Supply, erection and commissioning of 02 Nos. 10 Cs. Axial/Mixed flow VT Pump and 02 No. 05 Cs. Axial / mixed flow VT Pumps with 02 No. Motors of capacity 50 HP, 02 no. Motors of 30 HP and 1 No. LTDB Panel of 400 Amp with other allied material at new

Amount

Supply, Erection & Commissioning of 10 C/s axial/ Mix Flow water lubricated vertical Pumps of 10 Cs. Discharge at 1440 RPM having lift of approx 12 feet along with Y body, including MS Bend including flange welding, Syphon Breaker valve with Mouth piece & SS nut & Bolts etc complete in all respect as per site requirement with epoxy coating & as per approved specification of the department

Supply, Erection & Commissioning of solid shaft Motor of capacity 50 HP, 1440 RPM, 3phase, 415 Volt +- 10% with efficiency class IE2 suitable for fitment with 10 Cs. VT axial/ mix flow pump type vertical flange mounted as per approved specifications of the department.

Supply, Erection & Commissioning of 5 C/s axial/ Mix flow water lubricated Vertical Pumps of 5 Cs. Discharge at 1440 RPM having lift of approx 12 feet along with Y body, including MS Bend including flange welding, Syphon Breaker valve with Mouth piece & SS Nut & Bolts etc complete in all respect as per site requirement with epoxy coating & as per approved specifications of the department

Supply, Erection & Commissioning of solid shaft Motor of capacity 30 HP, 1440 RPM, 3 Phase, 415 Volt +- 10% with efficiency class IE2 suitable with fitment with 5 Cs. V.T. axial/ mix flow pump type vertical flange mounted as per approved specification of the department

Supply, Erection & Commissioning of LTDB of 400 Amp. Capacity including all accessories as one incomer of MCCB (400 Amp) with 63 amp MCB for lightning loads and 04 No. outgoing MCCB with 4 No. fully automating Star Delta Starter stable for operation of 02 No. motor of capacity of 50 HP and 02 No. motor of capacity of 30 HP. including all accessories with stable contactor rating with control transformer for control supply, indicator, relay, digital meter, push button, bus bars etc. outgoing indicator, having MPR and all types of protection i.e. UV/ OV, over current, phase imbalance/ phase reversal protection, looked rotor, dry run etc capacitor bank, separate relay for single phase protection etc complete in all respect with a stand of MS channel having stable operating height above the kacha/ pucca floor with a stand of MS channel (I/C stable size PVC 3 phase submersible CU wire from starter to motors) as per site requirement as per approved specification of the department.

Providing complete double side chemical earthing or plate earthing with 2 earth pits on both sides of Sump well by boring & lowering 1.5" GI pipe, filling boring with charcoal, copper strips, salt & fixing base plate of chemical earthing and connecting this main earthing through copper strip/ wire upto motor and panel conforming IS-3043 & as per site requirement

Providing and laying LT Armored PVC aluminum cable of size 185 sq. mm, 3 1/2 core conforming to IS 7098-19852 as per approved make

Supply, Erection & Commissioning of MS delivery pipe 341.4 mm inner dia both and flanged (in>=6 mtr pieces) as per approved specification and make (including SS nut & bolt, rubber sheet 1/8" & other fitment accessory required)

Supply, Erection & Commissioning of MS delivery pipe 258.9 mm inner dia both and flanged (in>=6 mtr pieces) as per approved specification and make (including SS nut & bolt, rubber sheet 1/8" & other fitment accessory required)

Bidder Name

Amount

AADI SHAKTI ENTERPRISES (GSTN-06BIIPS2027Q1ZR) BID ID -1018725

Avon Engineering Company (GSTN-06BBOPK7279R1ZI) BID ID -1018881

AADI SHAKTI ENTERPRISES

AADI SHAKTI ENTERPRISES