Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹33.4 LAccepted-AOC | L1 | Accepted-AOC L1 | |
| 2 | L2₹34.1 L+₹33,488 (0.99%)Rejected-AOC | L2 | Rejected-AOC L2 | |
| 3 | L3₹38.1 L+₹4.2 L (12.6%)Rejected-AOC | L3 | Rejected-AOC L3 | |
| 4 | L4₹40.7 L+₹6.9 L (20.3%)Rejected-AOC | L4 | Rejected-AOC L4 | |
| 5 | L5₹41.8 L+₹8.0 L (23.6%)Rejected-AOC H NO 243 VARADARAJ NAGAR VIDYARANYAPURA POST BANGALORE 560 097 | BANGALORE | BANGALORE | KARNATAKA | 560097 | L5 | Rejected-AOC L5 |
Tender Value
₹35 L
EMD Value
₹70,000
Closing Date
17 Jul 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE (AF) Yelahanka
GE (AF) Yelahanka BANGALORE-63
PETTY REPAIRS LIKE PLASTERING, CHAJJA REPAIRS, RAIN WATER PIPE AND CONNECTEDMISC WORKS IN DOMESTIA AREA AT AF STN YELAHANKA
2023_MES_602573_2
8177/E8
Open Tender
Civil Works
Item Rate
330 days
GE (AF) Yelahanka
AS PER NIT
9 documents required · 9 mandatory
₹500
GE (AF) Yelahanka
₹70,000
Yes
10 Aug 2023
26 Jun 2023
19 Jul 2023
26 Jun 2023
17 Jul 2023
3 Jul 2023
Amount
Attending day to day complaints to carry out petty repairs related to water supply & plumbing work such as leakage of bib cock / pillar cock / stop cock angle valve, wall mixer, shower rose, health faucet/Jet spray, including removal of air lock/blockage of water in GI tubing of any description changing the washers, clearing of air lock in the pipe, leakage of low level or high level flushing cistern by adjusting the float valve including removal and replacement of rubber washer in PVC siphons, adjusting the float valve of over head tanks, leakage of PVC bends/galvanised iron pipes etc., All T&P such as die set, washers of all size etc including necessary form work and scaffolding upto second floor, safety measures to make functional and leak proof, all petty materials like taflon tape, M-seal, screws, nails, cap etc. are deemed to be included in the unit rate quoted by the contractor on all working days from 0900 hrs to 1700 hours complete all as directed.
Attending and retify day to day complaints related to joinery work such as repairs to door, windows, cupboard, kitchen shelves, pelmet boxes, curtain rod/bracket, easing of doors windows etc as ordered/required on all working days (Except Sunday & gazette holidays) 0900 hrs to 1700 hrs complete all as specified & directed. Note for Item No. 1 to 2:- (i) Contractor or his supervisor/site Engineer will report daily at 0900 hrs at complaint cell for collection of complaints from the concerned JE in-charge, in case after checking & attending the defects, if it is not possible to rectify the defects within 08 hrs, the facts shall be brought to the notice of JE than after to Engineer in charge by the contractor/ his rep immediately. If Engineer-in-charge is satisfied with contractor's view, no recovery will be made on this account. However complaints related to sewage line blockage /pipe replacement etc whatever is applicable shall be attended on same day whether it is "Sunday" or "Gazetted Holidays" and nothing extra shall be payable to contractor on this account. (ii) Contractor or his supervisor / site engineer will report daily at 0900 hrs at complaint cell for noting of day to day complaints in complaints register, issue of complaints slip to tradesmen and enter after completion in complaint register as instructed by JE,s. In case of absense of contractor rep for noting complaints, a penalty of Rs 500.00 per day will be deducted from the contractor bill. (iii) The complaint shall be attended & defects shall be rectified within 08 hrs i.e from 0900 hrs to 1700 hrs excluding Sunday & gazetted holiday, commencing from date and time of notifying the complaint slip failing which a Penalty @ Rs.500/- Per complaint per day (08 hrs) shall be levied upon / imposed on the contractor and necessary recovery shall be made from his dues on this account. (iv) The above all aspect shall be deemed to be included in the quoted rate of the respective item.
