SPECIAL REPAIRS TO CERTAIN LIVING-IN ACCN AT VAYUSENABAD AT 7 BRD AND ADDN/ALTN TO PRAKING SHED AT AF STN TUGHLAKABAD UNDER GE (AF) TUGHLAKABAD

Amount

Taking down chowkats or frame with shutter (without taking out shutter from the frame) not exceeding 1.50 Sqm each as doors, windows & ventilators etc. and removal from site complete all as specified and directed by Engr-in-charge.

S&F Solid PVC Double door frame of size 50mm x 95mm made out of 5mm wood grain printed PVC sheet reinforced with M.S. tube, supplying & Fixing in opening as per specification & drawing complete all as specified and directed by Engr-in-charge.

S&F Factory Made Solid PVC Moulded Door Shutters 28 to 30 mm thick (stile:), with 2,4 or 6 raised panel design with 2mm thick 3D wood grain Moulded PVC Sheet Polyurethane painted on the front face & 2mm Plain colour PVC Sheet on back face, supplying & fixing in frame at site as per specification & drawing complete all as specified and directed by Engr-in-charge.

S&F factory made Steel windows 1.25 mm thick box type (primer coated) ERW hollow P sections of size 60mm X 25mm including grill using 10 Sqmm bar double riveted both gaze and glass shutter comprised gauged glazed skeleton shutters ERW section 50mm X 20mm and 1mm thick with two open able leafs consisting 2 nos sash bar of T section 20mm X 3mm complete welded to frame with one vertical mullion of ERW box type T section of size 60mm X 25mm and 1.25 mm thick including cutting holes and making good dismantled portion in PCC (1:2:4) type B1 four numbers of each window complete all as specified and directed by Engr-in-charge including following fittings welded to frame shutter :- (a) Hold fast, 150 mm long of 12mmX3mm made to shape 04 nos per window. (b) handle of Z section 20mmX25mm, 100 mm long -per leaf. (c) Mild steel tower bolt 150mm long - 02 Nos per leaf. (d) Z section 20mmX25mm, 100 mm long stopper -01 nos per leaf. (e) Cleat 55mm long of hollow square 15mm X20mmX63mm welded to hinge -01 Nos per Leaf. (f) MS pintal hinges of size 75mmX12mm- 02 Nos per leaf including stainless steel wire cloth, 0.25mm to 0.36mm nominal dia of wire and average width of aperture 1.40mm to 2mm and fixed with aluminium wire staples and glass pan 3mm thick fixed with MS pin and oil putty including two coats of synthetic enamel paint. Note:- During fixing of window surface shall be make good in plumb with existing finishes like cement plaster, similar wall tile, floor tile etc and as per site requirement.

S&F factory made Ventilators 1.25 mm thick box type (primer coated) ERW hollow P sections of size 60mm X 25mm including grill using 10 Sqmm bar double riveted both gauge and glass shutter comprised gauged glazed skeleton shutters ERW section 50mm X 20mm and 1mm thick with two open able leafs consisting 2 nos sash bar of T section 20mm X 3mm complete welded to frame with one vertical mullion of ERW box type T section of size 60mm X 25mm and 1.25 mm thick including cutting holes and making good dismantled portion in PCC (1:2:4) type B1 four numbers of each window complete all as specified and directed by Engr-in-charge including following fittings welded to frame shutter :- (a) Hold fast, 150 mm long of 12mmX3mm made to shape 04 nos per ventilator. (b) handle of Z section 20mmX25mm, 100 mm long -per leaf. (c) MS tower bolt 150mm long - 02 Nos per leaf. (d) Z section 20mmX25mm, 100 mm long stopper -01 nos per leaf. (e) Cleat 55mm long of hollow square 15mm X20mmX63mm welded to hinge -01 Nos per Leaf. (f) MS pintal hinges of size 75mmX12mm- 02 Nos per leaf including stainless steel wire cloth, 0.25mm to 0.36mm nominal dia of wire and average width of aperture 1.40mm to 2mm and fixed with aluminium wire staples and glass pan 3mm thick fixed with MS pin and oil putty including two coats of synthetic enamel paint. Note:- During fixing of ventilator surface shall be make good in plumb with existing finishes like cement plaster, similar wall tile, floor tile etc and as per site requirement.

S&F Aluminium anodised 100 mm long Butt hinges with galvanised mild steel screws complete all as specified and directed by Engr-in-charge.

S&F Aliminium anodised barrel tower bolts, 150 mm long complete all as specified and directed by Engr-in-charge.

S&F Aluminium anodised handles, cast type anodised 125 mm long complete all as specified and directed by Engr-in-charge.

S&F in repair Vitreous china squatting pan Orissa pattern, including trap finished making good to floor size 580X440 mm white with integral foot rest, with PVC valve syphonic action type flushing cistern, low level white, with inlet, ball valve, float and handle including brackets 10 ltr capacity flush pipe of PVC 32mm dia for low level cistern complete all as specified and directed by Engr-in-charge.

S&F in repairs of Health Faucet with 1.5 mtr long SS tube and hook complete all as specified and directed by Engr-in-charge. Make:- Prayag/Jaquar/Volga

S&F in repairs wash down water closet EWC floor mounting with soft close seat cover and twine flush cistern fitting 520x360x390mm complete all as specified and directed by Engr-in-charge. Make : Cera, cat part No s1059102 P trap 100mm or equivalent

S&F in repair wash hand basin of size 550 x 400 mm vitreous China white flat back including brackets, waste coupling & PVC waste pipe of 32 mm dia etc. complete all as specified and directed by Engr-in-charge.

S&F in repair 32 mm bore of pipe low density (LDPE) of pressure rating 6 kg/ Sqcm fixed to wall or floor etc including fittings complete all as specified and directed by Engr-in-charge.

S&F in repair 15mm bore chromium plated Pillar cock screwed down high pressure, with or without lettered Hot ot Cold with long screwed shanks and fly nuts screwed for iron pipe complete all as specified and directed by Engr-in-charge.

S&F in repair PVC connection 15 mm size with PTMT nuts of length 450 mm of approved quality complete all as specified and directed by Engr-in-charge.

S&F in repair 15 mm bore Angle stop valve cast copper alloy screwed down high pressure with crutch butter fly handle screwed both ends for iron pipe or for unions and fixed complete all as specified and directed by Engr-in-charge.

S&F in repair brass chromium plated shower rose 125 mm of size with arm and with or without swivel joints to steel pipe or union complete all as specified and directed by Engr-in-charge.

S&F in repairs 15 mm dia bore concealed stop valves cast copper alloy chromium plated fancy type with long shank & cup (concealed type) complete all as specified and directed by Engr-in-charge.

S&F in repair brass chromium plated tubular towel rail, 20 mm dia, D type, 60 cm long between flanges complete all as specified and directed by Engr-in-charge.

S&F in repair CP soap tray fixed to walls with rubber plugs complete all as specified and directed by Engr-in-charge.

S&F in repair 15 mm dia bore bib taps cast copper alloy with crutch and butterfly handle, screwed for iron pipe, or for brass ferrule complete all as specified and directed by Engr-in-charge.

S&F 125mm dia grating doom with/without waste hole of PTMT (Minimum weight 40 gms) complete all as specified and directed by Engr-in-charge.

S&F in repair PVC bath room cabinet with mirror of size 432 mm x 311 mm complete all as specified and directed by Engr-in-charge.

Taking up or down GI tubing /PPR pipe15 mm bore pipe and connections including cleaning for re-fixing or removal to store complete all as specified and directed by Engr-in-charge.

Taking up or down GI tubing/PPR pipe 20mm bore pipe and connections including cleaning for re-fixing or removal to store complete all as specified and directed by Engr-in-charge.

S&F GI tubing 15 mm bore medium grade galvanise with all fitting and fixed to walls & ceilings or laid in floors, bore of pipe 15 mm complete all as specified and directed by Engr-in-charge.

S&F GI tubing 20 mm bore medium grade galvanise with all fitting and fixed to walls & ceilings or laid in floors, bore of pipe 20 mm complete all as specified and directed by Engr-in-charge.

Dismantling of stone slabs and tiles of any description or thickness in floors, aprons etc. complete all as specified and directed by Engr-in-charge.

Dismantling, floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed by Engr-in-charge.

M&L for 15 mm thick Screed bed or bedding layer in CM (1:4) complete all as specified and directed by Engr-in-charge.

S&F non skid ceramic coloured tiles of 7 to 8 mm thick (square/rectangular) area of each tile exc 0.18 Sqm but n.exc 0.38 Sqm in floors set and jointed in neat cement slurry and pointed with white or coloured cement to match complete all as specified and directed by Engr-in-charge.

S&F non skid ceramic coloured tiles of 7 to 8 mm thick (square/rectangular) area of each tile exc 0.18 Sqm but n.exc 0.38 Sqm on vertical surfaces such as skirting including 10 mm thick rendering in CM (1:4) set and jointed in neat cement slurry and pointed with white or coloured cement to match complete all as specified and directed by Engr-in-charge.

S&F glazed ceramic coloured tiles 7mm thick 450 x 300mm size in vertical surface set and jointed in neat cement slurry and pointed in white cement paste pigmented to the shade. Etc including 10 mm thick rendering in CM (1:4) set and jointed in neat cement slurry and pointed with white or coloured cement to match complete all as specified and directed by Engr-in-charge.

M&L for 10 to 12 mm thick vitrified unglazed and unpolished, scratch resistant, matt finished coloured tiles (square/ rectangular) of size not less than 300mm x 300mm as in parking /hard standing etc including set, jointed in cement slurry and pointed in white or coloured cement to match the colour/ shades of tiles over and including 15 mm thick screed bed in CM (1:4) complete all as specified and directed by Engr-in-charge.

M&L for 20mm thick granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like over 15mm thick screed bed in CM (1:6) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including moulding work on exposed edges of granite stones complete all as specified and directed by Engr-in-charge.

Rounding to the edge of stone slabs on edge such as cooking platform complete all as specified and directed by Engr-in-charge.

M&L for PCC (1:3:6) type C-2 using 40mm graded stone aggregate 75mm thick as in plinth protection complete all as specified and directed by Engr-in-charge.

M&L for PCC (1:3:6), type C-2 using 40mm graded stone aggregate as in foundation, sub base under interlocking tiles/chequred tile, etc complete all as specified and directed by Engr-in-charge.

M&L for chequered cement concrete tiles 20cm x 20cm x 25mm thick set and jointed and pointed in neat cement slurry with grey cement and pigment in floors including 20 mm screed bed in CM (1:6) complete all as specified and directed by Engr-in-charge.

Taking down rain water pipe and eaves gutters (any size and pattern) including all fittings heads shoes bends swan necks etc complete all as specified and directed by Engr-in-charge.

S&F 110 mm bore of pipe PVC (SWR) pipes single socket in any length with rubber ring joint fixed to walls with MS clamps as directed 6 Kg/Sq cm complete all as specified and directed by Engr-in-charge.

S&F 110 mm bore of pipe PVC (SWR) bends of any radius / shoe fixed to PVC pipes complete all as specified and directed by Engr-in-charge.

Demolition of brick work of any type built in cement mortar in fowl condition/normal etc complete all as specified and directed by Engr-in-charge.

M&L for brick work built in cement and sand mortar (1:6) with sub class 'B' old size bricks straight or curved on plan exceeding 6m means radius complete all as specified and directed by Engr-in-charge.

Taking down Cement plaster including raking out joints hacking for key scrubbing down with water etc complete all as specified and directed by Engr-in-charge.

M&L for 10 mm thick cement plaster with ready mix plaster (as per manufaturer's instruction) on fair faces of brick wall or concrete surfaces finished even and smooth, (without using extra cement) complete all as specified and directed by Engineer-in-Charge. Note:- 1. Make of ready mix plaster shall be Birla Aerocon/Ultratech readiplast/ACC Accoplast / Fosroc Chemical (India) Pvt Ltd Renderoc and as approved by GE) 2. The ready mix plaster shall be procured directly from the manufacturer or their authorised dealer. 3 The contractor shall produced original purchase voucher alongwith test certificate of ready mix plaster by manufacturer or their authorised dealer while claiming RAR/ Final Bill.

M&L for aluminium composite panel of 4.00 mm thickness which consist of 3mm thick thermoplastic cora of anti-toxic LDPE sandwiches between 2 skins of 0.5mm thick aluminium foils with outer surface finished with 30 PVDF & inner surface finished with thin coat of polyester paint, cladding panel fixed to wall by angle iron clamps 25 x 25 x 6mm with spacing not more than 0.5 mtr c/c colour shade and pattern as approved by GE including all necessary frame work complete all as specified and directed by Engr-in-charge.

M&L for 15 mm thick cement plaster with ready mix plaster (as per manufaturer's instruction) on fair faces of brick wall or concrete surfaces finished even and smooth, (without using extra cement) complete all as specified and directed by Engineer-in-Charge. Note:- 1. Make of ready mix plaster shall be Birla Aerocon/Ultratech readiplast/ACC Accoplast / Fosroc Chemical (India) Pvt Ltd Renderoc and as approved by GE) 2. The ready mix plaster shall be procured directly from the manufacturer or their authorised dealer. 3 The contractor shall produced original purchase voucher alongwith test certificate of ready mix plaster by manufacturer or their authorised dealer while claiming RAR/ Final Bill.

M&L for rendering 5mm thick in patches in cement mortar in (1:3) on ceiling complete all as specified and directed by Engr-in-charge.

M&L for making good broken edges of chajjas slabs, facing, fins etc in patches area not exceeding 1 Sqm of each patch, height upto 12 metre, with 15mm thick cement plaster and sand mortar (1:3) or with PCC (1:2:4) type B-0 using 12.5 mm graded stone aggregate, with necessary form work, finished the surface even and smooth without using extra cement complete all as specified and directed by Engr-in-charge.

S&F in repair 1000 ltrs three layer in white colour capacity Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position including dismantling water tanks and removing to store complete all as specified and directed by Engr-in-charge.

S&F in repair 25 mm ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed, Minimum weight 20mm - 210 gms, complete all as specified and directed by Engr-in-charge.

S&F in repair gun metal gate valves with iron wheel head 20mm complete all as specified and directed by Engr-in-charge.

M&L preparing new surfaces of walls and applying two coat of Oil bound distemper over a coat of primer on new surface complete all as specified and directed by Engr-in-charge.

M&L for preparation of newly plastered surfaces and applying three coats of white wash on ceiling complete all as specified and directed by Engr-in-charge.

M&L for preparation of undecorated surfaces of walls and applying two coats of Cement Base Paint of approved tint, complete all as specified and directed by Engr-in-charge.

M&L for preparation of new steel surfaces of any description exc 10 cm width or girth and applying two coat of synthetic enamel paint over red oxide complete all as specified and directed by Engr-in-charge. (20+90)

M&L for gunniting to RCC works in column beams, slabs, chajja, facia, landing, balconies etc by removing/ dismantling of RCC (loose concrete) and cutting of steel bar including plaster cleaning of surfaces with wire brushes and applying epoxy, paint anti corrosive coating of minimum 40-50 microns thick with sikatop Armatec 108 or Colusal VL of MC Bauchemie to rusted steel reinforcement after removing cleaning all rust and supply and fixing welded steel wire mesh 75mm x75mm with 4mm dia steel wire as facies/drops and similar works etc and epoxy based or other equivalent suitable bonding against treatment to be carried out on old concrete surface with Sikadur 32 of Sikka, Nito bond EP of fosroc or equivalent (as per manufacturers instruction) to bond old and new concrete mixing @ 2% by weight of cement polycrete and providing gunniting with a minimum pressure of 2 to 2.5 Kg Sqcm and applying 25mm thick gunniting in cement mortar (1:2) (one part of cement and two part of ghaghar sand) including 15 mm thick plastering (1:4) using ordinary port land cement of 43 grade over wherever required, complete all as specified and directed by Engineer-in-Charge. Note:- (i) After placing the additional reinforcement all concrete surface shall be thoroughly scrubbing with. (ii) Additional reinforced TMT bars where incorporated in work and including 20mm thick cement plaster in (1:4) (iii) Work to be carried out as in patches as directed by Engr-in-charge. (iv) Rate for steel scaffolding as directed to be included in quoted rate. (v) All demolished material removed from MOD land completely.

M&L for MS rolled section, MS Pipe, MS Square/circular tube, framed work as in balcony railing doors, railing, chajja, gates or other section fixed with fastener complete all as specified and directed by Engr-in-charge. Notes: Work to be carried out upto 12 Mtr height. The rates included dismantling of existing RCC balcony wall, including cutting down existing reinforcement and making good.

M&L for cutting holes into or through brick wall built in cement mortar and making good in cement mortar (1:3) or cement concrete (1:2:4) type B-1 using 20 mm graded stone aggregate as required of superficial area n. exc 150 Sqcm complete all as specified and directed by Engr-in-charge.

M&L in repairs for Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm of any colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed by Engr-in-charge.

Removing existing roof treatment and preparing surfaces to the entire satisfaction of Engr-in Charge /GE including taking down existing plaster, cleaning of all foreign material such as grass roots dust etc and roughening the concrete surfaces by wire brushes and washing down to remove dust/mud etc. flushing at junction of parapets complete and removing the same to the places where directed by Engr-in-Charge.

