REPAIR TO JOINERY, TILES, EXTERNAL WALL, PLASTER, CHAJJAS, SANITARY FITTINGS, RAIN WATER PIPES AND REPAIRS TO SUNKEN FLOORS INCLUDING LEAKAGE/ SEEPAGE AT CERTAIN BUILDINGS IN OTHER THAN MARRIED ACCOMMODATION AT VAYUSENA NAGAR, NAGPUR

Amount

Taking down chowkats or frame with shutter (without taking out shutter from the frame) not exceeding 1.50 sqm each and removal from site complete all as specified and directed.

All as per item No 1 above but 1.50 sqm and n exc 4.00 sqm each

Taking down of shutters of any description exc 1.00 Sqm but n. exc 2 Sqm each complete all as specified and directed.

Supply and fixing factory made solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet, reinforced with MS square tube fixed in opening complete as per manufacturer's specifications complete all as specified and directed.

Supply and fixing 30 mm thick factory made solid panel PVC door shutter conferming to criteria of testing as per IS : 4020, consisting of frame made out of MS tube of 19 guage thickness & size 19x19mm for stiles and 15x15mm for top & bottom rails MS frames shall have a coat of red oxide primer of approved make and shall be covered with 5mm thick heat moulded PVC `C' channel of size 30x50mm forming styles and 5mm thick 75mm wide PVC sheets for top rail lock rail and bottom rail on either side and 10mm (5mmx2) thick 20mm wide cross PVC sheet as gap insert for top rail and bottom rail panelling of 5 mm thick PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rail with 30 mm wide x 5 mm thick PVC sheet beading on either side and joined together with solvent cement, adhesive and an additional 5 mm thick PVC strip of 20 mm width is to be struck on the interior side of 'C' channel using PVC solvent adhesive complete as per manufacturers specifications & drawings ass as directed by Engineer-in-Charge.

Supply and fixing plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, supplied and fixed in 2nd class hardwood complete all as specified and directed.

Supply and fixing glazed/wire gauged/skeleton shutter 35 mm thick out of (well kiln seasoned) 2nd class hard wood (hollock) the size of rails and style as per IS chemically pressure treated in factory gainst termite infestation prepared to receive wire gauge (without sash bars) edges of frame chamfered or rounded fitted with cut and mitered beads complete all as specified and directed. Note : Wire gauge/glazing to be measured and paid separately.

Supply and fixing factory made 35 mm thick plain, framed, panelled shutter (two panel) with lock rail using 2nd class HW (Hollock) kiln seasoned andchemically pressure treated the size of rail and style as per IS 1003 (Part-I) and panel insert of 9mm thick BWP commercial facing plywood or12mm veneered particle boards with commercial ply complete all as specified and directed.

Supply and fixing of 30 mm thick flush shutters, solid core construction, with block board core and ply wood face panels, commercial type on both sides complete all as specified and as directed.

Material and labour for preparation of new wood base surfaces applying one coats of pink primer and two coats of synthetic enamel paint (ordinary tint) of any description, over 10 cm in width or girth, not otherwise described complete all as specified and as directed.

Supply and fixing stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples complete all as specified and as directed.

Taking down of shutters of any description exc 1 Sqm and n. exc 2 sqm each and refixing in same opening after resecuring or easing & adjusting etc complete all as specified and as directed.

Supply and fixing in repair stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples complete all as specified and as directed.

Supply and fixing for 100mm long mild steel butt hinges, heavy weight cold rolled mild steel and fixed complete all as specified and as directed.

Supply and fixing 150 mm long aluminium anodised handles, cast type complete all as specified and as directed.

Supply and fixing for 150 mm long aluminium, anodised, barrel tower bolts of extruded section and fixed complete all as specified and as directed.

Supply and fixing 300 mm long aluminium alloy, anodised, sliding dooor bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy complete all as specified and as directed.

Supply and fixing for 200 mm long Aluminium, anodised, barrel tower bolts of extruded section and fixed complete all as specified and as directed.

Supply and fixing mild steel 300 mm ordinary rat tail rod pattern springs including roller & rooler plate complete all as specified and as directed.

Supply and fixing floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor overall length of cover plate 140mm complete all as specified and as directed.

Supply and fixing in repairs of harrison rail mild steel chromium plated of 25mm dia for curtain rod fixed with two number of brackets, stops for each rail complete all as specified and as directed.

Supply and fixing powder coated anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc complete all as specified and as directed.

Material and labour for powder coated anodised aluminium door shutters, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc complete all as specified.

Supply and fixing powder coated anodised aluminium window and ventilator shutters, fixed/sliding type without sash bar, aluminium section weighing not less than 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc. complete all as specified.

Supply and fixing in repair of double action floor spring hydraulically regulated made up of minium 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed.

Supply and fixing mild steel 4 levers mortice lock, vertical type, size 100 mm complete all as specified and as directed.

Supply and fixing in repairs door closer hydraulically regulated, designation No 3, aluminium (die cast ) body, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 Kg and fixed including taking down old one all as specified and directed.

Hacking out old broken glasses any thickness, size, quality or description from wooden frames glazed with putty or fixed with bead complete all as specified and as directed.

Supply and fixing sheet glass, ordinary quality (tinted/plain as directed) in square but exc 0.50 Sqm each pane, 5.5 mm thick fixed to aluminium section complete all as specified and as directed.

All as per item No 29 above but 4 mm thick

Taking down of old toughened glass door/partition of any type exc 1.50 sqm but n.exc 3.00 sqm each and re-fixing the same after necessary repair, tighten loose parts and replacement of damaged parts/accessories like brackets, top hinged, clips, roller, screws etc but excluding double action floor spring complete all as specified and as directed.

Taking down old MS window shutter not exceeding 1 sqm each including cutting old hinges and refixing in same opening after necessary repair work and changing MS hinges of any type including welding to old frame complete all as specified and as directed.

Supply and fixing 12mm thick toughened glass as in hinged doors, partitions, automatic doors and similar work with all necessary fittings like top and bottom brackets, two numbers of stainless steel handle as appropriate size for each shutter, stainless steel locking arrangement including cutting to shape, drilling holes required etc alongwith all necessary fittings (but excluding double action floor spring) complete all as specified and as directed.

Supply and fixing factory made uPVC white colour casement door with 3D hinges made of (big series) frame 67 x 64 mm & sash 67 x 110 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension, comprising of uPVC multi-chambered frame, sash and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, zinc alloy (white powder coated) 3D hinges and one handle on each side of panels along with zinc plated mild steel multi point locking having transmission gear, cylinder with keeps and one side key, G.I. fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws, etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality complete all as specified and directed by Engineer-in Charge. (Glass shall be paid separately) Note: For uPVC frame, sash and mullion extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made.

Supply and fixing factory made uPVC white colour three track three panels sliding window with fly proof S.S wire mesh (Two nos. glazed & one no. wire mesh panels) upto 1.50m height made of (big series) frame 116 x 45 mm & sash 46 x 62 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension, comprising of uPVC multi chambered frame, with inbuilt roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, complete all as specified and directed by Engineer-in-Charge. (Glass or wiremesh shall be paid separately) Note: For uPVC frame and sash extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made.

Dismantling wrought iron or mild steel work of any description not otherwise provided for all as specified and as directed.

Material and labour mild steel frame work such as gates, grills with ends of bar shouldered, welded or forged into spikes conforming to Fe 410-0 all as specified and as directed.

Material and labour for preparing new surfaces of steel of any description not otherwise described over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer all as specified and as directed.

Dismantling of wall and celling board (fiber, pulp, insulation, etc) or insulation board / slabs/ blankets, any thickness, including cover fillets all as specified and directed.

Material and labour for providing 10mm thick Plaster of Paris (POP) false ceiling (gypsum anhydrous) to flat or curved surface as per design approved over GI frame work for seamless ceiling comprising of GI perimeter channel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with GI cleat and steel expansion fasteners with and including ceiling section (of any length) of 0.55 mm thickness having curled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre all as per manufacturer’s instructions including two coats of oil bound distemper over a coat of primer over a coat of putty complete all as specified.

Material and labour for exposed metal frame ceiling with non asbestos fibre cement building boards of 4mm thick of 600mm x 600mm size fixed or laid / inserted to GI framework with appropriate numbers of hangers with screws complete all as specified and as directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed.

Demolition of cement concrete (unreinforced) in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified and as directed. Note : - All demolished items/ debris to be removed out side of MoD land.

Material and labour for 25 mm thick cement concrete type B-0, 1:2:4 (12.5 mm graded aggregate) as on floor complete all as specified and as directed.

Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust etc complete all as specified and as directed.

Demolition of cement concrete (unreinforced) of any description and in any position not otherwise specifically provided for complete all as specified and as directed. Note : - All demolished items/ debris to be removed out side of MoD land.

Material and labour for premium quality non-skid ceramic coloured tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 Sqm but not exceeding 0.11 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match with the tiles including 15 mm thick screed bed 1:6 all as specified and directed.

Material and labour for premium quality digital glazed ceramic coloured tiles of approved quality ISI marked (450 X 350 X 7 mm / 450 x 300 x 7 mm / 600 x 300 x 7 mm thick) as in vertical surfaces such as skirting dados etc set jointed in neat cement slurry and pointed in coloured cement to match with the tiles including 1:4 cement plaster 10 mm thick on brick work and concrete surface complete all as specified and directed.

Material and labour for any shade/double charged/ultracharged vitrified tiles 10 mm thick (square/ rectangular) polished area of each tiles exc 0.42 sqm but not exceeding 1.00 sqm in floors, parking etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match in dark shade including 15 mm thick screed bed in CM 1:6 complete all as specified and directed.

Material and labour for any shade/double charged/ultracharged vitrified tiles 10 mm thick (square/ rectangular) polished area of each tiles exc 0.42 sqm but not exceeding 1.00 sqm on vertical surfaces such as skirting, dado, risers to steps etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade including 10 mm thick rendering in cm (1:4) as in back coat complete all as specified and as directed.

Material and labour for vitrified ceramic tiles of dark shade 8-9 mm thick (square/ rectangular) polished, area of each tile not exceeding 0.36 Sqm as in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match with the tiles including 15 mm thick screed bed in cement mortar 1:6 complete all as specified and directed.

Material and labour vitrified ceramic tiles of dark shade 8-9 mm thick (square/ rectangular) polished, area of each tile not exceeding 0.36 Sqm as in skirting/dado etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match with the tiles including 10 mm thick plaster in cement mortar 1:4 complete all as specified and directed.

Dismantling of stone slab and tiles of any description or thickness in floors, aprons etc laid, bedded and pointed in any mortar complete all as specified and directed.

Material and labour for 18-20 mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like incl 15 mm thick screed bed in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed.

Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and similar situations complete all as specified and directed.

Taking down or up 15 mm bore galvanised iron tubing and connection including cleaning for refixing or removal all as specified.

All as per item no 57 above but 20 mm bore

Supply and fixing GI tubing medium grade with all fitting and fixed to walls & ceilings or laid in floors, bore of pipe 15 mm complete all as specified and directed.

All as per item No 58 above but 20 mm

Dismantling water tanks and removing to store (capacity exc 250 & n exc 500 ltrs) complete all as specified and directed.

All as per item No 60 above but 500 ltr but n exc 1000 ltrs.

Supply and fixing 500 ltr capacity rotational moulded polyethylene water storage tanks with all fittings of GI (cylindrical vertical with closed top) hoilsted and fixed in position complete all as specified and directed.

All as [petr item No 62 above but 1000 ltrs capacity

Supply & fixed in repairs 20 mm bore brass ball valves, high pressure with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed complete all as specified and directed.

Supply & fixed in repair 20 mm bore gun-metal globe or gate valves, with iron wheel head, screwed both ends for iron pipe and water tank niple fixed complete all as specified and directed.

Supply and fixing in repair chromium plated fency type stop cock/angular cock (Weight not less than 575 gms), cast copper allay, screwed down, high pressure with crutch or butterfly handle screwed both ends for iron pipes 15mm bore complete all as specified and directed.

All as per item No 66 above but fixing only in repairs

Supply and fixing in repair 15mm bore chromium plated concealed type stop valves (Weight not less than 575 gms), cast copper alloy, screwed down, high pressure with crutch or butterfly handle screwed both ends for iron pipes complete all as specified and directed.

Supply and fixing in repairs chromium plated 125 mm long shower rose with or without swivel joints, any size, incl fixing to steel pipe or union as .

All as per item No 69 above but fixing only in repairs

Supply and fixing in repair 15 mm bore chromium plated fancy type bib taps, (Weight not less than 575 gms), cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed.

All as per item No 71 above but fixing only in repairs

Supply and fixing in repair PVC connection 15 mm size with PTMT nuts of length 450 mm of approved quality complete all as specified and directed.

Supply and fixing in repair soap dish brass chromium plated decorative type approximate size 160 x 90 mm complete all as specified and directed.

All as per item No 74 above but fixing only in repairs

Supply and fixing sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and directed.

All as per item No 76 above but fixing only in repairs

Supply and fixing brass chromium plated tubular towel rail, 20mm dia, D type, 60cm long between flanges fixed with wall complete all as specified and directed.

All as per item No 78 above but fixing only in repairs complete all as specified and directed.

Supply and fixing in repairs vitreous china wash down water closet pan (padestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe) including plastic water closet seat (white or black in colour) , closed pattern with flat bottom, and cover and mild steel chromiuum plated or cluminised hinging device also making good to floor complete all as specified and directed.

Supply and fixing in repair rimless single piece WC with UF soft close slim seat cover, hinges, dual flush cistern fitting, fixing accessories and accessories set of size 380x670x765 mm complete all as specified and directed. Make - Jaquar, Model No FSS-WHT-29853500UFSM or equivalent in CERA/ Hindware/ Kohler

Supply and fixing in repair Plastic water closet seat cover, black/white, closed pattern with flat bottom, and cover and mild steel chromoium plated or aluminised hinging devices complete all as specified and as directed.

Supply and fixing in repairs vitreous China squatting pan of Orrissa pattern of approved make of size 580 mm X 440 mm white with integral foot rests (excluding flushing cistern and flush pipe) including trap set in and including concrete and connection to flushing pipe incl lime concrete bedding and connection to antisyphonage pipe etc including making good to floor complete all as specified and as directed.

Supply and fixing in repair PVC low level cistern of 10 lit capacity inclusive of brackets and PVC bend long type and connectin to flush pipe of any size and pattern with inlet ball valve float and handle complete of approved make.

All as per item No 84 above but fixing only in repairs

Supply and fixing in repairs of vitreous china wash hand basin, white, flat back of size 630 x 450 mm including waste coupling, CI brackets, PVC waste pipe and connection 32 mm bore complete all as specified and directed.

Supply and fixingixed in repair vitreous chiana wash basin white oval type size 580x450 mm including , waste pipe and plug and porcelain stopper alongwith 32mm dia CP waste coupling and PVC waste pipe in repairs complete all as specified and as directed.

Supply and fixing in repairs of 15mm bore pillar taps, fancy type (long body), (Weight not less than 622 gms), cast copper alloy with capstan heads, decorative type chromium plated screwed down, high pressure screwed for iron pipe complete all as specified.

All as per item No 88 above but fixing only in repairs

All as per item No 90 above but fixing only in repairs

Supply and fixing in repair decorated type looking mirror of area exceeding 0.5 sqm but not exc 2.00 sqm, 6-8 mm thick complete all as specified and as directed. Note : Design and pattern shall be approved by GE

Supply and fixing brass chromium plated bottle traps 40mm bore for wash basins with inlet and outlet screwed for pipe or connections including necessary packing, union and cap and fixed all as specified and directed.

Supply and fixing 40 mm bore low density polyethylene pipes (LDPE) of pressure rating 6 kgf/Sq cm fixed complete to walls, ceilings or in floors etc complete all as specified and as directed.

Supply and fixing in repair hand shower (health faucet) (ABS Body) with 8mm Dia, 1.5 Meter Long Spirochrome flex tube & Wall Hook etc complete all as specified and as directed.

All as per item No 95 above but fixing only in repairs

Supply and fixing in repair 2-way bib cock with wall flange, chromium plated, 15mm etc complete all as specified and as directed.

All as per item No 97 above but fixing only in repairs

Servicing and repair of sensor type automatic urinal flusher system of make Jaquar/ Prayag/ Hindware/ equivalent including changing of minor defective parts and alkaline battery cell of make Jaquar/ Duracell/ Power Plus by technician of company etc complete all as specified and as directed.

