Maintenance of Circle Office building at 400kv substation BBMB Panipat

Amount

Dismantling concrete (d) Cement concrete plain1:2:4 mix

Dismantling brick work tile, masonry or tilelining(b) In cement

115 mm thick brick wall with every fourth courser in forced with hoop iron laid in 1:4cement mortar in superstructure

Earth work in excavation in foundations trenches etc. in all kinds of soil where Pick-Jumper work is not involved and not exceeding 2.0metres depth including dressing of bottom and sides of trenches, stacking the excavated soil clear from the edge of excavation and subsequent filling around masonry in 15 cm, layers with compaction including disposal of all surplus soil as directed within lead of 30 metres.

Cement concrete 1:2:4(a) Cement concrete 1:2:4 (ii) mixing by mechanical means using concrete mixer volumetric type

Centering and shuttering for flat surfaces such as suspended floors, roofs, landings, chajjas, shelves etc

Cold twisted deformed (Ribbed/ Tor steel) Bars(Fe 415 grade as per IS 1786-2008) , for R.C.C works, where not including in the complete rate of RCC including binding & bending and placing in position complete

Reinforced cement concrete M-20mechanically batch mixed using batch type concrete mixer as perIS:1791 and vibrated by needle vibrator but excluding steel reinforcement centring and shuttering in super structure.

(A) Stone (building or pitching) Sand, Earth, Fly Ash, Bajri, Shingle, Spalls, Brick bats, Brickballast and Stone metal.

Earth,Surkhi, Sand, Earth, Fly Ash, Bajri, Ballast, Stone boulders, Kankar and building rubbish, Earth.

Dismantling of floor tiles at any floor of the building, laid in cement mortar including Dismantling of cement concrete base and disposal of malba at a suitable place within a distance of 100 Mtrs of the complex complete in all respect.

Dismantling of wall tiles at any floor of the building, laid in cement mortar including scraping of cement plaster and disposal of malba at a suitable place within a distance of 100 Mtrs of the complex complete in all respect

Scrapping c) Cement Plaster

Cement rendering on plaster 1mm thick

12.5 mm thick cement plaster 1:4

Providing and laying vitrified floor tiles in different sizes in light colour shades made using Full Body Technology (thickness to be specified by the manufacturer) with water absorption’s less than 0.08% and conforming to IS : 15622 of approved make in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement: 4 fines and), complete. ( Full body vitrified tiles have pigment in entire body / thickness of tile which makes chips and scratches less noticeable and make na ideal choice for high traffic zones.) a) Size 600x600 mm

Providing and fixing 1st quality ceramic glazed wall tiles Matt/Semi Matt/Glosy/Highly Gloss finish/Highlighter/emboss conforming to IS :15622 (thickness to be specified by the manufacture of approved make in all colours, shades except burgundy, bottle green, black of size 600 x 300 mm as approved by Engineer-in-Charge in skirting, risers of steps and dados over12 mm thick bed of cement Mortar 1:4 (1 cement:4 fine sand) and jointing with grey cement slurry@ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete.

Removing Doors and Windows (Steel or wood)with chowkhats by making recesses in walls when the wall is not to be dismantled.

Doors of area 3 sqm and below.

Windows of area 3 sqm and below

Providing & fixing factory made Solid PVC Chowkhat Door frame of the size 50mm x 47mmwith a wall thickness of 5mm made out of extruded 5mm PVC foam sheet, mitre cut at 2corners & joined with 2Nos of 150mm long brackets of 15 x 15mm M.S square tube. the two vertical doors profiles are to be reinforced with19 x 19mm M.S square tube of 19 guage, the door framed shall be fixed to the wall using65/100mm long M.S screws through the frame by using fasteners. a minimum of 4 nos. of screws to be provided for each vertical member& minimum 2nos for horizontal member etc. as per manufacturer's specification, conforming to test criteria specified in IS:4020-1998, Drawings and to the entire satisfaction of engineer-in charge.

