Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹84.8 LAccepted-AOC | L1 | Accepted-AOC L1 | |
| 2 | L2₹92.3 L+₹7.5 L (8.81%)Rejected-AOC | L2 | Rejected-AOC L2 |
Tender Value
₹79.9 L
EMD Value
₹79,871
Closing Date
23 Jan 2024, 3:00 pmClosed
Commissioner Madurai Corporation
Aringar Anna Maligai
Providing Head room, Flooring , Parapet wall and electrical works at MLCP Near Meenakshi amman kovil at Ward 52
2024_MAWS_407484_1
E7 / Est.014144 / 23-24
Open Tender
Civil Works
Lump-sum
60 days
Madurai
Please refer Tender documents.
2 documents required · 2 mandatory
₹0
₹79,871
20 Feb 2024
8 Jan 2024
23 Jan 2024
8 Jan 2024
23 Jan 2024
8 Jan 2024
Amount
CIVIL WORKS Centering for soffits of RCC slabs of plane surface like lintels, beams ,etc.,including strutting 3m high using mild steel sheets of size 90cm X 60cm X and B.G 10 stiffened with M.S angles of size 25mm X 25mm X 3mm laid over silver Oak (C.W) joists of size 10cm X 6.5cm (spaced at about 90cm c/c )and supported dy casurina props of 10cm to 13cm dia (spaced of 75cm C/C) complying with standard specification and directed - 10 m 2 (P & D)Data 38 (Plinth beam)
Providing and laying in position Standardized Concrete Mix M-30 Grade in accordance with IS 456-2000 using 20mm and downgraded hard broken granite stone jelly for all RCC of works with minimum cement concrete 0f 400 kg/m3 and maximum water cement ratio of 0.55 including admixture ( Plaster / super plasticizer ) in recommended proportions as per IS : 9103 to accelerate, retard setting of concrete improve workability without imagining strength and durability with about (5.0cu.m) 7730 kg of 20mm machine crushed stone jelly and with about (3.3 cum) 5156 kg of 10-12mm machine crushed stone jelly and with about (4.79 cum) 7670 kg of sand, but excluding cost of reinforcement grill and fabricating charges centering and shuttering and also including laying vibrating with mechanical vibrators finishing curing etc. and providing fixtures like fan clamps in the RCC floor / roof slabs wherever necessary without claiming extra, etc,. Complete complying with standard specification and as directed by the departmental officers the coarse and fine aggregates to be used should comply with the requirements of IS Standards. (No separate payment will be made by the Department for the excess usage of materials).FF
Suppling and fabricating and placing in position MS (or) R.T.S. bar for reinforcement to all RCC works as per the design given including cost of steel and binding wire also in all floors.
Brick work in cement mortar 1:5(one cement,Five sand)using II classmoulded bricks of size 9"*4 3/8* 2 3/4 including finishing, curing etc., complete complying with standard specification.FF
Plain cement concrete 1:4:8 (One cement,four sand and Eight aggregate)using 40mm size HBG metal including cost and conveyance of all materials,all labour charges etc., complete.
Supplying and fixing MS Angle for Hand Rails Barricading,vertical ACP portion,poly carbonate portion etc.,complete.
Plastering in cement martor 1: 3 (one cement and three sand)10 mm thick in all floors including cost and conveyance of all materials and all labour charges etc., complete.
Plastering in cement martor 1:5 (one cement and Five sand)12mm thick in all floors including costand conveyance of all materials and all other charges etc., complete.
Providing two legged using suitable size of casurino posts of 1.50m overall 3m hight difference between two rows being2m and the spacing of posts with 0.50m overlab on either side and braces at 2m etc.,including longitudinal and tr…………. Middle of 40 mm thick and 1m width etc., using coil rope and nails etc.,
Supplying and fixing of Ornamental KUJA for RCC using 12mm chips and required reinforcement. The rate including cost of KUJA and all labour charges etc.,
Providing parapet top LOTOUS BUD SHAP ELEVATIONAL WORK
Providing Elevational Ornamental BORDERS with Double layers of step type edges with curve shapes.The rate labour and all materials etc.,
Manufacturing,supplying and fixing of pull and push type ROLLING SHUTTER with approved mark and size andsection including 18 gauge sheet and shutter shell be provide with one coat of red oxide priming and therate including all labour charges and transporting charges etc.,
ELECTRICAL WORKS Supply and fixing of 18W LED 3000K squire type relussed fitting complete with TW round block on wall or ceiling with flu.tube unsheathed copper leads from terimenal to light fitting etc.,
Supplying and fixing MCB isolator 32A TP withearth connection .
Supply and run off 2*1.5 sqmm (22/0.3)PVC insulated SC unsheathed Cu.condoctor of 1100v grade inrigid pipe concealed in wall and ceiling with contineous earth wire connection of 14SWG TC wire and making good of the concealed portion with suitable colour.
Supplying and laying of 70mmArmoured aluminium cable for control panel board .The rate including cost and conveyance of cable at site ,all labour charges for laying work and other incidental charges etc., complete.
MS pipe fabrication for polycarpbonate sheet,supplying and fixing MS angles for baricading,vertical poly carbonate portion etc., complete.
Supplying and fixing 0f Polycarbonate Hallow sheet white/colour 6mmyhick including cost and conveyance of sheets,aluminium beedings and rubber beebeedings and self threaded screws with washers and all labour charges for erection of sheets etc., complete
Desighning,manufacturing,supplying,instalation,Testing and commissioning of PANEL BOARD in CRCA 1.5*1.22mm sheet of size 2.90*1.55*0.25Mtr with200A TPN SFU incoming capacity,having 30 number of Meter board with 40AAP ELCS (APN) one number of 32A fuse carrier in one BUSBAR,1 set of RYB indicating lamp,one number of SMC BUSBAR support and necessary length 0f 4 sqmm wire with socket and with necessary 25*3mm DOUBLE side earth plate link for 30 number of single phase service and one number of 3 phase service.The rate including cost and conveyance of all materials,all labour charges for erecting and testing etc., complete.
Painting two coats with ready mixed plastic emulsion paint of 1st class qualityand approvedcolour over apriming coat including necessary plaster of paris putty wherever necessary required etc.,
Finishing the top of floor with Granolithic Finish with CC 1: 2: 4 (one cement, two sand & four HBG jelly) using chips of grade 10 mm and below for 25mm thickness and rubbed smooth etc, complete as per(20mm TK)
Add GST 18%
PR Construction And Company
stage.html
html • 0.04 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .