed.

M&L preparation or new steel and iron surfaces of any description and applying two coats of synthetic enamel paint over a coat of red oxide primer over10cm in width or girth.complete all as specified and directed.

Preparation of new wood surfaces of any description and applying two coats of synthetic enamel paint over a coat of pink primer over10cm in width or girth.complete all as specified and directed.

S&F mild steel framed work as in door shutters of angles or other section with gusset plates rails, braces etc complete drilling welding for fixing of steel sheeting or other covering door etc to be prepared for hanging or sliding.Complete all as specified and as directed.

S&F mild steel plain black sheet 1.00mm thick as in covering to doors shutters etc cut to size edges beaded holes punched, including rounded scraws or rrivets and fixed to wooden steel memberes etc with plain 40mm lap joints or alds/ reavated.Complete all as specified and as directed.

S&F framed work such as grills gratings etc and similar works conforming to Fe 410-0complete all as specified and as directed.

Demolition of brick work or stone/ boulder masonry built in cement mortar or cement lime mortar in existing manholes / septic tank, sumps ,soakage pits including all quoins, arches, pillars etc complete all as specified and as directed.

M&L, brick work with fly ash brick , straight or curved on plan, exc. 6 metre mean radius built in cement mortar 1:6 as in any position complete all as specified and as directed.

Taking down cement or cement lime plaster any description, on brick or stone walls including chhajja of any floor and roof projection etc including raking out joints, hacking for key, scrubbing down with water etc.Complete all as specified and as directed.

M&L rendering 10 mm thick on fair faces of brick work/ surfaces in cement mortar (1:6) finished even and fair without using extra cement complete all as specified and directed.

M&L rendering 15 mm thick in cement mortar (1:4) on other than fair faces of brick or concrete surfaces (5mm thick CM 1:4 with WPC setting coat and 10mm thick CM 1:4 backing coat), finished even & smooth without using extra cement completed all as specified and directed by Engineer-in-Charge. Note :- WPC measured and paid separetely.

Supply only integral water proofing compound.

M&L preparation of new plastered or unplastered surfaces of wall and applying two coats of cement based paint over a coat of primer complete all as specified and directed.

M&L preparation of new plastered surfaces applying 3 mm thick wall care putty and rubbing with sand paper to achieve a level and smooth to wall and applying two coats of oil bound distemper over a coat of wall primer on walls complete all as specified and as directed.

Taking down Aluminium door shutters and refixing in the same opening including making petty repairs as required like cleaning and repair/replacement of beadings, glazing clips, rubber gasket, stoppers, adjusting tower bolts, locks, hydraulic door closer, hinges etc and make smooth functioning with entire satisfaction of Engr-in-Charge complete all as specified and as directed

Taking down Aluminium window shutters and refixing in the same opening including making petty repairs as required incl cleaning and repair/replacement of beadings, glazing clips, stoppers, rubber beading, locks, stays, hinges etc and make smooth functioning with entire satisfaction of Engr-in-Charge complete all as specified and as directed

Supply and fixing in repair of aluminium sliding window with powder coating (minimum thickness of powder coating 50 micron) including following components / specifications complete all as specified and as directed. (i) Two leaf glazed sliding shutter and one leaf gauged (fly proofing) sliding shutter. (ii) Opening of windows exceeding 0.90 Sqm but not exceeding 1.50 Sqm (iii) Thickness and weight per metre length of aluminium frame and section of shutter all as shown on drawing. (iv) All vertical/ horizontal joints shall be of extruded aluminium section so as to avoid any play between jointed members. (v) All other accessories such as jointing cleats, glazing clips, rubber neoprene packing, anodised aluminium snap beading, screws, etc. (vi) Rest all as specified in drawing no CEZ/2015/TD/007 Sheet no 1R/5, 2R/5, 3R/5, 4R/5 & 5R/5.Note for item ser No. :- 1. Sheet glass, aluminium grill and stainless steel wire mesh shall be measured and paid against respective items of BOQ and all other items as shown on drawing shall be included in quoted rate. 2. Mode of Measurement : Only opening size of window

S&F Anodised aluminium door Power Coated shutters, aluminium section weighing 0.55 kg/ m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. complete all as specified.

S&F Anodised aluminium Power Coated window and ventilator shutters, fixed type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws.Complete all as specified and as directed.

