Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹25.3 LAccepted-AOC | L1 | Accepted-AOC Being overall reasonable | |
| 2 | L2₹26.4 L+₹52,495 (2.03%)Rejected-Finance | L2 | Rejected-Finance Not lowest bidder | |
| 3 | L3₹27.0 L+₹1.1 L (4.43%)Rejected-Finance SR NO 281 3 7 ANAND NAGAR NEAR DHANORI JAKAT NAKA LOHEGAON PUNE 411047 | PUNE | PUNE | MAHARASHTRA | 411047 | L3 | Rejected-Finance Not lowest bidder | |
| 4 | L4₹27.6 L+₹1.7 L (6.68%)Rejected-Finance S NO 12 LAXMINAGAR YERWADA PUNE 411006 | PUNE | MAHARASHTRA | 411006 | L4 | Rejected-Finance Not lowest bidder | |
| 5 | L5₹29.9 L+₹4.0 L (15.6%)Rejected-Finance AT POST SONAJ TAL MALEGAON DIST NASHIK | MALEGAON | NASHIK | MAHARASHTRA | L5 | Rejected-Finance Not lowest bidder |
Tender Value
₹45 L
EMD Value
₹90,000
Closing Date
6 Jul 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE CENTRAL KHADKI
GE CENTRAL KHADKI RANGE HILLS ROAD KHADKI PUNE-411003
COMPREHENSIVE REPAIR / MAINTENANCE WORKS IN OTM ACCN IN ZONE A AREA OF AGE B/R-I (C) UNDER GE (CENTRAL) KHADKI.
2023_MES_602004_1
8830/E8 OF 2023-2024
Open Tender
Civil Works
Item Rate
270 days
ZONE A area
AS PER NIT
7 documents required · 7 mandatory
₹500
GE CENTRAL KHADKI
₹90,000
Yes
25 Sept 2023
8 Jun 2023
8 Jul 2023
8 Jun 2023
6 Jul 2023
24 Jun 2023
8 Jun 2023 - 17 Jun 2023
Amount
NOTE FOR PLUMBING AND SANITARY ITEMS:- (i) Contractor shall deposit entire quantity of plumbing and sanitary wares materials required / covered under subject contract in the custody of Engineer-In-Charge/ Office in charge of unit. (ii) The materials as required shall be issued to contractor by JE/ Engineer-In-Charge on daily basis. (iii) make specified in BOQ will supersede to all.
Taking down chowkhat or frame n. exc 1.5 Sqm each but with shutter (without taking off shutter from the frame) complete all as specified and as directed.
Taking down chowkhat or frame exc. 1.5 Sqm but n. exc 4 Sqm each but with shutter (without taking off shutter from the frame) complete all as specified and as directed.
Taking down shutter of any description exceeding 1 Sqm but n. exc 2 Sqm each complete all as specified and as directed.
Taking down shutter of any description but exceeding 2 Sqm each complete all as specified and as directed.
Supply and fix pressed steel frames of size 105x60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, tarring back of chowkhats & holdfast etc, complete all as specifed and as directed.
Supply and fix pressed steel frames of size 125x60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, tarring back of chowkhats & holdfast etc, complete all as specifed and as directed.
Supply and fix first class hard wood Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints etc complete all as specifed and as directed.
Material and labour cement concrete type C-0 (1:3:6) (using 12.5mm graded aggregate) as in pressed steel door frame (backfil), complete all as specified and as directed.
Material and labour cement concrete type C-1 (1:3:6) (using 20mm graded aggregate) as in hold fast, complete all as specified and as directed.
Supply and fix 35mm thick second class hard wood factory maid plain, framed paneled shutter (two panel) with lock rail and panel of 9mm BWP commercial ply or 12mm venered partical board with commercial veneering on both side faces. The size of rail and stile as per ISI 1003 (Part-I), kiln seasoned and chemically pressure treated (factory made shutter) complete all as specified and as directed.
Supply and fix 30mm thick flush shutter, solid core construction, with block board core plywood face panels, commercial type on both sides, chemically treated against termite infestation, complete all as specified and as directed.
Supply and fix 30mm thick first class hard wood glazed and skelton shutter, wire mesh, open rebated and prepared to receive glass, gauze, etc. (without sach bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass/gauge, etc size of shutters including wire mesh as specified in SSR-I, complete all as specified and as directed.
Supply and fix factory made solid PVC door frame of size 50mm x 47mm single revated made out of extruded 5mm plain colour PVC sheet reinforced with M.S. Square tube etc complete all as specified and as directed.
Providing and fixing 30mm thick FACTORY MADE MOULDED DOOR SHUTTER ‐ WOOD FREE consisting of frame made out of M.S. tubes of 19 gauge thickness and size of 25mm x 25mm for stiles, top and bottom rails. M. S. frame shall have a coat of steel primers. The inner panel shall consist of 25mm thick EPS of Density 23 Kg /Cbm. bonded with 2mm thick termite proof, water proof and fire resistant moulded PVC Sheet Manufactured by an ISO‐9001‐2015 certified company, with 2, 4, 6 raised panel design in different plain and / or prelam colours after routing the Moulded design on one side & 2mm plain and /or prelam PVC sheet on other side of the EPS. The edge of panel to be sealed with lipping of 15mm wide PVC sheet baton ( made by sticking 2mm rigid foam PVC sheets of 5mm (±0.25) thickness using PVC solvent cement ) and stile sides 25mm (5mm x 5nos.) thick and 30mm width PVC Sheet fitted along M.S. tube for hardware provision & for lock 25mm thick ( 5mmx5nos. ) PVC sheet of size 150mm x 200mm fixed with inner side of EPS Panel etc. complete all as per specification & drawing and as directed by Engineer-in-charge. MAKE :- Rajshri/Sintex/Accucel/Duraplast
Material and labour powder coated aluminium (minium thickness of polyester powder coating 50 micron ) work for fixed frame portion and shutters for doors, sliding door (any track), openable/sliding windows, ventilators, partition sliding/openable with extruded built up standard tubular section/appropriate Z section and other section conforming to IS :733 and IS 1285 fixed with rawl plugs and screws or with fixing clips or with expansion hold fasteners including necessary filling up of gaps at junction, at top,bottom and sides with required EPDM rubber/neoprene gasket roller etc aluminium section shall be smooth, rust free, straight, mitered and jointed mechanically wherever required including cleat, angle, aluminium snap beading for glazing/gauged/panelling, CP brass/stainless steel screws, complete all as specified and as directed.
Supply and fix aluminium powder coated grill (DECO grill) fixed to aluminium door/window/ventilator frame including all fixing arrangement including channels, screws U of F section etc complete all as specified and as directed.
Supply and fix 5mm thick float glass, tinted/smoked shape fixed to frame/shutter for Aluminium door/window/partition etc including aluminium powder coated snap beading and rubber gasket, complete all as specified and as directed.
Supply and fix in repair aluminium composite panel sheet of 4mm thick which consist of 3mm thick thermoplastic core of anti-toxic LDPE sandwiched between 2 skins of 0.5mm thick aluminium foils with outer surface finished with 30 µ PVDF and inner surface finished with a thin coat of polyester paint, fixed in panel to aluminium frame including all necessary frame work or powder coated snap beading and rubber gasket complete all as specified and as directed.
Supply and fix butt hinges, 100mm long, extruded aluminium alloy with galvanised mild steel hinge pin, complete all as specified and as directed.
Supply and fix 140mm size floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor, complete all as specifed and as directed.
Supply and fix in repair 140mm size floor door stopper of aluminium alloy body and tongue, inodised, with hard drawn steel spring, fixed in floor for aluminium/wooden door, complete all as specified and as directed.
Supply and fix aluminium (Die cast) door closure hydrauically regulated, designation, No-2, universal type suitable for door shutter of 701 to 850mm in width and of weight between 36 to 60Kg and fixed, complete all as dpecified and as directed.
Supply and fix in repair aluminium (Die cast) door closure hydrauically regulated, designation, No-2, universal type suitable for door shutter of 701 to 850mm in width and of weight between 36 to 60Kg and fixed, complete all as dpecified and as directed.
