REP MAINT OF INTERNAL WIRING INCL FITTING FIXTURES CEILING EXHAUST AIR CIRCULATOR WALL FANS MCB DBS HANGER LIGHTS EARTHING LIGHTENING CONDUCTORS AVIATION FLOOD LIGHTS CONNECTED WORKS BLDGS HANGERS NORTH SIDE RUNWAY REP MAINT AIR FIELD LIGHTS PIGMI

Amount

REPAIR/MAINT OF INTERNAL WIRING INCL FITTING AND FIXTURES, CEILING /EXHAUST/AIR CIRCULATOR/ WALL FANS, MCB DB'S, HANGER LIGHTS, EARTHING, LIGHTENING CONDUCTORS, AVIATION/FLOOD LIGHTS AND CONNECTED WORKS FOR BLDGS AND HANGERS OF NORTH SIDE RUNWAY UNDER AGE E/M-I OF GE (NW) VASCO

Taking down carefully any type of copper/aluminium point wiring (light, fan, socket or power) complete including conduits/casing caping with fittings such as switches,ceiling roses, pendents, regulators, bells, sockets, tube light fittings etc, removing the materials/debris and making good the disturbed surface of wallSupply & Fixingloors etc to match with the original existing finish complete all as specified and as directed

Material & Labour for one point wiring with PVC insulated un-sheathed cable with stranded copper conductor FR-LSH conforming to IS : 694 of size 1.5 Sq mm single core, including one No. 1.5 Sq mm single core PVC insulated un-sheathed copper cable FR-LSH as continuous earth wire drawn in and including PVC Casing & Caping double lock/conduit pipe type of as required width (not less than 20 mm in width) ISI marked medium grade white colour with all accessories of same grade fixed on wall/ceiling including terminated in to Cast iron/pressed steel terminal box 60mm deep of required size made out of 2 mm thick MS sheet duly painted both sides with 3 mm thick plastic laminated sheet top cover fixed with brass screw & cup washers and including provision of modular metal flush box, modular cover plate with frame top cover for mounting switches, fan regulators etc for one light point controlled by one 5 Amp switch one way complete all as specified and as directed

All as per item No. 1.02 here in before, but for one fan/exhaust fan point controlled by one 5 Amp all as specified and as directed.

All as per item No. 1.02 here in before,but for one bell/buzzer point controlled by one bell push 5 Amp all as specified and as directed.

All as per item No. 1.02 here in before, but for one light point controlled by two 2-way switches all as specified and as directed.

All as per item No. 1.02 here in before, but for one 3/5 Pin, 5 Amp Switch socket out let on the independent board complete all as specified and as directed

All as per item No 1.02 above, but with 2.5 sqmm for One 3 pin 16 amps socket outlet point controlled by one 16 amps switch on the ndependent board complete all as specified and as directed.

Taking down unserviceable any type of copper/aluminium sub main wiring of any type/size/core/ type complete including conduits/casing caping etc, removing the materials/debris and making good the disturbed surfaces of walls, floors and ceilings etc to match with the original existing finish complete all as specified and as directed.

Material & Labour for sub main wiring with two runs of single core 2.5 Sqm, FRLS Copper conductor PVC insulated unsheathed cable as per IS 694-1990 (third revision) drawn through & including non- metallic rigid PVC casing caping (double interlock type) of suitable width medium duty with all accessories such as Tees, elbows, junction boxes etc, as required fixed on wall along with one run of 2.5 Sqmm single core PVC FRLS insulated unsheathed copper conductor cable as continuous earth wire and connecting to existing main switch board/ distribution board and testing on completion etc complete all as directed. (Note :- Two runs of cable, one run of earth continuity conductor and one run of PVC casing caping/conduit shall be measred as one unit)

All as per item No1.09 here in before, but two run of single core 4 sqmm and one run of 4 sqmm cables as earth continuity conductor all as directed.

All as per item No 1.09 here in before, but two run of single core 6 sqmm and one run of 4 sqmm cables as earth continuity conductor all as directed.

All as per item No 1.09 here in before, but four run of single core 10 sqmm and two runs of 6 sqmm cables as earth continuity conductor all as directed.

