REPAIR TO ROAD FURNITURE, SIGN BOARD AND REPAIR TO ROOF, BALCONY, PARAPET AND CONNECTED B/R WORKS IN OFFRS MD ACCN AT SHANKAR VIHAR UNDER AGE B/R-II OF GE (SOUTH) DELHI CANTT-10

Amount

M&L for preparing bituminous surfaces of road and marking 2.5 mm thick centre lines, stop lines, dashes, arrow etc and the like n exc 10 CM wide on roads pavements with hot applied thermo plastic road marking paint of approved colour confirming to BS 3262-1989 with special applicator machine all as per manufacturers instrutions complete all as specified and as directed.

S&F in repairs cat eye solar reflective type of metal body alloy of size 100mm x 100mm x 20mm with PAMA striplens reflector of model No. DA 972.0 fixed with and incl MS stud of suitable size as per manufactures instructions complete all as specified and as directed.

S&F in repairs solar cat eye aluminum alloy shall (100% water proofing design according to 65) of size 125mm x 125mm x 25mm (shank 65mm) of high efficiency Mono rystafie solar panel 2.4V/0.3 watt one NI-ed rechargeable battery (1.2V/1600MA) consisting of super bright LED with 10,000 to 18,000 mcd completed as per manufactures instructions etc. complete all as specified and as directed.

S&F in repairs metal tubular delineator made out of ABS round body fitted with 2 Nos 65 mm dia highly reflective reflectors made out of PMMA and mounted on 45/50 mm dia mild steel pipe of 600 mm height duly powder coated and thermo plastic elastomer 3 bands of green, red and yellow reflector radium tape of 25 mm wide strips with anti theft steel net for reflector protection including embedding in PCC 1:2:4 (150x150x300mm) type B1 complete all as specified and as directed.

S&F in repairs road safety convex mirror of dia 600 to 800 mm made of ABS plastic equipped with adjusting swivel and mounting bracket for infinite adjustment with MS pipe etc complete all as specified and as directed. Note : Frame work shall be measured and paid seperately under respective items of this schedule.

Manufacturing, supplying and fixing in repairs retro reflective informatory road signage board, builidng number etc. made up of 2 mm thick aluminium sheet, face to be fully covered with high intensity and encapsulated lens type heat activated retro reflective sheeting conforming to type - III of ASTMD-4956-01 as approved by Engineer-in-charge, any number of letters/number , dashes , arrows and borders etc. as per IRC : 67-2001 in silver white with blue colour back ground and with high intensity grade, pasted on substrate by pressure sensitive adhesive backing which shall be activated by applying pressure conforming to class II of ASTM-D-4956-01 and fixing the same to the plate of structural frame work by means of suitable sized aluminium alloys, rivets or bolts & nuts @ 300 mm centre to centre all along the periphery as well as in two vertical rows along with theft resistant measures, including the cost of painting with two or more coats of epoxy paint in grey colour on the back side of aluminium sheet including appropriate priming coat. Note :- 1. The dismentling of existing signboard including frame work shall be measured and paid seperately under respective items of this schedule. 2. The frame work around the aluminium sheet including supporting shall also be measure and paid seperately.

Manufacturing, supplying and fixing in repairs retro reflective Mandatory/ Regulatory sign boards of 900 mm diametre with support length of 3750 mm and made up of 2 mm thick aluminium sheet, face to be fully covered with high intensity encapsulated type heat activated retro reflective sheeting conforming to type - IV of ASTM-D 4956-01 in blue and silver white or other colour combination including subject matter, message (bi-lingual), symbols and borders etc. as per IRC ; 67:2001, pasted on substrate by an adhesive backing which shall be activated by applying heat and pressure conforming to class -2 of ASTM-D-4956-01 and fixing the same with suitable sized aluminium alloy rivets @ 20 cm c/c to back support frame of M.S. angle iron of size 25x25x3 mm along with theft resistant measures, mounted and fixed with 2 Nos. M.S. angles of size 35x35x5mm to a vertical post made up to M.S. Tee section ISMT 50x50x6 mm welded with base plate of size 100x100x5 mm at the bottom end and including making holes in pipes, angles flats, providing & fixing M.S. message plate of required size, steel work to be painted with two or more coats of synthetic enamel paint of required shade and of approved brand & manufacture over priming coat of zinc chromate yellow primer (vertical MS-Tee support to be painted in black and white colours). Backside of aluminium sheet to be painted with two or more coats of epoxy paint over and including appropriate priming coat including all leads and lifts etc. complete as per drawing complete all as specified and as directed.

Manufacturing, supplying and fixing in repairs retroreflective Cautionary /warning sign boards of equilateral triangular shape having each side of 900 mm with support length of 3650 mm and made up of 2 mm thick aluminium sheet, face to be fully covered with high intensity encapsulated type heat activated retro reflective sheeting conforming to type - IV of ASTM-D 4956-01 in blue and silver white or other colour combination including subject matter, message (bi-lingual), symbols and borders etc. as per IRC; 67:2001, pasted on substrate by an adhesive backing which shall be activated by applying heat and pressure conforming to class -2 of ASTM-D-4956-01 and fixing the same with suitable sized aluminium alloy rivets @ 20 cm c/c to back support frame of M.S. angle iron of size 25x25x3 mm along with theft resistant measures, mounted and fixed with 2 Nos. M.S.angles of size 35x35x5 mm to a vertical post made up to M.S. Tee section ISMT 50x50x6 mm welded with base plate of size 100x100x5 mm at the bottom end and including making holes in pipes, angles flats, providing & fixing M.S.message plate of required size, steel work to be painted with two or more coats of synthetic enamel paint of required shade and of approved brand & manufacture over priming coat of zinc chromate yellow primer (vertical MS-Tee support to be painted in black and white colours).Backside of aluminium sheet to be painted with two or more coats of epoxy paint over and including appropriate priming coat including all leads and lifts etc. complete as per drawing complete all as specified and as directed.

M&L for Stainless steel (SS) 316 grade any section like tee, angle hollow pipe and square/rectangular tube, flat plates etc as fixed with necessary fittings SS screws, nut, bolts, fastners, washers etc (as approved by Engr-in-charge) including necessary cutting drilling profile, cutting of components to required length/width and shapes/profile and smooth grinding/maching of edges/ faces/all welding joints including buffing and polishing complete all as specified and as directed.

Dismantling wrought iron or mild steel/cast iron work of any description complete all as specified and as directed.

M&L for Framed work such as grills, gratings, angle, square hollow pipe etc., with ends of bars shouldered and/or riveted, or forget into spikes, framed guard bars, barred iron doors, ladders, tracking for steel gates, framed balusters, walk ways, railings, framework of water tanks and similar work conforming to Fe 410-0 complete all as specified and as directed.

S&F mild steel sheet, channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment conforming to Fe 410 -W (Gde- E- 250) quality-A complete all as specified and as directed.

M&L for two coats of synthetic enamel paint over a coat of red oxide zinc chome primer with preparation of new surface of steel and iron work complete all as specified and as directed.

Excavation in post holes in hard/dense soils, each not exc. 0.50 Cum, getting out, returning filling in and ramming earth in layers not exc. 25cm including watering & removing surplus soil to a distance not exc. 50m & making good surface complete all as specified and as directed.

Demolition of cement concrete (un-reinforced) in ground floors and pavings n exc 15 cm thickness (above or below ground level) complete all as specified and as directed.

M&L for Cement concrete 1:3:6 type C2 (using 40mm graded aggregate) as in foundations, filling and mass concrete complete all as specified and as directed.

M&L for continous road edging with factory made pre cast cement concrete blocks (1:3:6 ) using 20 mm grade stone aggregate of any shape and size jointing in cement mortar 1:4 including necessary excavation in hard/dense soil, tamping ground around blocks and removal of surplus soil to a distance not exc 50 metre complete all as specified and as directed.

M&L for two coats of synthetic enamel paint on new concrete or plastered surfaces (as in kerb stones etc) over a coat of primer including preparation of new surface complete all as specified and as directed.

M&L for one coat of synthetic enamel paint on old concrete or plastered surfaces (as in kerb stones etc) including preparation of old surface complete all as specified and as directed.

M&L for re-writing Index hands (natural size) or arrows (upto 40cm long) with synthetic enamel paint complete all as specified and as directed.

