Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹42.9 LAccepted-AOC 6 SAI KRUPA SONAWANE PARK BEHIND TILAK NAGAR BUS STOP OZAR MIG NASHIK 422206 | NASHIK | NASHIK | MAHARASHTRA | 422206 | L1 | Accepted-AOC BEING L1 | |
| 2 | L2₹50.4 L+₹6.3 L (14.4%)Rejected-Finance | L2 | Rejected-Finance BEING NOT L1 |
Tender Value
₹40 L
EMD Value
₹80,000
Closing Date
19 Oct 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE AF OJHAR
GE AF OJHAR
REPAIR TO EXTERNAL PLASTERING, REPAIR OF CHAJJA, FACIA, PLINTH PROTECTION RCC WORK INTERNAL PLASTER AND MISCELLANEOUS WOEK INCLUDING EXTERNAL FINISHES IN DOMESTIC AND TECH AREA AT AF STATION OJHAR
2022_MES_551068_2
8916/E8
Open Tender
Civil Works
Item Rate
240 days
OJHAR
Please refer Tender documents.
8 documents required · 8 mandatory
₹500
GE AF OJHAR
₹80,000
Yes
7 Dec 2022
7 Oct 2022
21 Oct 2022
7 Oct 2022
19 Oct 2022
7 Oct 2022
Amount
Taking down cement plaster on brick or stone wall any description including raking out joints, hacking for key, scrubbing down with water etc.compete all as specified as directed by Engineer -in -charge ,
M&L for 15mm thick rendering on brick/concrete surfaces on broken edges of chajjas, facia, slab, roof projectioon and any other brick/concrete surface in patch work in CM 1:4 and finishing fair and even without using extra cement with using 2% Integral water proofing compound by wt of cement all as specified in SSR (Note: Water proofing compound will be measured and paid separately under relevant item) Note: The rate quoted shall be deemed to include for work up to four storey building & height upto 15.00m including all safety measures, scaffoldings etc., required for carrying out the work and nothing extra on this account shall be admissible.
All as item no 2 above but 20mm thick in two coats
M&L for Washed stone grit plaster on exterior walls in two layers, under layer 12mm cement plaster 1:4 (1 cement: 4 coarse sand ) furrowing the under layer with scratching tool, applying cement slurry on the under layer @ 3 Kg of cement per square metre, top layer 15mm cement plaster 1:1/2:2 (1 cement: 1/2 coarse sand : 2 stone chipping 10mm nominal size) in panels with groove all around as per approved pattern including scrubbing and washing, the top layer with brushes and water to expose the stone chippings .complete all as specified in SSR Part-I (Payment for providing grooves shall be made separately). Note: The rate quoted shall be deemed to include for work up to four storey building & height upto 15.00m including all safety measures, scaffoldings etc., required for carrying out the work and nothing extra on this account shall be admissible.
M&L for Forming groove of uniform size 15mm wide and 15mm deep in the top layer of washed stone grit plaster as per approved pattern using wooden battens, nailed to the under layer including removal of wooden battens, repair to the edges of panels and finishing the groove complete as per specifications and direction of the Engineer-in-charge :
M&L for Rendering 10mm thick in cement mortar 1:6 on fair faces of brick/concrete surfaces and finished surface even and smooth without using extra cement complete all as specified and as directed.
All as per item No 6 above, but 5mm thick in CM 1:3 on ceiling surfaces.
Supply only Integral water proofing compound. (Make: Choksey/STP/Fosroc)
Cutting groove in cracked walls and filled with epoxy grout (Make : Fosroc/CHOKSEY/STP) with a pressure grout equipment to inject through the prefixed nozzles. Make : Fosroc & equivalent
Material and labour for new plastered surface of wall/ceiling and applying two coat of exterior acrylic emulsion (Weather coat) over a coat of exterior acrylic primer of approved colour of ASIAN/Berger/CHOKSEY/STP of equivalent all as specified and as directed.Note: The rate quoted shall be deemed to include for work up to four storey building & height upto 15.00m including all safety measures, scaffoldings etc., required for carrying out the work and nothing extra on this account shall be admissible.
Preparation of newly plasterd surfaces of wall/ceiling by brooming down and applying two coat of cement paint over a coat of primer white or tinted on walls including cornices etc complete all as specified and as directed by Engineer in charge. Note : Curing is essential before & after application of cement base paint. Contractor is make his proper arrangement of work scaretted in all the buildings.
Preparation of newlyplasterd surfaces of walls and applying two coat of distemper oil emulsion over a coat of primer white or tinted on walls including in patches also , cornices by roller machine etc.complete all as as specified and as directed by Engineer in charge
Preparation of newly plasterd surfaces and applying two coat of white wash on walls including cornices etc.complete all as specified and as directed by Engineer in charge
All as per serial item No.13 above but 3 coats on ceilings surfaces complete all as specified and as directed by Engineer in charge.