M&L for glazed ceramic colour designer concept glazed ceramic tiles in patches n exc 1 sqm each & matching with existing tile 200x300x7mm size as in walls set and jointed in neat cement slurry over and including 10mm thick backing coat in cement mortar (1:3) and pointed in coloured cement to match for work on vertical surface such as skirting dado etc incl dismantling of skirting/ dado (terrezo/PCC/tiles of any description) incl cement mortar bedding but not backing) incl dismantling and removing the rubbish from the complex complete all as specified & as directed by Engr-in-Charge.
M&L for glazed ceramic colour designer concept glazed ceramic tiles in patches n exc 1 sqm each & matching with existing tile 350x250x7mm /450x350x7mmsize as in walls set and jointed in neat cement slurry over and including 10mm thick backing coat in cement mortar (1:3) and pointed in coloured cement to match for work on vertical surface such as skirting dado etc incl dismantling of skirting/ dado (terrezo/PCC/tiles of any description) incl cement mortar bedding but not backing) incl dismantling and removing the rubbish from the complex complete all as specified & as directed by Engr-in-Charge.
M&L for non skid coloured ceramic tiles tiles 400x400x7mm of size in patches n exc 1 sqm each & matching with existing tile 7 to 8mm thick (squar / rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm in floors etc set and jointed in neat cement slurry and jointed in white/coloured cement to match over and including 15 mm thick backing coat in cement mortar in (1:6), including demolition of floor (terrezo/ PCC/Tiles of any description) incl cement mortar bedding but not backing) incl dismantling and removing the rubbish from the complex complete all as specified and as directed by Engr-in-charge.
M&L for non skid coloured ceramic tiles tiles 300x300x7mm of size in patches n exc 1 sqm each & matching with existing tile 7 to 8mm thick (squar / rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm in floors etc set and jointed in neat cement slurry and jointed in white/coloured cement to match over and including 15 mm thick backing coat in cement mortar in (1:6), including demolition of floor (terrezo/ PCC/Tiles of any description) incl cement mortar bedding but not backing) incl dismantling and removing the rubbish from the complex complete all as specified and as directed by Engr-in-charge.
M&L in replacement of brass face spindle of existing 15mm dia bore bib cock, stop cock, angle valve, C P Pillar cock, Wash basin mixture and valve mixture of any description fixed in repairs complete all as specified and directed by Engr-in-Charge.(Suitable for make Jagur,Cera,Sieko and Zollota etc)
S&F in repairs CP health fauccet of Cera make including neccessary holding arrangements with screws etc all as specified and directed by the Engineer -in -charge.Make : Cera/Jaguar/Ess Ess
Dismantling of old Ceiling boards (Fibre,pulp,insulation,etc) or insulation boards /slabs blankets,including cover fillets and frame work.
S&F of Armstrong Board 12mm thick in ceiling fixed with screws all complete as per manufacturer’s instructions .
S&F Soap Dish Holder, in repairs, all as spd and directed by Engr-in-Charge. Make :Make : Cera/Jaguar/Ess Ess
S&F Paper holder with Flap Recessed Type (Stainless steel), in repairs, all as spd and directed by Engr-in-Charge. Make : Make : Cera/Jaguar/Ess Ess
S&F Corner Glass shelf with bracket, in repairs, all as spd and directed by Engr-in-Charge.Make : Cera/Jaguar/Ess Ess
S&F in repairs Decorative wooden finished curtain rod mild steel chromium plated of 20 mm dia all as directed and specified by Engr in charge.
S&F decorative wooden finished type chromium plated double brackets supports for holding curtain rods and corners to be fixed to ends of curtain with screws complete.
S&F in repair 15 mm dia bib taps (fancy type), Chromium plated cast copper alloy with with crutch or butter fly handle screwed down, screwed for iron pipe or for brass ferrule complete with check nut 15mm bore complete all as specified and directed by Engr-in-Charge.. Make : Cera/Jaguar/Ess Ess
S&F in repair bib tap of PTMT any colour 15mm dia (Prayag or equivalent ) in repairs all as specified.
S&F in repair stop valve of PTMT any colour screwed for iron pipe and fixed 15mm bore (Prayag or equivalent ) all as specified.
S&F in repair gun metal globe gate valve 20 mm bore.
S&F in repair Towel Rack with lower hanger (stainless steel), fixed in repairs, complete all as specified and directed. Make : Make : Cera/Jaguar/Ess Ess
S&F brass chromium plated bottle trap 32mm bore for wash hand basin with inlet and outlet and screwed for pipe or all as specified, fixed as in repairs complete all as specified and directed by Engr-in-Charge.