Supply & Fixing in repairs Switch Piano flush button single pole one way 5 A , 240 V complete all as specified and as directed

Supply & Fixing in repairs modular Switch single pole one way 6 A, 240 V complete all as specified and as directed

Supply & Fixing in repairs modular Switch single pole one way 16 A, 240 V complete all as specified and as directed

Supply & Fixing in repairs Bell push flush button, single pole, one way, 240 V, 5 A complete all as specified and as directed

Supply & Fixing in repairs Modular Bell push single pole, one way, 240 V, 6 A complete all as specified and as directed

Supply & Fixing in repairs Switch Socket combination 2 in 1, 5 Amp flush type, 240 V, complete all as specified and as directed

Supply & Fixing in repairs Modular Socket outlet 2 in 1, 6 Amp , 240 volts, complete all as specified and as directed

Supply & Fixing in repairs Switch Socket Combination 5A/16A, 5 in 1, 3 pin, 240 volts complete all as specified and as directed

Supply & Fixing in repairs Modular Socket outlet 5A/16A, 5 in 1, 3 pin, flush type universal, 240 voltscomplete all as specified and as directed

Supply & Fixing in repairs Ceiling rose, surface bakelite, 65 x 50 mm two/ three terminals 240 volts complete all as specified and as directed

Supply & Fixing in repairs call bell ding dong AC, 230 volts, single pole all as directed

Supply & Fixing in repairs stepped type electronic fan regulator flush type as per exisitng model on the existing board all as directed.

Supply & Fixing in repairs stepped Modular electronic fan regulator flush type on the existing board all as directed.

Supply & Fixing in repairs modular flush metal box with inner & outer sheet fixed in 60 mm deep of following size fixed with screw for mounting modular switches, Sockets, fan regulators etc for existing elect arrangements and connected to the existing elect wires, making good the distrubed area with cement work and paints as same existing backgound all as directed. (Note : New modular switches, socketSupply & Fixingan regulators will be measured and paid separely) (a) Size of the boxes suitable for 1/2 module

All as per item No. 1.26 here in before, but Size of the box suitable for 3 module

All as per item No. 1.26 here in before, but Size of the box suitable for 4 module

All as per item No. 1.26 here in before, but Size of the box suitable for 6 module

All as per item No. 1.26 here in before, but Size of the box suitable for 8 module

All as per item No. 1.26 here in before, but Size of the box suitable for 12 module

Supply & Fixing in repairs White inner, outer cover plate Modular type with frame, 2 module

All as per item No 1.32 here in before but 3 module

All as per item No 1.32 here in before but 4 module

All as per item No 1.32 here in before but 6 module

All as per item No 1.32 here in before but 8 module

All as per item No 1.32 here in before but 12 module

Supply & Fixing in repairs PVC Casing & Caping double lock type of as required width (not less than 20/25 mm in width) ISI marked medium grade white colour with all accessories of same grade fixed on wall/ceiling etc. complete all as specified and as directed.

Supply & Fixing in repairs knob suitable for Rotary type Flamproof switch in LM6,15A single pole 250V complete all as specified and as directed.

Taking down unserviceable any type of Main Switch, DB's including MCBs incl wooden/GI/MS sheet board etc and removing from site and making good the disturbed surface of wall etc all as specified and as directed.

Supply & Fixing in repairs sheet metal enclosure with a two pin and earth plug and socket complete with one SP MCB 20 Amps complete all as specified.

All as per item No 1.41 here in before but MCB DB TPN 4 way DB 415 V double door with 200 A rated busbar.

Supply & Fixing in repairs MCB DB SPN 8 way DB 230 V with 200 A rated bus bar double door type complete all as specified and as directed.

All as per item No 1.43 here in before but MCB DB SPN 4 way DB 230 V with 200 A rated busbar.

All as per item No 1.43 here in before but MCB DB SPN 12 way DB 230 V with 200 A rated busbar.

Supply & Fixing in repairs MCCB DB VTPN, 4 way, prewired (MCCB + 24 way O/G) double door, with provision of one MCCB of 100 amps breaking capacity 25 KA , 4 pole without MCB complete all as specified and as directed

Supply and fix in repairs MCCB of 100 to 125 A breaking capacity 25 KA , 4 pole thermal megnetic release, compact type suitable for MCCB DB Vertical type as incoming in the existing DB's complete all as specified and as directed

Supply & Fixing in repairs MCB 4P 63 amps 415 volts C curve, 50 HZ AC 10 KA complete all as specified.

Supply & Fixing in repairs MCB 4P 32 amps 415 volts C curve, 50 HZ AC 10 KA complete all as specified.

Supply & Fixing in repairs MCB TP 40 amps 415 volts C curve, 50 HZ AC 10 KA complete all as specified.

Supply & Fixing in repairs MCB DP 32 amps 230 volts C curve, 50 HZ AC 10 KA complete all as specified.

Supply & Fixing in repairs MCB SP 06 to 32 amps 230 volts C curve, 50 HZ AC 10 KA complete all as specified.

Supply & Fixing in repairs power unit combo 25 A MCB protected socket Complete all as specified.

Fixing only Energy efficient surface Mounted LED Luminire 18 watts 4' long, with acrylic cover complete with all accessories incl necessary two core copper wire for connection from ceiling rose to connector of approx length 0.75 mtr and removal of old unserviceable lights and depositing to MES yard comlete all as specified and directed by Engr-in-Charge. Note :- (a) LED tube lights fittings will be supplied under Sch B items.

Supply & Fixing Energy efficient surface Mounted LED Luminire 20 watts 4' long, with acrylic cover aluminium exeruded body complete all as specified and directed by Engr-in-Charge.

Supply & Fixing Energy efficient surface Mounted LED Luminire 40 watts 4' long, with LED betten for surface mounting, pandent and conduit mounting high transmissitivity defuser and high lumen output complete all as specified and directed by Engr-in-Charge.

Supply and fixing LED light fitting 30 Watt flame proof, CMRI certified recommended for gas/ vapor group of IIA & IIIB, Zone 1 & 2 and IP 65 protectio with die cast aluminum housing with heat resistant toughened glass, with LED tube light fixtures driver,holders, connector etc. Complete with all accessories prewired and including connecting up with three core flexible copper conductor cable with suitable size.

Supply & Fixing in repairs Energy efficient surface Mounted LED Luminire 10 watts 2' long, with acrylic cover complete with all accessories incl necessary two core copper wire for connection from ceiling rose to connector of approx length 0.5 mtr all as directed.

Supply & Fixing in repairs recess/surface mounting high lumen LED flat panel 2'X2' 36 Watt, white powder coated CRCA housing with highpower LEDs , aluminium front frame with flat white high transmission acrylic cover, internally prewired, 230V,complete with all accessories such as electronic driver,LED strip,connector block etc.and necessary fixing arrangement at any height and removing old unserviceable item complete all as specified and directed.

Taking down old unservicable CFL/LED bulb and Supply and fix retrofit inverter lamp, works on AC supply in Normal mode and DC supply in Normal mode and DC supply in inverter mode, with inbuilt battery back up of upto 4 hours, high efficiency, high lumes output, LED bulb 9 W 240volts, 50Hz, including removing old unserviceable item complete all as specified and directed.

Supply & Fixing in repairs LED light fitting 1x10 W inbuilt sensor based smart LED auto dimmable batten made form powder coated, made from industrial enginnering grade extruded polymer housing, opaque glare free diffuser, prewired with all accessories integrated electronic driver complete all as directed.

Material & Labour for Earthing complete with Galvanised earth plate electrode 600 x 600 x 6 mm thick buried directly in ground earth pit not less than 2.25mtr deep below normal ground level with top edge of the plate not less than 1.5 mtr below normal ground level connected to galvanised earth wire 4 mm dia by mean of nuts/bolts, check nuts and washers of brass as shown in electrical plate No. 5 of SSR part-I including necessary excavation and earth work, GI Pipe 15 mm bore light grade for watering with Funnel, wire mesh and protection to earth lead shall be provided with GI pipe light grade 20 mm dia up to 7.5 mtr from the earth plate electrode and refilling of soil including adequate quantity of charcoal dust and common salt etc & earth work in any strata, PCC pit chamber in cement mortar 1:3:6 type C-2 with 40 mm thick Precast RCC cover slab 1:2:4 type B with 8 mm dia TMT bar and handle with lifting hooks including testing any type complete all as specified and as directed.

Material & Labour Earthing complete with galvanized steel earth plate electrode of size 60cm x 60cm x 6mm thick, buried directly in ground vertically earth pit not less than 2.25 mtr deep below the ground level with top to edge of the plate n. less than 1.5 mtr below ground level connected to galvanized iron strip 25 x 4mm as earthing lead by means of blots, nuts, check nut and washer of galvanized steel, including necessary earth work and excavation in any strata and PCC 1:3:6 type C2 chamber and RCC cover and light grade GI pipe 40 mm dia pipe of required length for protection of GI wire and water funnel and wire mesh with GI pipe medium grade 20mm dia etc complete all as per electrical plate No 3 of SSR part - I and all directed including connections and testing on completion.

Material & Labour for exhaust fan AC single phase 230V of size 300 mm sweep heavy duty with louver and connecting up including provision of flexible copper wire three core of size 23/0.0076 from ceiling rose/PVC connector to exhaust fan all as specified.

Material & Labour for exhaust fan AC single phase 230V of size 450 mm sweep heavy duty with louver and connecting up including provision of flexible copper wire three core of size 23/0.0076 from ceiling rose/PVC connector to exhaust fan all as specified.

Supply & Fixing in repairs Switch Flameproof WP Rotary type with termination box in LM6,15A single pole 250V

Supply & Fixing in repairs Flameproof Switch socket combination with termination box in LM6,16A single pole 250V

Supply & Fixing in repairs Test point terminal block made of gun metal or phosphorus bronze size 75x75x25mm drilled and screwed including 3 Nos. 8 mm dia 25mm long hex. Head screw

Supply & Fixing in repairs Aluminum strip of size 25 x 3 mm in repair with saddles and fixing screws etc. for roof conductors and down conductors above ground and fixing in the same location with new nuts and bolts of suitable size and length and connected to air termination rod on top of the hangar complete all as directed.

