8269 SPECIAL REPAIRS TO TYPE-I QUARTER (BLOCK 1 AND 4 - 16 QTRS) AT DAD RESIDENTIAL COMPLEX OF WING A AT WANOWARIE RANGE PUNE UNDER GE SOUTH PUNE

Amount

Demolition of cement concrete of any description in any position in sunken floor and roof slab padding & like etc including removal of debris outside MD land and dumping ground will be sorted out by contractor at their own arrangement complete all as specified and as directed.

M & L for Water proofing treatment to RCC roof slab, walls, chhajjas etc, shall be carried out as specified below including Removing of existing bitumenous tarfelt including cement screed bed and clean the surface with wire brush and washing with water to achieve the original surface of slab including removing of bitumen primer applied on slab all as spd and as directed (a) Preparing plastered surfaces of roof slab, walls, chhajjas etc, by brooming with broom sweeping free from dirt dust etc & evenly applying a coat of ShaliTex primer (solvent based bituminous primer) conforms to IS: 3384-1986 coat of ShaliTex primer @ 0.3 Kg/Sqm shall be applied on the prepared and cleaned roof surface and parapet. Ensure not to apply when temperature is less than 5° C or during foggy period. Primer shall be allowed to dry for overnight. (b) Providing and laying APP (Atactic Polypropylene polymer) 3mm thick SuperThermolay Spun bonded non woven polyester reinforced APP modified water proofing membrane, black finished reinforced with non woven polyester matt weight not less than 3.5 Kg/Sqm manufactured by STP Ltd. The laying of membrane with a 75 mm longitudinal and 100mm transverse direction overlap shall be provided. (ITEM NO. 2 Contd below)

(ITEM NO. 2 Contd.....) (c) Apply SuperThermolay APP 3mm and weight not less than 3.50 Kg/Sqm thick membrane on primer, membrane shall be laid using LPG torch and sealing all joints etc . and preparing surface complete. (d) Finally applying a coat of Super Silver Shield confirmed to IS: solar reflective bituminous aluminium paint @ 0.15 ltr/Sqm on the top of membrane surfaces complete all as specified & as directed by Engr in Charge. (Make: STP Ltd or equivalent in Supremo/ pidilite/fosroc) Note : i) Work should be done by STP Ltd (OEM) /fosroc /Pidilite /Suprimo (OEM) respective applicator & work should be able to furnish stagewise on site technical reports from concerned company technologist during currency of work and entire completion of work. ii) Contractor shall submitt 10 year OEM guarantee for water proof treatment.

M&L for two coats of bond coat @ 0.42 Kg/Sqm for two coats to exposed concrete surface/exposed steel surface for receving concrete/plaster etc complete including cleaning of existing concrete surface and steel reinforcement if any throughly by wire brushing or using compresor air to remove dust and laitance to free from oil to receive further treatment complete all as specified and as directed. [Make : Araldite, STP Ltd (Shalibond Concrete), Fosroc as approved by GE ]

M&L for 10 mm thick ready mix plaster/screed bed layer in CM 1:4 on concrete surfaces including WPC & plasticizer as per manufacturer instruction complete all as specified and directed. [Note : WPC / plasticizer will be measured & paid seperatly]

M&L for PCC 1:2:4 type B1 using 20 mm graded agg as in PCC padding in roof kerbs or mud stops, rounded and chamfered on edges and on chajjas laid over RCC surface finished even and smooth without using extra cement includng necessary water proofing chemicals all as specified and directed (Note : WPC shall be measured and paid separately)

M & L for 40mm thick Cement concrete type B-1, 1:2:4 (20mm graded aggregate) over cement slurry @ 0.488 kg/Sqm with WPC laid in slope 1:20 towards external walls complete all as specified and as directed. (Note : WPC shall be measured and paid separately)

M & L for cutting holes into or through brick wall or RCC surface complete all as specified and as directed.