M&L for replacement of existing chromium plated grating of size 125mm dia (with hole or without hole) complete for Nahani/Floor traps and fixed as in repairs complete all as specified & directed by Engr-in-charge.
S&F in repair 70 mm dia fancy type shower roses brass chromium plated with CP arms for 15mm bore GI pipe with 235 mm long shower arm complete all as specified & directed by Engr-in-Charge.Cera Model F- 702106
S&F in repair 15 mm dia two way bib taps (fancy type), cast copper alloy with with crutch or butter fly handle screwed down, screwed for iron pipe or for brass ferrule complete with check nut 15mm bore complete all as specified and directed by Engr-in-Charge.Make : Cera/Jaguar/Ess Ess
S&F Wall mixer non telephonic Shower arrangement with connecting legs & Wall flanges, fixed in repairs. Make -Make : Cera/Jaguar/Ess Ess
S&F in repair 15 mm dia Pillar taps (fancy type), cast copper alloy with capstan heads, chromium plated,handle screwed down high pressure, with or without lettered HOt or cold with long screwed shanks and fly nuts ,screwewd for crewed for iron pipe and fixed complete with check nut 15mm bore complete all as specified and directed by Engr-in-Charge.Make : Cera/Jaguar/Ess Ess
S&F in repairs Angle cock with wall flange 15 mm dia Fancy type Make : Cera/Jaguar/Ess Ess
Supply and fix in repairs stop valves, chromium plated fancy type screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions and fixed 15mm bore dia (MAKE : SEICO/ESSESS/CERA)
S&F in repairs PVC waste pipe 32/40 mm dia for urinal/ WHB/Sink
S&F as in repair 15mm dia PVC connection 600 mm long all as specified.
Removal of air lock/blockage of water in G I Tubing 15,20,25mm bore including taking down (if required) cleaning the pipe or fitting etc and refixing the same in position complete including new GI fitting if required for refixing complete all as specified and directed by Engr-in-Charge.
S&F in repair Sink with drainage board made of stain less steel 1mm thick kitchen or laboratories with plugs, washer and wastes, including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915x 460x bowl size 410x330x160mm complete all as approved by Engr-in-Charge. (make : Nirali/ Blue star or equivalent)
S&F sinks made of stainless steel lmm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm® omplete all as approved by Engr-in-Charge. (make : Nirali/ Blue star or equivalent)
S& F in repairs PVC (SWR) P trap 110/110mm bore, all as specified.
S&F in repairs PVC (SWR) S trap 110/110mm bore, all as specified.
Demolition and breaking up drain pipes ( salt glazed ware , AC, PVC or reinforced conc ) set in cement mortar of internal dia 75-110mm incl any earth work and demolition of PCC, complete all as specified.
S&F in repairs PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wall (110 mm bore) including flat iron claim for proper fixing complete all as specified & directed by Engr-in-charge.
S&F in repair PVC(SWR) bends 110mm dia complete all as specified & directed by Engr-in-Charge.
S&F in repairs PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wall (75 mm bore) including flat iron claim for proper fixing complete all as specified & directed by Engr-in-charge.
S&F in repair PVC(SWR) bends 75mm dia complete all as specified & directed by Engr-in-Charge.
S&F in repairs Shelf of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats Minimum weight 300gms) in repair.
S&Fin repair High density polyethylene pipes 50 mm bore of pressure ratings 6 kgf/cm2 fixed complete to walls,floors,ceiling etc.
M&L for 75mm dia of outlet PVC Nahani trap with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) complete all as specified and directed by Engr-in-Charge.
S&F in repairs vitreous China squatting pan 'orrisa' pattern white colour of size 580x440mm with integral foot rests including provision of lime concrete complete all as specified & directed by Engr-in-charge .Make : Cera/Jaguar/Ess Ess
S&F in repair for vitreous china wash basin white flat back size 550x400 including cutting for and pinning in ends of brackets including of fixing of 32mm low density polylethyne pipes (LDPE)of pressure rating 6kg/cm2,coupling, PVC connection with 15 mm PTMT cheknuts, brackets all complete as directed by Engr in Charg,Make : Cera/Jaguar/Ess Ess
S&F in repairs 10ltr capacity PVC valve less syphonic action type flushing cistern low level white with inlet ball valve ,float & handle including brackets complete all as specified and directed by Engr-in-ChargeMake : Cera/Jaguar/Ess Ess
S&F in repairs rotational moulded polyethylene water storage tank (cylindrical vertical with closed top) hoisted and jointed in position all as specified in SSR Part-I (500 ltr capacity) including disconnecting existing tank and providing all necessary fittings for connecting with pipe line, threaded type lockable cover complete all as specified and directed by Engr-in-Charge.
S&F in repairs rotational moulded polyethylene water storage tank (cylindrical vertical with closed top) hoisted and jointed in position all as specified in SSR Part-I (1000 ltr capacity) including disconnecting existing tank and providing all necessary fittings for connecting with pipe line, threaded type cover complete all as specified and directed by Engr-in-Charge. Make- Sintex
S&F in repair wash down water closet (pedestal pattern) of any colour including fixing of bolts complete all as specified and directed by Engr-in-Charge.Make : Cera/Jaguar/Ess Ess
S&F in repairs plastic EWC seat cover of white colour for pedestal pan , closed pattern with flat bottom & cover including MS chromium plated ,alum hinging devices complete all as specified and directed by Engr-in-Charge.Make : Cera/Jaguar/Ess Ess
Taking down and re-fixing of old steel tubing connection in new or old position (wall etc) including cleaning for re-fixing bore of pipe 15mm dia complete all as specified and directed by Engr-in-Charge. Note: - New GI fittings such as elbow, socket, Tee, Union, Nipple are included in rates if required for re-fixing of pipe.
All as per srl item No 52 above 20mm bore of pipe.
S & F in repair stainless steel wire cloth, 0.45 mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and as directed by the Engineer-in-Charge
Taking down door chowkats or frames not exceeding 1.5 sqm with shutters (without taking off shutters from the frame) of any description
All as per item No 55 above but exceeding 1.5 sqm but not exceeding 4 sqm
Taking down shutters of any description exc 1sqm and n.exc 2sqm each
S&F 2nd class hard wood (SAL) plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered put together with glue, pinned at joints complete all as specified and directed.
S&F for 35mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides all as specified and directed.
S&F second class hard wood glazed and skeleton shutter for doors open rebated and prepared to receive glass, gauge etc divided into squares with plain chamfered or mitered and rebated sash bars any number, edges or framing, plain chamfered or rounded fitted with beads for securing glass gauge size of members of shutters as specified in SSR part I of 35 mm thick all as specified and as directed by Engineer-in-Charge.
S&F Continuous(piano) hinges,mild steel,bright finish of electrogalvanised 30 mm width of flap.
M&L Prelaminated particle board,19 mm thick interior grade,prelaminated one side with decorative choice lamination & other side balancing white lamination,fixed with screws to timber frame work.
M&L 12mm thick block boards grade 2 quality, interior grade decorative type with decovative face veneer on one face, fixed with screws to timber frame work all as specified and as directed fixed in repairs
M&L preparing new or previously untreated wooden surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer.
S&F Solid PVC door frame of size 50mm x47mm made out of 5mm plain colour PVC sheet reinforced with 19mmx19mm MS square tube. EPDM rubber gasket weather seal to be provided throughout the frame. The profile shall be mitre cut at two corners and joined by inserting 2mm of 150mm long brackets of 15x15mm MS square tube inside the 19mmx19mm MS square tube and suitably screwed. The door frame shall be fixed to the wall using 65x100mm long cdium plated screws through the frame by using PVC fasterness. A minimum of 06 Nos screws to be provided for each frame supplying & fixing in opening as per specified and directed Note : Cuting holes, providing cement concrete for holdfast finishing all disturbed surfaces (CM 1:4) around door frame etc are deamed in this item
S&F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for Top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for styles and plain colour PVC sheets for top rail, lack rail & bottom rail on either side & as far insert for top rail & bottom rail ; paneling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beating and joined together with solvent cement supplied and fixing in the frame at site including all fixture & fittings etc all as specified and as directed.
S&F in repairs 100 mm Stainless steel hinges of any colour all as specified & directed by Engr-in-chargeas fixed in repairs.
S&F in repairs 75 mm Stainless steel hinges of any colour all as specified & directed by Engr-in-chargeas fixed in repairs.
S&F for aluminium handle 150mm cast type anodised.
S&F for aluminium anodised, barrel tower bolt 200mm of extruded section.
