8987 CERTAIN REPAIRS TO ROOF TREATMENT AND CONNECTED WORK AT ZONAL CANTEEN MAST BLDG FIRE STATION BLDG AND OTHER AREAS OF ND DOCKYARD UNDER AGE BR II GE NW KUNJALI

Amount

Complete removal of existing water proofing treatment of any description in any position including roof tiles,PCC.brick bat coba,upto any thickness cleaning, wire brushing, watering and removing of debris upto 15km or further distance as directed complete all as specified and as directed

M & L PCC (1:2:4) type B-1 (using 20 mm graded stone aggregate) as in roof/chajja padding for maintaining roof/chajja slope complete all as specified and as directed

M&L for applying oil bound primer @ 0.40 Litre/Sqm manufactured by the same agency as that of APP with density of 0.87 to 0.89 Kg/Litre at 25 degree cesius on the prepared dry roof surface and provide and lay 4mm thick APP modifed water proofing membrane reinforced with non-wooven polyster matt with physical properties as given in particular specification. The laying shall be done through authorized applicator of manufacturer as specified in particular specifications. Provide over the membrane finishing with two coats of solar reflective bituminous aluminium paint @ 0.10 Kg/sqm as prescribed by manufacturer of membrane etc complete all as per particular specification , manufacturers instructions and as directed . Note : Rate inclusive of taking down and re fixing of existing lightning arrestor system including povision of new PCC block for damaged PCC block complete as directed by Engineer-in-charge

M&L for brushing neat cement slurry with 3Kg of cement per square metre all as specified and directed.

M&L for rendering 20 mm thick cement plaster in CM (1:3) on roof top surface finished even and fair including WPC by weight of 3% of total cement content complete all as specified and as directed. Note : WPC shall be measured and paid seperately

Supply only integral water proofing compound complete all as specified and as directed.

Excavation in post holes in hard/dense soil (or smilar holes) each n exc 0.5 cum getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25cm, watering and removing surplus soil to a distance n exc 50m and making good surface complete all as specified and directed

M&L for PCC 1:2:4 type B-1, (using 20mm graded aggregate) as in foundation, filling mass concrete ,grouting of angle posts, pillars etc including necessary form work complete all as specified and directed.

S&F roof trusses (framed), trussed, purlins,crane gantries, rails and fastnings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc.conforming to Fe 410-W (Gde- E-250) quality 'A' complete all as specified and as directed..

S&F for rolled mild steel sctions of grade Fe 410-W (Gde-E-250) quality-A as in stairs (framed) including stringers, treads, landing, balusters, hand rails etc, including cleats, brackets etc. all as specified and directed.

S&F Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment of Fe 410-W ( Gde-E-250 quality-A).

S&F pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified

S&F pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, chajjas, valley gutter, ridge and fixed with crumple joint etc fixed with self tapping screws as specified.

Demolition of brick work/stone masonry built in cement mortar including all quoins, arches, pillars etc but excluding ashlar facings, dressed stone work and precast concrete articles including coping complete all as specified and directed.

M & L for preparation of new steel surfaces exc 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed .

S&F 1mm thick Plain, galvanised, mild steel sheeting in valley gutters, eaves, hips, drip and straight flashing (length and girth as fixed) with grade of zinc coating 275 complete all as specified & directed.

M&L brick work with sub class B bricks straight or curved on plan exceeding 6 m mean radius built in CM 1:6 complete all as specified and as directed.

M&L for brick work with sub class 'B' bricks , straight or curved on plan to any radius in half brick thick wall built in CM 1:4 complete all as specified and as directed.

Taking down eaves gutters and rainwater pipes( any size or pattern) , including all fittings, heads, shoes, bends , swan necks, etc, removal to store (measured overall as fixed along the centre line over fittings and accessories).

S &F 160 mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wall complete all as specified and directed.

S &F 110 mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wall complete all as specified and directed.

S & F UPVC pipes of pressure rating 10 Kgf/cm2 fixed complete to walls, celing etc or in floors etc 25 mm bore pipe complete all as specified and as directed.

S&F for PVC (SWR) bends any radius 160mm bore complete all as specified and as directed

S&F for PVC (SWR) bends any radius 110mm bore complete all as specified and as directed

M&L for machine pressed pavers terracotta (coloured) cement tiles of size 250mm x 250mm x 22mm/ 300mm x 300mm x 22 mm thick mix with grey cement and pigment laid over 20mm thick screed bed in CM 1:4 set and jointed and pointed in neat cement slurry in floors complete all as specified and direcetd.

Taking down cement plaster or cement lime plaster on brick on stone walls etc including raking out joint, hacking for key, scrubbing down with water etc complete all as specified and as directed.

Providing plain cement concrete type B-1, 1:2:4 (using 20 mm graded stone agg) as in lintels upto 1.5 M clear span, cills, steps, seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railing upto 60 cm in height, copings, kneelers, apex stones, bed plates, bed blocks, roof kerbs water troughs and the like including weathering slightly rounded or chamfered angles and throating complete all as specified and as directed

M&L for rendering 20 mm thick pre polymer modified ready mixed cement based plaster in two coats 12 mm thick base coat and 8 mm thick finishing/final coat. Polymer modified ready mixed cement based plaster should having minimum composition of cement & sand 1:4 using fully treated dry, well graded natural sand conforming to IS-383 suitable for external plastering having low rebound properties, low water demand for curing properties, mechnical mixing with water in a matalic tray only to made good, consistency as per the specification of the manufacturer and applied over exterior masonry and concrete surfaces incl using richer mix for making corners if necessary incl making grooves of existing size and necessary two legged MS pipe scaffolding as wherever required incl curing required complete all as specified and directed.

Providing and injecting chemical emulsion for post constructional anti-termite treatment along external wall where the apron is not provided using chemical emulsion at the rate of 7.5 ltrs per sqm of the vertical surface of the sub- stsructure to a depth of 300 mm including excavating channel along the wall and rodding etc complete all as specified and directed.

Providing and injecting chemical emulsion for post constructional anti-termite treatment along external wall below concrete or masonry apron using chemical emulsion @ 2.25 ltrs per linear metre including drilling and plugging holes etc in apron complete all as specified and as directed.

Providing and injecting chemical emulsion for post constructional anti-termite treatment of soil under existing floors using emulsion @ one litre per hole 300 mm apart including drilling and plugging 12 mm dia holes with cement mortar 1 : 2 (1 cement : 2 coarse sand) to match the existing floors all as specified and directed.

Providing and injecting chemical emulsion for post constructional anti-termite treatment of voids in masonry using chemical emulsion one litre per hole at 300 mm intervals including drilling holes at 45 degree and replugging them with cement mortar 1:2 (1 cement : 2 coarse sand ) to match the existing floors/surface complete all as specified and as directed..

Providing and injecting chemical emulsion for post constructional anti-termite treatment at points of contact of wood work by chemical emulsion (in oil or kerosene based solution ) @ 0.5 ltr/hole by drilling 6 mm dia holes at a downward angle of 45 degree at 150 mm centre to centre and sealing the same all as specified and directed.

S&F 5mm thick PVC sheet fillet of width 35 mm for wall paneling inclusive of fixing on to wall vertically with screws and C/C deistane 30 CM to make PVC frame as per specification and drawing. (Make Rajshree)

S&F PVC wall /ceiling paneling consisting of 5 mm thick plain colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications and drawing. (Make - Rajshree or equivalent make as spproved by GE).

S&F stainless steel sink with drainage board made out of stainless steel 1mm thick sheet for kitchen with plug, washers and waste pipe incl bedding in cement mortar to dward wall or incl fixing cantilever brackets and connecting union to pipe overall size 915 x 460mm and bowl size 410 x 330 x 160mm complete all as specified and as directed.

S & F Stainless steel wire baskets SS 304 or equivalent with full extension sliding mechanism used as drawer with solft closing fittings so as to slide open and shutt with one smooth movement. Front and side covering with prelaminated BWR marine plywood complete all as specified and as directed.

S & F Stainless steel multipurpose baskets SS 304 or equivalent with full extension sliding mechanism used as drawer with solft closing fittings so as to slide open and shutt with one smooth movement. Front and side covering with prelaminated BWR marine plywood complete all as specified and as directed.

S & F Stainless steel cutlery unit,cup and saucer unit baskets SS 304 or equivalent with full extension sliding mechanism used as drawer with solft closing fittings so as to slide open and shutt with one smooth movement. Front and side covering with prelaminated BWR marine plywood complete all as specified and as directed.

S & F Stainless steel thali basket SS 304 or equivalent with full extension sliding mechanism used as drawer with solft closing fittings so as to slide open and shutt with one smooth movement. Front and side covering with prelaminated BWR marine plywood complete all as specified and as directed.

M & L in repairs 18 mm thick factory made acrylic board suitable for cupboards, drawers etc of any colour complete all as specified and as directed.

All as per item No. 41 above but for 12mm complete all as specified and as directed.

S&F Auto clouse hinges stainless steel for full overlap for cup board shutters etc complete all as specified and as directed.

S&F Stainless Steel cabinet/ door/drawer handle decorative handles suitable size variying from100 to 200 mm complete all as specified and as directed.

S & F in repairs SS Magnetic door catcher for drawer, cupboards etc complete all as specified and as directed.

S&F Stainless steel locks suitable for cupboards, drawers etc complete all as specified and as directed.

S&F in repairs plate rack made of stainless steel, 910 x 1220X0.25 mm including fixing as per manufacturers instruction.(SSKPR-318 of silver shine or equivalent make in list of manufactures)

S&F in repairs fancy type CP Pillar taps 15 mm dia, cast copper alloy , with capstan heads, screwed down high pressure ,with long screwed shanks and fly-nuts , screwed for iron pipe and fixed complete all as specified and as directed.( Note: Cat log No FUS-29001 of Jaquar or equivalent make in list of manufactures)

S&F in repairs fancy type cock suitable for counter top wash basin 15 mm dia, screwed for iron pipe and fixed complete all as specified and as directed.(Make: Cat part No FLR-5357N of Jaquar or equivalent make in list of manufactures).

S&F in repairs fancy type cock suitable for sink 15 mm dia, screwed for iron pipe and fixed complete all as specified and as directed.(Make: Cat part No CON-349KN of Jaquar or equivalent make in list of manufactures).

S&F in repairs fancy type cock suitable for sink with raised J shaped swinging spout (wall mounted model 15 mm dia, screwed for iron pipe and fixed complete all as specified and as directed.(Make: Cat part No CON-357KN of Jaquar or equivalent make in list of manufactures).

S&F in repairs fancy type bib cock 15 mm dia, screwed for iron pipe and fixed complete all as specified and as directed.(Make: Cat part No CON-037KN of Jaquar or equivalent make in list of manufactures).

S&F in repairs fancy type two way bib cock 15 mm dia, screwed for iron pipe and fixed complete all as specified and as directed.(Make: Cat part No CON-041KN of Jaquar or equivalent make in list of manufactures).

S & F in repairs angular stop cock 15 mm dia , screwed for pipe and fixed complete all as specified and as directed.Make:Cat part No CON-053 KN of Jaquar or equivalent make in list of manufactures).

S & F in repairs Stainless steel single towel rail 600mm long complete all as specified and as directed.(Make: Cat part No CAN-1111NM of Jaquar or equivalent make in list of manufactures).

M&L for preparation of newly plastered surfaces of wall, soffits, facia roof and applying two coats of weather proof acrylic based paint (100% acrylic) over one coat of cement based primer with necesssary scaffolding for high rise blds etc all as specified and directed.

M&L for preparation of old wall surfaces of any description & applying one coats of acrylic (antifungal) exterior grade paint on wall/roof including necessary scaffolding complete all as specified and directed

Removing excavated material n.exc 50m and n.exc 250m and depositiing where directed at a level n.exc 1.5m above the starting point complete all as specified and as directed

MADHU ENTERPRIZES

SHREE JAGDISH FURNITURE CO.

SACHINENTERPRISES

Sachin santosh dalvi

A.R. ENTERPRISE