Supply & Fixing in repairs Integral decorative LED bollard with opal acrylic with IP-65 protection of 9 watts capacity all as directed.

Supply & Fixing in repairs wellglass LED luminaire 40 W, hightly durable luminaire, usable in rough environment complete all as specified and directed by Engr-in-Charge.

Material & Labour for PCC 1:3:6 type C-1 using 20 mm graded stone aggregate including use and waste of form work for pole coping all as dirceted.

Supply & Fixing in repairs integral LED aviation light comprising of aluminium housing with polycarbonate enclosure with necessary fixing arrangement such as GI pipe, fixing clamp, brackets, etc., complete all as specified

Supply & Fixing in repairs 1 x 60 watts LED building security light made up of pressure die cast housing with toughned glass and individual LEDs with secondary optics and IP66 protection for building security lights all as specified.

Supply and fix in replacement of 90 Watt LED street light with pressure die cast aluminium housing & toughened glass with IP-66 degree protection, individual LED's must have peanut lenses for better throw across & along the road with luminarie efficacy of greater than 100 lumen/Watt. The luminarie should have 5 KV surge protection, PF > 0.95, and total harmonic distortion of THD < 10%, voltage range of 140-280V should be provided. The manufactures LOGO must be embossed/Engraved in the housing of the luminarie complete all as specefied and directed by Engr-in-charge.

Material & Labour for Street light bracket made out of GI tubing 32/40 mm dia, light grade bend to shape suitable for below mentioned security light fitting with necessary MS clamps with one coat of red oxide and two coats of aluminium paint including nut, bolt, washers etc.

Supply & Fixing in repairs LED High bay luminaires 1 x 150 watts Energy saving, environment friendly & robust open type vertical Highbay LED luminaire with high power COB LED as light source all as specified and as directed

Supply & Fixing in repairs LED High bay luminaires 1 x 200 watts Energy saving, environment friendly & robust open type vertical Highbay LED luminaire with high power COB LED as light source all as specified and as directed

Supply and fix in repairs LED flood light fitting 200 watts made in pressure die cast aluminium housing and reflector and enclosed with toughened glass with IP66 protection complete with all accessories such as LED's and electronic driver, internally prewired including necessary fixing arrangement on PCC pole by providing MS angle iron bracket 50x50x6mm of adequate length as per site requirement with MS flat iron clamp 32x6 mm with necessary nuts, bolts and washers etc and making cable connection all as specified and directed.

Supply and fix in repairs LED flood light fitting 240 watts made in pressure die cast aluminium housing and reflector and enclosed with toughened glass with IP66 protection complete with all accessories such as LED's and electronic driver, internally prewired including necessary fixing arrangement on PCC pole by providing MS angle iron bracket 50x50x6mm of adequate length as per site requirement with MS flat iron clamp 32x6 mm with necessary nuts, bolts and washers etc and making cable connection all as specified and directed.

Taking down carefully ceiling fans of size 1200/1400 mm sweep at any height of any sweep/make/model after disconnecting electric connection and dismantling and opening the body of ceiling fan and examine for repairs including servicing,overhauling, greasing etc and cleaning the complete body both internal & external parts with cleaning agent and renewal of minor spare parts such as split pins,cater pins,coupling bolt, capacitor holder ,terminal adoptor,screws, nuts, spring washers for blade/body etc and replacement of components/ accessories such as ball bearings,gun metal bushes,capacitor,canopy top& bottom, shackle clip assembly and assembling of all parts including hanging and fixing back in existing location and connecting of electrical connections and testing for its satisfactory performance complete all as specified and directed. Note :- (i) Spare parts will be measured and paid separately under relevant item of schedule as supply only. (ii) Rewinding of fan motor,painting will be measured and paid separetly under relevant item of schedule. (iii) Labour element for fixing of spare parts and removing old unserviceable items are deemed to be included in quoted rate

All as per item No. 1.81 above,but exhaust fan of size upto 300 mm and 380 mm sweep all as directed.

All as per item No. 1.81 above,but exhaust fan of metal body size above 380 mm and upto 450 mm sweep all as directed.

All as per item No. 1.81 above, but Air circulator wall mounted type 450 mm to 600 mm sweep including carrying out repairs to oscillation mechanism/speed regulation mechanism and making functional for satisfactory performance.