S&F aluminium alloy anodised, sliding door bolt 250 mm long with hasp, staple (bolt type) and fixing clips of sheets , cast or extracted section and fixing bolt and sliding bolts of extracted section.
Supply and fix floor door stopper of aluminium alloy body and tongue, anodised with hard drawn steel spring fixed in floor 150 mm size of cover plate.
S&F Butt hinges, medium weight, cold rolled, mild steel 100mm long (ISI marked), complete all as specified.
S/F in repairs Stainless steel barrel tower bolt 150mm of extruded sectionas fixed in repairs.
S/F in repairs Stainless steel barrel tower bolt 200mm of extruded sectionas fixed in repairs.
S/F in repairs Stainless steel handle 150mm all as specified and directed by the engineer -in -chargeas fixed in repairs.
S/F in repairs Stainless steel handle 100mm all as specified and directed by the engineer -in -chargeas fixed in repairs.
S&F in repair 150mm floor door stopper of Stainless steel body ,fixed in floor all as specified and directed by Engr-in-Charge.
S&F stainless steel , sliding door bolt 250 mm long with hasp, staple (bolt type) and fixing clips of sheets , and fixing bolt and sliding bolts of as fixed in repair.
S& F Stainless steel wire cloth. 0.36 mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples .
Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone concrete glazed with oil putty or fixed with beeds.
S&F sheet glass ordinary quality 4mm thick and glazing with oil putty in square n.exc 0.50 Sqm in each pane all as directed by Engineer-in-Charge
All as item 82 above but figured glass pin head type.
S&F sheet glass ordinary quality 4.8mm thick as in doors, showcase alum frame work & similar work with or without glass roller area exc 0.50 Sqm including neoprime gasket all as directed by Engineer-in-Charge
S&F as in repairs mild steel Mortise lock, vertical type, size100 mm four lever .
S&F in repairs ISI marked hydraulically regulated door closer designation no.03 universal type,suitable for door shutters of 851 to 1000 mm in width and weight betwwen 61 to 80 kg width upto 1.50 mm mtr and weight between 61 to 80 kg complete all as specified and directed by Engr-in-Charge..
S/F in repairs Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed complete all as specified and directed by Engr-in-charge
M&L for Easing of wooden window shutters/CB shutters (One unit shall comprising of one window/ CB/ Showcase/ irrespective of number of leaves) for properly closing/ opening tightening of hinges or changing the position of hinges adjustment of tower bolts sliding bolt etc complete all as specified & directed by Engr-in-charge.
All as per srl item No 88 above but door shutter.
Taking down cement plaster in patches on brick work, racking out joints, hacking for key scrubbing down with water etc complete and removing the spoin to a distance of n.exc 100m & depositing where directed all as specified & M&L for 15mm thick cement plaster in CM (1:4) on brick work/concrete surface finished even & smooth w/o using extra cement. the area of patches should not be more than 1.00Sqm.
M&L for repairing of 40mm thick flooring in patches with PCC (1:2:4) 20mm graded stone agg. & finished even & smooth w/o using extra cement. The area of patches should not be more than 2.00 sqm each. The rates include demolition of existing concrete complete all as specified and directed by Engr-in-Charge.
S&Fin repair 300 mm ordinary rat rail rod pattern springs incl roller and roller plate complete.
M&L for Repair/Easing of steel window shutter for properly closing/opening tightening of hinges by oiling, greasing or by replacing of new box type hinges including necessary cutting & welding complete all as specified and directed by Engr-in-Charge. Note:- one unit shall be comprising of two window Shutter up to 12m height.
Demolition of brick work built in cement mortar all as directed.
Taking down cement plaster from walls of any description all as specified and directed.
M&L for brick work with sub class 'B' bricks, straight of curved on plan exc 6M mean radius built in CM 1:6 complete all as specified & directed by Engr-in-charge.
M/L 15 mm thick cement plaster in CM (1:6) including finished even and smooth (without using extra lime or cement).
M&L 10mm thick cement plaster in CM 1:6 on brick work or concrete surfaces rendering is to be even & smooth without using extra cement on internal walls
M&L for applying two coats of distemper (OBD) including Preparation to the new surfaces of wall, all as specified and as directed
Preparation of newly plastered surfaces and applying two coats of cement base paint on walls incl priming surfaces with alkali resistant priming paint etc complete all as specified and directed.