Fixing only in repairs/replacement of alkaline battery/cell of sensor type urinal flusher system complete all as specified and as directed. Make : Jaquar/Duracell/Power Plus or equivalent

Taking down rain water or soil waste pipes (any size or pattern) ,including all fittings all as specified and directed .

Material and labour for PVC (SWR) pipe of 110 mm bore single socketed in any length with rubber ring joint fixed to wall with suitable clamps of adequate numbers etc complete all as specified and directed.

Supply and fixing PVC(SWR) bend 110mm bore complete all as specified and as directed.

Supply and fixing PVC(SWR) Tee 110mm bore complete all as specified and as directed.

Supply and fixing PVC (SWR) pipes, 75 mm bore, single socketed, in any length, with rubber ring joints, fixed to floor/wall all as specified and directed.

Supply and fixing PVC (SWR) bends, 75 mm bore all as specified and directed.

Supply and fixing PVC(SWR) Tee 75 mm bore complete all as specified and as directed.

Material and labour for PVC (SWR) floor trap with grating,75 mm bore, including jointing to waste pipe with solvent cement including taking down of existing old trap all as specified and directed.

Excavating in post holes (or similar holes) each n exc 0.5 cu.m, getting out in soft/loose soil, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25cm, and removing surplus soil to a distance n exc 50m and making good surface.

Material and labour cement concrete(1:4:8) type D2 (40mm graded) in foundation filling and mass concreting, sub base floor etc complete all as specified and directed.

Supply and fixing of steel work in tubular trusses, post, purlin, rafter etc including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to IS 1161-1979 g complete all as specified and directed.rade St.-240

Dismantling asbestos cement, galvalume, fiber sheet (Plan, corrugated , semicorrugated, etc.) sheet in roof covering complete all as specified and directed.

Supply and fixing Pre painted GalvaIume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall fixed with self tapping screws etc complete all as specified and directed.

Supply and fixing Pre painted GalvaIume aluminium zinc coating GI based plain steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in ridge of roof covering fixed with self tapping screws etc complete all as specified and directed.

Demolition of brickwork or stone /boulder masonry built in cement mortar complete all as specified and directed.

Material and labour for brickwork with fly ash Bricks , straight or curved in plan exc 6 m mean radius built in CM(1:6) complete all as specified and as directed.

Material and labour for brickwork with fly ash Bricks ,straight or curved in plan to any radius in half brick thick wall in CM(1:6) complete all as specified and as directed

Taking down cement plaster on brick or stone wall,concrete, etc including racking out joints, hacking for key, scrubbing down with water etc all as specified and directed.

Material and labour for rendering 15 mm thick in CM 1:6 over brick /stone wall/block wall/concrete surfaces finished even and smooth without using extra cement all as specified and as directed.

Material and labour rendering 15mm thick on fair finish of bricks/concrete/stone surface of wall in CM (1:4) using WPC and finished the surface even and smooth without using extra cement (WPC to be mesuared and paid separately) complete all as specified and directed.

Supply only integral water proofing compound ISI Marked complete all as specified and directed.

Material and labour for preparation of new plastered surfaces of walls and applying 1mm thick wall care putty in two layers of opposite direction for making the surface even & smooth and applying 2 coats of oil bound distemper with roller over a coat of alkali resistant primer complete all as specified and directed.

Material and labour for preparation of new plastered surfaces of wall and applying 2 coats of cement base paint complete all as specified and as directed at any height including necessary scaffolding if required at site.

Material and labour for preparation of new plastered wall surfaces and applying two or more coats of 100% premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm complete all as specified and as directed. Note :- Shade and pattern of the colour to be approved by GE.

Dismantling of old textile roof treatment of any type including roof tiles (if any) including cleaning the concrete surfaces of RCC roof slab thoroughly with wire brushes, washed and dried. etc all as specified and as directed.

Material and labour for PCC 1:2:4 type B-0 using 12.5 mm graded stone aggregate RCC roof slabs to fill undulations to achieve uniform slope complete all as specified and directed.

Material and labour for rendering over roof slab 10 mm thick in CM 1:3 on concrete surfaces mixed with water proofing compound @ 3% by weight of cement and finished surfaces fair and even without using extra cement all as specified and directed. Note : WPC shall be measured and paid separately.