Rendering 15mm thick in CM (1:4) on fair faces of brick work or concrete surface with water proofing compound and apply cement slurry @ 0.242Kg/Sqm and this layer will be allowed to air cure for 4 hours complete all as specified and as directed. (Note : WPC shall be measured and paid separately)

S & F GI tube 50mm bore medium grade complete all as specified and as directed.

Preparing plastered surfaces of sunken slab, walls, junctions etc, by brooming with broom sweeping free from dirt dust etc & Applying evenly a tack coat of industrial bitumen 85/25 at the rate of 1.2 kg per sqm complete all as specified and as directed.

M&L for PCC 1:5:10 type E2 using 40mm graded stone aggregate as in foundation filling and mass concrete (sunken floors etc.) complete all as specified and as directed.

Supply only necessary plasticizers complete all as specified and as directed. (Make:- Pidilite CF 21 by Pidilite, P211 by Fosroc, ShaliPlast LW+ by STP Ltd.) [Note : Contractor shall bring complete material incorporated in work with concern executive.]

M & L for scrapping and removing old paint stains, loose material and algae- fungus growth then cleaning of surface with water using pressure washer machine then crack filling with acrylic based textured crack filler an application of one coat of primero-primer cum sealer having alkali resistence properly diluted with water and mixed with bio block in ratio 5:4:1 follwed by application of two coats of modified acrylic Apex exterior emulsion paint of approved shade having silicon addditive in paint which gives five year of performance warranty complete all as specified and as directed [Note:- (i) The work should be done by Asian paints recommended applicator and the bidder should be able to furnish stage wise on site technical reports from the concerened company technologist. (ii) rate quoted shall inclusive to carry out repair of plaster in CM 1:4 to match the existing thickness of surfaces including taking down plaster in patches not exc 1.00 sqm as directed. (iii) Rate quoted shall deemed to be inclusive of necessary scaffolding / security measures as the work is to be carried out for elevated height up to 12 Mtr height building.]

Taking up or down carefully steel tubing and connections including cleaning for refixing or removal to store of following size :-

15mm bore

20mm bore

S&F GI tubing tubes "medium grade" galvanized with all fittings and fixed complete to walls and ceiling or laid in floors etc (concealed type) of the following size :-

15mm bore

20mm bore

Taking down /cutting steel windows shutter by means of gas cutter W/O disturbing of sofit / jambs / cills etc of any description n.exc 1.5 sqm (without taking off Guard bar) complete all as specified and as directed.

S & F glass ventilators louver type using 4 mm thick plain/tinted glass, and using following aluminium powder coated sections conforming to catalogue of 'JINDAL' or of equivalent make and rubber beading etc complete all as specified and directed. SP 20048 Glazing Clips 19352

S & F three track sliding window with two or more shutter with 4 mm thick tinted as approved glass, one shutter using stainless steel wire cloth 0.36mm nominal dia & 1.18mm width aperture for mosquito proofing with good quality bearing, handle, lock, rubber beading and glazing clips etc using following aluminium powder coated sections conforming to catalogue of 'JINDAL' or of equivalent make complete all as specified and directed by Engr-in-Charge:- (a) Bottom frame 20620 (b) Top frame & vertical 20621 (c) Handle (side) 20606 (d) Shutter inter lock 20724 (e) Shutter top & bottom 20844 (f) Glazing Clip 19352

Dismantling floor, hearth or wall tiling incl cement mortar bedding but not backing removing rubbish off the premises complete all as specified and as directed.

M&L for coloured Ceramics tiles 450x300x7to8mm thick in vertical surfaces such as skirting dado set & jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles over and including 15mm thick rendering in cement mortar 1:4 on stone / brick/ concrete masonry surfaces complete all as specified and as directed.

M&L for Non skid ceramic colored tiles 7to8mm thick, (square/ rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm in floor etc. set and jointed in neat cement slurry & pointed in white or coloured cement to match including 15mm thick screed bed or bedding layer as in CM 1:6 complete all as specified and as directed.

Dismantling water tanks of capacity exc. 250 Ltrs and not exc. 500 ltrs removing to stores complete all as specified and as directed.

S&F rotational three layer moulded polythylene water storage tank, ISI Marked of (cylindrical vertical with colsed top) hoisted and fixed in postion all as spd and directed of 500 ltrs capacity incl 15 mm dia brass float incl tank nipple complete set. all as specified and as directed.

M&L for PCC 1:2:4, type B0 laid as base of water tank, roof slab and any other locations with water profing compound complete all as specified & directed.

Taking down cement plaster including hacking down etc complete all as specified and as directed.

M&L for rendering 15mm thick cement plaster 1:4 on concrete surfaces using water proofing compound of 3% by weight of cement with neeru finish to plastering complete all as specified and as directed. (Note :- WPC shall be measured and paid separately)

M&L for rendering 10mm thick cement plaster 1:6 on concrete surfaces finished even and smooth without using extra cement complete all as specified and as directed.

M&L for 5mm thick plastering in CM 1:3 on concrete surfaces of ceiling finished even smooth without using extra cement complete all as specified and directed.

M&L for new palstered surface of ceiling and applying two coats of white wash all as spd and directed by EIC.

M&L for preparing new plastered surfaces of wall, and 3mm thick punning coat with wall care putty applying two coats of oil bound distemper on walls over a coat of alkali resistant primer etc complete all as specified and directed.

Complete removal of existing treatment including M&L for applying 3mm thick punning coat with wall care putty and applying two coats of oil bound distemper on walls over a coat of alkali resistant primer etc complete all as specified and directed

Preparation of old decorated surfaces of ceiling and applying three coat of white wash complete all as specified and as directed.

S&F aluminium powder coated fancy type curtain rod 20mm bore complete all as specified & directed.

S & F MS CP brackets suitable for 20mm curtain rod (minimum projection from wall 75mm) fixed in wall including drilling, rawl plug, screws etc complete all as specified and directed

Taking down chawkats or frame with shutter (w/o taking off shutter from frame of wooden/steel) not exc 1.5 Sqm etc complete all as specified and as directed.

S&F solid PVC door frame of size 50mm x47mm made out of 5mm plain colour PVC sheet, reinforced with MS square tube, supplying and fixing in opening all as specified in item No. 884 of SSR Part-II complete all as specified and as directed.

S&F factory made prelam moulded solid panel PVC door shutter 30mm thick (stiles) consisting of frame made cut of M.S tubes for top & bottom rails; M.S frame shall be covered with heat moulded plain colour PVC ‘C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and single side prelaminated PVC sheet 5mm thick for top rail, lock rail and bottom rail and stile and rails having one side feathered edge, on other side 10mm 90° bent edge, panelling to be fitted in MS frame welded/sealed to the stiles and rails and 15mm thick PVC sheet beading inside and decorative PVC beading of 10mm x 10mm all as specified and directed and as per product Drg given on Sl. Page No. 157 of SSR Part-II 2010.

S&F aluminium anodised barrel tower bolts of extruded section 150 mm long complete all as specified & directed.

S&F aluminium anodised barrel tower bolts of extruded section 200 mm long complete all as specified & directed.

S&F aluminium handles, anodised, cast type, of size 150 mm complete all as specified & directed.

S&F aluminium alloy, anodised, sliding door bolts with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded section etc length of bolt 250 mm complete all as specified & directed.

Taking down Chowkats or frames exc 1.5 sqm but not exc 4 sqm each complete all as specified and as directed.

S & F pressed steel frames for doors with one or more rebates incl necessary fixing lugs, hinges, lock strike plate etc complete as specified size of frame 125 x 60mm filled with PCC 1:3:6 type C-0 complete all as specified and as directed.

S & F pressed steel frames for doors with one or more rebates incl necessary fixing lugs, hinges, lock strike plate etc complete as specified size of frame 105 x 60mm filled with PCC 1:3:6 type C-0 complete all as specified and as directed.

S & F 35mm thick 1st class hard wood glazed and skeleton shutter open rebated and prepared to receive glass, gauge, etc. edges of framing plain, chamfered or rounded fitted with cut and mitred beads for securing glass, etc; The size of the rail and stile as per IS 1003 (Part-I), Klin seasoned and chemically pressure treated complete all as specified and as directed.

S & F 35mm thick factory made, panelled shutter (two panel), 2nd class HW rail and style with lock rail and panel of 9mm BWP commercial ply or 12mm veneer particle board with commercial veneering on both faces. The size of the rail and as per IS 1003 (Part-I) Kiln seasoned and chemically pressure treated complete all as specified and as directed.

S & F 300 mm Mild steel sliding door bolts, plate type, stove enamelled black,with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate complete all as specified and as directed.

S&F in repairs 300mm MS ordinary rat tail rod pattern spring including roller and roller plate complete all as specified and as directed.

M&L for preparation of new / old wooden surfaces ex 10 cm width or girth and applying two coats of synthetic enamel paint over a cost of pink primer complete all as specified and as directed.

M&L for preparation of new or old steel surfaces exc 10cm width or girth and applying two coats of synthetics enamel paint over coats of red oxide zinc chrome primer complete all as specified and as directed.

S&F in repairs bib tap of cast copper alloys chromium plated fancy type with capstan heads screwed down screwed for iron pipe or for brass ferrule and fixed for 15mm dia pipe inclduing removing the old unserviceable bib taps fixed complete all as specified and as directed.

S&F in repairs pillars tap CP 15mm dia, cast copper alloy with swan neck pattern, screwed down high pressure with long screwed shanks and flynuts screwed for iron pipe and fixed complete all as specified and as directed.

S & F in repair stainless steel sink 1mm thick of size bowl size 410mm x 330mm x 160mm for kitchen with plugs, washers and CP wastes coupling etc by engraving in cuddapa and granite kitchen platform as directed as per site requirement including fixing if necessary brackets and connecting union to pipe and 40mm dia etc complete all as specified and directed.

S&F in repairs vitreous china, squatting pan, 'Orissa' pattern, size 580 x 440mm white of first quality with integral foot rest, including concrete bedding including all internal fitting, inlet, outlet pipe connections etc. complete all as specified and directed.

S&F in repair PVC Low level flushing cistern 10 ltrs capacity make ISI and first quality incl all internal fitting, pair of bracket, including inlet/outlet PVC pipe connections etc complete all as specified and as directed.

S&F in repair vitreous china wash hand basin, white, 550x400mm flat back including PVC waste pipe 32mm dia, CP brass waste coupling 32mm bore, PVC connection and pair of MS bracket of required size complete all as specified and directed.

S&F stop valve cast copper alloy chromium plated fancy type screwed down high pressure with capstan head screwed both ends for iron pipe or for unions and fixed in repairs complete 15mm bore complete all as specified and as directed.

S&F in repairs cast iron floor/Nahani trap with grating 75mm and 300mm long waste pipe including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) including removing old traps complete all as specifed and directed.

S & F in repairs salt glazed stone ware gully traps square of size 150 x 150 mm including setting & jointing to drains in CM (1 : 2) including earthwork, concrete in beds, surrounds, kerbs etc and CI grating etc complete complete all as specifed and directed.

S&F in repairs shower rose fancy type bass chromium plated 125 mm square heavy duty pattern with swivel joints type screwed for 15mm bore including jointing to pipe or unions complete all as specifed and directed.

S&F in repairs 15 mm bore stop valve cast copper alloy chromium plated fancy type with long shank and cup consealed type secrewed both ends for iron pipe or for unions fixed complete all as specified and as directed.

S&F in repairs high density polythene pipe 40mm blue in colour HDPE at pressure rating 6kg/cm2 fixed complete to wall or floor incl bend tee elbow etc for waste pipe at wash basin /flush tank complete all as specifed and directed.

S&F in repairs Tubular towel rail 600mm long of 20mm chromium plated brass screws and wooden/plastic cleats complete all as specifed and directed.

S&F in repairs steel grating of 100mm in size for nahani trap/floor including jointing complete all as specifed and directed.

S&F in repairs for 110 mm PVC SWR pipes single socketed in any length with rubber ring joints fixed to wall including clamp etc complete all as specifed and directed.

S&F in repairs for 75 mm PVC SWR pipes single socketed in any length with rubber ring joints fixed to wall/Floor including clamp etc complete all as specifed and directed.

S&F PVC (SWR) bends plain 110 mm bore complete all as specifed and directed.

S&F PVC(SWR) bends plain 75mm bore complete all as specifed and directed.

S&F PVC (SWR) bends any radius 110 mm bore provided with access door complete all as specifed and directed.

S&F PVC (SWR) bends any radius 75 mm bore provided with access door complete all as specifed and directed.

S&F in repairs gun metal globe or gate valve with iron wheel head screwed both ends for iron pipe and fixed bore of pipe 20 mm complete all as specified & directed.

S & F Machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing completelaid over and including 20mm screed bed in cement mortar (1:6) including cutting for engraving for steps complete all as specified and as directed.

S & F Kota stone slab 20-25mm thick in riser of steps, skirting, dado and pillar laid over and including 15mm screed bed in cement mortar (1:4) including cutting for engraving for steps complete all as specified and as directed.

S & F Machine cut cuddappa stone slab one side polished 20 to 25mm thick, set and jointed in neat cement slurry and pointed in coloured cement to match, laid over and including 20mm screed bed in cement mortar (1:6) including cutting for engraving kitchen sink etc directed as per site requirement complete all as specified and as directed.

M & L for granite of Z black coloured (table rubbed and polished) in platform, shelves vertical partitions for urinals & like of 16 to 18 mm thick with admixture of pigment to match with shade of granite including rounding of one edge of stone slab as directed including cutting for engraving kitchen sink etc as directed as per site requirement including bedding layer in CM 1:4 etc complete all as specified and as directed.

Demolition of Brickwork or stone/boulder masonry, build in cement mortar including all quoins, arches, pillars etc, but excluding ashlars facings, dressed stonework and precast concrete articles complete all as specified and as directed.

M & L for solid block masonary exc. 10 cm width blocks of PCC design mix Gde C-5 set in CM (1:6) complete all as specified & directed.

M&L for PCC 1:3:6 type C-2, (using 40mm graded stone aggregate), 75mm thick, laid in alternate bays including finishing the surfaces even and smooth using extra cement complete all as specified & directed.

M&L for 12mm thick PVC Ply board both side decorated choice coloured as approved shade fixed as in kitchen / cupboard shelves and shutters of almirahs including necessary required teak wood, batten frames of size 50 x 30 mm and including teak wood lipping all around the edges and with Stainless steel piano hinges etc complete all as specified and as directed as per site requirement.

S & F in stainless steel Plate rack made of sheet grade SS-304, thickness not less 0.63 mm of standard size (36" x 36" x 10") & approved quality of finish, all as specified & directed.

Dismantling wrought rion or mild steel iron of any description not otherwise provide for.

S & F rolled mild steel section conforming to grade E-165 (Fe-290) framed work as in door or gates of angle or other section with gusset plates rails , braces, etc complete drilled for fixing of steel sheeting or other covering doors, etc to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings and hanging, fastening, etc complete all as specified and as directed.

Demolition of cement concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level)complete all as specified and as directed.

M&L for PCC 1:4:8, type D2, using 40 mm graded aggregate 75 mm thick as in sub floor, Sub base, floor complete all as specified & directed.

M&L for precast coloured, chequered cement concrete tiles, glossy finish of size 305 x 305 x 25 mm thick, conforming to IS-1237 (2006) set jointed and pointed in neat cement slurry in floor laid over and including 20mm thick screed bed in CM (1:6) complete all as specified and as directed.

Taking down aluminium point wiring( light, fan, socket or power) complete, including fixtures and fittings such as switches, ceiling roses, pendants holder,regulators sockets, light fitting etc removing materials deposited to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc.as per engr-in-charge.

Taking down MCB DB / Main switch, old unserviceable / worn out aluminium sub main of any type and size complete all as specified and as directed.

M&L for point wiring of any length using approved colour coding as per IS,with stranded copper conductor 1.5 Sqmm (Nominal area), single core,PVC insulated and unsheathed stranded FRLS cable 1100 volts grade, ISI - 694 marked in and including heavy duty,PVC casing caping including all accessories etc., heavy duty ISI marked, mild steel concealed sunken boxes,1.6 mm thick and 60 mm depth with earth dolly duly painted with two coat of black bituminious paint over a coat of red oxide primer with laminated bakelite sheet of min. thickness of 3mm suitable for switches/sockets,etc,including PVC insulated stranded copper conductor 1.5 Sq.mm (nominal area) single core green PVC insulated FRLS cable as earth and connecting to earth dolly complete and including cutting and chases in the wall for box and all as specified for the following:- (Note:- Making good of disturbed surfaces will be done by contractor without any claims.)

One light / fan / point controlled by one switch.

One 5 Amps Socket outlet point controlled by one switch on independent board.

One 5 amps socket outlet point on same board with other switches

One bell / buzzer point controlled by one bell push

All as per item No. 89.00 here in above but wiring complete with 4.0 Sqmm for 3 pin 15 A socket multipurpose on independent board complete all as specified and as directed.

S & F 240 V, 20 amp Single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB complete all as specified and as directed.

S&F piano type switch 5 amps single pole,240 volts complete all as specified and as directed.

S&F bell push,flush type,5 amp,240 volts complete all as specified and as directed.

S&F bell electrical ding dong including hard\wood board bell push, flush type, 5 amp, 240 volts complete all as specified and as directed.

S&F ceiling rose surface type three terminals, 240 volts complete all as specified and as directed.

S&F socket outlet 5 amps 5 pin 230 volts flush type on same board complete all as specified and as directed.

S&F socket outlet multipurpose 2 in 1, 5/15 amps, 230volts flush type complete all as specified and as directed.

S&F piano type switch 15 amps single pole,240 volts complete all as specified and as directed.

S&F lamp holder (Angle/bracket) insulated body, with back plate for batten fittings with 5 watt LED bulb complete etc. complete all as specified and as directed.

S&F in replacement of ceiling fan regulator, electronic step type, delux, suitable for fan 48"/56" sweep complete all as directed

M & L for Sub main wiring complete with two single core 4 sqmm,1100 volts grade, PVC insulated, stranded copper conductor FRLS cable with continuous copper earth conductor of 4 sqmm in and including PVC conduit complete all as specified and directed [Note :- (i)Making good of disturbed surfaces will be done by contractor without any claims. (ii) 3 runs of 4 Sqmm conductor and one run of PVC conduit shall be measured as one unit length.]

S&F MCB DB VTPN 4 way double door with 200 amps rated busbar 415 V, recess mounted/wall mounted complete all as specified and as directed.

S&F MCB DB SPN 8 way ,double door, with 200 amp rated busbar 240 V,recess mounted complete all as specified and directed.

S&F vertical 8 way TPN double door,recess mounted/wall mounted DB incl one number,MCCB as incomer 4 pole of 100A rated capacity & 16KA breaking capacity,pre-fitted at factory complete all as specified and directed.

S&F MCB SP 6-32amps,10KA,'C' series complete all as specified and as directed.

S&F MCB SPN 10-40 amps,10KA, 240V,'C' series complete all as specified and as directed.

S&F MCB TPN 63 amps ,10KA,415 V,'C' series complete all as specified and as directed.

M & L for earthing with galvanised steel earth plate electrode 60 cm x 60 cm x 6 mm buried directly in ground earth pit not less than 2.25 m deep below normal ground level, with top edge of the plate vertically to a depth of not less than 1.5 m below ground level connected to and incl GI wire 4 mm dia and GI pipe 15 mm dia light grade for protection to the extent of 7.5 m as earthing lead by means of GI bolts and nuts etc connecting to equipment with provn of charcoal and salt etc all as per electrical plate No 3 of SSR Pt-I incl RCC cover, watering arrangement with GI pipe 20 mm dia and MS funnel, concrete pit incl excavation and earth work in any type of soil and testing on completion etc complete (NOTE :- GI earth wire and protection pipe beyond 7.5m will be measured and paid separately)

M & L For fixing earth continuity conductor or main earth lead fixed to wall or buried in ground or drawn in GI pipe with 4 sqmm GI Wire complete all as specified and as directed.

Supplying and fixing LED tube light fitting complete with all fitting and fixing accessories, 1X20 Watt pre-wired with high efficiency electronic driver,glare free,smooth light distribution comforming to CAT Part No.Garnet 20 W LED (D532065) of Wipro or of equivelent in Havells/HPL/Philips complete all as specified and as directed.

Supply and fixing Integral LED Security Light Luminaire 30 W comprising of epoxy powder coated aluminium housing, enclosed with glass cover in frame suitable for 50/40 mm GI Pipe (including GI pipe) complete with accessories conforming to Cat Part No : HPLLEDSL3060S of HPL or of equivalent in Wipro / Phillips / Havells all as specified here-in-after including taking down old fitting.

S&F in replacement of sleek LED Cadila mirror light fitting complete in all respect having high output diffuser of 2 feet length,9 W LED conforming to Cat Part No HLPLEDCAD09CW of HPL or of equivalent in Havells/Philips/Wipro make specified here- in - after.

S&F city-4 decorative wall light fixture made up of polycarbonate suitable for 15W TU retrofit CFL(B-22 base) conforming to cat part No LHFODFE1TC1W015 of Havells or of equivalent make in Wipro/Philips complete all as specified and as directed by engr-in -Charge.

Excavation in trenches n.exc 1.5mtr wide and n.exc. 1.5m in depth for laying cable, foundation and getting out in soft/loose soil complete all as specified and as directed

Returning filling in soil including spreading, levelling, watering and well ramming in layers n.exc. 25cm complete all as specified and as directed

Removing excavated material not exceeding 50mtr and depositing where directed at a level n.exc 1.5 mtr above the starting point all as specified and directed by Engr-in-Charge.

M&L for laying RCC pipes class NP-2 with one collar per length of pipe of 100mm bore, 2 Nos half round (for bottom and top) and before laying excavated area shall be levelling complete all as specified and as directed

Supply, lay, test, connecting and commissioning under ground cable, LT 1100 volts grade, heavy duty XLPE insulated, armoured with aluminium stranded conductor of size 3.5 Core 35sqmm complete laid in trenches/fixed to poles/drawn through pipes with suitable size cable glands crimping type cable lugs etc all as specified and directed

Supply and spreading fine dry river sand for cushioning to UG cable including spreading, levelling and hand punning etc. complete all as specified and directed. (Note : The punned thickness shall only be measured for payment.)

Supply and laying bricks, common burnt clay sub class "B" (Designated 75) locally available best quality laid dry in trenches for protection of UG cable complete all as specified and as directed.

Supply and laying of GI tubing 'Light Grade' for cable protection and fixing to existing pole with flat iron clamps 25x3mm including nuts bolts and washers etc complete for 50mm bore complete all as specified and as directed.

Anand Trading Co

SARATH ENTERPRISES

M/s.BAJRANG CONSTRUCTION

Gauri Associates

M/S Sandeep Enterprises

Takshashila electricals