M&L for Re-writing letters or figures (Block. Roman, Italic or Indian) n.exc. 30 cm high by using fluorecent paints as approved by GE and complete all as specified and as directed.

Demolition of reinforcement cement concrete of any discription and in any position . Including cutting of reinforcement from adjoining RCC component to faciliate demolition including removal of demolished concrete from site outside MoD land complete all as specified and directed. Note:- All scaffolding & T&P up to three storey building required for demolition/dismantling of RCC shall be part of this item . All Demolished concrete/malba shall be removed same day after cutting of reinforcement from each & every block and same shall be shift from outside cantonment area as directed by Engr in charge and specified complete.

Demolition of cement concrete (unreiforced) of any description and in any position including removal of debrish out of MoD Land all as specified and directed (up to 2 or more story Building) complete all as specified and directed.

M&L brick work using sub class 'B' bricks straight or curved on plan exc 6m mean radius built in CM 1:4 complete all as specified and directed.

M&L for Reinforced cement concrete (nominal mix) in type B-1, 1:2:4 (20 mm graded stone aggregate) as in fins, fascias, slab, louvres, parapets, and railings in height, newels, balustrade, and the like upto three storey building complete all as specified and directed.

M&L for TMT steel bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

S&F 8mm dia TMT bars, cut to length bent to shape require dincluding cranking bending spirally for hoping for columns, chajjas to parapets etc hooking ends and binding with mild steel wire not less than 0.90 mm dia compete all as specified and as directed.

M&L for Formwork to faces of walls, retaining walls, abutments, parapets and staircase railing and similar work including attached pillasters, buttresses, etc.; vertical or to better, upto two storey complete all as specified and as directed.

M&L for formwork to sides and soffits of floor or roof beams, beam haunchings,girders, bressummers, lintels, cantilevers, shelves including sup- ports, overhangs,etc. also splays between floors and beams, etc. complete all as specified and as directed.

Dismantling of brick tiles (laid flat or on edge) on roof surface laid bedded and pointed in any mortar complete and Cutting or uprooting grass/shrubs/sappling etc on old mud phuska, removing rubbish off the premises complete all as specified and as directed.

Demolition of mud in roof in, any thickness, including plastering and leeping upto two storey bldg incl necessary scaffolding arrangement complete all as specified and directed(whether full thickness removed or only a part there of) and removing from cantonment area or complete all as specified and as directed.

M&L for providing cement concrete 1:2:4 type B-1 using 20mm graded stone aggregate in roof kerbs or mud stops, rounded or chamfered and hold fast on edge including necessary form work complete all as specified and as directed.

M&L for plain cement concrete 1:2:4 type B-0 using (12.5 mm graded aggregate) as in roof, padding to maintain the uniform slope or to filling the depression in patches complete all as specified and as directed.

Taking down cement or cement lime plaster, any description, on brick or stone walls, etc including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and as directed.

M&L for 15 mm thick rendering with ready mix plaster (as per manufaturer's instruction) on faces of brick or concrete surfaces finished even and smooth surface wihtout using extra cement on wall of up to four stories bldgs complete all as specified and as directed. Make of ready mix plaster.

M&L for 5 mm thick rendering with readymix plaster (as per manufaturer's instruction) in ceiling or wall on concrete surface finished even & smooth without using extra cement. Notes for Srl item Nos. 35 & 36:- 1. Make of readymix plaster shall be Birla Aerocon/Ultratech Readiplast/ACC Accoplast/Fosroc Chemical (India) Pvt Ltd Renderoc and as approved by GE. 2. The readymix plaster shall be procured directly from the manufacturer or from their authorised dealer. 3 The contractor shall produce original purchase voucher of readymix plaster while claiming RAR/ Final Bill. 4. The Engr-in-Charge shall verify the genuineness of these purchase vouchers before endorcing.

M&L for preparation of newly plastered surfaces of wall/ceiling and applying two coats of weather coat exterior grade over and incl wall care putty to make smooth surface including scaffolding arrangement, trestles, ladders etc upto two storey complete all as specified and as directed.