Material and labour for repairing of roof, chajjas etc with and including comprising of the following steps :- (a) Cleaning & drying thoroughly existing surface of roofs, chajjas, etc for all foreign materials such as fungus, moss, dust, etc by wire brushing and dusting. (b) Removing loose concrete from surface cracks and then filled with Dr Fixit crack X paste in two coats or polymer modified mortar in case of wider cracks (above 5 mm width) (c) Applying priming coat of Dr fixit roof seal top coat (diluted with water 2:1) at the rate of 100-110 sqft/ltr and then allow it to dry for 3-4 hrs (d) Applying three coats of Dr fixit roof seal top coat (without diluted) at the rate of 24 Sqft/ltr in each coat with perpenducular direction to the previous coat embedded a 50 GSM non-woven needle punched fleece between the first and second coat as reinforment and third coat will be the top final coat including allow to dry for 2-3 hrs for each coat etc complete all as specified and as directed by Engr-in-Charge. Note: Work shall be carried out through authorised applicator of the manufacturer. Make : Dr Fixit (Roof seal) / Asian Paints (Infinia) / Sika/ STP or equivalent make as approved by GE.

Material and labour for repairing of walls and other vertical surfaces with and including comprising of the following steps:- (a) Cleaning & drying thoroughly existing surface of walls for all foreign materials such as fungus, moss, dust, etc by wire brushing and dusting (b) Removing loose concrete from surface cracks up to 5 mm width must be fillied with Dr Fixit crack X paste or polymer modified mortor in case of wider cracks (c) Apply one coat of Dr Fixit Raincoat Neo (diluted with 10% water) with brush /roller apply a self priming coat on the vertical surface on first day (d) Applying second coat on next day of Dr Fixit raincoat Neo without dilution as waterproof top coat either by roller or brush with force coverage at the rate of 3.7-4.1 Sqm/ltr to achive 100-110 micron DFT complete all as specified and directed. Note: Work shall be carried out through authorised applicator of the manufacturer.

Material and labour for cleaning & drying thoroughly existing surface of roofs, chajjas, etc for all foreign materials such as fungus, moss, dust, etc by wire brushing and dusting and applying liquid water proofing material of Tiki Aquaseal ARR/PU S/PU AHS, Sika or equivalent deluted with water in 1:2 by weight as a primer @ 6 to 8 Sqm/Kg uniformly covering the entire surface and then applying 2 coat of Tiki Aquaseal ARR/PU S/PU AHS, Sika or equivalent as per manufacturer's instructions and directed by Engr -in-charge. Note: Work shall be carried out through authorised applicator of the manufacturer.

Material and labour for removing loose concrete from chajjas, perapets, fascias, pillars, columns etc in area not exc 2 sqm on plan and repairing the same with cement mortar 1:3 or cement concrete type B-0, 1:2:4 (using 12.5mm graded aggregate) including white washing/ditempering/ weather proof paint / cement base paint as per existing surface complete all as specified and directed.

Material and labour for complete removal of existing treatment by washing, rubbing down and stopping of painted surfaces of walls, chajjas, columns, beams etc and finishing with two coats of acrylic smooth exterior paint (100 % acrylic) applied @ 1.67 ltr/10 Sqm over and including priming coat of exterior primer (acrylic base) applied @ 2.20 kg/ 10 sqm in any type of building/structure including RCC over head tank of any height complete all as specified and as directed. Make :- Asian Paints Ltd (Apex)/ Berger/ Nerolac or equivalent as approved by GE. Note : Rates are include for use of necessary scoffolding, trestles, ladders, cradles etc if required for execution of work and no extra amount will be paid to the contractor for this.

Material and labour for silicon gel filling with gun to fill gaps between aluminium door frames/similar articles to arrest water coming inside from cills/jams and similar joints in other places complete all as specified and as directed. Note:- make of silicon shall be approved before use by GE/EIC.

dhanshree enterprises (BID ID -3509120)

M/s Prakash R. Verma (BID ID -3509370)

Rajveer Infrastucture (BID ID -3509443)

Bidder Name

M/s Prakash R. Verma

Rajveer Infrastucture

dhanshree enterprises

Tejas Vilas Khopal