Material and labour for complete removal of existing treatment on wall/ceiling surfaces including removing nails, making good holes, cracks etc., brooming down or scrapping down smoke shoots by using steel wire brushes and applying one coat of exterior acrylic emulsion (Weather coat) over a coat of exterior acrylic primer of approved colour of ASIAN/Berger/CHOKSEY/STP of equivalent all as specified and as directed.Note: The rate quoted shall be deemed to include for work up to four storey building & height upto 15.00m including all safety measures, scaffoldings etc., required for carrying out the work and nothing extra on this account shall be admissible. Note : The exterior acrylic emulsion shall be applied in different shades with colour pattern as approved for facades of different bldgs for elegant look as per site/ user requirement the rate are deems to be this aspects.
Complete removal of existing treatment & cleaningby including vacuume based sanding machine removing nails etc, and applying Two coats of exterior Acrylic emulsion (Apex)/Equivalent of as white/sappire blue/dark blue or as approved over one coat of exterior water based wall primer and making good the even on surface by filling with wall care putty on walls, ceiling, facias, beams, cornices etc with and including provision of scaffolding required for the treatment to external surfaces of building with required safety measures etc complete all as specified and as directed by Engineer in charge. Note : The work shall be executed stage wise and each stage approved by Engr-in-Charge. Stage 1 : Complete removal of existing treatment. Stage 2 : Priming with exterior water based wall priming Stage 3 : 1st coat of exterior Acrylic emulsion (Apex)/Berger weather coat) of any colour Stage 4 : 2nd coat of exterior Acrylic emulsion ((Apex)/Berger weather coat) of any colour
Complete Removal of existing treatment on old surfaces of wall/ ceiling and make the surface smooth by rubbing/filling the holes with cement based wall care putty and applying two coat of cement base paint white or tinted including cornices etc.complete all as specified and as directed by Engineer in charge. Note : Curing is essential before & after application of cement base paint. Contractor is make his proper arrangement of work scaretted in all the buildings.
Preparation of old surfaces of wall/ceiling by brooming down and applying one coat of cement paint white or tinted on walls including cornices etc complete all as specified and as directed by Engineer in charge. Note : Curing is essential before & after application of cement base paint. Contractor is make his proper arrangement of work scaretted in all the buildings.
Complete removal of existing treatment & cleaningby including vacuume based sanding machine removing nails etc, and applying Two coats of exterior Acrylic emulsion (Apex)/Equivalent of as Camouflage pattern or as pattern approved by Engr-in-Charge over one coat of exterior water based wall primer and making good the even on surface by filling with wall care putty on walls, ceiling, facias, beams, cornices etc with and including provision of scaffolding required for the treatment to external surfaces of building with required safety measures etc complete all as specified and as directed by Engineer in charge. Note : The work shall be executed stage wise and each stage approved by Engr-in-Charge. Stage 1 : Complete removal of existing treatment. Stage 2 : Priming with exterior water based wall priming Stage 3 : 1st coat of exterior Acrylic emulsion (Apex)/Berger weather coat) of any colour Stage 4 : 2nd coat of exterior Acrylic emulsion ((Apex)/Berger weather coat) of any colour
M&L for Repair to RCC structure using micro concrete all as per manufactureres instructions, as descripbed below and as specified and directed. (a) chipping off existing loose and damaged/craked concrete/plaster surfaces at location decided by engr-in-charge to depth n.exc 100mm using peneumatic tools or with light chiseling & wire brush, descale the exposed surfaces of reinforcement with wire brushes removing all loose rust scales from rebar blowing all loose dust with blower and washing concrete surfaces. A coat of alkali rust converting primer to be applied on the reinforcement bar surfaces. (b) Welding additional reinforcement bars where dia of existing bar is found reduced than specified limit as directed. Note : Reinforcement will be measured and paid separately. (c) Applying coat of anticorrosive protective coating on both old & new reinforcement bars surfaces as per manufactureres instructions (d) Applying a coat of epoxy resin concrete bonding agent to exposed concrete surfaces and rebars. (e) Providing polymer modified ement mortar in specified composition for making manufactureres instructions (Thickness varies from 25mm to 100mm) Note : - (i) The rate for necessaryscaffolding & formwork is included in the quoted rate. ii) The work will be carried out upto G+4 floors
S & F mild steel TMT Bars of 5mm dia and over upto and including 10mm in stirrups spacers and binding cut to length bent to shaps required,including cranking bending spirally for hooping for columns hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securibg with clips
Removal of trees of roots of any girth in during cutting of brick or concrete surface completely and making good with filling of cement concrete 1:2:4 type B0 including formwork etc and pouring acid ete for trees not to grow further all as specified and directed by Engineer in charge.
Demolation in cement concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level
M & L for cement concrete type C2 (1:3:6) (40 mm graded broken stone aggregate) 75 mm thick as in plinth protection and finish even and fair including form work complete all as directed by Engr in Charge
M & L for applying 2 mm thick thermo plastic road marking paint with glass beads of white /yellow colour of approved make, shade, for road marking of any width & girth & painting lines, dashes, arrows etc. on bitumen road/pavement & on concrete surfaces using hot processor plant including removing old paint by paint remover or burning off by blow lamps & cleaning with scrapers for removing all dirt/dust & other foreign matters at site & managing traffic control etc complete all as specified & directed of make : Apcotrack of Asian or equivalent in Shalimar/ Berger lewis/Nerolac/ Johnson & Nicholson/Maruthi
Supply and fix in repairs informatry refelective sign board with 2mm thick aluminium sheet of size not less than 0.60 sqm each enclosed by stainless steel frame of section not less than 40x 40 x1.6 mm thick, writing of letters on both side with size of letters not less than 10 cm in height and 2 cm in width and nos of letters exc 6 nos but not exc 25 nos each side with high intensity prismatic reflective tape, including 2 nos of stainless steel post in each board not less than 50 mm dia 1.6 mm thck duly polished for best shine fited round glove at height of 2.1 mm above ground level. each including 6 mm thick stainless steel plate of length exc. 22.5 cm and not exc. 30 cm long and dia of neck 11 to 15 mm for fixing each stainless steel plate, board shall be embedded in PCC 1:2:4 type B1 (20mm graded aggregate) of size in post holes 30x30x45cm including all excavations and removing the excavated material upto 50 mtr distance. (Each frame and vertical post shall be aprovided with 8 Nos of (4 Nos with vertical post ) Stainless steel plate of sixe 100 mm x 100 mm x2 mm including nut and bolt complete all as specified and directed. Note : (i) Grade of stainless steel shall be of 304. (ii) Area as covered by outer edges of stainless steel frame of size 40x40x1.6 mm including aluminimum sheet only shall be measured for payment) Make : SUNEYEZ or equivalent as approved.
S & F in repair cat eye reflector polycarbonate body of both side reflections, size not less than 100 x90 mm thickness as per manufacturer, heavy duty with both side high grade red colour/yellow reflector, fixed with epoxy/fasterners etc as per manufacturers instruction on road surface.complete all as specified by Engineer-in-charge.(Make- 3M/Apcolite/Darkeye or Equivalent)
S&F in repair mild steel work in tubular post as in delenator of 50mm internal bore, medium grade thickness not less than 3mm and minimum of length 1 mtr (0.70mtr above GL and 0.30 mtr below GL) embedded in PCC 1:2:4 type B1 (20mm graded aggregate) of size in post holes 20x20x40cm including all excavations and removing the excavated material upto 50 mtr distance. etc and similar work confirming to Fe 290 grade E 165 complete all as specified and as directed.
M & L two coats of synthetic enamel paint on steel surfaces over one coat of red oxide or zinc chrome primer, of any description over 10cm width or girth including preparation of new or previously untreated surfaces of steel. compete all as specified as directed by Engineer -in -charge
S&F of reflective /Prismatic tape (yellow/Red/White/green) width of reflective tape not exc 50mm each of engineering grade over MS pipe of any dia as delinator complete all as directed and specified, Make : 3M/Avery or equvilant as approved.
S&F in repair of 600mm dia Convex mirrors faces manufactured from shatterproof acrylic and including with heavy duty fitting. The convex mirror, fish eye mirror in which the reflective surface bulges towards the light source and its reflecting light towards. Product code : AL 702, Polycarbonate body materials, wt not less than 2600Gms, complete fixing with clamps and post of any colour and embedded in PCC 1:2:4 type B1 (20mm graded aggregate) of size in post holes 20x20x40cm including all excavations and removing the excavated material upto 50 mtr distance. etc
Labour only for opening of air locks in toilets /baths and kitchen water pipe line but excluding fittings complete all as specified.complete all as specified and as directed by Engineer-In-Charge
Taking up or down GI tubing and connections of 15mm bore including cleaning for refixing Complete all as specified and directed by Engineer-in-charge.
All as per item No.33 above but 20 mm bore.
All as per item No 33 above but 25 mm bore .
Supply and fixing tubes medium grade galvanized with all fittings and fixed complete to walls and ceiling or laid in floor (Bore of pipe 15mm) complete all as specified complete all as specified and as directed by Engineer-In-Charge
All as per item No.36 above but refixing old servicable pipe .
Supply and fixing tubes medium grade galvanized with all fittings and fixed complete to walls and ceiling or laid in floor (Bore of pipe 20 mm) complete all as specified complete all as specified and as directed by Engineer-In-Charge
All as per item No 38 above but refixing old servicable pipe complete all as specified .
Supply and fixing tubes medium grade galvanized with all fittings and fixed complete to walls and ceiling or laid in floor (Bore of pipe 25 mm) complete all as specified Make: JINDAL, TATA,. complete all as specified and as directed by Engineer-In-Charge
All as per item No 40 above but refixing old servicable pipe complete all as specified .
S& F in repair for 20 mm dia CPVC pipe as on wall , floor , ceiling , concealed etc complete and as directed by Engr in charge with all fittings and fixtured , jonting solution of ISI mark including making grove in wall/ceiling and finished with cement mortor 1:4 with plumbing nails for securing pipes etc directed. Make : Finolex/Dutrun/Ashrrvad
S& F in repair for 25 mm dia CPVC pipe as on wall , floor , ceiling , concealed etc complete and as directed by Engr in charge with all fittings and fixtured , jonting solution of ISI mark including making grove in wall/ceiling and finished with cement mortor 1:4 with plumbing nails for securing pipes etc directed Make : Finolex/Dutrun/Ashrrvad
Supply and fixing in repairs 15 mm bore float valve of high pressure PTMT with epoxy coated aluminuim rod and high density plastic ball screwed for iron pipe and fixed in tank which situated up to 16m height buildingincluding necessary ladder for climbing and including replacement of GI Nipples and other fittings if required .complete all as specified and as directed by Engineer-in-Charge.