Material and labour for painting to ceiling fan of size 1200 mm sweep to 1400 mm sweep complete body, blades & down rod etc of any sweep/make/model with two coat of synthetic enamel paint by using electric spray machine similar to match with existing colour after preparation surfaces including marking of MES Number with black paint complete all as specified and directed (Note :- Painting work to be carried out after dismantling of ceiling fan)

All as per item No. 1.85 above,but exhaust fan of metal body size above 300 mm to 450 mm sweep all as directed.

All as per item No.1.85 above,but Air circulator wall mounted type 450 mm to 600 mm sweep all as directed.

Material and labour for rewinding of ceiling fan motor of size 1200 mm sweep to 1400 mm sweep of any make/model/type with new supper enamelled copper winding wire of similar gauge and number of turns as existing,including cleaning the motor properly and applying varnishing heating and assembling of fan motor and rotor fixing back after testing including removing burnt out copper winding wire from ceiling fan motor complete all as specified and directed.

All as per item No 1.88 here in before but of exhaust fan of size upto 300 mm and 380 mm sweep all as directed.

All as per item No 1.88 here in before but of exhaust fan of size above 380 mm and upto 450 mm sweep all as directed.

All as per item No 1.88 here in before but of Air circulator wall mounted type 450 mm to 600 mm sweep all as directed.

Supply & Fixing in repairs capacitor of 2.5/3.15/4.0 mfd capacity for ceiling fan of any sweep all as specified.

Supply only shackle clip assembly with rubber bush reel and nuts,bolts and washers suitable for ceiling fan of any sweep/type.

Supply only ball bearing suitable for ceiling fan/exhaust fan/air circulator/pedestal fan any type all as directed.

Supply only split pin as per sample suitable for ceiling fan all as directed.

Supply only MS nut bolt with split pin as per sample and as directed by Engr-in-charge

Supply only plastic conopy top and bottom with tighten screw suitable for ceiling fan of any sweep/type.

Supply and fix down rod made of MS pipe medium grade 15mm dia of 300/600mm long duly drilled holes both ends & slot with hole in other end suitable for fixing of ceiling fan of any sweep/type and painting to of down rod with two coat of synthetic enamel paint over one coat of red oxide primer.

Supply and Fix in repair Ceiling Fan motor with body complete suitable 1200 mm Sweep matching to blade of existing ceiling fan all as specified and as directed.

Supply and Fix in repair Fan Blade set of three suitable of any make and sweep up to 1200 mm sweep matching to existing ceiling fan all as specified and as directed. Note:- Fan Blade make and size shuld be supply with the mach of under relivent item of Sch A serial No 106 as above.

Supply and fix copper conductor cable, PVC insulated, sheathed,flexible, multistranded,ISI marked, 1100 volts grade 3 core ;0.75 sqmm and including electric connection to ceiling fan and ceiling rose complete all as specified and directed

Material & Labourfor removing old unserviceable blade assembly from exhaust fan and fixing new exhaust fan blade assembly suitable of size 300 mm to 450 mm sweep and including locking nuts and testing complete all as specified and directed.

Material & Labourfor removing old unserviceable blade assembly from Air circulator fans and fixing new blade assembly suitable of size 450 mm to 600 mm sweep air circulator and including locking nuts and testing complete all as specified and directed.

Material & Labourfor removing old unserviceable motor assembly from exhaust fan and fixing new exhaust fan motor assembly suitable of size 300 mm sweep and including nuts, washers, and testing complete all as specified and directed.

Material & Labourfor removing old unserviceable motor assembly from air circulator fans and fixing new aircurlator fan motor assembly suitable of size 450-600 mm sweep and including nuts, washers, and testing complete all as specified and directed.

Material & Labour in replacement LED decorative post top lantern light with a modern look uning new generation technology LED 35 W with diffuser and painted aluminium deflector 35 watt all as specified and directed.

Supply & Fixing in repairs Perforated cable Tray made out of GI sheet of 14 SWG in various sizes including accessories like coupler plate, nut bolts, washers clamps , wall brackets up/down elbows, bends tees etc and fixing with FRP saddles in equal distances on wall/floor/through wall crossing and making good the surface

Supply & Fixing in repairs GI clamp/Saddles for fixing of XLPE cable of any size on the wall surface incuding drilling in wall, fixing of new screws suitable length complete all as specified & directed by Engineer-in-Charge.

REPAIRS / MAINT AIR FIELD LIGHTS / PIGMI / DISPERSAL LIGHTS AND CONNECTED WORKS AT INS HANSA

Excavation in trenches 1.5 Mtr wide and not exc 1.5 Mtr deep in hard/dense soil getting out and levelling of bottom surface to required level for laying UG cable/errection of poles complete all as specified and directed by Engr-in-charge.

Excavation in trenches 1.5 Mtr wide and not exc 1.5 Mtr deep in soft/disintegrated rock getting out and levelling of bottom surface to required level complete all as specified and directed by Engr-in-charge.

Excavation in trenches by cutting of road crossing/PCC hard standing, under boundary wall for laying of pipe/cable including making good the existing surface with same finish to match the original finish complete all as specified and directed by Engr-in-charge.

Returning filling in, including spreading, leveling, watering and well ramming in layers not exc 25cm thick complete all as specified and directed by Engr-in-charge.

Removing excavated material of soils from site to a distance not exc 50 mtr away and depositing where directed not exc 1.5mtr from the starting point complete all as specified and directed by Engr-in-charge.

Supplying & Laying in trenches Clear Sand/m- Sand for cushioning under ground cable 8 cm below and 15 cm above complete in level complete all as specified and directed by Engr-in-charge. Note: Punned thickness only will be measured and paid.

Supplying & Laying precast concrete cable cover, class LV, type 1, flat, size 250mm x 150mm x 40mm in trenches for protect to under ground cable complete complete all as specified and directed by Engr-in-charge.

Supply and fix or laying in trenches/on wall/poles/structures as in repairs GI tubing light grade of size 80 mm dia for road crossing/for cable protection/fixing of pigmi lights etc,of the following sizes including necessary provision for cable entry if reqd in pigmi lights pole, fixing MS nut, bolt & washers/MS clamps complete as required complete all as specified and directed by Engr-in-charge.

All as per item No3.08 Here in before but of size 50 mm dia

All as per item No 3.08 Here in before but of size 40 mm dia

Supply and fix in repairs GI tubing medium grade of size 50/65/80 mm dia for pigmi light pole with provision for pole foundationa and fixing of pigmi lights etc,of the following sizes or capacity including necessary provision for cable entry if reqd in pigmi lights pole, fixing MS nut, bolt & washers/MS clamps ,reducer and requred complete as required complete all as specified and directed by Engr-in-charge. Note:- (a) pigmi light/street light will be measerd and paid separeatly under relivent items. (b) pole foundation or coping og foundation will be measerd and paid separeatly under relivent items.(c ) Height of pole above the ground level is appx 1.4 mtr and fix in foundation 0.6 mtr will be cosidered in this items.

Supply and fix in repairs GI tubing medium grade of size 50/65/80 mm dia for pigmi light pole with provision for pole foundationa and fixing of pigmi lights etc,of the following sizes or capacity including necessary provision for cable entry if reqd in pigmi lights pole, fixing MS nut, bolt & washers/MS clamps ,reducer and requred complete as required complete all as specified and directed by Engr-in-charge. Note:- (a) pigmi light/street light will be measerd and paid separeatly under relivent items. (b) pole foundation or coping og foundation will be measerd and paid separeatly under relivent items.(c ) Height of pole above the ground level is appx 3.0 mtr and fix in foundation 0.6 mtr will be cosidered in this items.

Material & Labour for PCC 1:4:8 type D-2 using 40 mm graded stone aggregate including use and waste of form work of concrete for any description incl preparation work is necessary complete all as specified and directed by Engr-in-charge.

Material & Labour for PCC 1:3:6 type C-1 using 20 mm graded stone aggregate including use and waste of form work / mass concrete for coping of poles/using at any description complete all as specified and directed by Engr-in-charge.

Supply and fix in repairs Galvanised Iron cross arms channel, bracing, support, clamps etc fabricated structured steel, sections, including nuts, bolts, washers etc and cutting to required length beat to any shape drilling holes, fixed on poles or jointed by means of elect welding complete incl taking down/dismantling the old items complete in any sub station/installations structure complete all as specified and directed by Engr-in-charge.

Supply & Fixing in repairs Pin type porcelain vitreous,brown of white insulator to suit 1100 Volt working pressure of size 100 mm height, 65mm dia, including one galvanised mild steel spindle, two galvanished iron washer and one GI nut complete all as specified and directed by Engr-in-charge.

Supply & Fixing in repairs Shackle type Porcelain, vitreous, white, brown or green insulator including galvanised mild steel straps, washers, insulator bolts, washers and nuts, of height 100 mm and dia 115 mm having working pressure 1100 volts grade complete all as directed.

Taking down old unserviceable LT UG cable from any description (trenches, walls, ceilings etc) from various locations, Supply and laying under ground LT Cable XLPE insulated heavy duty armoured sheathed 1100 volts grade of cross sectional area 10 Sq mm, 2 core, with aluminium conductor, ISI marked as per IS : 7098( Part-1) along with suitable size aluminium cable lugs, gland if required and jointed in any description complete all as specified and directed by Engr-in-charge. Note :- (a) Excavation, Concrete cable protection cover, pipe, PCC work for road crossing/hard standing and Sand for cushioning will be measured and paid separately. (b) Cost of glands, aluminium cable lugs (eye lid/barrel/bottle neck type/ring type or any shape) new nut, bolt and washers of required size/description are deemed to include in this rate.

All as per item No 3.18 here in before but of size 2 core 16 sqmm

All as per item No 3.18 here in before but of size 4 core 16 sqmm

All as per item No 3.18 here in before but of size 4 core 25 sqmm

All as per item No 3.18 here in before but of size 3 1/2 core 35 sqmm

All as per item No 3.18 here in before but of size 3 1/2 core 50 sqmm

All as per item No 3.18 here in before but of size 3 1/2 core 70 sqmm

Supply & Fixing in repairs LT heat shrinkable Straight through cable Jointing kit, complete with jointing material and accessories suitable for 2 core XLPE armoured Aluminium conductor cable of size 10 to 16 sqmm complete all as specified and directed by Engr-in-charge.

All as per item No 3.25 here in before but of size 4 core 16 to 25 sqmm

All as per item No 3.25 here in before but of size 3.5 core 35 to 50 sqmm

All as per item No 3.25 here in before but of size 3.5 core 70 to 95 sqmm

Material and labour for fault finding of LT cables of size 25 to 150 sqmm X 3.5 core and any length with fault detective machine by thumbing method and suitable voltage and all as per manufactures instructions including providing straight through joint and additional cable of same existing size suitable to site requirement complete all as specified and directed by Engr-in-charge.

Material & Labour for Earthing complete with GI earth plate, electrode,600x600x6.0 mm thick burried directly in ground (earth pit not less than 2.25m deep below normal ground level) filled with common salt and charcoal and connected to GI earth strip 32 x 6 mm thick dia by means of GI nuts, bolts, & washers as shown in electrical plate No. 5 of SSR Part-I and Connected to earthing test point all as specified and including necessary PCC earth pit chamber of 1:3:6 and chamber cover of 50mm thick PCC 1:2:4 with 6mm dia mild steel reinforcement of 10 cm c/c spacing both ways in lieu of CI cover, watering arrangement shall be made with GI pipe light grade of 20mm dia including funnel and protection to earth lead shall be provided with GI pipe light grade 40 mm dia unto 7.5 from the earth plate electrode & refilling of soil etc including necessary excavation & earth work in any strata and PCC chamber complete all as specified and directed by Engr-in-charge including demolish existing earth pit taking out old materials.

Material & Labour for Earthing complete with copper earth plate electrode 600 x 600 x 3.15 mm thick buried directly in ground earth pit not less than 2.25mtr deep below normal ground level with top edge of the plate not less than 1.5 mtr below normal ground level connected to copper strip size 20 x 3 mm thick by mean of nuts/bolts, check nuts and washers of brass as shown in electrical plate No. 5 of SSR part-I including necessary excavation and earth work, GI Pipe 15 mm bore light grade for watering with Funnel, wire mesh and protection to earthing strip shall be provided with GI pipe light grade 32 mm dia up to 7.5 mtr from the earth plate electrode and refilling of soil including adequate quantity of charcoal dust and common salt etc & earth work in any strata, PCC pit chamber in cement mortar 1:3:6 type C-2 with 40 mm thick Precast RCC cover slab 1:2:4 type B with 8 mm dia TMT bar and handle with lifting hooks including testing any typecomplete all as specified and directed by Engr-in-charge including demolish existing earth pit taking out old materials.

Supply & Fixing in repairs Energy efficient LED street Light Luminaire 60 watts capacity comprises a die-cast aluminium housing including connections with 3 run of 2.5 Sq mm aluminium unsheathed wire multistranded from LT over head line/junction box to the connector of fitting, (connection wires shall not be less than 2.5 metre in length duly run through GI bracket) complete all as specified and directed by Engr-in-charge

All as per item No 3.32 here in before but of LED street Light Luminaire 72 watts capacity complete all as specified and directed by Engr-in-charge.

All as per item No 3.32 here in before but of LED street Light Luminaire 90 watts capacity complete all as specified and directed by Engr-in-charge.

Supply & Fixing in repairs LED Cup type street Light Luminaire 20 watts capacity comprises a die-cast aluminium housing incl connections with 2 run of 2.5 Sq mm aluminium unsheathed wire multistranded run through GI bracket complete all as specified and directed by Engr-in-charge.

Supply & Fixing in repairs LED Energy Efficient & high reliable IP 66 Wellglass luminaire with Cradle & Eyebolt mounting, in-built Loop in-Loop Out facility by metal gland ensures optimization in installation process Light Luminaire 30 watts capacity comprises a die-cast aluminium housing incl connections with 2 run of 2.5 Sq mm aluminium unsheathed wire multistranded complete all as specified and directed by Engr-in-charge.