M&L for preparing new surfaces and applying two coats of Polyurethene (PU) based Water proofing liquid compound as per manufacturer's instruction to stop leakage/seepage from roof/wall complete all as specified and directed by Engr-in-charge.

M&L for Kota stone slabs, 20-25mm thick, machine cut as in flooring of size not less than 0.25 Sqm each, set and jointed in cement slurry over & including screed bed of 20 mm thick in cement mortar (1:6) and pointed in cement mixed with pigment to match the shade of slab including rubbing, cutting and polishing (mirror type) complete all as specified and directed by Engr-in-charge.

M&L Kota stone slabs, 20-25mm thick, machine cut as in skirting, set and jointed in cement slurry over & including rendering coat of 10 mm thick in cement mortar (1:4) and pointed in cement mixed with pigment to match the shade of slab including rubbing, cutting and polishing complete all as specified and directed by Engr-in-charge.

M&L for rubbing and polishing to the existing kota stone complete all as specified and directed by Engr-in-charge.

M&L for cement concrete (1:5:10) type E2 using 40mm graded aggregate as in sunken portion of toilets complete all as specified and directed by Engr-in-charge.

M&L for PCC (1:2:4) type B-1 using 20mm graded stone aggregate in CM (1:4) mixed with water proofing compound @ 3% by weight of cement for fixing of nahani trap or floor trap etc in position complete all as specified and directed by Engr-in-charge.

Demolition of cement concrete unreinforced of any description and in any position not otherwise specifically provided for & removing of rubbish from premises of defence land complete all as specified and directed by Engr-in-charge.

S&F non skid ceramic coloured tiles of 7 to 8 mm thick (square/rectangular) area of each tile exc 0.11 Sqm but n.exc 0.18 Sqm with 15 mm thick Screed bed or bedding layer in CM (1:4) set and jointed in neat cement slurry and pointed with white or coloured cement to match in floors, complete all as specified and directed by Engr-in-charge.

M&L for rendering 15mm thick in cement mortar (1:4) with water proofing compound 3% by wt of cement, finished even and smooth without using extra cement in sunken portion complete all as specified and directed by Engr-in-charge. Note:- WPC shall be measured and paid separately

Applying evenly a tack coat of industrial bitumen 85/25 at the rate of 1.20 Kg/Sqm including cleaning of surfaces over newly plastered surfaces of sunken portion complete all as specified and directed by Engr-in-charge.

M&L for leakage/seepage proof coating consisting of preparing the surface of roofs, exterior walls, parapet, chajjas etc. with wire brush to remove all loose dirt, oil, grease etc. and filling cracks above 5mm thickness with Dr Fixit Pedilite URP or with plaster seal of STP Ltd and crack less than 5mm with Dr Fixit Crack X powder or with plaster seal of STP Ltd and applying Dr Fixit primeseal primer or STP Ltd (and allow today for 8hrs under touch dry condition and subsequently two coats of water proof decorative elastomeric coating system of Dr Fixit Raincoat with DFT 100 microns or shalicry 215 of STP (The surface after painting one coat shall be allowed to dry at least 6 hours before next coat) etc. complete all as per manufacture instruction and all as specified and directed by Engr-in-charge.

Demolition of cement concrete (unreinforced) in ground floor & paving n.exc. 15 cm thick (below or above ground level complete all as specified and directed by Engr-in-charge.

Excavting in post holes soft/loose soil or similar holes not exc 0.5 cum getting out returning filling and removing surplus soil to a distance not exc 50 mtr and making good surfaces plete complete all as specified and directed by Engr-in-charge.

M&L for cement concrete in foundations filling and mass concrete (1:2:4) type B1 using 20 mm graded stone aggregate plete complete all as specified and directed by Engr-in-charge.

Dismantling wrought iron or mild steel work of any description not otherwise provided for and removing from site plete complete all as specified and directed by Engr-in-charge.

S&F roof trusses/post work in tubular trusses including distance pieces cleats etc including welding and using ERW or induction butt welded tubes conforming to IS 1161-1979, grade 410W (Grade-E-250) Quality plete complete all as specified and directed by Engr-in-charge.

Dismantling of fibre roof covering of any thickness, including cover fillets plain of any gauge, thickness including aluminium or silmilar pattern roof coverings complete all as specified and directed by Engr-in-charge.

M&L for Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm of any colour in curved roofing/ horizontal/vertical/any position and any shape tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed by Engr-in-charge.

Neeraj Enterprises

ANAND ENTERPRISES

M/S S.K.Electricals

FUTURE ENGINEERING