COMPERHENSIVE REPAIR TO STP PLANT, STP PUMP HOUSES AND ALLIED WORKS AT MIL STN SRI GANGANAGAR.

Amount

Dismantling floor, hearth or wall tiling including cement mortar bedding and rubbish off the premises complete all as specified and directed by Engineer - in - Charge.

Demolition of cement Concrete(un-renforced) in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified and directed by Engineer - in - Charge.

M&L glazed ceramic coloured tiles, (300x600)x7mm thick as on vertical surfaces like dados or skirting over 10mm thick rendering in CM 1:4, set & jointed in neat cement slurry and pointed in white cement mixed with pigment to match the shade of tiles complete all as specified and directed by Engineer - in - Charge.

M&L for non skid coloured ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.11 sqm but not exc 0.18 sqm laid in floor set and jointed in cement slurry including 15 mm thick screed bed or bedding layer of cement mortar 1:4 for laying floor finish even & fair and pointed in white cement mixed with pigment to match the shade of tiles complete all as specified and directed by Engineer - in - Charge.

M&L for 25mm thick cement concrete flooring type B-0 1:2:4 (12.5 mm graded stone aggregate) even & fair finished complete all as specified and directed by Engineer - in - Charge.

M&L for vitrified ceremic tiles light shade (square / rectangular) area of each tile not exceeding 0.36 Sqm in floors etc., set and jointed in neat cement slurry and pointed in white cement mixed with pigment to match the shade of tiles including 15 mm thick screed bed or bedding layer of cement mortar 1:4 for laying floor finish even & fair complete all as specified and directed by Engineer - in - Charge.

All as per Srl item No. 6.0 here in before but on vertical surfaces/skirting dados etc over 10mm rendering in CM 1:4 finished even and fair, complete all as specified and directed by Engineer - in - Charge.

M&L machine cut Kota stone slab flooring 20 mm thick over & including 15 mm thick screed base in cement 1:4, laid and jointed with grey cement slurry mixed with pigments to match the shade of the slabs including rubbing and polishing complete all as specified and directed by Engineer - in - Charge.

All as per Srl item No. 8.0 here in before but on vertical surfaces over 10mm rendering in CM 1:4 finished even and fair, complete all as specified and directed by Engineer - in - Charge.

S&F in repairs fancy type pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure of 15 mm bore diawith or without lettered Hot or cold with long screwed shanks and fly nuts, screwed for iron pipe and fixed complete all as specified and directed by Engineer - in - Charge.

S&F in repairs 15 mm bore dia fancy type chromium plated concealed type stop valves, cast copper aloy with crutch or butterfly handles screwed down high pressure, screwed both ends for iron and fixed complete all as specified and directed by Engineer - in - Charge.

S&F in repairs, stop valves, chromium plated cast screwed down, high pressure copper alloy, with crutch or butterfly handles, screwed both ends for but fancy type 15mm bore iron pipe or complete all as specified and directed by Engineer - in - Charge.

Dismantling water tank capacity exc 250 Ltr and n exc 1000 ltr complete all as specified and directed by Engineer - in - Charge.

S&F rotational moulded polyethylene water storage tank 500 ltrs capacity three layered white colour (Cylindrical vertical with closed top) hoisted and fixed in position and including 20mm bore PTMT ball valve, high pressure with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe or brass ferrule (minimum weight 210gms) complete all as specified and directed by Engineer - in - Charge.

S&F rotational moulded polyethylene water storage tank 1000 ltrs capacity three layered white colour (Cylindrical vertical with closed top) hoisted and fixed in position and including 25mm bore PTMT ball valve, high pressure with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe or brass ferrule (minimum weight 455gms) complete all as specified and directed by Engineer - in - Charge.

S&F in repairs 20mm bore PTMT ball valve, high pressure with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe or brass ferrule (minimum weight 210gms) complete all as specified and directed by Engineer - in - Charge.

S&F in repairs 25mm bore PTMT ball valve, high pressure with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe or brass ferrule (minimum weight 455gms) complete all as specified and directed by Engineer - in - Charge.

Dismantling cast iron pipe of any dia, jointed in cement mortar and taking out required complete all as specified and directed by Engineer - in - Charge.

S&F 100mm bore cast iron sand cast soil, waste and vent pipes, in any length with or without ears, with cement joints, fixed to walls complete all as specified and directed by Engineer - in - Charge.

S&F 75mm bore cast iron sand cast soil, waste and vent pipes, in any length with or without ears, with cement joints, fixed to walls complete all as specified and directed by Engineer - in - Charge.

S&F 100mm bore cast iron bends sand cast (any radius), diminishing pieces or tapers (larger bore measured) fitted with oval access door complete all as specified and directed by Engineer - in - Charge.

S&F 100mm bore cast iron 'Y' tee sand cast fitted with oval access door complete all as specified and directed by Engineer - in - Charge.

M&L in repair for CI floor trap 100 mm with anti cockroaches grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) complete all as specified and directed by Engineer - in - Charge.

M&L in repair for CI floor trap 75mm with anti cockroaches grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) complete all as specified and directed by Engineer - in - Charge.

Taking down eaves gutters and rain water pipes (any size or pattern) including all fittings, heads, shoes, bends, swan – necks, etc. including cleaning of any description complete all as specified and directed by Engineer - in - Charge.

M&L bands straps supports or stays for rainwater ventilating pipes including bolts confirming to Fe 290 Gde E-165 complete all as specified and directed by Engineer - in - Charge.

S&F 110mm bore PVC (SWR) rain water pipe single socketed in any length with rubber ring joints, jointed with solvent joint fixed to wall complete all as specified and directed by Engineer - in - Charge.

S&F 110mm bore PVC (SWR) bends any radius complete all as specified and directed by Engineer - in - Charge.

S&F in repair PVC connections 15 mm size with PTMT nuts of length 450 mm complete all as specified and directed by Engineer - in - Charge.

S&F water closet vitreous china squatting pan "Orrisa pattern" size 580mmx440mm white with integral foot rests (Excl flushing cistern) including all joints and making good to the floor complete all as specified including CI 'P' trap/S trap complete all as specified and directed by Engineer - in - Charge.

S&F in repairs, PVC low level flushing cistern 10 lirs capacity, valve-less, syphonic action type, white, with inlet, ball valve, float, and handle including brackets, PVC connections 15 mm size with PTMT nuts of length 450 mm ,including 32mm bore flush pipe of polyethylene of low or high density of PVC complete all as specified and directed by Engineer - in - Charge.

S&F, in repairs vitreous china wash hand basin, white flat back of size 550mmx400mm including brackets, 32mm bore brass chromimum plated waste coupling & 32mm bore low density ployethylene (LDPE) flush pipe of pressure rating 6Kgf/Sq cm (1.00 M long) complete, including 15mm bore dia cast copper alloy chromium plated pillar taps and 15mm bore 450 mm length PVC connection with PTMT nuts complete all as specified and directed by Engineer - in - Charge.

S&F in repairs low density polyethylene pipes (LDPE) 32 mm dia and 1000 mm long of pressure rating 6 kgf/cm2 fixed complete to walls, ceilings or in floors complete all as specified and directed by Engineer in charge.

S&F in repairs floor door stopper of aluminium alloy body and tongue, anodised with hard drawn steel spring fixed in floor and overall length of cover plate 140 mm complete all as specified and directed by Engineer in charge.

Taking up or down for 20mm bore steel water tubing galvanised with connection including cleaning for refixing complete all as specified and directed by Engineer - in - Charge.

Taking up or down for 15 mm bore steel water tubing galvanised with connection including cleaning for refixing complete all as specified and directed by Engineer - in - Charge.

S&F steel water tubing galvanised 15mm bore, “medium grade” with all fittings and fixed to walls and ceiling or in floor complete all as specified and directed by Engineer - in - Charge.

All as per Srl item No. 38 here in before but fixing with new fittings only complete all as specified and directed by Engineer - in - Charge.

S&F steel water tubing galvanised 20mm bore, “medium grade” with all fittings fixed to wall and ceiling or in floor complete all as specified and directed by Engineer - in - Charge.

All as per Srl item No. 40 here in before but fixing with new fittings only complete all as specified and directed by Engineer - in - Charge.

S&F in repairs,fancy types bib taps,15 mm bore cast copper alloy, with crutch or butterfly handles, screwed down, screwed for iron pipe or brass ferrule for 15mm bore complete all as specified and directed by Engineer - in - Charge.

S&F in repairs Plastic water closet seat, back, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device complete all as specified and directed by Engineer in charge.

S&F in repair vitreous china wash down water closet pan (Pedstal pattern), white excluding fixing bolts, flushing cistern and flush pipe, including plastic water coset seat, black cosed pattern with flat bottom, and cover and mild steel chromimum plated hinging device & trap complete all as specified and directed by Engineer - in - Charge.

S&F in repairs chromium plated shower rose of any colour with or without swivel joints 125mm size including shower arm complete all as specified and directed by Engineer - in - Charge.

S&F in repairs Stainless steel soap dish of any size fixed with screws complete complete all as specified and directed by Engineer - in - Charge.

S&F in repairs grating doom 100 mm dia of stainless steel with and without hole complete all as specified and directed by Engineer - in - Charge.

S&F in repairs vitreous china urinals, full stall type flat back size of complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60 mm long brass screws, pointing around urinal back in cement, fixing automatic flushing cistern with brackets, flush pipe grating and union for discharge pipe including waste pipe and trap complete all as specified and directed by Engineer - in - Charge.

Taking down shutters exc 1 sqm but n.exc 2sqm of any description & after repairing refixing in same opening complete all as specified and directed by Engineer - in - Charge.

Taking down chowkhats or frames (without taking off shutters from the frames) exceeding 1.5 Sqm but not exceeding 4 sqm each complete all as specified and directed by Engineer - in - Charge.

Taking down shutters of any description exceeding 1 Sqm but not exceeding 2 sqm each complete all as specified and directed by Engineer - in - Charge.

Taking down chowkhats or frames (without taking off shutters from the frames) not exceeding 1.5sqm each complete all as specified and directed by Engineer - in - Charge.

S&F Aluminium frame for doors, window, ventilators with one or more rebates including joining cleat for fixing etc complete with powder coating on Aluminium minium thickness of powder coating 50 micron as per the specification the top and bottom horizontal members and vertical members adjacent walls shall be fixed with floor, ceiling walls and cills where required and fixing with the help of rawl plug and screw or with fixing clip or with expansion hold plate fasteners . Aluminium section shall be smooth, rust free, straight mitred and jointed mechanically where ever required complete all as specified and directed by Engineer - in - Charge.

S&F Aluminium window and ventilator shutters, fixed type without sash bar, aluminum section weighing 0.55 Kg/m including necessary joining cleats, glazing clips, ruber neoprene packing, powder coated aluminium snap beading screws, powder coated aluminium fitting such as hinges type B-21 100 mm size (2 Nos), suitable handle (2 Nos) of any colour (thickness of powder coating not less than 50micron) etc complete all as specified and directed by Engineer - in - Charge.

S&F stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40mm complete all as specified and directed by Engineer - in - Charge.

S&F Aluminum Grill any pattern aperture size 75X75 mm and wire dia 5 mm fixed with Aluminum Frame complete all as specified and directed by Engineer - in - Charge. Note- Aluminum frame shall be Measured and paid seperately

S & F pressed steel door frames with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc., size of frame 125x60mm complete all as specified and directed by Engineer - in - Charge. Note : Mild steel sheet shall be 1.25mm thick

S&F 100 mm Butt hinges stainless steel medium grade with galvanised mild steel hinge pin anodised and fixed type C-21 complete all as specified and directed by Engineer - in - Charge.

S&F mild steel butt hinges “medium weight” 100mm long cold rolled mild steel complete all as specified and directed by Engineer - in - Charge.

S & F hasp and staple, safety type stove enameled black, of mild steel 100mm size complete all as specified and directed by Engineer - in - Charge.

M&L Cement concrete 1:2:4 type B–0(12.5 mm graded stone aggregate) filling of pressed steel frame and hold fast blocks etc complete all as specified and directed by Engineer - in - Charge.

S&F in repairs stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40 mm complete all as specified and directed by Engineer - in - Charge.

M&L in repairs for mild steel work as in frame work/guard bar for door and window and cooler stand and as similar work including cutting tops to shape, drilling holes, notching for wire etc conforming to Fe-290 grade E-165 complete all as specified and directed by Engineer - in - Charge.

Hacking out old broken glass (any thickness, size, quality or description) from metal frames, including punching or drilling out old glazing pins / spring clips and glazed with oil putty complete all as specified and directed by Engineer - in - Charge.

S&F 3mm thick sheet glass ordinary quality and glazing with oil putty in square n exc 0.5 sq. m each pane of any size complete all as specified and directed by Engineer - in - Charge.