Supply and fix 180mm size powder coated (any tint) aluminium "Americal Handle" fixed to aluminium door with suitable screws, complete all as specified and as directed.
Supply and fix in repair 180mm size powder coated (any tint) aluminium "Americal Handle" fixed to aluminium door with suitable screws, complete all as specified and as directed.
Supply and fix double action floor spring hydraulically regulated made up of minimum 1.25mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed complete all as specified and as directed.
Supply and fix in repair double action floor spring hydraulically regulated made up of minimum 1.25mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed complete all as specified and as directed.
Supply and fix aluminium alloy, anodised, sliding door bolt 250mm long, with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy 12mm dia, complete all as specified and as directed.
Supply and fix in repair aluminium alloy, anodised, sliding door bolt 250mm long, with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy 12mm dia, complete all as specified and as directed.
Supply and fix brass mortice lock vertical type 100mm size, 4 lever fixed in aluminium shutter, complete all as specifed and as directed.
Supply and fix in repair brass mortice lock vertical type 100mm size, 4 lever fixed in aluminium shutter, complete all as specifed and as directed.
Supply and fix aluminium anodised, barrel tower bolt 200mm long, powder coated of extruded section and fixed complete all as specifed and as directed.
Supply and fix in repair aluminium anodised, barrel tower bolt 200mm long, powder coated of extruded section and fixed complete all as specifed and as directed.
Supply and fix in repair extruded brass handles, fabricated type polished 150mm long fixing with screws etc complete all as specifed and as directed.
Supply and fix mild steel 300mm, ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and as directed.
Supply and fix in repair, powder coated door seal fixed with screws to any type of shutter, complete all as specified and as direccted.
Material and labour repairing any type of aluminium/wooden door shutter and refixing in the same opening after resecuring its frame work by means of tightning with new screws of by aluminium angle, cleat and other connected work complete all as specifed and as directed.
Supply and fix factory made box type steel window composite type with double rebate pressed steel frame 80mmx60mm (peripheral) and 80mmx75mm (intermediate members) including grill using 10sqmm bar, made out of cold rolled 1.25mm thick sheet having steel window/ventilators double shutter of MS tubular section of size 50mmx20mmx1.1mm thick fixed with box type hinges including 12mmx3mm MS flat as beading for glazed and wire shutter handle of 100mm MS hollow tubular section as beading for wire and putty for glazing shutter handle of 100mm size made of z section 01 no, MS stove enamelled black tower bolt of size 120mm, 02 nos, 150mm mild steel hooks and eyes, each shutter flat iron 40mmx1.25mm and 200mm long hold fast 04 nos each window including filling with PCC (1:3:6) complete all as specified and as directed.
Supply and fix galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and as directed.
Supply and fix aluminium alloy wire cloth, 0.45mm nominal dia of wire and average width of aperture 1.40mm and fixed with aluminium wire staples etc complete all as specified and as directed.
Hacking out old broken glass (any thickness, size, quality or description) from wooden/steel frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads, complete all as specified and as directed.
Supply and fix plain sheet glass 4mm thick, ordinary quality, not exc 0.50 Sqm in each pane fixed to aluminium door/window and steel window/frame with oil putty and securing pins, spring clips etc complete all as specified and as directed.
Taking down mild steel rolling shutters/collapsible steel gate of any size and description, complete all as specified and as directed.
Supply and fix 1.25mm thick steel rolling shutters without ball bearing as specified of push pull or manual type as specified, including top cover, anchoring rod, hasp & staple and one coat of primer and two coat of synthetic enamel paint; erected in position as indicated complete all as specified and as directed.
Supply and fix 1.25mm thick steel rolling shutters without ball bearing or gear operated type with bevel gear box and crank handle as specified, including top cover, anchoring rod, hasp & staple and one coat of primer and two coat of synthetic enamel paint; erected in position as complete all as specifed and as directed.
