REPAIRS/MAINT OF CHEQURED TILES IN FOOTPATH , COMPOUND WALL AND FENCING AND CERTAIN B/R WORK, REPAIR TO DRAINAGE AT CERTAIN PLACES AT INS KBN AND RS(P) UNDER GE TIRUNELVELI

Amount

SCHEDULE 'A' PART -I(B/R PORTION)

Demolition of brick or stone masonry built in cement mortar including all quoins,arches,pillers etc but excluding ashlar facings,dressed stone work and precast concrete articles.

Material and labour for walling of random rubble stone masonry, brought to coursed well bonded, bedded and solidly hearted built in CM 1:6 including through stone/bonders complete all as specified and as directed .

Material and labour for walling of random rubble stone masonry, brought to coursed well bonded, bedded and solidly hearted built in CM 1:6 except stone/boulder including removing of mortar and cleaning of stones , stack measurement ,extra handling and disposal off debris/rubbish complete all as specified and as directed .

Demolition of cement concrete (unreinforced) in ground floor and in paving not exceeding 15 cm thickness (below or above ground level) complete all as specified and as directed.

Material and labour plain cement concrete 1:4:8 type D2 using 40 mm graded stone aggregate as in foundations and mass concrete all as specified and as directed.

Demolition of reinforced cement concrete in beam,footing or of any description and in any position not other wise specifically provided for, and removal demolished materials complete all as directed.

Material and labour for Reinforced cement concrete, M30 Design mix using 20mm graded stone aggregate as in as in foundation, footing, base of column, plinth beams and the like any thickness including attached pillasters etc all as specified and as directed.

Material and labour for Reinforced cement concrete, M30 Design mix using 20mm graded stone aggregate as in column, pillar,piers etc all as specified and as directed.

Material and labour for Reinforced cement concrete, M30 Design mix using 20mm graded stone aggregate as in beam,cantilever beams etc all as specified and as directed.

Material and Labour for TMT bar 10mm dia and over, cut to length, bent to shape required, including cranking,bending spirally for hooping ,for columns,hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed.

Material and labour for Mild steel TMT bars 6 to 8mm dia, cut to length, bent to shape required, including cranking bending spirally for hooping ends and binding with and including mild steel wire annealed not less than 0.9 mm dia or securing with clips all as specified and as directed.

Material and Labour for reinforcement Mild steel TMT bars 5 mm to 10 mm dia., cut to length, bent to shape required, in stirrups, spacers and binders and binding with mild steel wire (annealed) not less than 0.9 mm dia., or securing with clips complete all as specified and directed.

Use and waste of form work to sidees of concrete foundatioon, raft, footing, base of column, plinth beams etc rough finished surfaces all as specified and as directed.

Use and waste of formwork to sides of pillars, posts, struts, piles, columns and stanchions, etc to give rough finished to square, rectangular surfaces of concrete complete all as specified and as directed.

use and waste of Formwork to sides and soffits of Beams, cantilevers, lintels,including supports, overhangs, etc for flat rough finished surface of concrete complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for all as directed.

Dismantling of concertina coil dia 850mm to 1200mm or any size or description complete all as specified and directed.

Supply and Fix razor blade galvanised concertina coil of 1050mm diametre made out of 2.59mm thick galvanised wire having weight of each coil @ 15.2Kg+/-5%, stretched to a length of 10 to 12 M to achieve 950mm dia as in fencing to steel posts and to another coil/MS ribs including fixing with special galvanised fastners such as J clips, U clips C clips etc, fixed in position complete all as specified and as directed. NOTE: Linear measurement(per running metre of concertina coil of 1050mm dia) shall be measured and paid.

S&F in repairs Galvanized 2 strand steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spaings and straining and fixing to any type of standard rails straining bolts including securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins etc a directed (each line of wire to be measured)

Supply and Fix mild steel Framed work such as grills etc. with ends of bars shouldered and/or riveted, framed guard bars and similar work conforming to Fe-290, Gde-E-165 all as specified and directed.

Supply and fix mild steel posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed.

M&L for Preparation of new untreated steel surfaces of any description, over 10 cm width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide primer all as specified and as directed.

Extra over stone walling for hammer dressing to face stones and dressing of face beds and joints as specified, of random rubble walling with maximum depression on face from straight edge held against the dressed surface not exceeding 40mm all as specified and as directed.

Material and labour for Keyed pointing to random rubble stone masonry in cm 1:4 all as specified and as directed.