S&F 4 mm thick sheet glass ordinary quality and glazing with oil putty in square n exc 0.5 sq. m each pane of any size complete all as specified and directed by Engineer - in - Charge.

S&F 4 mm thick figured glass ordinary quality and glazing with oil putty in square n exc 0.5 sq. m each pane of any size complete all as specified and directed by Engineer - in - Charge.

S&F in repairs 5.5 mm thick sheet glass ordinary quality and glazing in square n exc 0.5 sq. m each pane of any size complete all as specified and directed by Engineer - in - Charge.

M&L for welding of steel work & repairs to steel windows, handles, butt hinges, tower bolt and other steel work of any type & size complete all as specified and directed by Engineer - in - Charge.

S&F in repairs mortice brass lock vertical type 4 levers size 100 mm complete all as specified and directed by Engineer - in - Charge.

S&F in repairs Aluminium extruded body door closure hydraulically regulated, designation No 3 universal type suitable for door shutters of any size complete all as specified and directed by Engineer - in - Charge.

S & F in repairs aluminium handles cast type anodised, 100mm long complete all as specified and directed by Engineer - in - Charge.

S& F in repairs aluminium anodised barrel tower bolts of extruded section and fixed 100 mm size complete all as specified and directed by Engineer - in - Charge.

S&F in repairs 150mm Extruded aluminium alloy handles fabricated type complete all as specified and directed by Engineer - in - Charge.

S&F in repairs 300 mm long mild steel sliding door bolts, clip type, stone enameled block with bright bolt not less than 12mm dia with and incl a minimum of 6 bolts and nuts, 4 on bolt plate 2 on staple plate complete all as specified and directed by Engineer - in - Charge.

S&F in repairs HDPE lid cover for water tank of capacity 500 Ltr & 1000 Ltr complete all as specified and directed by Engineer - in - Charge.

S & F in repair stainless steel tubular towel rail 20mm dia “D” type 60 cm long between flanges including brackets complete all as specified and directed by Engineer - in - Charge.

S & F for 35mm thick factory made gauged skelton shutters open rebated and prepared to receive gauze etc edges of framing plain, chamfered or rounded fitted with cut and mitred beady for receiving gauze etc of 35mm thick and door for Iind class hard wood rail and style as specified in SSR Part-I Section 8, cluase 8.24(a) and complete all as specified and directed by Engineer - in - Charge.

S & F for 35mm thick factory made IInd class hard wood Plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS: 1003 (Part I), kiln seasoned and chemically pressure treated complete all as specified and directed by Engineer - in - Charge.

M&L for preparation of surfaces of new wooden Surfaces of any description over 10 cm width or girth and applying two coat of synthetic enamel paint over one coat of pink primer complete all as specified and directed by Engineer - in - Charge.

M&L for 75mm thick Cement concrete type C-2 , 1:3:6 (40 mm graded aggregate) as in plinth protection laid in alternate bay n.exc 2.5m length including necessary formwork complete all as specified and directed by Engineer - in - Charge.

M&L for 75mm thick Cement concrete type C-2 , 1:3:6 (40 mm graded aggregate) as in sub base of floor complete all as specified and directed by Engineer - in - Charge.

M&L for Sand filling under floors or in foundations including watering and consolidation complete all as specified and directed by Engineer - in - Charge.

M&L for Machine pressed precast concrete interlocking paver block any shape and sze confirming to IS 15658-2006 of 60mm thickness, M-35 grade with grey cement and pigment complete all as specified and directed by Engineer - in - Charge.

M&L for cement concrete type B-1, 1:2:4 (using 20mm graded aggregate ) in roof kerbs or mud stops, rounded or cmamfered on edges complete all as specified and directed by Engineer - in - Charge.

M&L Chequered cement concrete tiles with grey cement and no pigments 20cmx20cmx25 mm thick, set , jointed and pointed in neat cement slurry in floors laid over including Screed bed or bedding layer of mortar 15 mm thick in CM 1:4 for laying floor finishes complete all as specified and directed by Engineer - in - Charge.

Taking down cement plaster of amy description on bricks or concrete surfaces of walls including racking out joints, hacking for keys scrubbing down with water etc. complete all as specified and directed by Engineer - in - Charge.

M&L 15mm thick, rendering in cement mortar 1:6 to brick/concrete wall surfaces finished even and smooth without using extra cement complete all as specified and directed by Engineer - in - Charge.

M&L 15mm thick, rendering in cement mortar CM 1:4 to brick/concrete wall surfaces in two layers first layer 10mm thick and second layer 5mm thick with WPC 3% by wt of cement finished even & smooth without using extra cement complete all as specified and directed by Engineer - in - Charge.

M&L 5mm thick, rendering in cement mortar 1:3 to ceiling surfaces on patches finished even and smooth without using extra cement in patches complete all as specified and directed by Engineer - in - Charge.

M&L two coats of Acrylic emulsion on newly pastered wall surfaces over one coat of chalk whiting including preparation of surfaces complete all as specified and directed by Engineer - in - Charge.

M&L two coats of acrylic emulsion on new plastered surfaces of ceiling including preparation of surfaces complete all as specified and directed by Engineer - in - Charge.

M & L two coats of acrylic emulsion on old decorated plastered wall surface with complete removal of existing treatment of walls removing all dirt and dust by watering making surface even and smooth including preparation of surfaces by applying one coat of wall care putty complete all as specified and directed by Engineer - in - Charge.

M&L two coats of acrylic emulsion on old decorated surfaces of ceiling including preparation of surfaces by brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots complete all as specified and directed by Engineer - in - Charge.

M&L two coats of cement base paint on old decorated surfaces of walls including preparation of surfaces by brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots complete all as specified and directed by Engineer - in - Charge.

M & L for applying two coats of Premium Acrylic Smooth exterior paint (Apex) with silicone additives on external wall surfaces as per manufacturers instruction complete all as specified and directed by Engineer - in - Charge.

S & F of Fiberways Brand or equivalent Fiber Glass Reinforced plastic (FRP) Door Frames of three legged of cross section 90mmx45mm having single rebate of 32mmx45mm having single rebate of 32mmx15mm to receive shutter of 30 mm thickness. The laminate door frame molded with fire retardant grade unsaturate polysterresinn and chopped mat.Doorframe laminate shall be 2 mm thick and shall be filled with suitable wooden black in all the three legs. The frame shall be covered with fiberglass from all sides MS stay shall be provided at the bottom to steady the frame.complete all as specified and directed by Engineer - in - Charge.

S & F of fiberways brand 30mm thick glass fiber reinforced plastic (FRP) paneled door shutter of required color and approved brand and manufacture made with fire retardent grade unsaturated polyster resin moulded to 3mm thick FRP laminated for forming hollow rails and style with wooden frame and suitable blocks of seasoned wood inside at required places for fixing of fittings cast monolithically with 5mm thick FRP laminate for panels for conforming to IS:14856-2000 complete all as specified and directed by Engineer - in - Charge.

S&F in repairs Safety lever locks mild steel with 4 levers for rolling shutters complete all as specified and directed by Engineer - in - Charge.

S& F in repairs Ball Bearing for rolling shutters complete all as specified and directed by Engineer - in - Charge.

M&L for repairing of rolling shutter area exc 5.0sqm but n.exc 10.0sqm including replacement of damaged part of shutter like ball bearing, top cover anchoring rod, hasp and staples complete all as specified and directed by Engineer - in - Charge.

S&F in repairs factory made for 1.25mm thick Steel rolling shutters , without ball bearing , as specified including top cover , anchoring rod, hasp and staple and one shop coat of primer;erected in position as indicated, complete ; gear operated type with bevel gear box and crank handle complete all as specified and directed by Engineer - in - Charge.

M&L for Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I.S 1161-1979 grade St. 240 complete all as specified and directed by Engineer - in - Charge.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed by Engineer - in - Charge.

Dismantling Asbestos cement ( corrugated, semicorrugated ,etc.) sheets in roof coverings complete all as specified and directed by Engineer - in - Charge.

S&F Pre-painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws complete all as specified and directed by Engineer - in - Charge.

S&F for Pre-painted galvatume aluminum zinc coating GI based plain steel sheet (ridge) 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws complete all as specified and directed by Engineer - in - Charge.

M&L two coats of synthetic enamel over a coat of red oxide primer exc 10 cm width /girth on new steel surfaces including preparation of surfaces complete all as specified and directed by Engineer - in - Charge.

S&F mild steel screw bolts (machine made) with hexagonal or square head at one end, screwed end to be fitted with washer and one hexagonal/ square nut not exceeding 5cm long complete all as specified and directed by Engineer - in - Charge.

S&F in repair fancy type SS curtain rod 25 mm dia with brackets knob rings(20 cm c/c) etc complete all as specified and directed by Engineer - in - Charge.

S&F in repair MS peg stay for steel window, size 300mm with hinged joint and two plates, with studs complete all as specified and directed by Engineer - in - Charge.

S&F in repair MS handle for steel window, with left-right combination complete all as specified and directed by Engineer - in - Charge.

Dismantling of brick work built in cement mortar of any description complete all as specified and directed by Engineer - in - Charge.

M&L brick work with fly Ash old size Bricks, straight or curved on plan exceeding 6 mtr mean radius built in CM 1:6 complete all as specified and directed by Engineer - in - Charge.

Disconnecting existing tanks exc 500 ltr but n.exc 1000 ltrs, setting aside (or lowering of required) for repairs or cleaning and hoisting, reconnecting and refixing in position including Cleaning and removing all scale and dirt etc from tanks and from mouths of circulating pipes, etc complete all as specified and directed by Engineer - in - Charge.

Dismantling posts or struts (wood, steel or R.C.C.) any section, including taking out embedded portion and making good disturbed ground complete all as specified and directed by Engineer - in - Charge.

M&L PCC 1:3:6 (40mm graded stone aggregate) type C2, in foundation of posts and struts complete all as specified and directed by Engineer - in - Charge.

M&L mild steel work i.e. Angle iron/flat iron as in post and struts in fencing including cutting tops to shape, drilling holes, notching for wire etc conforming to Fe-290 grade E-165 complete all as specified and directed by Engineer - in - Charge.

S&F 10 mm dia MS round bar for fixing of chain link fencing with post complete all as specified and directed by Engineer - in - Charge.

Supply only chain link fencing galvanised mild steel hot dipped(IS -2721) of any dia and size of mesh size complete all as specified and directed by Engineer - in - Charge.

Dismantling fencing wire mesh any type complete all as specified and directed by Engineer - in - Charge.

Fixing only of chain link fencing including above galvanised mild steel to any type of standard rails vision of binding wire complete all as specified and directed by Engineer - in - Charge.

Excavation in trenches in soft/loose soil & getting out in n.exc. 1.5m wide & n.exc. 1.5m in depth for foundation etc n.exc 10 sqm on plan and n.exc. 1.5m in depth in soft/loose soil and getting out complete all as specified and directed by Engineer - in - Charge.

Returning, filling in, including spreading, levelling watering and well ramming in layers n.exc. 25cm in soft/loose soil complete all as specified and directed by Engineer - in - Charge.

Removing excavated material n.exc. 50m & depositing where directed at a level n.exc. 1.5m above the starting point complete all as specified and directed by Engineer - in - Charge.

Removing vegetations/bushes/foreign materials etc at STP sweage pump houses etc throwing the wastage at a distance not less than 50mtr as and where complete all as specified and directed by Engineer - in - Charge. Note - T&P and safety equipment required for the work is to be provided by the contractor.

S&F in replacement 25mm bore Stop valves cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed by Engineer - in - Charge.

S&F in replacement 40mm bore Stop valves cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed by Engineer - in - Charge.

Taking up or down steel tubing and connections of size 40mm bore complete all as specified and directed by Engineer - in - Charge.

Taking up or down steel tubing and connections of size 25mm bore complete all as specified and directed by Engineer - in - Charge.

M&L for galvanized steel water tubing medium grade of 25mm bore with & including all fittings complete, fixed to walls and ceilings or laid in floors complete all as specified and directed by Engineer - in - Charge.

M&L for galvanized steel water tubing medium grade of 40mm bore with & including all fittings complete, fixed to walls and ceilings or laid in floors complete all as specified and directed by Engineer - in - Charge.

Supply only gland packing rope size 10mm complete all as specified and directed by Engineer - in - Charge.

Supply only gland packing rope size 11mm complete all as specified and directed by Engineer - in - Charge.

Supply only gland packing rope size 12mm complete all as specified and directed by Engineer - in - Charge.

M&L boaring of size upto 80mm under pathways/roads suitable for laying of pipeline of size upto 80mm complete all as specified and directed by Engineer - in - Charge.

Note :(i) Amount of credit for retrieved materials is mentioned in Sch 'A' Section-II of tender documents in pdf form which will be deducted while acceptance of tender offline.

AYUSH BUILDERS

PAREEK AND COMPANY