M&L for Running welding in repairs on metal to be welded of thickness exc. 6mm but n.exc. 9mm including preparation of surface, etc complete all as specified and directed by Engr-in-charge.
S&F in repairs CP Towel rail including fiitings of neccessary screws etc complete all as specified and directed by the Engr-in-Charge.Make : Cera/Jaguar/Ess Ess
S&F in repairs CP Towel ring including fiitings of neccessary screws etc.complete all as specified and directed by the Engr-in-Charge, Make : Cera/Jaguar/Ess Ess
S&F in repairs Glass shelf including neccessary holding arrangements with screws etc all as specified and directed by the Engineer -in -charge.Make : Cera/Jaguar/Ess Ess
Taking up or down 20mm bore steel tubing and connections including cleaning for refixing or removal to store.
Taking up or down 25mm bore steel tubing and connections including cleaning for refixing or removal to store.
S&F CPVC pipes 20 mm SDR 11 & Plain VPVC SDR 11 on walls, ceiling orf laying including fitting in floors all as specified and as directed by Engr in Charge.
S&F CPVC pipes 25 mm SDR 11 & Plain VPVC SDR 11 on walls, ceiling orf laying including fitting in floors all as specified and as directed by Engr in Charge.
S&F in repairs for vitreous china Under Counter sunk Modular wash basin white flat back size 190X550X430mm including fixing of 32mm low density polylethyne pipes (LDPE)of pressure rating 6kg/cm2,coupling, directeded by Engr in Charge(Make: Jagua,/cera or equivalent as approved by GE)
S&F in repair PVC syphon kit for low level flushing cistern Make : Cera/Jaguar/Ess Ess
S&F PVC Cabinet mirror Make Prayag all as specified directed by engr in charge.
S&Fin repairs Basin mixer 15 mm dia Fancy type Make : Cera/Jaguar/Ess Ess
S&F in repairs swan neck Pillar cock CP 15 mm diaMake : Cera/Jaguar/Ess Ess
S&F in repair 15mm dia, stop valveconcealed type chromium plate fancy type with long shank and cup complete all as specified.Make : Cera/Jaguar/Ess Ess.
S&F in repair Stainless steel Plate Rack 0.75 Mtr x 0.78 Mtr . ( Make :NIRALI,Maharaja ,Nilkhant)
M & L for preparation of new steel surface of any description, not otherwise described, over 10cm width or girth, and applying two coats of synthetic enamel paint over a coat of red oxide.
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles and rubbish off the premises etc complete all as specified and directed.
M & L for Machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing & complete 15mm thick screed bed in CM 1:4 over 25mm thick PCC 1:2:4 type B0 (using 12.50mm graded crushed stone agg, all as spd & directed.
M&L Screed bed or bedding layer of mortar 20 mm thick for laying floor tiles in cement mortar 1:6 finished even and rough.
M&L Granite( of any size) work in cooking plate form and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite 20 mm thickness.
M&L Light shade Virified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15 mm thick screed bed in CM 1:6 all as specified and directed.
M & L Non skid coloured ceramic tiles 7 to 8 mm thick matt finish(square/ rectangular) area of ech tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match with tile incl screedd bed 15 mm thick in CM (1:6) complete all as directed and specified.
M&L for repair of of aluminium doors including taking out door shutters and changing of certain parts if required like pilots,hinges,rubber beadings etc as required and re-fixing in same position and size of doors n.exc 2 sqm each.
All as per item no 123 but for windows.
S&F Vitreous china urinals, bowl type of size 465x355x265mm white (minimum) with grating and union for discharge pipe (excluding flushing cistern and waste pipe),complete including poviding and fixing plugs, bedding urinal against wall in cement mortar 1:2 securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement, brackets, flush pipe, waste pipe grating and union for discharge pipe fixed in repair, complete all as specified. Make Cera, jaquar or equivalent
S&F in repairs Single Piece EWC with cistern, soft close seat cover and twin flushing fittings of size wash down water closet (pedestal pattern) of any colour including fixing of bolts complete all as specified and directed by Engr-in-Charge.Make : Cera/Jaguar/Ess Ess
S&F for PTMT Waste cupling 40mm dia complete all as specified
S&F for Waste cupling for sink of 125mm dia complete all as specified
SRI AYYAPPA ENTERPRISES
M/s. ARK BUILDERS
SRINIVASA ENTERPRISES
chowdeshwariconstructionco
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .