Providing Genset Arrangements to TVM Medical College Hostel in Tiruvannamalai District

Supply and clamping of 3-1/2 x 95 sq.mm. PVC LTUG armoured cable on post or on wall with MS clamps.

Supply and fixing of brass cable gland for 3-1/2 x 95 sq.mm. PVC armoured LTUG cable with earth connection.

Supply and providing cable end termination of 3-1/2 x 95 sq.mm. PVC LTUG aluminium armoured cable with necessary aluminium cable sockets by crimping etc., with electrical connection complete.

Supply and clamping of 3-1/2 x 120 sq.mm. PVC LTUG armoured cable on post or on wall with MS clamps.

Supply and fixing of brass cable gland for 3-1/2 x 120 sq.mm. PVC armoured LTUG cable with earth connection.

Supply and providing cable end termination of 3-1/2x120sq.mm. PVC LTUG aluminium armoured cable with necessary aluminium cable sockets by crimping etc., with electrical connection complete.

Supply and fixing of 200 A Three phase 500V 4 Pole Change over Switch on suitable angle iron frame work with MS cable entry boxes with Earth connection only.

Supply and fixing of 65 mm dia. (2 -1/2") GI pipe (class B) of 6 metre length with 300mm x 300mm x 6mm MS base plate duly welded at the bottom with concreting with construction of masonary pedestal.

Supply, erection, commissioning, testing and handing over of 1No 160 KVA (128 KW) Diesel Generator Set with acoustic enclosure conforming to CPCB IV+ Norms and BIS Specifications canopy, fuel tank battery charging alternator with Standard Panels developing 3 phase electrical output 160 KVA powered by diesel engine of 0.8 P.F Three phase 415/420Volts, 50 c/s, 115 BHP at 1500 RPM as detailed below. a]. ENGINE: Model 6SL 8800 TA turbo charged vertical inline 6 cylinders. Liquid cooled diesel engine developing 200 HP at 1500 RPM conforming B.S 5514 / 6490 or IS 10000 incorporating the following accessories. The engine shall comprise the following standard fittings Flexible coupling with guard, Flywheel, Air cleaner, Fan blower type with guard, Radiator with guard, water pump engine mounted, Fuel pump, Fuel filter, Lubrication oil filter, Lubrication oil pump, Governor (mechanical / hydraulic) Exhaust silencer residential type. b]. Electric starting equipment, complete with starter motor, dynamo and battery with cables, flexible exhaust piping of 50cms length c].ENGINE INSTRUMENT PANEL MOUNTED: Starting push button with key, lubricating oil temperature gauge, lubricating oil pressure gauge, water temperature gauge, safety control for low lubricating oil pressure, safety control for high water temperature, safety control for over speed, hour meter and RPM meter indicator, battery. charging ammeter. The engine should be capable of providing 10% overload for one hour for every 11 hours continuous running at full load. d]. ALTERNATOR: KIRLOSKAR GREEN make Alternator rated at 160 KVA, 415V, 0.8PF, 50Hz, 3phase , 4wire self regulated and self exited with voltage regulation of + or 1% class “H” insulation in SPDP enclosure and confirming to IS 4722/BS 2613,

suitable for close coupling. trip proof with IP21 protection as per ISI. e]. AMF CONTROL PANELS The control panel (cubical) should be vermin and dust proof and fabricated with 16 SWG CRCA sheet metal and floor mounted with suitable hinged doors, enamel painted & incorporating the following. 1No.KWH meter. 1No. Frequency meter 1No. Voltmeter selector switch. 1No. KW meter 1No.Ammeter selector switch with Ammeter. 1No.AC voltmeter. 3NOs.Current transformer with suitable ratio. 1Set of pilot lamps and push button switch for ON and OFF operation. 1Set input terminal board. 1Set output terminal board." "1No. MCCB of suitable capacity with magnetic thermal overload release instantaneous short circuit trip under voltage release. 1Set of HRC fuses for back up protection. 1Set of fuses for the meters 1No.power factor meter 1No. Battery charger for charging the battery from mains comprising of i)Transformer ii)Rectifier iii) DC ammeter iv)DC voltmeter v)charging rate selector switch vi)circuit breaker vii)voltage regulator [Note: this will be in