Electrification of New Workshop cum Office Building of Rodding Shop-II Mechanical.

Amount

SUPPLY AND INSTALLATION OF GI BOARD 12" X 4" INSIDE WALL . THE GI BOARD ALONG WITH SUNMICA COVER TO BE SUPPLIED BY THE PARTY

SUPPLY AND INSTALLATION OF GI BOARD 8" X 6" INSIDE WALL . THE GI BOARD ALONG WITH SUNMICA COVER TO BE SUPPLIED BY THE PARTY.

SUPPLY AND INSTALLATION OF GI BOARD 6" X 4" INSIDE WALL . THE GI BOARD ALONG WITH SUNMICA COVER TO BE SUPPLIED BY THE PARTY

SUPPLY AND INSTALLATION OF GI BOARD 4" X 4" INSIDE WALL . THE GI BOARD ALONG WITH SUNMICA COVER TO BE SUPPLIED BY THE PARTY

FIXING OF WALL MOUNTING FAN ON THE WALL AS PER INSTRUCTION OF EIC, CONNECTING IT TO THE PROVIDED SOURCE, TESTING ITS OPERATION. WALL MOUNTING FAN WILL BE SUPPLIED BY M/s NALCO

I)SUPPLY, II)FIXING AND TESTING OF 5AMP S.P. 250VOLT PIANO SWITCH,IN STEEL BOX WITH ACRYLIC COVER COMPLETE AS REQUIRED. EACH ACTIVITY REPRESENTS EQUAL PART OF THE ITEM VALUE/WEIGHTAGE.

I) SUPPLY, II) FIXING AND TESTING OF 5AMP S.P. 250VOLT SOCKET OUTLET IN STEEL BOX WITH ACRYLIC COVER COMPLETE AS REQUIRED. EACH ACTIVITY REPRESENTS EQUAL PART OF THE ITEM VALUE/WEIGHTAGE.

I) SUPPLY, II)FIXING AND TESTING OF 15AMP S.P. 250VOLT PIANO SWITCH,IN STEEL BOX WITH ACRYLIC COVER COMPLETE AS REQUIRED. EACH ACTIVITY REPRESENTS EQUAL PART OF THE ITEM VALUE/WEIGHTAGE.

I)SUPPLY, II)FIXING AND TESTING OF 15AMP S.P. 250VOLT SOCKET OUTLET IN STEEL BOX WITH ACRYLIC COVER COMPLETE AS REQUIRED. EACH ACTIVITY REPRESENTS EQUAL PART OF THE ITEM VALUE/WEIGHTAGE

ERECTION/COMM. 5KG + TO 20KG I) TAKING DELIVERY FROM NALCO MAIN STORES, II) ERRECTION AND COMMISSIONING WITH III) FABRICATION OF SUITABLE MOUNTING STRUCTURE AFTER IV) COMPLETE CONNECTION WITH CABLE DRESSING OF PUSH BUTTON BOX, JUNCTION BOX, POWER SOCKET CABINATE, LOAD BREAK SWITCH AND OTHER ELECTRICAL CONTROL GEARS MORE THAN 5KG TO 20 KG. MS FLAT AND CHANNEL FOR FABRICATION WILL BE SUPPLIED BY NALCO. EACH ACTIVITY REPRESENTS EQUAL ITEM VALUE/WEIGHTAGE.

I) INSTALLATION OF MCBs INSIDE MCB BOX COMPLETE WITH, II) CONNECTION, WIRING, TESTING. EACH ACTIVITY REPRESENTS EQUAL PARTOF THE ITM VALUE/WEIGHTAGE

CRIMP/TERMINATION OF WIRE UPTO 4SMM I) TERMINATION, II) WITH CRIMPING OF WIRE TERMINALS UPTO 6SQMM. ALL MATERIAL WILL BE SUPPLIED BY PARTY. EACH ACTIVITY REPRESENTS EQUAL PART OF THE ITEM VALUE/WEIGHTAGE

SUPPLY AND INSTALLATION OF 2X20W LIGHT FITTING ON WALL OR CEILING AS INSTRUCTED BY THE EIC. MAKE OF THE LIGHT FIXTURES MAY BE CONFINED TO BAJAJ, CROMPTON, HAVELLS AND WIPRO

INSTALLATION OF GI STRIP SIZE-25X3mm 1) SUPPLY AND 2) INSTALLATION OF GI STRIP OF SIZE 25X3MM FROM PDB TO RUNNING EARTH, LDB TO RUNNING EARTH, LIGHTING ARRESTER TO RUNNING EARTH AND PSCs TO RUNNING EARTH ON WALL OR STRUCTURE INCLUDING WELDING AT JOINTS. 3)APPLYING ANTICORROSIVE PAINTS TO WELDED PORTION, CLAMPING AT AN INTERVAL OF 1METER.

FABRICATION AND MOUNTING OF MS FRAME FABRICATION AND ERECTION OF MS BASE FRAMES, SUPPORTS FOR PDB, PSCs AND CABLE TRAY SUPPORT OUT OF ROLLED MS SECTIONS, PIPES, PLATES ETC. INCLUDING WELDING, BOLTING, I) SUPPLY OF ANCHOR BOLT, GROUTING, II)INCLUDING ONE COAT OF ANTI RUST PRIMER AND TWO COATS OF PAINT, III) BREAKING AND REPAIRING OF REQUIRED PORTION OF WALLS, FLOORS FOR STRUCTURES AS REQUIRED INCLUDING SUPPLY OF ALL LABOURS. STEEL TO BE SUPPLIED BY NALCO AND IT IS TO BE TRANSPORTED FROM STORE TO SITE BY THE PARTY.

AC STARTER FIXING AS PER THE INSTRUCTION OF EIC. ALL MATERIAL WILL BE SUPPLIED BY NALCO.

LAYING OF POWER CABLE FOR PSCs AND MCB BOX ALONG WITH CABLE TRAYS GROUTED/FIXED ON THE WALL. ONLY THE REQUIRED CABLE AND THE CABLE TRAY WILL BE SUPPLIED BY M/s NALCO, REST ALL THE MATERIALS AND HARDWARES NECESSARY FOR INSTALLATION OF CABLE TRAY AND CABLE WILL BE SUPPLIED BY THE PARTY.

SUPPLY AND INSTALLATION OF CEILING FAN OF 1200MM SWEEP, 240V AC, ALONG WITH ELECTRONIC REGULATOR AND REQUIRED HARDWARE AS PER DIRECTION OF EIC. MAKE OF THE CEILING FAN MAY BE CONFINED TO BAJAJ, ALMONARD, USHA, CROPMTON AND HAVELS.

SUPPLY AND INSTALLATION OF EXHAUST FAN OF SIZE 300MM, 240V AC ALONG WITH APPROPRIATE RING AND LOUVER AND REQUIRED HARDWARE AS PER DIRECTION OF EIC. MAKE OF THE EXHAUST FAN MAY BE CONFINED TO BAJAJ, ALMONARD, USHA, CROPMTON AND HAVELS. THE REQUIRED HOLE ON THE WALL FOR EXHAUST TO BE DONE BY THE PARTY.

WIRING & COMM. OF PVC CONCEAL 1.5 CU.WIR WIRING AND COMMISSIONING OF PVC CONCEALED CONDUIT WITH SUPPLY OF 1.5 SQ.MM COPPER WIRE WITH SUPPLY OF ALL MATERIALS. EACH UNIT CONSISTS OF 4 Nos. OF 1.5SQMM CU WIRE AND ONE PVC PIPE.

WIRING & COMM. OF PVC CONCEAL 2.5 CU.WIR WIRING AND COMMISSIONING OF PVC CONCEALED CONDUIT WITH SUPPLY OF 2.5 SQ.MM COPPER WIRE WITH SUPPLY OF ALL MATERIALS. EACH UNIT CONSISTS OF 4 Nos. OF 2.5SQMM CU WIRE AND ONE PVC PIPE.

WIRING & COMM. OF PVC CONCEAL 4.0 CU.WIR WIRING AND COMMISSIONING OF PVC CONCEALED CONDUIT WITH SUPPLY OF 4 SQ.MM COPPER WIRE WITH SUPPLY OF ALL MATERIALS. EACH UNIT CONSISTS OF 4 Nos. OF 4 SQMM CU WIRE AND ONE PVC PIPE

WIRING & COMM. OF PVC CONCEAL 6.0 CU.WIR WIRING AND COMMISSIONING OF PVC CONCEALED CONDUIT WITH SUPPLY OF 6 SQ.MM COPPER WIRE WITH SUPPLY OF ALL MATERIALS. EACH UNIT CONSISTS OF 4 Nos. OF 6 SQMM CU WIRE AND ONE PVC PIPE.

BINAYAK ENGINEERING

M/s Power Engineering Enterprises

PROGRESSIVE ENGINEERS AND ASSOCIATES

M/s. Unitech Power Engineering & Co.

M/S BIRAJA ELECTRICALS

M/S B & J ELECTRICALS