Supply and fix collapsible steel gate, top hung, consisting of channel picket, pivoted flat bars, top and bottom runners, brass handle etc, as specified;erected in position and securing runners with holdfast and bracket and one coat of primer and two coat of synthetic enamle paint, complete all as specifed and as directed.
Material and labour overhauling, servicing and realignment of rolling shutters of area not exc 12 Sqm including replacement of defective bearing and grinding of wheels for smooth movement of shutter, replacement of clamps, bolt, gear box with crank handle etc including cleaning, oiling and greasing of movable parts and welding work all as specified and as directed. NOTE :- (i) Necessary arrangement of crane/moving ladder shall be made by the contractor without any extra cost)
Material and labour overhauling, servicing and realignment of rolling shutters of area exc 12 Sqm including replacement of defective bearing and grinding of wheels for smooth movement of shutter, replacement of clamps, bolt, gear box with crank handle etc including cleaning, oiling and greasing of movable parts and welding work all as specified and as directed. NOTE : - (i) Necessary arrangement of crane/moving ladder shall be made by the contractor without any extra cost)
Material and labour preparation of new or previously untreated wooden surface of any description over 10 cm in width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed.
Material and labour preparation of new or previously untreated steel surface of any description over 10cm in width or girth and applying two coat of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed.
Dismantling of wall and ceiling boards (fibre, pulp, insulation, PVC panelling etc) or insulation boards /slabs/blankets any thickness, including cover fillets complete all as specified and as directed.
Supply and fix solid PVC wall lining consisting of 5mm thick plain colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame as approved by GE complete all as specified and as directed.
Supply and fix 5mm thick PVC sheet fillet of width 35mm for wall panelling inclusive of fixing on to wall to make PVC frame as per specification etc complete all as specified and as directed.
Taking down steel / iron gates area not exc 10 Sqm each including hold fasts and re-fixing the gates in the same opening including shifting and fixing of existing holdfast in plain cement concrete (1:2:4), type B-1 after raising the gate level including greasing, painting and other necessary minor repairs complete all as specified and as directed.
Supply and fix E-board 'Everest' make 600x600x4mm thick white prelaminated sett embosed reinforced designer ceiling board tiles of approved texture at all height laid on Hot dipped Galvanised iron imposed grid with 24mm wide T-section exposed flanges which shall be powder coated white. The frame work shall comprise of main runner made from 0.33mm thick GS sheet and of size 24x32x3000mm and spaced at 1200mm centers securely fixed to the structural soffits by approved hangers at 1200mm maximum centers. Hangers of GI wire 4mm dia to be fixed by approved rawl plug, level and justers and screws etc. The last hanger at the end of each main runner shall not be greater than 450mm from adjacent wall. Flush fitting of 1200mm long cross tee (with double stitching) to be interlocked between main runners at 600mm center to form 1200x600mm modules cross tee longer than 600mm to be supported independently. 600x600mm modules to be formed by fitting 600mm long cross Tee centrally between the 1200mm cross tee. Tee, Perimeter wall angle shall be of 0.45mm thick GS sheet of size 19x19mm and 300mm long of white colour all as per manufacture instruction, including taking down old/ existing ceiling boards any type (fibre, pulp insulation etc) or inslutation boards any thickness incl fillets complete all as directed.
Supply and fix in repair PLEATED pleased blinds made of polyester fabric with alumnium coating at its back. Pleates of one inch with segments at the interval of not exceeding 100mm top and bottom channels made of aluminium in matching colours. Cord lock and pulleys made of brass, design and type as approved by GE complete all as specified and as directed.
Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specifed and as directed.
Material and labour framed work as in doors or gates of angle or other section (i.e flat/tubular) with gusset plates, rails, braces of Fe-410-W (Gde-E-250) quality-B, etc. complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges/holdfast or steel hanging door fittings in plain cement concrete (1:2:4), type B-1 (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete all as specified and as directed.
Supply and fix 1mm thick mild steel, plain, black sheet in wall cladding, steel gates and similar work, cut to size, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40 mm lap joints with riveted or welded seams, including bending or turning up, mitred angles, etc as per required at site complete all as specified and as directed.
