Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹53.8 LAccepted-AOC 65 RANJEET NAGAR NEAR SAI HOSPITAL AMBALA CANTT 133001 | AMBALA CANTT | AMBALA | HARYANA | 133001 | L1 | Accepted-AOC Lowest and reasonable bidder | |
| 2 | L2₹54.3 L+₹55,350 (1.03%)Rejected-Finance | L2 | Rejected-Finance Not lowest | |
| 3 | L3₹58.7 L+₹4.9 L (9.15%)Rejected-Finance OPP AIR FORCE STATION VPO SORANA DISTT SAHARANPUR UP PIN 247 232 | SAHARANPUR | UTTAR PRADESH | 247232 | L3 | Rejected-Finance Not lowest |
Tender Value
₹66 L
EMD Value
₹1.2 L
Closing Date
28 Sept 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
CWE AF AMBALA
HQ CWE AF AMBALA Ambala cantt 133001
REPAIR TO CERTAIN ROADS AND KERB STONE IN DOMESTIC AND TECH AREA AT AF STN SARSAWA UNDER GE (AF) SARSAWA
2022_MES_546933_1
CWE/AF AMB/SAR-22/2022-23
Open Tender
Civil Works - Roads
Item Rate
180 days
SARSAWA
For MES enlisted contractor Class C Category a v and for un-enlisted contractor refer NIT
7 documents required · 7 mandatory
₹1,000
GE AF SARSAWA
₹1.2 L
Yes
10 Nov 2022
23 Aug 2022
30 Sept 2022
23 Aug 2022
28 Sept 2022
14 Sept 2022
23 Aug 2022 - 8 Sept 2022
60 days
Amount
M&L repair to potholes of depth not exceeding 30mm, area not exceeding one sqm each including sweeping free from dust and mud or water, scoring sunken surfaces in roads, paths etc by using pressured air, cutting around edges to at least 25 mm in depth, making good by applying a priming/tack coat of bituminous primer (paving bitumen grade VG-10) @ 5 kg per 10 sqm by using mechanical sprayer, putting in premix as specified for thin bituminous carpet (2cm thick) well rammed and sealed with premixed sand seal coat, 6.8kg of binder(paving bitumen) with 0.06 cum of sand, again well rammed(including supply of premix binder and sand) complete all as specified & directed.
M&L preparing of existing black top surfaces of road by brushing with wire brushes for removing caked mud etc sweeping with brooms and finally fanning the cleaned surfaces with gunny bags/air compressor to remove all dust/dirt and applying evenly a priming/tack coat of bituminous primer (paving bitumen grade VG-10) @ 5 Kg per 10 sqm by using mechanical sprayer complete all as specified & directed.
M&L laying premix bituminous macadam using 20mm size graded crushed stone aggregate (grading 2 with nominal aggregate size 19mm), mixed with binder content (paving bitumen grade VG-30) @ 4% by weight of total mix, rolled and compacted with 8 tonne to 12 tonne power road roller to required gradient and camber using full width mechanical sensor paver with string sensor (consolidated thickness not exceeding 75 mm) in single layer complete all as specified & directed. Note: For price adjustment of bitumen & other requirements, refer Sch 'A' Notes.
M&L 30mm thick (consolidated thickness) bituminous pre-mixed, hot mix, semi-dense asphaltic concrete with coarse aggregate of grading 1 as per MORT&H specification in single layer using binder content (paving bitumen grade VG-30) @ 5.5% by weight of the total mix as per design mix including supply and mixing of filler (OPC cement) laid, rolled and compacted to required gradient and camber using full width mechanical sensor paver with string sensor and compacted with 8 tonne to 12 tonne power roller complete all as specified & directed. Note: For price adjustment of bitumen & other requirements, refer Sch 'A' Notes.
Demolition of plain cement concrete (unreinforced) as in kerb stone of any description and in any position not otherwise specifically provided including removal of debris to a distance not exceeding 500 mtr complete all as specified & directed
M&L for laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement : 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete all as specified & directed. Note: (i) The rates include for the use of forms, moulds or machine moulds and setting the blocks, slabs, etc. complete including raking back the joints of the internal faces (at least 10 mm) for pointing as the work proceeds or finishing with neat flush joints.
M&L preparation of newly plastered/concrete surface of any description over 10cm width or girth not otherwise described and applying two coats of synthetic enamel paint(ordinary tint) over & including one coat of compatible primer complete all as specified & directed.
M&L hot applied thermoplastic road marking paint inclusive type I reflectorising glass beads as per table 800-3, 800-4 of MORT&H, applied in uniform thickness of atleast 1.5mm and spread uniformly with reflectorising glass beads type II @ 250 gram per sqm & painting materials @ 650 gram per sqm with a road marking machine as per IRC: 35, with traffic diversion arrangements if required, complete as per MORT&H specification clause 803.4, complete all as specified & directed.
S&F in replacement road stud(any tint), ABS material body, size 110mm x 120mm x 24mm, weight not less than 435 gram, having 50mm long shank, plastic body reflective panel with two highly reflective reflectors, two way fitted in the body, one MS pin fixed with approved epoxy adhesive as per manufacturer's instructions complete all as specified & directed. Make:- Model No. DA-972 of Dark Eye or equivalent of 3M or Shakti
S&F in replacement Solar road stud (100% water proofing design according to IP-67), any tint, 2 way, aluminium alloy shell body, size 125mm x 125mm x 25mm(with shank of 65mm) having two highly reflective reflectors ,Solar powered by Mono-Crystalline solar panel fitted with 6 pieces(3 pieces on either sides) LED's of different clolur with one high capacity Ni-cd rechargeable battery backup of 12 hours continuous lighting at night view distance 1000metre approx, designed to bear load upto 10 tonnes fixed with approved epoxy adhesive as per manufacturer's instructions complete all as specified & directed. Make: Model No. DA-110(Dhruv) of Dark Eye or equivalent of 3M or Shakti
Dismantling posts or struts (wood, steel or RCC) any section, including taking out embedded portion of post in concrete, brick work, masonry etc. and making good disturbed ground complete all as specified & directed.
M&L stainless steel (Grade 304) framework for road sign board, made of hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab or as directed with suitable arrangement complete all as specified & directed.
S&F in repair retro reflective sign board made of high intensity retro reflective sheeting pasted on both sides of 3mm thick Aluminum Composite Panel(ACP) sheet with letters/graphics to be overlayed high intensity retro reflective sheeting as spproved by IRC/MORTH duly plotted cut of approved colour fixed with stainless steel(SS) frame work complete all as specified & directed. Make: 3M, Avery dension, Dark eye, Shakti Note: SS framework for road sign board shall be measured & paid seperately.
M&L PCC 1:2:4, type B2, using 40mm graded mechanically crushed stone aggregate as in foundation, filling and mass concrete complete all as specified & directed.
For Credit Schedule refer tender documents. The amount of credit schedule shall be deducted in total quoted amount of BOQ to arrive contract sum.
M/S STAR CONSTRUCTION
SUBHASH CHAND CONTRACTOR
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .