REPAIR REPLACEMENT OF INTERNAL ELECTRIFICATION OF CERTAIN OTM AND MD ACCN IN SOUTH AREA AT NASIRABAD

Amount

Taking down carefully copper / aluminium point wiring complete with concealed/surface conduit/casing caping wiring including fitting and fixtures such as switches, sockets, holders, ceiling rose, regulators, light fittings, tube light fittings etc removing from site and making good the disturbed surface of walls/ceiling etc complete all as specified and directed.

Disconnecting of unserviceable sub main wiring/service connection of any size and including steel/PVC conduit and accessories and removing from site and making good disturbed surfaces complete all as specified and directed.

Disconnecting electric connections and taking down old unserviceable MCB SPN/SP/TP and DB's of any capacity and removing from site complete all as specified and directed.

Taking down carefully by unscrewing from boards/ outlet boxes, fittings and fixtures such as switches, sockets, holders, fan regulators, tube light firrings, bulk head fittings etc for reuse at site or carrying to the store (To be measured only when found serviceable in all respects complete for reuse) complete all as specified and directed.

M & L for point wiring with 1.5 sqmm single core multi stranded copper conductor PVC insulated unsheathed (FRLS) cable 1100 volts grade drawn through and including non metallic rigid PVC concealed conduit 20mm dia or higher with all PVC conduit accessories with suitable size of sunk type pressed steel terminal box concealed in wall, with PVC laminated sheet top cover 3mm thick with earth continuity conductor of size 1.5 sqmm single core copper conductor multistranded cable connected to common earth dolly for the following complete all as specified and directed :- Make of wire: KEI/HPL/Havells, Make of Conduit: Anchor/National/Bajaj Plast

One light point/bell point controlled by one, one-way 5 Amps

One ceiling fan/Exhaust fan point controlled by one, one-way 5 Amps

One 3/5 pin 5 Amps socket outlet on same board with other switch

One 3/5 Pin 5 Amps socket outlet on independent board

One light point controlled by two, two-way, 5 Amp switches

All as per item No 5.00 here-in-before but 2.5sqmm single core multi stranded copper conductor PVC insulated unsheathed (FRLS) cable 1100 volts incuding 1.5sqmm stranded copper conductor (FRLS) PVC insulated greeen in colour as continous earth conductor connected to common earth and earth dolly with all accessories one 5 pin 15 Amp socket on independent board complete all as specified and directed.

M & L for point wiring with 1.5 sqmm single core multi stranded copper conductor PVC insulated unsheathed (FRLS) cable 1100 volts grade fixed on & including PVC casing capping with suitable size of anodised switch box fixed to the surfaces of wall/roof /ceiling with PVC sleeves/dash fasteners and cadmium plated screws as per IS for mounting of switches, sockets, fan regulators etc with 3mm thick ISI marked plastic laminated sheet with earth continuity conductor of size 1.5 sqmm single core copper conductor multistranded cable (FRLS) connected to common earth dolly for the following complete all as specified and directed :- Make of wire: KEI/HPL/Havells, Make of Conduit: Anchor/National/Bajaj Plast

One light point/bell point controlled by one, one-way 5 Amps

One ceiling fan/Exhaust fan point controlled by one, one-way 5 Amps

One 3/5 pin 5 Amps socket outlet on same board with other switch

One 3/5 Pin 5 Amps socket outlet on independent board

All as per item No 7.00 here-in-before but 2.5sqmm single core multi stranded copper conductor PVC insulated unsheathed (FRLS) cable 1100 volts incuding 2.5sqmm stranded copper conductor (FRLS) PVC insulated greeen in colour as continous earth conductor connected to common earth and earth dolly with all accessories one 5 pin 15 Amp socket on independent board complete all as specified and directed.

M & L for point wiring with 1.5 sqmm single core multi stranded copper conductor PVC insulated unsheathed (FRLS) cable 1100 volts grade drawn through and including non metallic rigid PVC concealed conduit 20mm dia or higher with all PVC conduit accessories with suitable size of sunk type pressed steel terminal box concealed in wall & modular white cover plate with frame of suitable modules as per site requirement for mounting modular fixtures with earth continuity conductor of size 1.5 sqmm single core copper conductor multistranded cable connected to common earth dolly for the following complete all as specified and directed :- Make of wire: KEI/HPL/Havells, Make of Conduit: Anchor/National/Bajaj Plast

One light point/bell point controlled by one, one-way 5 Amps

One ceiling fan/Exhaust fan point controlled by one, one-way 5 Amps

One 3/5 pin 5 Amps socket outlet on same board with other switch

One 3/5 Pin 5 Amps socket outlet on independent board

One light point controlled by two, two-way, 5 Amp switches

All as per item No 9.00 here-in-before but 2.5sqmm single core multi stranded copper conductor PVC insulated unsheathed (FRLS) cable 1100 volts incuding 2.5sqmm stranded copper conductor (FRLS) PVC insulated greeen in colour as continous earth conductor connected to common earth and earth dolly with all accessories one 5 pin 15 Amp socket on independent board complete all as specified and directed.

S&F switch piano type, flush button, single pole, one way, 5 Amps complete all as specified and directed. Make : Panasonic Anchor / Cona - / Havells Reo

S&F switch piano flush type, 5/6 Amp, 240 volt, single pole, two way switch complete all as specified and directed. Make : Panasonic Anchor / Cona - / Havells Reo

S&F switch piano type, flush button, single pole, one way, 15 Amps complete all as specified and directed. Make : Panasonic Anchor / Cona - / Havells Reo

S&F switch bell push, flush type, 5 Amp, complete all as specified and directed. Make : Panasonic Anchor / Cona - / Havells Reo

S&F socket outlet 5 Amps, 5 pin, flush type, complete all as specified and directed. Make : Panasonic Anchor / Cona - / Havells Reo

S&F socket outlet 15 Amps, 2 in 1 , multipurpose 3/5 pin, flush type, complete all as specified and directed. Make : Panasonic Anchor / Standard / Havells Reo

S & F stepped type (switch type) electronic ceiling fan regulator, flush type, AC 230 volts complete all as specified and directed. Make : Panasonic Anchor / Standard / Havells Reo

S&F modular switch, one way, 6/10 Amps, 1 module complete all as specified and directed. Make: Havells/ Legrand / L&T

S&F modular switch, one way, 16 Amps, 1 module complete all as specified and directed. Make: Havells/ Legrand / L&T

S&F modular switch, two way, 6 Amps, 1 module complete all as specified and directed. Make: Havells/ Legrand / L&T

S&F modular bell push, 6 Amp, 1 module complete all as specified and directed. Make: Havells/ Legrand / L&T

S&F modular socket outlet 6 Amps, 2/3 pin combined, 2 module complete all as specified and directed. Make: Havells/ Legrand / L&T

S&F modular socket outlet 6 Amps/16 Amp, 2/3 pin combined, 2 module complete all as specified and directed. Make: Havells/ Legrand / L&T

S & F modular stepped type electronic ceiling fan regulator, AC 230 volts, 2 modules complete all as specified and directed. Make: Havells/ Legrand / L&T

S&F ceiling rose, surface bakelite 65 x 17.5mm, three terminal complete all as specified and directed. Make : Panasonic Anchor / Cona - / Havells Reo

S&F electric bell ding dong type AC 230 volt complete all as specified and directed. Make : Panasonic Anchor / Cona - / Havells Reo

S&F lamp holder PVC/polycarbonate type with back plate suitable for batten complete all as specified and directed. Make : Panasonic Anchor / Cona - / Havells Reo

S&F in repair LED tube light fitting in acrylic linear tube (1x 18 watt),230V for single LED tube light including 1 x 18 W LED retrofit bar professional CW 6500 K cover channel, bipin holders,LED power driver, connector block, etc complete with all accessories internally prewired and including connecting up with three core flexible copper conductor cable with suitable size for connection of fitting from ceiling rose complete all as specified and directed. Make:Crompton Cat part No for batten DSGLT8-14, for tube rod LT8-20-865-2, Havells Cat part No for batten STREAKT8UPTO1X22WSSBSWH, for tube rod PHOTONULTRAE2.01213T8SSTL20WLED865SPC, or equivalent in Philips.

S & F wall mounted decorative luminaire fitting suitable for & including LED lamp B-22 base 9 watt complete all as specified and directed. Make: Havells , Model- LHFOECE1TZ1O014, HSN Code: 9405 or equivalent model of Mepro/Philips

Fixing only light fittings any type including connecting up with three core twisted flexible copper conductor cable of suitable size complete all as specified and directed. NOTE: Serviceable light fittings retrieved vide Sl item No 1 & 4 shall be reused. Make: Havells/Crompton/Philips

S & F in repair LED mirror light fitting, suitable for & including 1 x 10 watt, 600mm LED luminaire, attractive wall/ ceiling mounted type with metallic channel and white reflector, suitable for mirror fittings with complete with all accessories pre-wired and including connecting up with three core twisted flexible copper conductor cable of suitable size complete all as specified and directed. Make: Havells/Crompton/Philips

S & F in repair LED light fittings, suitable for & including 1x10 watt bulk head luminaries with connector block etc complete with all accessories and including connecting up with three core twisted flexible copper conductor cable with suitable size of 230V, 50 Hz complete all as specified and directed. Make: Havells/Crompton/Philips

S&F in repair testing and commissioning energy saving street light luminaire 35/40 watt LED , pressure die cast housing with epoxy powder coated with colour finish and prismatic poly carbonate coverlic cover complete, IP 66 protection incl connecting with three core copper flexible wire from ceiling rose to connector of light fitting complete all as specified and directed by Engr-in-Charge. Make: Crompton Cat Part No TRP-400-35-57-SL-LM-NSR, Havells Cat Part No ENDCITYLITPLAT+SL35WLED757SASYBOPCWOSPD or equivalent in Philips.

Supply and fixing in repair recess mounted LED 12 watt Slim edge lit panel minimum lumen output 120 lumens/Watt, total system lumens 1440, compact, aluminum die cast housing, round fixture with opal diffuser and separate electronic driver complete all as specified and directed by Engr-in-Charge. Make Crompton Cat No LSCRM-12W-CDL, Havells Cat Part No INTEGRANEODLR12WLED857S or equivalent in Philips.

Supply and fixing in repair recess mounted 2' x 2' LED luminarie 36 watt, cool day/warm white light with white powder coated CRCA housing with LED driver, lumen efficacy >100 Lm/w complete all as specified and directed. Make Crompton cat part no. TCR-145-36-65-SL-NWH, Philips Cat Part No RC383B LED 36S-4000 PSU OD WH PIR, or equivalent Havellls.

S&F in repair recess mounted 2' x 2' LED luminarie 36 watt, cool day/warm white light with white powder coated CRCA housing with LED driver, efficiencey >120 Lm/W, complete all as specified and directed. Make Philips Cat Part No SM366C LED32-6500 PSU OD GR, Crompton Cat Part No. LCTLSNE-36-FO-CDL.

Supply and fixing in repair surface mounted LED downlight 18 watt round shaped, Slim surface mounted LED panel with Al.die cast body with minimum system lumen efficacy >120 lumen/watt & total system lumens >2150 with premium diffuser to ensure glare free & even light distribution complete all as specified and directed. Make Crompton cat part no. LCDSPLN-R-18-CDL Havells, Model -Trim Cosmo Surface Round, Cat Part No LHEAAHP7IL1W018, or equivalent model of Philips

S & F in repair high efficiency round highbay with circular form factor and available in both Narrow & wide beam optics of IP lens/PC cover and luminaire in pressure die cast housing for industrial application 150 watt, system lumen efficacy >150 Lm/W Total System lumens 22500, 5700K IP66 protection including LED Potted driver complete all as specified and directed. Make Crompton cat part no. CIP-326-150-57-60D-HL5-LM-NSG or equivalent in Havells, Philips.

S&F street light brackets made out of GI tubing, light grade, 32 mm bore 1200mm long, bent to shape at 120 degree, fixed on wall by providing MS clamp made up of flat iron 40 x 5 mm including bolts, nuts and washer of suitable size incuding painting the bracket & clamp with two coats of aluminium paint over a coat of primer complete all as specified and directed.

M & L for submain wiring with two single core PVC insulated, unsheathed, FRLS, 1100 volts grade 6 Sqmm multi stranded copper conductor cable drawn through and including 25 mm dia PVC non metallic rigid conduits & conduits accessories, concealed in wall/ roof/ ceiling one run of green colour earth continuity conductor with 6 Sqmm multi stranded copper conductor cable complete all as specified and directed. Note :- Two run of single core cable, one run of earth continuity conductor & conduit with conduit accessories shall be measured as one unit length. Make of wire: KEI/HPL/Havells, Conduit: Anchor/National/Bajaj Plast

M & L for submain wiring with two single core PVC insulated, unsheathed, FRLS, 1100 volts grade 6 Sqmm multi stranded copper conductor cable drawn through existing concealed conduit one run of green colour earth continuity conductor with 6 Sqmm multi stranded copper conductor cable complete all as specified and directed. Note :- Two run of single core cable & one run of earth continuity conductor shall be measured as one unit length. Make of wire: KEI/HPL/Havells,

S&F MCB single pole, 240 volt, 10KA, 6 to 32 Amps conforming to IS 8828 of 1996 curve 'C' complete all as specified & directed. Make : Havells/ L&T/ V Guard

S&F MCB single pole and neutral, 240 volt, 10 KA, 10 to 40 Amps conforming to IS 8828 of 1996 curve 'C' complete all as specified & directed. Make : Havells/ L&T/ V Guard

S&F MCB single pole and neutral, 240 volt, 10 KA, 63 Amps conforming to IS 8828 of 1996 curve 'C' complete all as specified & directed. Make : Havells/ L&T/ V Guard

S & F MCB, TPN, 63 Amp, 415 Volts with breaking capacity 10 KA, ISI marked, curve 'C' complete all specified and directed. Make :Havells/ L&T/ V Guard

S & F MCB, TPN, 100 Amp, 415 Volts with breaking capacity 10 KA, ISI marked, curve 'C' complete all specified and directed. Make :Havells/ L&T/ V Guard

S&F MCB distribution board single pole & neutral with 200 Amps rated bus bar, double door, IP-43, DB's made out of CRCA sheet steel enclosure, recessed type, factory made powder coated, 8 way, 240 volts suitable for housing MCB's and isolator's complete in all fixing material/accessories etc complete all as specified and directed. Note : MCB DB and MCB will be of same make. Make :- Havells/ L&T/ V Guard

S&F MCB distribution board single pole & neutral with 200 Amps rated bus bar, double door, IP-43, DB's made out of CRCA sheet steel enclosure, recessed type, factory made powder coated, 12 way, 240 volts suitable for housing MCB's and isolator's complete in all fixing material/accessories etc complete all as specified and directed. Note : MCB DB and MCB will be of same make. Make :- Havells/ L&T/ V Guard

S&F MCB distribution board single pole & neutral with 200 Amps rated bus bar, double door, IP-43, DB's made out of CRCA sheet steel enclosure, recessed type, factory made powder coated, 4 way, 240 volts suitable for housing MCB's and isolator's complete in all fixing material/accessories etc complete all as specified and directed. Note : MCB DB and MCB will be of same make. Make :- Havells/ L&T/ V Guard

S&F of MCB distribution board triple pole & neutral IP-43 double door metal, 4 way ,415 volt made out of CRCA sheet steel , factory made powder coated with insulated bus bars , shrouded neutral bars, earth bars , made out of sheet steel enclosure, recessed type, factory made powder coated suitable for housing MCB's complete all as specified and directed. MAKE: Havells/ L&T/ V Guard Note: MCB DB and MCB SP/SPN will be of same make.

M & L for earthing complete with GI earth plate electrode 60 cm x 60 cm x 6.00mm thick, buried directly in ground (earth pit not less than 2.25mtr deep below normal ground level) with top edge of the plate not less than 1.5 mtrs below normal ground level connected to GI lead wire 4.00mm dia by means of bolts, nuts, check nuts and washers of galvanized iron or steel all as shown in electric plate No 5 of SSR Part-I connected to continuous earth wire on main switch board all as specified or indicated and testing on completion including provision of earth wire protection by 15mm dia medium grade GI pipe and watering pipe shall be 20mm bore, medium grade including excavation & earth work in any type of soil & disposal of sil chamber in mix 1:3:6 type C-1 with 40mm thick RCC 1:2:4 type B-1 cover, reinforced with 8mm TMT bars 100mm C/C both ways with handle made out of 8mm dia bars, watering arrangement with funnel and wire mesh completed all as specified and directed. Note : Earth wire will be measured after 7.5mtr from the earth strip or earth testing terminal block whichever is lesser under relevant item.

S&F in repair single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole 20 Amp MCB SP `C' series for geyser & AC complete all as specified and directed. Make: Havells/Standard/Anchor.

M/S SHIVA TRADERS

kirtiman traders

PD GUPTA AND COMPANY

Nvimal Engineers and Contractor

M/s SUNIL ENTERPRISES

VIPRABANDHU CONSTRUCTIONS

PARADISE INFRA POWER COMPANY