Providing & fixing 30mm thick Factory Made solid Panel PVC Door shutter (Pannelthickness5mm) Consisting of frame made out of M.Stubes of 19 guage thickness and size of 19mm x19mm for styles & 15mm x15mm for top &bottom rails. M.S frame shall have a coat of steel primers of approved make & manufacture. M.S frame shall be covered with 5mm thick heat moulded PVC 'C' Channel of size 30 x 50mm forming styles, and 5mm thick, 75mm wide PVC sheets for top rail, lock rail & bottom rail on either side, and 10mm (5mm x 2) thick, 20mm wide cross PVC sheet as gap insert for top rail &bottom rail. Panelling of 5mm thick PVC sheet to be fitted in the M.S Frame welded/Sealed tothe styles & Rails with 30mm wide x 5mm thick PVC sheet beading on either side and joined together with solvent cement adhesive. an additional 5mm thick PVC strips of 20mm widthis to be stuck on the interior side of the 'C' Channel using PVC solvent cement adhesive etc. complete as per manufacturer's specification, conforming to test criteria specified in IS:4020-1998,Drawings and to the entire satisfaction of engineer-in-charge

Chowkats of commercial hard wood such as Hollock confirming to ISI specification no 1003 m kiln seasoned of doors and windows including iron hold fasts, corner straps cleats, stops, bolts for hold fasts etc, complete fixed in position (Section 60mm x 150mm)(A) Double Rebate (60mm x 150mm) (60mmx 150mm)

Double Rebate (60mm x 150mm)

Chowkats of commercial hard wood such as Hollock confirming to ISI specification no 1003 mkiln seasoned of doors and windows includingiron hold fasts, corner straps cleats,stops, boltsfor hold fasts etc, complete fixed in position(Section 60mm x 150mm)(B)Single Rebate (60mm x 100mm)

Factory manufactured flush door fixed in position iron hinges, etc (excluding the cost of any fittings other than specified above but including labour for fixing the same in position (Code : II Revision IS-2191 Part-I) 1973(iv) 35 mm thick

Wire gauge Hollock wood door shutter without springs housed in chowkhat. (a)35mm thick

Hollock wood doors shutter windows shutter including hinges, screws, chocks, cheats, stops cords etc. complete fixed in position (a) Panelled, glazed or glazed and panelled(Double leaf)(ii) 35mm thick

Cost of aluminum fittings complete for doors, windows such as tower bolts, handles,Stoppers and screw etc. for these fittings (Excluding sliding bolt) (i)For shutter area up to 0.50 sqm

Applying pink primer or aluminium priming coat on wood work including preparation of surface knotting and stopping etc.(a) With special quality paint

Painting two coats excluding priming coat with synthetic enamel paint in all shades on wood work, metallic or plastered, concrete surface to give an even shade. (a) With special quality paint

Cutting chase in brick walls in cement or in floor for embedding G.I. or C.I pipes lines and making good the same to its original condition. (a) Size 75 mm x 75 mm

Dismantling, disjointing, removal of G.I. pipe lines, specials, valves and fittings including ride back as desired by Engineer-in-Charge.

15mm internal diameter pipe line

20mm internal diameter pipe line

Providing and laying, jointing fixing and testing ISI Marked G.I. Pipe (as per IS 1239) lines B-Class premium make such as ( Jindal Hissar including cost of specials (such as tees, bends, sockets, elbows etc.) painting with anticorrosive bitumen paint testing, cutting, threading Inside building complete

Providing & fixing in position on tarrace ( at all floor levels) HDPE water storage tanks of approved make ( to be approval of Engineer-in-Charge ) with cover with suitable locking arrangement and making necessary holes for inlet out let over flow pipe but without fitting and base support for tank. (i)Tripple layer tank.