M&L for chipping of spalled and loose concrete and cleaning rust from re-inforcement by sand blasting scrubbing down conrete sufrace with wire brushes cleaning with water allowed to dry and applying a layer of zinc rich epoxy primer as antirust on all exposed reinforcement followed by a layer of bonding coat of approved epoxy adhesive on complete exposed surfaces of concrete to be gunited all as specified and applying two layess of guniting over steel welded mesh 2mm dia of wire and aperture 75mm,total thickness of gunite n.exc 25mm thick (average thirteen) auth cement mortar 1: 2 using OPC 53 grade cement mixed with polycrete admixture @ 2% by weight of cement or as per manufacturers instructions and finally applying cement plaster over gunite surface of required thickness to give even uniform and smooth finish conforming to proper gerometrics in cement mortar (1:3) to match with the existing surface as in sides and soffits etc of slabs, chajjas, fins, facias, parapets , columns and beams etc complete including necessary scaffolding, shuttering, necessary chases to brick work or RCC members at any height upto 4 storey bldgs all as specified. Note : Steel welded mesh is to be tightening /welding with the existing re-inforcement. The cost of welded mesh is deemed to be included in the unit rate quoted.

Taking down rain water pipe (any size) or pattern incl all fittings, head shoes, bends swan necks etc incl cleaning or re-fixing or removal to store(measured overall as fixed along the centre line over fittings and accessories complete all as specified and as directed.

S&F 110 mm uPVC pipes Type 'A' (for rain water), single socketed, in any length with rubber ring joints, fixed to walls complete all as specified and as directed.

S&F 110 mm uPVC (SWR) Bends/ Tees/ Tapers (any radius), with or without oval access door as required complete all as specified and as directed.

Dismantling of water tanks of any type/pattern not exc 1000 ltr and removing from site of work, complete all as specified and as directed.

M&L for rotational moulded polythylene water storage tanks 1000 litres capacity (tripple layer cylindrical vertical with closed top) hoisted and fixed in position complete all as specified in SSR-I including brass valve high pressure with polythne float and fly nut , tank nipple as required complete, screwd for iron pipe or brass ferrule size 25 mm bore complete all as specified and as directed.

Dismantling of water tanks of any type/pattern not exc 500 ltr and removing from site of work, complete all as specified and as directed.

M&L for rotational moulded polythylene water storage tanks 500 litres capacity (cylindrical vertical with closed top) hoisted and fixed in position complete all as specified in SSR-I including brass valve high pressure with polythne float and fly nut , tank nipple as required complete, screwd for iron pipe or brass ferrule size 25 mm bore complete all as specified and as directed.

Disconnecting existing tanks of capacity 500 litre, setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting at other place as directed and reconnecting , repair if required and re-fixing in position complete all as specified and as directed.

Disconnecting existing tanks of 1000 liter, setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting at other place as directed and reconnecting , repair if required and re-fixing in position complete all as specified and as directed.

Taking up or down 15mm bore steel tubing and connections including cleaning for re-fixing or removal to store complete all as specified and as directed.

Taking up or down 20mm bore steel tubing and connections including cleaning for re-fixing or removal to store complete all as specified and as directed.

S&F 15mm bore GI tubes, medium grade galvanised, with all fittings and fixed complete to walls and ceilings or laid floors or concealed complete all as specified and as directed.

S&F 20mm bore GI tubes, medium grade galvanised, with all fittings and fixed complete to walls and ceilings or laid floors or concealed, complete all as specified and as directed.

Fixing only 15 mm bore GI tubes, medium grade galvanised, with all fittings and fixed complete to walls and ceilings or laid in floors or concealed, complete all as specified and as directed.

Fixing only 20 mm bore GI tubes, medium grade galvanised, with all fittings and fixed complete to walls and ceilings or laid in floors or concealed, complete all as specified and as directed.

Cutting of sapling/bushes including cutting of trunk n.exc 30cm girth and branches and digging out roots from floor or roofs and walls of up to four storied bldg and making good the dismantled portion in cement mortar 1:3 to match the existing surfaces complete all as specified and as directed.

Note:- The contract sum shall be after deducting the amount of Credit shown in Credit Schedule of this Tender.

Chaudhary Constructions

JAIPAL AND BROTHERS

YP INFRA