All as per item No.44 above but 20 mm bore complete all as specified.
All as per item No.44 above but 25 mm bore complete all as specified.
Labour only to adjust the float valves of 15/20/25mm dia of tanks of any capacity up to 8000 ltr capacity and upto 4 storey bldg.
Supply and fix non return valves of 20 mm dia of ISI mark pipe to existing /new GI pipes including removing and refixing the same pipe for required fitting to fix the valve etc complete and as directed by Engr in charge
S&F in repairs 10 litres capacity PVC Valveless symphonic action type flushing cistern high / low level white complete with inlet , ball valve float and handle including brackets and telescopic down pipes and jointing with WC complete complete all as specified and as directed by Engineer-In-Charge
Servicing of Flushing system 10 litres capacity PVC Valveless symphonic action type flushing cistern low level . Taking down the all materials from existing cistern, Cleaned all dirt and refixing the same with making good and leakage free condition for 1 year, including repalcement of folat valve, Syphone, flush washer and flush handle with all fixing arrengments complete all as direceted.
Taking down and refixing the 15mm dia CP Bib Cock/ Piller cock/ Angle cock/Concealed stop cock of any make with replacement of washer complete. The Bib cock/ Piller Cock/ Angle cock shall be fixed with Taplane tape without damageing the exising pipe lines complete. The rate includes dismanteling of tiles and making good if required
S&F in repair brass sprindle for CP Bib Cock/ Piller cock/ Angle cock/Concealed stop cock of various make 15mm dia.
Supply only CP Head for CP Bib Cock/ Piller cock/ Angle cock/Concealed stop cock of various make under 15mm dia.
S&F in repair Bib tap PVC any colour/high pressure, screwed down high pressure as specified for 15mm bore .Complete all as specified and directed by Engineer-in-charge.
S&F in repair Pillar tap PVC any colour/high pressure, screwed down high pressure as specified for 15mm bore.Complete all as specified and directed by Engineer-in-charge.
S&F in repairs wash basin mixer cast copper alloy, chromium plated central hole without popup waste system with 450mm long copper pipe and brass nut including hot & cold water system complete all as directed (Make : Jaquar /Prayag/Plumber or equivalent
Fixing in repair wash basin mixer/ Wall mixer cast copper alloy, chromium plated central hole without popup waste system with 450mm long copper pipe and brass nut complete all as direceted.
S&F in repairs wall mixer cast copper alloy, chromium plated 3 in 1 system with provision for both over head shower chromium plated, with wall flange, screwed down, for iron pipe or for brass ferrule including dismantling of 3 No.concealled stop cock & 2 No. bib cock for each mixer (Make : (Make : Jaquar /Prayag/Plumber or equivalent complete all as specified and as directed by Engineer-In-Charge
S/F in repair Toilet paper holder chromium plated fixed with CP screws of Make Prayag/Parko/saiko
S & F in Repair Pillar taps, cast copper alloy , with capstan heads, chromium plated, screwed down high pressure fancy type of 15 mm bore size with or without lettered Hot or Cold with long screwed shanks and flynuts , screwed for iron pipe and fixed Complete all as specified and as directed by Engineer-In-Charge.
S&F in Repair Cast copper alloy CP angle valve type stop cock suitable for 15mm bore pipe screwed at both ends or high pressure with Capstan head . Including dismanteling and making good the tiles if required of make Prayag/Marc/Seiko,Complete all as specified and as directed by Engineer-In-Charge.
S&F in Repair bib taps of bore size 15mm, cast copper alloy, , chromium plated, fancy type, with crutch or butter fly handle screwed down , screwed for iron pipe or for brass ferrule Including dismanteling and making good the tiles if requiredComplete all as specified and as directed by Engineer-In-Charge.
S&F in Repair bib tap for Washing machine of bore size 15mm, cast copper alloy, chromium plated, fancy type, with crutch or butter fly handle screwed down , screwed for iron pipe or for brass ferrule of Prayag /Saiko/ Parko Complete all as specified and as directed by Engineer-In-Charge.
S & F in Repair brass cromium plated conceled stop cock of bore size 15 mm, in position conceled in walls/ceilings or floors complete duly making grooves filled with cement mortar in 1:4 finished to match with adjacent surfaces Including dismanteling and making good the tiles if requiredcomplete all as specified and as directed by Engineer-In-Charge
Supply and fixing in repairs 100 mm dia CP brass shower rose swivel type with extension CP rod 15mm dia and 300mm long with connecting rod suitable for 15mm bore pipe .Complete all as specified and directed by Engineer-in-charge.
S&F in Repair PVC connection 15mm size with PTMT nuts, of length 600mm Complete all as specified and as directed by Engineer-In-Charge.
S&F in Repair CP connection 15mm size with Brass nuts, of length 600mm Complete all as specified and as directed by Engineer-In-Charge.
S&F in repairs Vitreous China bowl urinal flat back, size of 465 x 355 x 265 mm white (minimum), with grating and union for discharge pipe including fixing plugs , bedding urinal against wall in cement mortar (1:2) etc. including CP Waste fitting and PVC waste pipe.Completed all as specified and directed by Engineer-in-charge.
S & F in Repair viterous china wash hand basin of size 550 x 400 mm, white colour flat back excluding taps, chain and plug and porcelean stopper but including brackets and CP waste fitting . complete all as specified and as directed by Engineer-In-Charge
S & F in repairs vitreous china wash down water closet pedestal pattern (EWC) white excluding flushing cistern & Incl white seat cover closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device and flush pipe.Complete all as specified and directed by Engineer-in-charge.
S&F in repairs vitreous china squatting pan Orissa pattern size 580x440mm white with P or S trap front or back inlet and integral foot rests including connection to trap to flush pipe etc complete including for making good to floor etc Complete all as specified and as directed by Engineer-In-Charge.
S & F in repairs vitreous china wash down water closet Anglo Indian white excluding flushing cistern & Incl white seat cover of same make closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device and flush pipe.Complete all as specified and directed by Engineer-in-charge.
S&F in repairs Plastic seat cover white closed pattern with flat bottom and cover with CP hinges for EWC.
S&F in repairs Plastic seat cover white Anglo Indian pattern with flat bottom and cover with CP hinges for EWC.
S&F in Repair CP waste coupling 32 mm dia for wash basin
All as in item No 75 above but 40 mm dia for Sink for ISI Marked
S & F in Repair 32 mm PVC flexible pipe for waste outlet with threaded socket at one end.complete all as specified and as directed by Engineer-In-Charge
S & F in Repairs 40 mm PVC flexible pipe for waste outlet with threaded socket at one end.complete all as specified and as directed by Engineer-In-Charge
S&F in Repairs Health faucet mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and wall hook including making connections and fixed in position for EWC complete in all respect as specified.
S&F in repair Jet spray nozzle with PVC tube and wall hook /Fixing Nut &jet Flange chromium plated, screwed down, for iron pipe or for brass ferrule (Make :Prayag/Parko/seaiko
S&F in Repair Brass chromium plated tubular towel rail 20mm dia 60cm long with and including flanges complete all as specified and as directed by Engineer-In-Charge
S & F in repairs soap dish stainless steel as approved by GE complete all as specified and as directed by Engineer-In-Charge.
S & F in repais sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long. Complete all as specified and as directed by Engineer-In-Charge..
S & F in repairs Grating of 125 mm dia of stainless steel with or without waste hole Complete all as specified and as directed by Engineer-In-Charge.
Demolition and breaking up drain pipes (Salt glazed ware , AC or RCC or PVC Pipes) of any dia including all fittings any size all as specified & as directed by Engr-in-Charge.
S & F for PVC (SWR) pipes, bore of pipe in 110mm, single socketed, in any length, with rubber ring joints, laid in floors or fixed to walls Complete all as specified and as directed by Engineer-In-Charge.
S&F PVC (SWR) pipe single socketed in any length with rubber ring joints,laid in floors 75mm dia Complete all as specified and as directed by Engineer-In-Charge.
Supply and fixing in repairs Low density polyethylene pipes (LDPE) of pressure rating 6 kg/ cm2 of 40 mm dia bore for wash hand basin Complete all as specified and directed by Engineer-in-charge.
S&F in repairs PVC(SWR) branch pieces, single (Single Y) equal or unequal or with parallel branches 75mm dia Complete all as specified and as directed by Engineer-In-Charge.
S & F in Repair for PVC (SWR) bends, any radius, bore of pipe in 75mm with cement solvent in position .Complete all as specified and as directed by Engineer-In-Charge.
S & F in Repair for PVC (SWR) bends, any radius, bore of pipe in 110mm with cement solvent in position Complete all as specified and as directed by Engineer-In-Charge.
S & F in Repair for PVC (SWR) vent cowl, any radius, bore of pipe in 110mm with cement solvent in position Complete all as specified and as directed by Engineer-In-Charge.
S & F in Repair for PVC (SWR) vent cowl, any radius, bore of pipe in 75mm with cement solvent in position Complete all as specified and as directed by Engineer-In-Charge.
S& F PVC (SWR) pipes 160mm dia single, socketed in any length ,with rubber ring joints fixed to walls with MS clamps.
S&F PVC (SWR) bends 160mm dia
S&F PVC (SWR) shoe 160mm dia
Supply and fixing PVC Cover lid for PVC water storage tank of capacity upto 2000 litres including PVC hinges and PVC .Complete all as specified and directed by Engineer-in-charge.
Dismantling water tanks of exc250 ltr but n exc 500 ltr. of any description from roof slab of building up to four storey and removing to store.complete all as specified and as directed by Engineer-In-Charge
Dismantling water tanks of exc 500 ltr but n exc 1000 ltr. of any description from roof slab of building up to four story and removing to store. complete all as specified and as directed by Engineer-In-Charge
Supply and fixing 500 Litre capacity Rotational moulded polyethylene water storage tank (cylindrical vertical with closed top) three layers hoisted and fixed in position complete and all as specified and as directed by Engineer-in-Charge
Supply and fixing 1000 Litre capacity Rotational moulded polyethylene water storage tank (cylindrical vertical with closed top) three layers hoisted and fixed in position complete and all as specified and as directed by Engineer-in-Charge.
S&F in Repair Stainless Steel Plate Rack of size 31'' x 30'' x 10'' with using stainless steel sheet of 0.63mm thickness Fixed with Rawl plug and screw. complete all as specified and as directed by Engineer-In-Charge.
S&F in Repair Stainless Steel Plate Rack of size 24'' x 24'' x 10'' with using stainless steel sheet of 0.63mm thickness Fixed with Rawl plug and screw. complete all as specified and as directed by Engineer-In-Charge.
S&F in Repair stainless steel sinks with drainage board made of 1mm thick stainless steel sheet for kitchen or laboratory with plugs washers and waste pipe including fixing cantilever brackets and connecting union to pipe overall size not less than 915mm x 460mm and bowl size 410mm x 330mm x160mm.complete all as specified and as directed by Engineer-In-Charge.
S&F in repair Stainless steel sink, 1.00mm thick for kitchen or laboratory, with plug, waste pipe, washers, including cantilever cast iron brackets, connecting union etc., overall size 495mm x 420mm with bowl size 410mm x 330mm x 160mm complete.
S & F in repair Cast iron floor trap with CP grating weight of grating not less than 35 grams joints to waste pipe in run lead joint dia of outlet 75 mm of floor, trap with deep water seal and of heavy weight coated with tar/black bitumen paint including making good with existing surface by provision of tiles and refilling of the dismantel mnaterials complete all as specified and directed by Engineer-in-charge.
M/L for easing of door shutters for easy closing /opening tightning of hinges or changing the position of hinges adjustment of tower bolts , sliding door bolts with new screw etc complete all as specified and directed by Engr In charge (rate includes replacement of hinges if required)
M/L for easing of window shutters of any type , kitchen cupboards shutters , show case shutter , drawers including fixing of screws for easy closing /opening tightning of piano hinges or changing the position of hinges adjustment of adjusting of handles, knobs with new screw etc including other small adjustments including repair/ replacement of CP/MS powder coated sliding channels of standrad section by complete all as specified and directed by Engr In charge
S & F in repairs floor door stoppers double legged of aluminium alloy body & tounge aluminium anodised alloy with rubber fixed with steel screws on the door frame of size 150 mm long compete all as specified as directed by Engineer -in -charge
S/F in repairs aluminium anodized hasp & staple saftey type with mild steel pin hinge including bolt to hinge plate fixed with screws of 100 mm size compete all as specified as directed by Engineer -in -charge
S & F in repairs 300 mm long and 12 mm dia CP MS door bolt with hasp and staple (Bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolt of extruded section or cast aluminimum alloy.compete all as specified as directed by Engineer -in -charge
S/F in repairs door closer hydraulically regulated designation No.2 universal type of aluminium extruded section body fixed to doors frameswt 60 to 80 Kg with screws or by welding on steel door frame complete all as specified and directed by Engr -in charge
Supply and fixing in repairs helical door spring 250mm size with roller and roller plates of mild steel incl welding to angle iron plate or fixing with wooden/steel chowkhats as required and as specified including necessary welding where ever required. Make: Heera, Universal.Complete all as specified and directed by Engineer-in-charge.
labour only for repairing of steel window /ventilator , making good to jamb/corroded portions and hinges , oiling to hinges / replacement of broken friction hinges by box type hinges including all welding , any fabricator work , bending etc and make functionable including any small fittings required etc complete all as specified.complete all as specified and as directed by Engineer-In-Charge
Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads
Supply and fixing 4 mm thick sheet glass ordinary quality and size in any type of frames and glazing with oil putty (or beading) in square exc. 0.5 Sqm each incl hacking out old broken glass from wooden/steel frames .Complete all as specified and directed by Engineer-in-charge.
S&F of loosed window glasses with oil putty complete with making good complete, window not exceeding 1.50 Sqm
Supply and fixing 3 mm thick figured glass ordinary quality and size in any type of frames and glazing with oil putt (or beading) in square exc. 0.5 Sqm each incl hacking out old broken glass from wooden/steel frames .Complete all as specified and directed by Engineer-in-charge.
S & F for 3 mm thick sheet glass, ordinary quality and glazing with oil putty in square n. exc. 0.5 Sqm in each pane for steel/ aluminium windows compete all as specified as directed by Engineer -in -charge
Supply and fixing in repairs GI wire cloth power woven 0.56 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with tinned tacks or galvanized wire staples for steel window and ventilator including providing MS beads and SS screws . Complete all as specified and directed by Engineer-in-charge.
S & F in repairs GI wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with tinned tracks or wooden beeding patti.to gauge door shutters and wooden windows compete all as specified as directed by Engineer -in -charge
Supply and fixing in repairs Aluminium wire cloth power woven 0.45 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with tinned tacks or galvanized wire staples for Aluminium window and ventilator . Complete all as specified and directed by Engineer-in-charge.
M&L for welding in repairs exc. 2.5cm but n exc. 5cm in length, thickness of metal to welded exc 6mm but n exc 9mm for steel windows , ventilators door frames , door hinges , door springs etc compete all as specified as directed by Engineer -in -charge
S & F in repairs curtain rod of CP MS 25 mm dia not less than 1.6mm thickness with chromium plated projected bracket both side as per sample fixed in position by drilling holes in walls and fixed the brackers with rawl plug and steel screw compete all as specified as directed by Engineer -in -charge
Dismantling of Boarding any description including shutters of existing cup boards.
S & F for 18 mm thick block board laminated on one side of commercial quality exterior Grade -I fixed with screws as in cup board shutters/shelves and pelmets box etc including lipping/beading all over shutter complete all specified and directed by Engr in charge
S & F 40mm width of flaps Continuous (piano) hinges, mild steel, bright finish or electrogalvanised
M/L for fancy type CB knobs of kitchen /drawer shutter as approved by Engr in charge etc complete
M/L for magnetic door lock for door shutters of CB and kitchen shutters of SS ISI mark
S/F in repairs Stainless Steel work as Gde 304 SS in railing/swimming pool ladder/grab bar including all fitting and fixing all as specified and directed by Engr in Charge.
S&F Rubber based door bottom strip with aluminium angle not less than 25x25mm including fixing arrangement with screws properly & all as per manufacturers instruction complete all as specified and directed.
Demolition of stone slab and tiles of any description or thickness in floors, wall all as directed.Complete all as specified and as directed by Engineer-In-Charge
M&L Machine cut cudappah stone slab 20mm to 25mm thick over and including cement screed bed in CM 1;6 laid and jointed in grey cement slurry mixed with pigment to match the shade of slab including rubbing and polishing Complete all as specified and as directed by Engineer-In-Charge.
M&L for drilling holes for pipes etc in cadappa/granite including RCC slab nexc 25mm dia and nexc 100mm depth
Dismantling floor hearth or wall tiling including cement mortar bedding and rubbish off the premises
M&L for repairs to sunken floor slab with the following specifications:- (a) Demolition of PCC and taking out old brick bat fillihng and roughening surfaces of old concrete floor and wall by picking, sweeping clean and washing down with water to remove dust etc. (b) PCC 1:2:4,type B-0, using 12.5mm graded stone aggregate averaging 50mm thick as in sunken floor,with proper slope towards GI spout. The dia of GI Spuot pipe shall be 50mm Medium grade. The minimum length of Spout shall be 500mm and if any spout comes above chajja than the length of the spout shall be more than Chajja projection. Ends of Spout shall be tippered and any cutting through brick/ RCC structure shall be done by the Contractor rates are deemed to be included of this aspects. (c) providing 15mm thick cement plaster in cement mortar 1:3 mixed with water proofing compound @ 3% by weight of cement over bottom and vertical surfaces finishing the surface even and smooth with using extra cement . (d) Damp proof course on horizontal / Vertical surfaces with preparation & applying one coat of primer (33% dilution) and two coats of undiluted material @ 10.67 lts per 10 sqm of Make : smart care Damp proof of M/s asian paint or equivelent for water proofing compound. (e) Graded Brick bats filling under sunken floor of required thickness as per site, (f) PCC 1:3:6,type C-1,using 20mm graded stone aggregate 75mm thick, over brick bats filling as in subbase. Note:- (i) For payment purpose only plan floor area shall be measured. (ii) After Coating of Water proofing compound ponding test shall be carried out by filling the sunken surface with water for 72 Hrs and get approved by Engr-in-Charge if any leakage/ seepage noticed the Contractor will re do the whole process without any extra payment.
All as item No. 138 but area not exc 0.36 Sqm as in Kitchen for trap portion. The trap shall be paid extra in below items.
M & L for coloured Non skid ceramic tiles 7 to 8 mm thick of colour patteren as approved and as per manufacturers catalouge (square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 Sqm, in floor etc over 15mm thick screed bed with cement mortar 1:6 and set and jointed in neat cement slurry and pointed in white or coloured cement to match including jambs by making the mitred angles at corners all as specified and directed by Engr in charge
M & L for coloured Non skid ceramic tiles 7 to 8 mm thick of colour patteren as approved and as per manufacturers catalouge (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 Sqm, in floor etc over 15mm thick screed bed with cement mortar 1:6 and set and jointed in neat cement slurry and pointed in white or coloured cement to match including jambs by making the mitred angles at corners all as specified and directed by Engr in charge
M & L for coloured glazed ceramic tiles 300 mm x450 mm & 7 - 8 mm thick on vertical surfaces of colour patteren as approved and as per manufacturers catalouge such as skirting, dados etc, set and jointed in neat cement slurry over and including 10 mm thick bedding layer/ backing coat in CM 1:4 complete and pointed in white or coloured cement to match complete all as specified and as directed by Engineer-In-Charge. Note : Skirting shall be provided to match with colour and size of floor tiles provided in rooms.
All as per item No 141 above but in Vertical surfaces such as dado/skirting including 10 mm thick rendering of cement mortar 1:4
Taking down chowkats or frames with shutters (without taking off shutters from the frames) not exc. 1.5 Sqm each compete all as specified as directed by Engineer -in -charge
S&F for Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing as per SSR Part-I
S & F Factory made solid panel PVC door shutter 30 mm thick (Style) consisting of frame made out of MS tubes for top and bottom rails. MS frame shall be covered with heat moulded plain colour PVC channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail and bottom rail on either side & as gap insert for top rail and bottom rail: paneling of plain colour PVC sheet t be fitted in the MS frame welded / sealed to the stiles & rails with suitable PVC sheet beading , and joined together with solvent cement, supplying and fixing in the frame at site as per specification and drawing
S & F 100 mm MS butt hinges medium weight cold rolled mild steel compete all as specified as directed by Engineer -in -charge
S & F 150 mm aluminium anodised barrel tower bolts of extruded section, ISI marked compete all as specified as directed by Engineer -in -charge
S & F 150 mm extruded aluminium alloy handles , fabricated type, anodised, ISI marked compete all as specified as directed by Engineer -in -charge
M/L for filling floor /glazed tile joint with white cement tile grout with pigments matching with tiles including cleaning the tile surface properly
M&L for removing the loosen grill/ baluster/ railing and refxng the same with grouting to wall/ floor/ roof with PCC 1:2:4 (12.5mm greaged aggregate) and making good with finishes complete all as directed.
Taking down the existing PVC sheet of shaft of rear toilet and prevent the leakage from PVC pipe upto 110mm dia and refixing the same with adhevie( New PVC materials are paid separately) make the leakage free upto height 16.00 mtr and refing the PVC sheet and making good all as directed at site.
Supply only for Fibre glass reinforced translucent corrugated /plain sheeting with both side lap fixed with coach screw and washer in roof, wall /cladding /shaft etc.
Taking down the loosen EWC/WHB/Sink of any description and refixing the same with angle iton support to wall for WHB and sink, for EWC screwing to floor and side joints filled with white cement for strengthening and making good complete all as directed.
Removing of building materials & dabries of any types the rate included in the lead i.e loading ,unloading and stacking/sprading etc outside of MD land with own arrangement by Contractor.
M&L to prevent leakage/seepage from roof shall be cleaned by removing dirt dust etc, all cracks to be treated with suitable crack filling compound and applying two coats of flexiable acrylic modified cementous water proofing syatem @ 2kg/Sqm at 1mm thickness Make : Tech force 2K strong of M/s Choksey or URP admixed with cement in 1:1 propotion without waterin 1 coats of make Dr Fixit or equivelant. The Shall be tested with ponding test by Engr-in-Charge. If any failure occoured that shall be redone without any extra cost with in 24 Hrs.
M&L to prevent leakage/seepage from Nahani trap/ floor trap . Including existing trap shall be cleaned by removing dirt dust etc, all cracks to be treated with suitable crack filling compound and applying two coats of acrylic modified cementitious water proofing system @ 2kg/Sqm at 1mm thickness the floor/wall damage area not exceeding 0.5 sqm Make : Tech force 2K strong of M/s Choksey or URP admixed with cement in 1:1 propotion without water in 1 coats of make Dr Fixit or equivelant. This Shall be tested with ponding test by Engr-in-Charge. If any failure occoured that shall be redone without any extra cost with in 24 Hrs.
M&L for dismanteling the wall/floor tiles and searching the GI tubing leakage point and replace the GI tubing connections and make the position leakage free with in 48 hrs after satisfication refill the dismanteled area with matching tiles with cement mortar and making good complete all as directed.
Taking down of existing wall hanging cup board not exc 1.50 sqm size and refixing with 150mm long stainless steel with rawl plug and support at bottom angle iron with nailing and making good complete all as directed
Taking down of existing kitchen cup board not exc 1.50 sqm size and refixing with 100mm long stainless steel with rawl plug making good complete all as directed
Taking down of PVC door of toilet and bathroom, forming jambs in CM 1:6 with chicken wiremesh for strengthening the support wall including finishes with 2 coats of distemper and refixing the PVC door with frame with approved holdfast and making good complete all as directed
Note: 1.The contractor shall deploy skilled tradesman i.e. 01x carpenter, 01 x plumber with his helper and required T&P , complaints slips daily in the morning from AGE B/R office by shall be collected, the contractor/supervisor and same shall be resubmitted at evening within completion of alloted job duly signed by user . The complaint book shall be made by the Contractor as sample given by Deptt. No extra shall be paid on this account & rates are deemed to be included. 2. As per complaints , The mason and welder with his helper and required T&P , collect the complaints slips from AGE B/R office by the contractor/supervisor and same shall be resubmitted at evening within completion of alloted job. No extra shall be paid on this account & rates are deemed to be included . 3.In case of failure to attend the complaint within 48 hrs the contractor shall be double recovery quoeted by the contractor with each connecting item not attending complaint. 4. Due to comprehensive maintance work, The work shall be executed in various bldgs of Domestice area with small patch work/Small number complaints upto completion of Contract. This is applied to all items mentioned above. No extra shall be paid on this account & rates are deemed to be included
SHREE SAMARTH SERVICES
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .