Special repair to residential accommodation of Govt. Ayurvedic Health Sub-Center at Thaila, Tehsil Suni, District Shimla, Himachal Pradesh

Amount

Dismantling tiled floors laid in mortar upto floor two level including stacking of serviceable materials and disposal of un-serviceable materials within all lead and lifts (wooden/concrete joists to be measured and paid for separately) For thickness of tiles above 25mm and upto 40mmas per the directions of Engineer-in-Charge.

Dismantling doors, windows and clerestory windows, ventilators etc. (wood or steel) shutters including chowkhats, architraves, hold fasts and other attachements etc. complete and stacking them within all leads and lifts. Not exceeding 3 sq.m in area as per the directions of Engineer-in-charge.

Dismantling roofing including ridges, hips, valleys, gutters etc. stacking the serviceable materials and disposal of un-serviceable materials within all leads and lifts as per the directions of Engineer-in-charge. G.I. Sheet roofing

Dismantling cement asbestos celotax/hard board in ceiling or partition wall including stacking of serviceable materials and disposal of un-serviceable materials within all leads and lifts as per the directions of Engineer-in-Charge. (Frame work such as joists, beams to be measured and paid for separately)

Half brick work using common burnt clay building bricks in super structure above plinth level upto all floor level using second class building bricks in cement mortar 1:4 ( one cement : four sand) as per HPPWD specification 1990 (one thousand Nine hundred Ninety ) volume-I including carriage of materials ,labour ,tool and plants through all modes of transportation with in all leads and lifts, and as per direction of the Engineer-in-charge..

Form work:-Providing form work with steel plates 3.15mm (three point fifteen millimetres) thick welded with angle iron in frame 30x30x5mm (thirty into thirty into five millimetres ) so as to give a fair finish including centering, shuttering, strutting and propping etc., with wooden steel battens and ballies, height of propping and centering below supporting floor to ceiling not exceeding all heights and removal of the same for insitu-reinforced concrete and plain concrete work including carriage of materials up to all leads and lifts as per the direction of the Engineer-in-Charge.

Flat surfaces such as soffits of suspended floors, roofs, landings and the like.

Edges of slabs and breaks in floors and walls under twenty centimetre wide.

Providing and laying cement concrete 1:1.5:3 ( one cement : one and half sand :three graded stone aggregate twenty millimetre nominal size) and curing complete, mixing the material in mechanical mixture and compacting the concrete with vibrator complete excluding cost of form work and reinforcement for reinforced concrete work including carriage of materials up to all leads and lifts as per the direction of the Engineer-in-Charge. Suspended floors, roofs, landings and shelves and their support balconies, beams, girders, bressumers and cantilevers up to all floor level.

Providing mild steel/tor steel reinforcement for reinforced cement concrete work including cutting /bending, binding and placing in position complete including cost of binding wire up to floor all level including carriage of materials up to all leads and lifts as per the direction of the Engineer-in-Charge.(a)Tor steel.

Providing wood work in frames of false celling partitions etc. sawn and put-up in position. including carriage of materials up to all leads and lifts as per the direction of the Engineer-in-Charge. Sal Wood

Providing woodwork in frames of doors,windows,clerestory,windows and other frames wrought,framed and fixed in position including carriage of materials up to all leads and lifts as per the direction of the Engineer-in-Charge. Sal Wood

Providing and fixing panelled glazed or panelled and glazed CHAPTER XII WOOD WORK shutters for doors windows and clerestory windows. Including black enamelled iron butt hinges with necessary screws 2nd class deodar wood including carriage of materials up to all leads and lifts as per the direction of the Engineer-in-Charge. Sal Wood

Providing and fixing wire gauge shutters using galvanised M.S. wire gauge of I.S. gauge designation 85 G. with wire of dia 0.56 mm for doors windows and clerestorey windows including bright finished black enamelled iron hinges with necessary screws, 30mm thick in 2nd class deodar wood including carriage of material upto all leads and lifts as per the directions of Engineer-in-charge.

Providing 40x3 mm flat iron hold fast 40cm. Long including fixing to frame with 10mm diameter bolts & nuts and wooden plugs and embeding in cement concrete block 30x10x15cm. 1:3:6 ( 1 cement : 3 sand: 6 graded stone aggregate 20mm nominal size) including carriage of material upto all leads and lifts as per the directions of Engineer-in-charge.