Demolition of brickwork or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars etc, but excluding ashlars facings, dressed stonework and precast concrete articles and removing the debris outside the defence land complete all as specified and as directed.
Material and labour brick work with fly ash old size bricks, straight or curved on plan exceeding 6m mean radius, built in cement mortar 1:4 in any position, complete all as specifed and as directed.
Material and labour brick work with fly ash old size bricks, straight or curved on plan exceeding 6m mean radius, built in cement mortar 1:6 in any position, complete all as specifed and as directed.
Material and labour 15mm thick rendering on brick /concrete or dubbed surface in CM 1:4 with water proofing compound finishing even & smooth without using extra cement and similar like etc complete all as specifed and as directed. NOTE :- water proofing compound shall be measured & paid separetely
Material and labour 15mm thick rendering on brick /concrete or dubbed surface in CM 1:6 with water proofing compound finishing even & smooth without using extra cement and similar like etc complete all as specifed and as directed. NOTE :- water proofing compound shall be measured & paid separetely
Material and labour 15mm thick rendering on brick /concrete or dubbed surface in CM 1:4 with water proofing compound finishing even & smooth without using extra cement and similar like at any height including necessary scaffolding , ladder & formwork including taking down cement plaster, raking out joints, hacking for key & scrubbing down with water and removing the debris outside defence land complete all as specifed and as directed. NOTE :- water proofing compound shall be measured & paid separetely
Material and labour 15mm thick rendering on brick /concrete or dubbed surface in CM 1:6 with water proofing compound finishing even & smooth without using extra cement and similar like at any height including necessary scaffolding , ladder & formwork including taking down cement plaster, raking out joints, hacking for key & scrubbing down with water and removing the debris outside defence land complete all as specifed and as directed. NOTE :- water proofing compound shall be measured & paid separetely)
Supply only liquid water proofing compound complete etc all as specified and as directed.
Material and labour preparing new plastered surface of walls and applying two coats of cement base paint at any height including necessary scaffolding ladder etc complete all as specifed and as directed.
Material and labour preparing new plastered surface of walls and applying two coat of oil bond distemper over a coat of alkali resistant primer at any height including necessary scaffolding ladder etc complete all as specifed and as directed.
Material and labour rendering 10mm thick on concrete surfaces in cement mortar 1:3 finishing even and smooth without using extra cement to RCC ceiling, chhajjas, roof projection, facia, fins, parapet etc. and similar likes upto height 10 mtr including necessary scaffolding, ladder, formwork and including taking down cement/lime plaster of any description including raking out joints hacking for key scrubbing down with water etc and removing the debris outside the defence land complete all as specified and as directed.
Material and labour preparation of new plastered surfaces of ceiling, chhajjas, roof projection, facia, fins, parapet etc and applying three coats of white wash complete all as specifed and as directed.
Material and labour complete removal of existing treatement/old plastered/concrete surface from internal surface of wall by wire brushes & stopping of surfaces & levelling/edging the disturbed places/edges using necessary filling compound of Birla/JK wall care putty to obtain smooth regular/even finish using sand paper and applying two coat of oil bound distemper upto height 10 mtr etc complete all as specified and as directed.