S&F Anodised aluminium Power Coated frame for doors, windows, ventilators, partion with one or more rebates including joining cleat for fixing etc. Complete all as specified and as directed.

S&F aluminium anodised grill Power Coated of design "DG - 104" pattern made out of thickness as directed complete all as per manufacturer instruction. Make : Decogrille or equivalent model of makes as approved by the GE.

S&F in Repair 150mm Floor door stopper of Brass body and tongue, anodised, with hard drawn steel spring, fixed in floor as per specified and directed

S&F in Repair 100mm Size Brass Mortice lock, vertical type,4 lever as per specified and directed

M&L French polishing on surfaces of any description, width or girth including cleaning and preparing the surface including a coat of wood filler on new works with two or more coats, previously polished.Complete all as specified and as directed.

S&F Multicolor Fiber Sheet 2mm Thickness high density for Gate and window fitted by screws or pasting as per specified and directed

Dismantling floor, hearth or wall tiling including cement mortar bedding ( but not backing), removing serviceable tiles to store and disposing the rubbish to the out side of MD land.Complete all as specified and as directed.

M&L Non skid coloured ceramic tiles 7to 8 mm thick(square/Rectanglar) area of each tiles exc .11 Sqm but not exc 0.18 Sqm in floor including 15mm thick screed be or bedding layer for laying floor finishes in CM 1:6 etc set and jointed in neat cement slurry and pointed in white or coloured cement to match.Complete all as specified and as directed.

M&L coloured glazed ceramic tiles 350x250 x7mm / 450x350xx7 mm thick but as on vertical surfaces such as skirting/dado including 10mm thick rendering in CM 1:4 .complete all as specified

S&F in repairs Door seal (Snake guard) with Aluminium frame powder coated Complete all as specified and as directed.

Resecuring or easing & adjusting without taking down shutter of any description of wooden joinery not exceeding 1 Sqm each.complete all as specified

All as per Item No 77 above but Exceeding 1 Sqm n.exc 2 Sqm each

All as per Item No 77 above but Exceeding 2 Sqm each

Taking down and refixing of shutter of any description in same opening.complete all as specified Note : Refixing incl taking down easing and adjusting and also refxing builders hardware as reqd incl removal of unserviceable screws etc. Hardware items will be paid at supply only rates except screws and nails Not exceeding 1 Sqm each

All as per Item No 80 above but Exceeding 1 Sqm n.exc 2 Sqm each

All as per Item No 80 above but Exceeding 2 Sqm each

Supply only 150 mm long Mild steel barrel tower bolts, stove enamelled black, with bright bolt and fixed.Complete all as specified and as directed.

Supply only 150 mm long Aluminium anozied barrel tower bolt of extruded section.Complete all as specified and as directed.

Supply only 250mm long Mild steel sliding door bolts, plate type, stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate.Complete all as specified and as directed.

Supply only 250mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy .Complete all as specified and as directed.

Supply only 100mm long Butt hinges, medium weight, cold rolled mild steel fixed with screw.Complete all as specified and as directed.

Supply only 100mm long Butt hinges, medium weight, cold rolled mild steel fixed with welding .Complete all as specified and as directed.

Supply only 75mm long Butt hinges, medium weight, cold rolled mild steel.

M&L treatment of soil under existing floors using emulsion @ one litre per hole, 300mm apart including drilling and plugging 12mm dia holes with cement mortar 1:2 (1 cement :2 coarse sand) to match the existing floors Complete all as specified and as directed.

M&L along the external wall below concrete or masonry aron using chemical emulsion @ 2.25 litres per linear metre including drilling and plugging holes etc. in apron.Complete all as specified and as directed.

M&L at points of contact of wood work by chemical emulsion (in oil or kerosene based solution) @ 0.5 litre/hole by drilling 6mm dia holes at a downward angle of 45 degree at 150mm centre to centre and sealing the same. Note 1:-The contract sum shall be arrived at after deducting amount of schedule of credit from the total quoted amount. Note 2:-The tenderer (all eligible contractors) shall ascertain the taxes & levies as on date. The subject tender caters all the taxes & levies as on date including the latest notification of GST issued as on date ( issued by Central Board of Indirect Taxes and Customs)

Ray Enterprise (BID ID -3323865)

Neetu Construction (BID ID -3334808)