Providing and fixing oxidized M.S. sliding door bolts with nuts and screws etc. complete including carriage of material upto all leads and lifts as per the directions of Engineer-in-charge. 250x16 mm

Providing and fixing M.S. tower bolts (barrel type) with necessary screws etc. complete. including carriage of material upto all leads and lifts as per the directions of Engineer-in-charge. A) 200 x10 mm

Providing and fixing M.S. tower bolts (barrel type) with necessary screws etc. complete. including carriage of material upto all leads and lifts as per the directions of Engineer-in-charge. A) 150 x10 mm

Providing and fixing M.S. handles with necessary screws complete including carriage of material upto all leads and lifts as per the directions of Engineer-in-charge. A) 125 mm

Providing and fixing M.S. hooks and eyes including carriage of material upto all leads and lifts as per the directions of Engineer-in-charge. A) 150 mm

Providing and fixing bright finished or/and black enamelled iron (Helical door spring 150mm) including carriage of material upto all leads and lifts as per the directions of Engineer-in-charge.

Providing and fixing M.S. grills of required patterns in wooden frames of windows etc. with M.S. Flats, square or round bars with round headed bolts and nuts or by screws including carriage of material upto all leads and lifts as per the directions of Engineer-in-charge. Plain grill.

Providing and fixing 10mm thick anti skid water proof stain and impect resistent heavy duty vetrified tiles Nitco or equivalant 600x600mmx10mm manufactured of approved shade and colour in flooring, treads of steps and landings laid over 12mm thick cement mortar 1:3 (1 cement : 3 sand) jointed with cement slurry mixed with pigment to match the shade of tiles as required complete including carriage of material upto all leads and lifts as per the directions of Engineer-in-charge.

Providing and fixing 2mm thick PVC antistatic venyl Flooring plain or coloured, carbed or mosaic/metalled finish laid with approved adhesive on sub-floor (damp proofing treatment to be paid for separately) complete including carriage of material upto all leads and lifts as per the directions of Engineer-in-charge.

White glazed tiles 6 mm ( six millimetre) thick in skirting risers of steps and dado of approved make and size 30x40 cm over base of 12mm thick cement mortar 1:3 (one cement : three sand) and jointing with neat cement slurry including carriage of material in all leads and lifts :-( size thirty centimetre into twenty centimetre) as per HPPWD specification 1990 (one thousand Nine hundred Ninety ) volume-I including carriage of materials in all leads and lifts:-

Providing and fixing plain asbestos cement sheet ceiling of approved quality with butt jointing and wood screws (frame work and cover fillets to be measured and paid for separately) complete including carriage of material upto all leads and lifts as per the directions of Engineer-in-charge. 6 mm thick.

Providing corrugated G.I sheet roofing fixed with galvanised iron J.or L. hooks bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers filled with white lead complete excluding the cost of purlins refters and trusses. 0.63 mm thick sheet including carriage of material upto all leads and lifts as per the directions of Engineer-in-charge. 6 mm thick.

Repairs to plaster in patches of 2.50 Sq.M. and under and 10 to 15mm thick including cutting the patch in proper shape and replastering the surface of the wall including disposal of rubbish to the dumping ground within all leads with Cement Mortar 1:4 (1 Cement : 4 Sand) including carriage of material upto all leads and lifts as per the directions of Engineer-in-charge. 6 mm thick.

Supplying and fixing glass panes with putty and nails including removal of broken glass panes wherever necessary including carriage of material upto all leads and lifts as per the directions of Engineer-in-charge. Plain Glass: 4mm thick.

Providing and laying marble work with baroda green marble having semi round noising (table rubbed and polished) in flooring 20 mm thick base in cement mortar 1:3 (1 cement: 3 Sand) including jointing with cement mortar 1:2 (1white cement : 2 marble dust) with an admixure of pigment to match the shade of the marble 20 mm thick baroda green marble including entire carriage of materials upto all leads and lifts as per the directions of Engineer-in-Charge. (A.R.)

Distempering (two coats) oil bound distemper of approved brand and manufacture and of required shade on undecorated wall surfaces /ceiling to give an even shade over and including a priming coat with distemper primer of approved brand and manufacture after thoroughly brushing the surface free from mortar drooping and other foreign matter and also including preparing the surface even and sand papered smooth priming coat with distemper primer including carriage of materials up to all leads and lifts and as per the direction of Engineer-in-Charge.