Material and labour vitrified tiles light shade 10mm thick (square/rectangular) polished area of each tile 600mm x 600mm/605mm x 605mm over and including 15mm thick screed bed or bedding layer in CM 1:6 for laying floor finishes, set and jointed in neat cement slurry and pointed in white or coloured cement to match including dismantling and removing the debris outside the defence land complete all as specified and as directed. MAKE :- SOMANY(GRANDE VEGAS GOLD FP, DURAGRES SERIES) OR TECHNO COMMERCIALLY EQUIVALENT IN JOHNSON / KAJARIA (POLISHED SERIES) / RAK
Description all as per ser item No 74 above but in skirting and dado laid over and incl 10mm thick rendering in CM 1:4 and pointing including dismantiling and removing the debris outside the defence land complete all as specified and as directed. MAKE :- SOMANY(GRANDE VEGAS GOLD FP, DURAGRES SERIES) OR TECHNO COMMERCIALLY EQUIVALENT IN JOHNSON / KAJARIA (POLISHED SERIES) / RAK
Material and labour non-skid coloured ceramic tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm over & including 15mm thick screed bed or bedding layer in CM 1:6 for laying floor finishes, set and jointed in neat cement slurry and poited in white or coloured cement to match including dismantling and removing the debris outside the defence land complete all as specified and as directed. MAKE :- SOMANY(REVEL LIGHT, VISTOSO SERIES) OR TECHNO COMMERCIALLY EQUIVALENT IN JOHNSON / KAJARIA (POLISHED SERIES) / RAK
Description all as per Ser item No 76 above but in skirting and dado laid over and incl 10mm thick rendering in CM 1:4 and pointing including dismantiling and removing the debris outside the defence land complete all as specified and as directed. MAKE :- SOMANY(REVEL LIGHT, VISTOSO SERIES) OR TECHNO COMMERCIALLY EQUIVALENT IN JOHNSON / KAJARIA (POLISHED SERIES) / RAK
Material and labour non-skid coloured ceramic tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.06 Sqm but not exceeding 0.11 Sqm over & including 15mm thick screed bed or bedding layer in CM 1:6 for laying floor finishes, set and jointed in neat cement slurry and poited in white or coloured cement to match including dismantling and removing the debris outside the defence land complete all as specified and as directed. MAKE :- SOMANY(REVEL LIGHT, VISTOSO SERIES) OR TECHNO COMMERCIALLY EQUIVALENT IN JOHNSON / KAJARIA (POLISHED SERIES) / RAK
Material and labour glazed coloured ceramic tiles External/Internal in vertical surface 300mm x 450mm x7mm /300mmx600mmx7mm thick over & including 10mm thick rendering in CM 1:4 set and jointed in neat cement slurry and pointed in white or coloured cement to match including dismantling and removing the debris outside the defence land complete all as specified and directed. MAKE :- SOMANY (ELOGIO LIGHT, GLOSTRA SERIES) OR TECHNO COMMERCIALLY EQUIVALENT IN JOHNSON / KAJARIA (POLISHED SERIES) / RAK
Material and labour machine cut kota stone slab flooring 20-25mm thick laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing to mirror finish laid over 20mm thick Screed bed or beddidng layer in CM 1:6 for laying floor finishes including dismantling and removing the debris outside the defence land complete all as specified and as directed.
Material and labour machine cut kota stone slab in riser of steps, skirting, dado 20-25mm thick over & including 10mm thick rendering in CM 1:4 laid & jointed with grey cement slurry mixed with pigment to match the shade of slab including rubbing and polishing to mirror finish including dismantling and removing the debris outside the defence land complete all as specified and as directed.
Material and labour cement concrete 25mm thick type B-0, 1:2:4 (12.5mm graded aggregate) as in flooring complete all as specifed and as directed.
Material and labour granite 20mm thick work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms, vertical surface of wall also and like in 12mm thick screed bed or bedding layer cement mortar (1:3) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including dismantling and removing the debris outside the defence land complete all as specified and as directed.
Supply and fix 15mm bore tubes, 'medium grade' galvanised, with all fitting and fixed complete to wall and ceiling or laid in floors including necessary cutting chasing into wall/concelled including taking down old steel tubing etc complete all as specified and as directed.
Supply and fix 20mm bore tubes, 'medium grade' galvanised, with all fitting and fixed complete to wall and ceiling or laid in floors including necessary cutting chasing into wall/concelled including taking down old steel tubing etc complete all as specified and as directed.
Supply and fix in repairs for 75mm bore PVC (SWR) pipe single socket in any length with rubber ring joints, laid in trenches, wall, floors or laid in sunken floor etc complete all as specifed and as directed.
Supply and fix in repairs 75mm bore PVC bends, branch piece or similar fitting are reqd to make the system functional complete all as specified and as direced.
Supply and fix in repairs PVC floor trap 75mm complete all as specifed and as directed.
Supply and fix in repairs for 110mm bore PVC (SWR) pipes single socketed , in any length with rubber ring joints, laid in trenches or in floors or fixed on wall etc complete all as specifed and as directed.