Material and labour for plain cement concrete 1:4:8 type D-2 using 40 mm graded stone aggregate 100 mm thick in sub base of floors including necessary form work all as specified and as directed.

Material and labour for chequered Cement concrete tiles 20cm x 20cm x 25mm with grey cement and pigment, hydraulically machine pressed, set, jointed and pointed in neat cement slurry with coloured pigment to match colour of tiles, over and including 20mm thick screed in CM 1:4 in floors complete all as specified and as directed.

Material and labour for Brick work with sub class 'B' brick straight or curved on plan exc 6m mean radius and built in CM 1:6 complete all as specified and as directed.

Material and labour for providing cement concrete 1:2:4 type B1 using 20 mm graded stone aggregate cast in situ as in copings and the like including weathering, slightly rounded or chamfered or chamfered angles and throating including use of form work as necessary all as specified and as directed.

Taking down cement plaster on brick or stone wall etc including raking out joints, hacking for key scrubbing down with water etc complete all as specified and as directed.

Material and labour for Rendering in CM 1:6,15mm thick on fair faces of brick work finished even and smooth without using extra cement complete all as specified and as directed.

Material and labour for Rendering in CM 1:4, 15mm thick on fair faces of brick work finished even and smooth without using extra cement on external surface complete all as specified and as directed.

Material and Labour for two coats of white wash over wall surfaces including prepration complete all as specified and directed.

Material and labour applying a coat of cement base paint over one coat of primer on wall surfaces including preparation of surfaces complete all as specified and as directed

Material and Labour for one coats of white wash on old wall surfaces including prepration complete all as specified and directed.

Demolition of plain cement concrete of any description and in any position complete all as specified and as directed.

Material and labour plain cement concrete 1:7:12 type F2 using 40 mm graded stone aggregate as in foundations and mass concrete all as specified and as directed.

Material and labour for 15mm thick rendering in cement mortar 1:3, on fair faces of brick/concrete surfaces finished even and smooth with out using extra cement using water proofing compound all as specified and as directed. Note: Water proofing compound shall be measured separately.

Material and labour for cement concrete 1:2:4 type B-0 using 12.5 mm graded stone aggregate 25mm thick in sunken floors finished even and smooth with extra cement and add with WPC including necessary form work complete all as specified and as directed. Note: Water proofing compound shall be measured separately.

Material and labour for cement concrete 1:2:4 type B-0 using 12.5 mm graded stone aggregate 25mm thick in floors finished even and smooth with extra cement including necessary form work complete all as specified and as directed.

Material and labour for coloured non skid ceramic tiles 7 to 8 mm thick, area of each tile exceeding 0.06 Sqm but not exceeding 0.11 Sqm in flooring, laid over and including 15mm thick screed in CM 1:4, set and jointed in neat cement slurry and pointed in coloured cement to match etc complete all as specified and as directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding but not backing removing materials and rubbish off the premises complete all as specified and as directed.

Material and labour for glazed ceramic jointless coloured tiles in vertical surface 450x300x7mm set and jointed in neat cement slurry over and including provision of bedding layer 10mm thick in CM 1:3 complete all as specified and directed.

Supply only water proofing compound complete all as specified and as directed.

Taking up or down steel tubing 15 mm bore including connections, cleaning for refixing or removal to store complete all as directed.

Taking up or down steel tubing 20 mm bore including connections, cleaning for refixing or removal to store complete all as directed.

Taking up or down steel tubing 25 mm bore including connections, cleaning for refixing or removal to store complete all as directed.

Supplying and laying glavanised iron pipes of 15 mm bore medium grade including fittings and fixtures, laid in floor or fixed on wall/ceiling complete all as specified and as directed. Note:- GI pipe shall be fixed in GI sliding grip holder embeded in wall at an interval not exe 75cm as approved by Eng-in-charge.

Supplying and laying glavanised iron pipes of 20 mm bore medium grade including fittings and fixtures, laid in floor or fixed on wall/ceiling complete all as specified and as directed. Note:- GI pipe shall be fixed in GI sliding grip holder embeded in wall at an interval not exe 75cm as approved by Eng-in-charge.

Supplying and laying glavanised iron pipes of 25 mm bore medium grade including fittings and fixtures, laid in floor or fixed on wall/ceiling complete all as specified and as directed. Note:- GI pipe shall be fixed in GI sliding grip holder embeded in wall at an interval not exe 75cm as approved by Eng-in-charge.

Fixing only 20 mm dia old serviceable galvanized steel tubing medium grade including all fittings and short tube pieces, fixed complete to walls and ceilings or laid in floors complete all as specified and as directed.

Supply and fix in repair of PVC pipe (SWR) single socketed in any length with rubber ring joint, laid in trenches/wall 110mm dia complete all as specified and as directed.

Supply and fix in repair of PVC pipe (SWR) single socketed in any length with rubber ring joint, laid in trenches/wall 75mm dia complete all as specified and as directed.

Supply and fix in repair of 110 mm PVC (SWR) bends with access door complete all as specified and as directed.

Supply and fix in repair of 75 mm PVC (SWR) bends with access door complete all as specified and as directed.

S&F in repairs PVC (SWR) floor trap, plain with grating including jointing with solvent cement 75 mm dia outlet complete all as specified and as directed.

Supply and fix in repair vitreous china of orissa pattern long pan size 580 mm x 440 mm white with integral foot rests (excluding flushing cistern and flush pipe) including 110mm dia PVC(SWR) P trap & provision of cement concrete bedding and making good to floor match with adjoining complete all as specified and as directed.

Supply and fix in repair wash basin vitrous china flat back of size 550x400mm including waste fitting brass chromium plated 32mm with long and fly nut screwed shank, waste chain and plug and porceline stopper excluding tap but brackets including cutting for and pinning in ends of brackets or erecting stand including waste pipe complete all as specified and directed.

Supply and fix in repair of PVC valveless syphonic action type flushing cistern 10 ltr capacity low level ,white with inlet,ball valve float and handle including 32mm dia flush pipe & brackets complete all as specified and as directed.

Supply and fix in repair of 15 mm fancy type pillar taps cast copper alloy with capstan heads chromium plated screwed down high pressure with and without levelled hot or cold with long screwed shanks and fly nuts screwed for pipe and fixed complete all as specified and as directed.

Supply and fix in repair of Bib taps of 15mm dia, cast copper alloy chromium plated fancy type with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and as directed.

Supply and fix in repairs stop valves, cast copper alloy, screwed down, high pressure with crutch or butterfly handle of 15mm dia screwed both ends for iron pipe or for unions complete all as specified and as directed.

S&F in repairs PVC connection 15 mm size with PTMT nuts of length 450 mm long complete all as specified and as directed.

Cutting holes in brick walls built in cement mortar, depth of embedded portion of holdfasts or lugs measured from the face of the jamb into the wall exc half brick wall but not exc one brick wall for inserting holdfasts and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 complete all as specified and directed.

Supplying and laying glavanised iron pipes of 40 mm bore medium grade for spout pipe fixed from inner surface of the wall including cutting holes and making good of distrubed area match with adjoining surface complete all as specified and as directed.

Taking down shutters of any description exc 1 sqm and n.exc 2 Sqm each etc complete all as specified and as directed.

Supply and Fix in repairs stop valve 15mm dia fancy type chromium plated with long shank and cup (concealed type) all as specified and directed by the Engr-n-charge.

Removing of existing mechanical operated rolling shutter of each area exe. 20 Sqm but not exe. 25 Sqm and refixing the same in same location after necessary repairing,greasing, servicing complete all as specified and as directed.

Material and labour for Brick work with fly ash brick built in CM 1 : 6, straight or curved on plan exc 6m mean radius on plan complete all as specified and directed.

Material and labour for Brick work with sub calass 'B' brick straight or curved on plan exc 6m mean radius and built in CM 1:6 but except brick complete all as specified and as directed.

Material and labour for Precast reinforced cement concrete 1:2:4 type B1 using 20mm graded stone aggregate for cover slabs of man holes including necessary form work, placed in position, set in CM 1:6 complete all specified and as directed.

Material and labour for providing cement concrete 1:2:4 type B0 using 12.5 mm graded stone aggregate cast in situ as in copings and the like including weathering, slightly rounded or chamfered or chamfered angles and throating including use of form work as necessary complete all as specified and as directed.

Removing mortar from and cleaning stones, obtained from masonry of any description (except ashlar facings and dressed stone work) and stone setts from pavings; stacking for measurement including all extra handling and removal and disposing off rubbish complete all as specified and as directed.

Raking out joints/pointing to random rubble or polygonal rubble uncoursed or brought up to courses built in cement mortar complete all as specified and as directed.

VVM CONSTRUCTIONS

AnnaiEnterprises

JR ENTERPRISES

sri manikandan enterprises