Applying two coat wood base putty on new wood surface after thoroughly brushing the surface free from mortar drops, dust ,loose materials and other foreign matters sand papered smooth to give final matter finish to the surface complete including carriage of materials up to all leads and lifts and as per the direction of Engineer-in-Charge.

Painting and Polishing:-Applying priming coat over new wood and wood based surfaces after and including preparing the surface by thoroughly cleaning oil, grease, dirt and other foreign matter sand papering and knotting as per HPPWD specification 1990 (one thousand Nine hundred Ninety ) volume-I including carriage of materials within all leads and lifts and all incidental charges and as per the direction of Engineer-in-Charge. Ready mixed paint brushing wood primer pink :-

Painting two coats(excluding priming coat) on new wood and wood based surfaces,with enamel paint other than white to give an even shade including cleaning the surface of dirt,dust and other foreign matter sand papering and stopping as per HP. PWD. Specifications of 1990 Volume-I including carriage of materials, labour, tool and plant through all modes of transportion within all leads and lifts and as per direction of Engineer-in- Charge.

Applying priming coat over new steel & other metal surfaces after & including preparing the surface by thoroughly cleaning oil grease dirt and other foreign matter and scoured with wire brushes fine steel wool scrapers and sand paper complete With ready mixed priming paint brushing red lead,Red-oxide/zinc oxide chrome including carriage of materials, labour, tool and plant through all modes of transportion within all leads and lifts and as per direction of Engineer-in- Charge.

Painting two coats (excluding priming coat)on new steel and other metal surface under coat with ready mixed paint brusing to give an even shade including cleaning the surface all dirt,dust and other foreign matter With readymixed paint other than white including carriage of materials, labour, tool and plant through all modes of transportion within all leads and lifts and as per direction of Engineer-in- Charge.

Applying priming coat on new concrete/masonry/asbestos cement/plastered surfaces after and including preparing the surface by thoroughly cleaning oil,grease,dirt and other foreign matter and sand papering as required with Readymixed primer sq. including carriage of materials, labour, tool and plant through all modes of transportion within all leads and lifts and as per direction of Engineer-in- Charge.

Painting two coats(excluding priming coat on new concrete masonry/plaster surfaces with readymixed paint brushing for use on floors to give an even shade including cleaning the surface of all dirt,dust and other foreign matter and sand papering as required with:-- Paint other than white including carriage of materials, labour, tool and plant through all modes of transportion within all leads and lifts and as per direction of Engineer-in- Charge.

Providing plinth protection 50 mm ( fifty millimetre) thick in cement concrete 1:3:6 (one cement isto three sand isto six graded crushed stone aggregate 20mm ( twenty millimetre) nominal size including finishing the top surfaces of concrete smooth as per HP. PWD. Specifications of 1990 Volume-I including carriage of materials, labour, tool and plant through all modes of transportion within all leads and lifts and as per direction of Engineer-in- Charge. .

Miscelaneous:-Providing under layer for plinth protection of 75 mm (seventy five millimetre) thick (unconsolidated) bed dry brick / stone aggregate 40 mm ( forty millimetre) nominal size well rammed and consolidated and grouted with fine sand including preparation of ground as per HP. PWD. Specifications of 1990 Volume-I including carriage of materials, labour, tool and plant through all modes of transportion within all leads and lifts and as per direction of Engineer-in- Charge.

Providing and fixing to wall ceiling and floor galvanised mild steel tubes (light grade) tube fitting and clamps including making good the wall, ceiling and floor:-: a) 15mm nominal bore including carriage of materials up to all leads and lifts and as per the direction of Engineer-in-Charge.

Providing and fixing high pressure PVC spigot and socket, waste and ventilating pipes ISI marked including fixing with approved adhesive etc. complete 110mm (one hundred ten millimetre) dia finolex make and as per the direction of Engineer-in-Charge including carriage of materials within all leads and lifts. 110 mm dia

75 mm dia

Providing and fixing PVC (Finolex) door bend with oval access door, insertion rubber washer 3 mm thick bolts and nuts ISI marked complete including fixing with approved adhesive etc. complete including carriage of material upto all leads and lifts as per the directions of Engineer-in-charge. 75 mm dia

Providing and fixing PVC (Finolex) plain bend ISI marked including fixing with approved adhesive etc. complete including carriage of material upto all leads and lifts as per the directions of Engineer-in-charge. 75 mm dia

Providing and fixing PVC (Finolex) single equal branch with oval access door, ISI marked insertion rubber washer 3 mm thick bolts and nuts complete including fixing with approved adhesive etc. complete including carriage of material upto all leads and lifts as per the directions of Engineer-in-charge. 110 mm dia

Providing and fixing PVC (Finolex) single equal branch plain ISI marked including fixing with approved adhesive etc. complete including carriage of material upto all leads and lifts as per the directions of Engineer-in-charge. 75 mm dia

Providing and fixing PVC (Finolex) collars ISI marked including fixing with approved adhesive etc. complete including carriage of material upto all leads and lifts as per the directions of Engineer-in-charge. 110 mm dia

Providing and fixing PVC (Finolex) collars ISI marked including fixing with approved adhesive etc. complete including carriage of material upto all leads and lifts as per the directions of Engineer-in-charge. 75 mm dia

and fixing PVC floor trap ISI marked of self cleaning design including fixing with approved adhesive, cost of cutting and making good the wall and floors etc. complete including carriage of materials up to all leads and lifts. i) 110 mm X 90 mm.

Providing and fixing vitreous china water closet squatting pan (Indian type WC pan No. 20004) 580 x 400 mm in size earth work bed concrete foot rest and trap to be measured and paid separately Orissa Pattern of size 580x400 mm of Hindware and equivalent including entire carriage of materials up to all leads and lifts.

Providing and fixing vitreous china water closet wash down water closet ( European type WC pan ) of hindware or its equivalent with integral 'P' or 'S' trap i/c jointing the trap with soil pipe with approved adhesive etc. ( seat cover to measured and paid for separately including entire carriage of materials up to all leads and lifts. i)Anglo Indian (universal closet) sheet No.20012 in white shade of hindware.

Providing and fixing PVC ‘P’ or 'S' trap for water closet (squatting pan) ISI marked including jointing the trap with the pan and PVC pipe with approved adhesive etc. complete.as per the direction of Engineer-in-Charge including carriage of materials within all leads and lifts :-. (i) 110 mm one hundred & ten millimetre dia.

Providing and fixing 10 litre capasity PTMT low level flushing cistern complete with fiting such as symphonic arrangement 15 mm nominal size brass wall valve with polythin float union and cupling for connection with inlets and outlet and overflow pipe etc. including cutting holes and walls and making good the same including carriage of materials upto all leads and lifts and as per the direction of Engineer-in-Charge.

Providing and fixing P.V.C. connection pipe with brass union 45 cm. length 15mm nominal bore. including carriage of material with in all leads and lifts. and as per the direction of Engineer- in-charge.

Providing and fixing plastic seat (solid/hollow type) and cover for wash down water closet with C.P.brass hinged and rubber buffers including carriage of materials up to all leads and lifts. (I) Solid Type. (i)White plastic seat and cover with Hindware / CERA make.

Providing and fixing vitreous China wash basin with single hole for pillar tap with C.I. or M.S. brackets painted white including cutting holes and making good the same but excluding fittings including carriage of materials up to all leads and lifts. (a) Flat back (ii) 550mmx400mm

Providing and fixing kitchen sink with c.i. or M.S. bracket painted white / i/c hole wall and making good the same but excluding the fittings including carriage of materials up to all leads and lifts. Steel sink 600 X 450 X 250

Providing and fixing C.P. Brass waste for wash basin or sink including carriage of material upto all leads and lifts as per the directions of Engineer-in-Charge. (I) 32mm dia

Providing and fixing 32mm dia PVC waste pipe for wash wasin or sink inculding check nut including carriage of materials upto all leads and lifts and as per the direction of Engineer-in-Charge.

Providing and fixing 650 mm x 450mm bevelled edge mirror of superior glass mounted on 6mm thick A.C. sheet or ply wood sheet and fixed to wooden plugs with C.P Brass screws and washers as per HP. PWD. specifications of 1990 volume-I including carriage of materials, labour, tool and plant through all modes of transportion within all leads and lifts and as per direction of Engineer-in- Charge.

Providing and fixing 600 x 20mm C.P. Brass Towel rail complete with C.P. Brass brackets fixed to wooden plugs with C.P. Brass screws Chromium Plated ISI marked IS No.8934 of Jal /ESS or its equivalent as per HP. PWD. specifications of 1990 volume-I including carriage of materials, labour, tool and plant through all modes of transportion within all leads and lifts and as per direction of Engineer-in- Charge.

Providing and fixing 600 mm x 120 mm glass shelf with C.P. brass brackets and guard rail complete, fixed to wooden plugs with C.P brass screws as per HP. PWD. specifications of 1990 volume-I including carriage of materials, labour, tool and plant through all modes of transportion within all leads and lifts and as per direction of Engineer-in- Charge.

Providing and fixing PTMT soap dish with holder of approved quality and colour with steel screw and rawal plug including carriage of material upto all leads and lifts as per the directions of Enigneer-in-Charge.

Providing and fixing C.P. Brass Bib Tap with capstan head ESS-ESS/JAL make 15mm dia. including carriage of materials within all leads and lifts

Providing and fixing C.P. brass Angle cock with capasten head superiar type of heavy duty including carriage of materials upto all leads and lifts and as per the direction of Engineer-in-Charge. 15mm dia

Providing and fixing C.P. brass Pillar Tap with capasten head superiar type of heavy duty including carriage of materials upto all leads and lifts and as per the direction of Engineer-in-Charge. 15mm dia

Providing and fixing brass full way valve with wheel:- 20 mm (twenty millimetre) nominal size and as per the direction of Engineer-in-Charge including carriage of materials within all leads and lifts :-

Making connection of galvanised steel distribution branch with galvanised mild steel main 20mm to 40mm twenty to forty millimetre nominal bore by providing and fixing tee including cutting and threading the pipes complete including carriage of materials up to all leads and lifts as per the direction of Engineer-in-Charge

Providing and fixing 110 mm PVC cowl ISI marked including fixing with approved adhesive etc. complete as per HP. PWD. specifications of 1990 volume-I including carriage of materials, labour, tool and plant through all modes of transportion within all leads and lifts and as per direction of Engineer-in- Charge. (110 mm size)

Providing and fixing C.P. Grating 100 mm including carriage of material upto all leads and lifts as per the direction of Engineer-in-Charge.

Construction of man hole with RCC top slab in 1 : 2; 4 ( 1cement : 2 sand : 4 graded stone aggregate ) 20 mm nominal size foundation concrete 1:4:8 ( cement : 4 sand : 8 graded stone aggregate ) 40 mm nominal size , in side plastering 15 mm thick with cement motor 1:3 finished with a floating coat of neat cement and making channels in cement concrete 1:2:4 (1cement : 2 sand : 4 graded stone aggregate ) 20 mm nominal size finished smooth complete including curing complete and testing the same :- In side size 800 x 800 mm and 500 mm deep including CI cover with frame light duty 455mm x 610 mm internal dimension total rate of cover and frame to be not less then 38 kg With 200mm thick walls of brick masonry using common burnt clay building bricks in cement mortar 1:3 ( one cement three sand) including entire carriage of material in all leads and lifts as per the direction of Engineer-in-Charge.

Providing and fixing PVC water storage tank of ISI: 12701 marked, G.I. inlet and outlet connection, 15mm nominal bore ball valve and mosquito proof PVC cover with locking arrangement including hoisting up to all heights above ground level and as per the direction of Engineer-in-Charge including carriage of materials up to all leads and lifts.(i) 1000 one thousand litres net capacity tank.

Providing and fixing PTMT jet spray of approved quality and colour with one metre tube. including carriage of material upto all leads and lifts as per the direction of Engineer in Charge.

Construction chamber 300mm x 300mmx500mm inside size for stop cock with C.I. surface box 100mm x 100 mm x 75mm (inside) with hinged cover fixed in cement concrete slab 1:2:4 mix (1 cement : 2 sand 4 graded stone aggregate 20mm nominal size) 75mm thick foundation concrete 1:5:10 ( 1cement : 5 sand : 10 grades stone aggregate 40 mm nominal size) and inside plastering with cement mortar 1:3 (1 cement :3 sand) finished with a floating coat of neat cement including curing complete with 100 mm thick walls of brick masonry in cement mortar 1:5 (1 cement: 5 sand) including entire carriage of material in all leads and lifts as per the direction of Engineer-in-Charge.

RAJESH KUMAR