Providing and fixing in position automatic brass ball cock in tanks. (b) Brass ball cock with road and plastic ball (ii) 20mmdia

20mm thick cement plaster 1:4 in two coat work

Providing & Fixing in position stop cock /Angle valve (as approved by the Engineer-incharge).(d) C.P.brass 20mm stop cock

Providing and fixing in position Chinaware European type water closet P trap or S trap of approved make (to the approval of the Engineer-in-charge) consisting of 10 ltr. PVC flushing cistern ISI marked, PVC short bend 32 mm dia including cost of seat cover Complete in all respect and to the entire satisfaction of Engineer-in-charge.

Providing & fixing in position best Indian make (to be approval of the Engineer-in charge)vitreous Chinware white flat back or angular lipped front urinal size 460 x 350 x 260 mm C.P. brass flexible tube connection300mm long.

Providing and fixing in position stainless steel sinks of approved make (to the Approval of Engineer-in-charge) 1mm thick, grade-304 (18/8) with waste coupling complete in all respect. (b) Rectangular Sink with Deluxe Border Single Bowl Overall Size 555 mm x 475mm x 200 mm

Providing and fixing in position vitreous chinaware white lavatory suites of approved make (to the approval of Engineer-in-charge)including Rack Bolt Screw Pair 115mm long Without CP fittings complete in all respect. v) Size 560mm x 430mm x 820 mm

Providing and fixing vitreous chinaware pedestal of approved make (to the approval of Engineer-in-charge) for wash hand basin Complete in all respect. ii) Vitreous chinaware standard white half pedestal for wash hand basin.

A) Providing and fixing partition for different Type of urinals. iii) Toughned Glass Partition 8mm thickness size 450 x 900 mm C/S

Providing and fixing jet spray with 2'-6" long PVC pipe. a) With C.P. Brass nut

A) Providing & Fixing in position 15 mm i/d bibcock of approved make (to the approval of Engineer-in-charge) complete in all respect. (i) C.P. brass Bib cock long nose/ long body foam flow without flange

Providing and fixing in position 15mm C.P. Pillar cock foam flow of approved make (to the approval of Engineer-in-charge)

Providing and fixing C.P. brass Urinal Spreader Ocular-Regular complete with fittings for urinals complete.

Providing and fixing P.V.C Waste Pipe Collapsiable 32mm complete in all respect.

Providing & Fixing in position stop cock /Angle valve of approved make (to the approval of Engineer-in-charge ) complete in All respect.(a) C.P. brass 15mm stop cock Male and female end

Providing and fixing in position SS Grating with Frame of approved make (to the approval of (Engineer in charge) complete in all respects.

Providing & fixing in position PVC flexible tube connection of approved make (to the approval of Engineer-in-charge ) complete in All respect. (a) PVC tube connection of size 15mm x 300 mm with C.P. Brass nut

Providing and fixing in position C.P. brass soap dish of approved make (to the approval of Engineer-in-charge ) fixed into Wall with rawl plugs and C.P brass screws complete in all respect.

Providing and fixing in position SWR UPVC special for soil waste vent or anti syphonage pipes as per as per IS - 14735 including cutting and wastage etc. cutting holes in walls roofs or floors etc. and making good to its original condition but excluding cost of lead Joining. B) For 110mm o/d pipes iv) Door Elbow 90 Degree (All side socketed)

Providing & Fixing in position 5mm thick bevelled edge mirror of superior glass (of approved make) complete with 4mm thick hard board backing fixed in with rawl plugs 50mm, C.P. brass screws and washers and S/S Studs on top complete in all respect (as required by the Engineer-in- Charge) (a) Size 600mmx450mm

Providing and fixing in position SWR UPVC special for soil waste vent or anti syphonage pipes as per as per IS - 14735 including cutting and wastage etc. cutting holes in walls roofs or floors etc. and making good to its original condition but excluding cost of lead Joining. B) For 110mm o/d pipes ix) P Trap/Floor Trap 110mm x 110mm

Providing and fixing in position SWR UPVC special for soil waste vent or anti syphonage pipes as per as per IS - 14735 including cutting and wastage etc. cutting holes in walls roofs or floors etc. and making good to its original condition but excluding cost of lead Joining. B) For 110mm o/d pipes x ) P Trap/Floor Trap 110mm x 75mm

Providing, Laying, fixing & jointing of P.V.C. Pipes as per ISI-4985 (ISI marked with the prior approval of Engineer-in-Charge) along the Trenches and laying the same in Trenches to correct alignment and gradients, Cutting, jointing and testing complete as per specifications. iv) 110mm o/d pipe of 10 Kgf. / sqcm

Providing, Laying , fixing & jointing of P.V.C. Pipes as per ISI-4985 (ISI marked with the prior approval of Engineer-in-Charge) along the Trenches and laying the same in Trenches to correct alignment and gradients, Cutting, jointing and testing complete as per specifications. iii) 90mm o/d pipe of 10 Kgf. / sqcm

A) Providing & Fixing in position C.P. Brass flange Dome of approved make (to the approval of Engineer-in-charge) under Various fixtures complete in all respect.

Providing & Fixing in position C.P. Brass Hexa Nipple 15mm of approved make (to the approval of Engineer-in-charge ) complete in All respect.

Dismantling Sanitary fixtures such as Eurpoean /Indian/Orissa W.C., PVC / Chinaware cistern, Wash Hand Basin, Urinal Pot, Sinks and CP Fittings and disposal of dismantled material within a distance of 100Mtr. complete in all respect as required by Engineer-in-Charge.

(a) Eurpoean/Indian/Orissa W.C.,

(b) PVC / China Ware Cistern

(c ) Wash Hand Basin / Urinal Pot

(d) Stainless Steel Sink /Mosaic Sink

(e) CP Bib Cock/Angle Cock/Stop Cock/Shower/Bottle Trap

(f) Wall mixer / Sink Mixer / Basin Mixer /Concealed Stop Cock

(g) Bathroom Accessories such as Soap Dish, Towel Rail, Towel Ring, Towel Bracket, Mirror, Toilet Paper Holder, Seat Cover, Jet Pressure and all other Accessories.

Providing and fixing in position G.I. Tank Nipple of approved make (to the approval of Engineer-in-charge) in PVC Water storage tanks complete in all respect.(b) G.I. tank nipple 20mm i/d

Coloured Granite stone tiles 15mm to 20mm thick in skirting, risers of steps, dado walls and pillars laid in 12.5mm thick cement mortar 1:3 (1 cement 3 coarse sand) and jointed with neat cement slurry mixed with pigment to match the shade of stone, including rubbing and polishing Including labour for fixing dowel pins and cramps.

Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/appropriate z sections and other sections conforming to Is: 733 and IS : 1285 of Jindal, Hindalco, Mahavir or equivalent make approved by Engineer in Charge , fixed with rawl plugs and screws or with fixing clips, or with expansion hold fasteners including necessary filling up of gaps at junctions, at top, bottom and sides with required PVC Plug/ neoprene felt etc. aluminium sections shall be smooth, rust free, straight, mitered and jointed echanically wherever required including cleat angle, aluminium snap beading for glazing/ paneling, C.P. brass /stainless steel screws, all complete as per architectural drawings and the directions of Engineer-In- Charge. (Glazing and paneling to be paid for separately) :

Wt. of Chowkhat size

For Shutter of window Glazed type Wt. Shutter Size

Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with PVC Plug/ neoprene gasket etc. complete as per the Architectural drawings and the directions of engineer-in-charge. (Cost of aluminium snap beading shall be paid in basic item) i) Float glass panes of 5 mm thickness

Providing and fixing aluminium grill 6.3 mm including cost of necessary fittings i.e. screws With Clip Rubber etc. Complete

Providing & fixing 6" stainless steel handles ISI marked on door & window frames complete in all respect as per the Directions of Engineer-in-charge.

Providing & fixing 6" stainless steel tower bolts ISI marked on door & window frames Complete in all respect as per the directions of Engineer-in-charge.

Removing & Refixing of Door

aashirwad engineering

BALA JI ENTERPRISES