Supply and fix in repairs LED flood light fitting 180 watts made in pressure die cast aluminium housing and reflector and enclosed with toughened glass with IP66 protection complete with all accessories such as LED's and electronic driver, internally prewired including necessary fixing arrangement on PCC pole by providing MS angle iron bracket 50x50x6mm of adequate length as per site requirement with MS flat iron clamp 32x6 mm with necessary nuts, bolts and washers etc and making cable connectioncomplete all as specified and directed by Engr-in-charge.

Supply & Fixing in repairs integral LED aviation light comprising of aluminium housing with polycarbonate enclosure with necessary fixing arrangement such as GI pipe, fixing clamp, brackets, etc., complete all as specified and directed by Engr-in-charge.

Supply & Fixing in repairs Street light bracket made out of GI tubing 32/40 mm dia, light grade bend to shape of approx length 1.0 mtr long suitable for security/street light fittings with necessary MS clamps - 02 Nos with one coat of anti corrosive primer and two coats of aluminium paint including nut, bolt, washers etc complete all as specified and directed by Engr-in-charge.

Supply & Fixing in repairs Street light bracket made out of GI tubing 25 mm dia, light grade bend to shape of approx length 1.0 mtr long suitable for security/street light/Pigmi light fittings with necessary fixing arrangements -with one coat of red oxide and two coats of synthetic enamel paint including nut, bolt, washers etc complete all as specified and directed by Engr-in-charge.

Supply only LED driver with transformer suitable for 25 to 60 watts LED street/Flood/high bay light fitting of complete all as specified and directed by Engr-in-charge.

Material & Labour for graded coarse aggregate (broken stone or boulders) of size 40 mm in substation yard for laying complete all as specified and directed by Engr-in-charge.

Supply and laying or fixing or passing through pipe, 1100 volts grade heavy duty cable with PVC insulated 3 core stranded copper conductor served with an inner sheathing of PVC tape PVC sheathed 2.5 sqmm nominal cross section in service connection/ light connections in garden light from juction box to fittings complete all as specified and directed by Engr-in-charge.

Supply and fix in repairs cable junction boxes IP 66 protected “halogen free and weather proof” suitable for out door type ( with metric knockouts for cable entry) of size 139 x 119 x 70 mm incl necessary suitable size new aluminium busbar single phase with neutral system mounted on saddles - 02 Nos of suitable length and thickness, provn of aluminium cable lugs for incoming & out going LT cable connections with junction box fixing clamps made up of MS flat, nut and bolt on poles complete all as specified and directed by Engr-in-charge.

Supply and fix in repairs cable junction boxes IP 66 protected “halogen free and weather proof” suitable for out door type (with metric knockouts for cable entry) of size 333 x 233 x 120 mm mm incl necessary suitable size with cable terminal assy mounted on saddles suitable for 3 phase with neutral system - 04 Nos of suitable length and thickness, provn of aluminium cable lugs for incoming & out going LT cable connections with junction box fixing clamps made up of MS flat, nut and bolt on poles complete all as specified and directed by Engr-in-charge.

Material & Labour for scraping of old paint from decorative poles for pigmi light appx length 3 mtrs and dia 40/50/80 mm, including breacket of pigmi light cleaning with emary paper and waste cloths, applying one coat of red oxide primer, and two coat of synthetic enamel paint by spray gun of desired colour complete all as specified and directed by Engr-in-Charge.Note:- Colour of paint for pole is approved by Engr-in-Charge.

Material & Labour for scraping of old paint from decorative poles for pigmi light appx length 1.5 mtrs and dia 40/50/80 mm, including breacket of pigmi light cleaning with emary paper and waste cloths, applying one coat of red oxide primer, and two coat of synthetic enamel paint by spray gun of desired colour complete all as specified and directed by Engr-in-Charge.Note:- Colour of paint for pole is approved by Engr-in-Charge.

Material & Labour for removing vegitation, grass, scrubs and bushes or any small tree branches growing in Sub station yard along with fancing, around the pole, under the HT / LT transmission lines, yards or any description by mannually/mechanically and keep the sub station yard neat and clean complete all as specified and directed by Engr-in-charge. Note :- Unit rate quoted deemed to include to keep the installation neat and clean through out the period of contract and each cleaning will be measured and paid.

Supply and laying or fixing or passing through pipe, 1100 volts grade heavy duty cable with PVC insulated 3 core stranded alluminium conductor 1.5 sqmm nominal cross section in service connection/light connections in garden light from juction box to fittings complete all as specified and directed by Engr-in-charge.

star freeze service

sapna enterprises

Shine Enterprises

OM SAI ELECTRICALS

Shree Ram Enterprises

M/s. R.S. LAWANDE

M/s J.D. DESAI