Repair Renovation of existing plinth with shed for installation of 500 kg composite machine near toilet Block No-01 at BCS Dheerthi Dhaore, Katra, Reasi,

CONSTRUCTION WORKS

Earth work in excavation by mechanical means (hydrauic excavator )/ manual means in foundation trenches or drains (not exceeding 1.5m in width or 10 sqr on plan) including dressing of sides and ramming of bottoms lift upto 1.5 m including getting out the excavated soil and disposal of surplus excavated soil as directed within an lead of 50m: all kinds of soil.

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering All work up to plinth level. 1:3:6(1Cement:3 coarse sand (zone-III):6 graded stone aggregate 40 m nominal size)

Providing and laying in position cement concrete of specified grade excluding the cost of cenering and shuttering -All work upto plinth level: 1:5:10(1Cement:5fine sand:10 graded stone aggregate 40 mm nominal size)

Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering shuttering finishing and reinforcement_ All work upto plinth level: 1:1:5:3(1Cement:1.5 coarse sand (zone-III):3 graded stone aggregate 20mm nominal size)

Centering and shuttering including strutting. Propping etc. and removal of from for all heights :Fundations footings bases of columns, etc for mass concrete.

Steel reinforcement for R.C.C work including straightening, cutting bending placing in position and binding all complete above plinth level. Thermo_mechanicall Treated bars of grade Fe-500D or more.

Providing and laying in position cement concrete of specified grade excluding the cost of cenering and shuttering -All work upto plinth level: 1:2:4:(1Cement:2 coarse sand, (zone-III):4 grade store aggregate 20 mm nominal size.

Supplying and filling in plinth with sand under floors including watering ramming consolidating and dresing complete.

Cement plaster (IN FINE SAND) 12MM Cement plaster of mix 1:6(1 Cement :6 fine sand)

Finishing walls with Acrylic Smooth exterior paint of required shade: new work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @2.20 kg/10 sqm)

Steel work in built up tublular (round square or rectangular hollow tubes etc )trusses etc, including cutting hoisting fixing in position and applying a priming coat of approved steel primer including welding and bolted with special shaped washers etc complete. Hot finished welded tupe tubes.

Providing corrugated G.S sheet roofing including vertical/ curved surface fixed with polymer coated J or L hooks bolts and nuts 8 mm ciameter with bitumen and G.I limpet washers or with G.I limpet washers filled with white lead including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete(up to any pitch in horizontal/ vertical or vurved surfaces) excluding the cost of pulins rafters and trusses and including cutting to size and shape wherever reuired. 0.63 mm thick with zin coating not less than 275 gm/m2.

Providing ridges or hips of width 60 cm overall width plain G.S sheet fixed with polymer coated J or L hooks bolts and nuts 8 mm dia G.I limpet and bitumen washers complete. 0.63 mm thick with zinc coating not less than 275 gm/m2 .

M/s Aditya Enterprises

M/s Sonia Enterprises