Supply and fix in repairs for 110mm bore PVC (SWR) bends, branch piece or similar fitting are required to make the system functional complete all as specifed and as directed.
Supply and fix in repairs 110mm bore PVC (SWR) junction single, (Single T), equal or unequal fitting as reqd to make the system functional complete all as specifed and as directed.
Material and labour disconnecting of existing PVC tank of capacity Exc 250 Ltr & n. exc 500 Ltrs for cleaning including setting aside temporarily and refixing later in same position for water supply to enable water proofing treatement of roof slab beneath the tank in following laid down process all as specifed and directed. (a) Dewatering & removing all settled slit,scale & dust from inside from tanks using coconut brush manually and applying bleaching powder and allowed to rest 1 hour. (b) Cleaning & rinsing the tank using fresh water to wash out complete and allowed to dry for 30 mins. (c) Writing letters of 7 cm height using synthetic enamel paint (white colour) to mention date of cleaning incl rubbing out old letters written over the tank. (d) Re-fixing the tank with fitting as required in same position or raised/lower height after cleaning of water (as may necessary) complete all as specified and as directed.
Material and labour disconnecting of existing PVC tank of capacity Exc 500 Ltr & n. exc 1000 Ltrs for cleaning including setting aside temporarily and refixing later in same position for water supply to enable water proofing treatement of roof slab beneath the tank in following laid down process all as specifed and directed. (a) Dewatering & removing all settled slit,scale & dust from inside from tanks using coconut brush manually and applying bleaching powder and allowed to rest 1 hour. (b) Cleaning & rinsing the tank using fresh water to wash out complete and allowed to dry for 30 mins. (c) Writing letters of 7 cm height using synthetic enamel paint (white colour) to mention date of cleaning incl rubbing out old letters written over the tank. (d) Re-fixing the tank with fitting as required in same position or raised/lower height after cleaning of water (as may necessary) complete all as specified and as directed.
Material and labour vitreous China squatting pan, ‘Orissa’ pattern, size 580 x 440 mm (23" approx) white, with integral foot rests including PVC(SWR) 'P' or 'S' trap connecting to flush pipe and to anti syphonage pipe, all as per Prayag Cat Part No 4055 or techno commercially equivalent makes specified in PS. complete including making good to floor fixed in repair complete all as specified and as directed.
Material and labour vitreous china wash down water closet pan (EWC), white (excluding fixing bolts, flushing cistern and flush pipe) all as per Prayag cat Part No.4018 or 4019 or techno commercially equivalent makes specified in PS fixed as in repair, complete all as specified.
Supply and fix in repairs plastic water closet seat white closed pattern with flat bottom and cover and mild steel chromium plated hinging device any type (as per site requirement any type any size), ISI marked fixed complete all as specifed and as directed.
Supply and fix vitreous china bowl urinal flate back size 330x250x445 mm wall mounted (minimum), with Waste coupling of CP, (excluding flushing cistern, flush pipe and waste pipe) including fitting of push cock with exting GI Tubing all as per Prayag Cat No 4999 or techno commercially equivalent makes specified in PS fixed in repair complete all as specified and as directed.
Supply and fix PVC valveless, syphonic action type, Smart flushing cistern, 10ltr capacity, low level, white, with inlet, ball valve, float and handle including brackets, connections to pipes and fixing of chain and pull, or lever, all as per Prayag cat Part No.501 or techno commercially equivalent makes specified in PS fixed as in repair, complete all as specified.
Supply and fix in repair 32 mm bore and 800mm long PVC waste pipe suitable for WHB, Urinals etc all as per Prayag Cat No 3271 or technocommercially equivalent make complete all as specified and directed.
Supply and fix in repair PVC symphon with complete set any type/any size as per site requirement) for low level PVC cistern of 10 Ltr capacity as per sample complete all as specifed and as directed.
Supply and fix in repair PVC flush pipe/Bend (long/short) for low level PVC flushing cistern 40mm bore etc complete all as specifed and as directed.
Supply and fix in repair 15mm bore stop valve, chromium plated fancy type with crutch or butterfly handle screwed down, screwed both end for iron pipe or brass ferrule with long shank and cup for 15 mm bore of pipe complete all as per Prayag Cat Part No 8326/8328 or techno commercially equivalent makes specified in PS complete all as specified and as directed.
Supply and fix angle cock, 15mm dia, cast copper alloy, chromium plated, fancy type with crutch or butterfly handle screw down, screwed both ends for iron pipe or for brass ferrule all as per Prayag Cat No 8310 or techno commercially equivalent makes specified in PS fixed in repair complete all as specified and as directed.
Supply and fix bib taps 15mm dia, cast copper alloy chromium plated, with CP flange all as per Prayag Cat No 8306 or techno commercially equivalent makes specified in PS fixed in repair complete all as specified and as directed.
Supply and fix PVC connections 15mm dia with brass nut on both ends and washers 450mm long all as per Prayag Cat No 323-ZK or techno commercially equivalent makes specified in PS fixed in repair complete all as specified and as directed.
Supply and fix PVC connections 15mm dia with brass nut on both ends and washers 600mm long all as per Prayag Cat No 324-ZK or techno commercially equivalent makes specified in PS fixed in repair complete all as specified and as directed.
Supply and fix PVC connections 15mm dia with brass nut on both ends and washers 900mm long all as per Prayag Cat No 326-ZK or techno commercially equivalent makes specified in PS fixed in repair complete all as specified and as directed.
Supply and fix grating doom 125mm dia with waste hole of PTMT (min wt 40g) all as per Prayag Cat No 113 or techno commercially equivalent makes specified in PS fixed in repair complete all as specified and as directed.
Supply and fix in repair 2 in 1 health Faucet (1.00 metre braided tube) with ABS wall hook all as per Prayag Cat Part No.BEA-100-S or techno commercially equivalent makes specified in PS, with 1 meter SS Braided connection pipe complete all as specified and as directed.
Supply and fix in repair pillar taps chromium plated cast copper alloy with capstan heads screwed down high pressure with or without lettered Hot Or Cold With long screwed shanks and fly nuts screwed for iron pipes 15mm bore dia pipe complete all as per Prayag Cat Part No 8304 or techno commercially equivalent makes specified in PS complete all as specified and as directed.
Supply and fix in repair vitreous china one piece wash basin white flat back size 550 x 400 mm excluding taps waste chain and plug and porcelain stopper but incl necessary brackets CP wastes and other fittings complete all as specified and as directed. MAKE :- Prayag Cat Part No 4645 or techno commercially equivalent makes specified in PS
Supply and fix in repair vitreous china one piece table top wash basin of size 410x315x105mm /under counter wash basin of size 460x310x220mm, white or ivory colour flat back or oval type, any size excluding taps, waste chain and plug and porcelain stopper but including brackets any size, including cutting for and pinning in ends of brackets or erecting stand stand but exclusive of fixing of suppy and waste pipe etc fixed complete all as specified and directed. MAKE :- Prayag Cat Part No 4701/4793 or techno commercially equivalent makes specified in PS
Supply and fix in repair rotational moulded polythylene water storage tanks 1000 liters capacity (three layered), ISI marked cylindrical vertical with closed top including 3 Nos GI check nuts and tank nipple of 20mm bore for inlet and outlet, 20mm bore ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball hoisted and fixed in position all as specifed in SSR Part I complete all as specifed and as directed.
Supply and fix in repair rotational moulded polythylene water storage tanks 500 liters capacity (three layered), ISI marked cylindrical vertical with closed top including 3 Nos GI check nuts and tank nipple of 20mm bore for inlet and outlet, 20mm bore ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball hoisted and fixed in position all as specifed in SSR Part I complete all as specifed and as directed.
Supply and fix in repair Harrison rails, anodised aluminium alloy with fixing brackets, stops, rollers etc complete all as specified and as directed.
Shri Sant Cosntruction
VP DEVELOPERS AND CONTRACTOR
S M MISHRA
MAHESH DADAJI BACHHAV
V.R.PRAJAPATI AND CO.
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .