SPECIAL REPAIR TO TOILETS OF KENDRIYA VIDYALAYA AT ITARANA MIL STN, ALWAR

Amount

Taking down cement plaster or cement lime plaster from PCC/stone surface/brick surfaces including raking out joints hacking for key scrubbing down with water etc and removing of retrived material upto 1.5 Km of complete all as directed.

Demolition of plain cement concrete in ground floor and pavings not exc 15 cm thick (below or above ground level) including floor tiles of any description complete all as specified and removing the demolished material upto 1.5 KM distance and thrown away in low lying area at place as approved by GE.

Taking down chowkat or frame with shutters area not exc 1.5 Sqm each (without taking off the shutters from the frame) including cutting holes for hold fasts & making good complete all as specified.

Taking down chowkat or frame with shutters area exc 1.5 Sqm but not exc 4 Sqm each (without taking off the shutters from the frame) including cutting holes for hold fasts & making good complete all as specified.

Demolition of brickwork or stone/boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars, etc but excluding ashlar facings, dressed stonework and precast concrete articles.

Disconnecting existing water tanks and removing to stores of capacity not exceeding 500 ltrs.

Disconnecting existing water tanks and removing to stores of capacity not exceeding 1000 ltrs.

Taking up or down steel water tubing and connections of 15mm bore, fixed in walls, ceiling, floors, trenches etc. all as directed.

Taking up or down steel water tubing and connections of 20mm bore, fixed in walls, ceiling, floors, trenches etc. all as directed.

Taking up or down steel water tubing and connections of 40mm bore, fixed in walls, ceiling, floors, trenches etc. all as directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding and removing serviceable tiles to store rubbish off the premises and M&L for glazed ceramic digital tiles ( coloured) of size 300x450x6-7mm thick on verticle surfaces of wall such as dados, skirting set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles laid over and including 10mm thick rendering finished even and rough in cement & sand mortar CM 1:4 complete all as specified and as directed.

S&F in repairs vitreous china floor mounted coupled WC(P or S trap) of size 365X630X750 mm Cat part No FNS-WHT-40751SSM of Jaquar with UF soft close slim seat cover complete fixing accessories, including flushing cistern with fittings cat part no FNS-WHT-40201 of Jaguar or equivlent in Johnson , hindware', including connection to trap and flushing pipe, antisyphonage pipe etc, making good to floor, complete all as specified.

S&F in repair vitreous china wash down water closet pan ( EWC) white ( ISI marked) including connection to drain (Or out goging pipe) and to flushing pipe antisyphonage pipe etc. & with plastic WC seat cover (white) closed pattern. Make - Parryware/Cera/Hindware

S&F in repairs vitreous china squatting pan (Orissa pattern) water closet (white) of size 580mm x 440mm with integral foot rest and 'P' or 'S' trap, including connection to trap and flushing pipe, antisyphonage pipe etc including provision of PCC (1:5:10) type E2 in filling, making good to floor, complete all as specified.

S&F in repairs PVC valveless syphonic action type flushing cistern low level 10 ltr capacity white, with inlet ball valve, float and handle and flush pipe 32mm bore including bracket complete as specified and directed.

S&F in repair ovel type wash hand basin (WHB) Cat part No FLS-WHT-5701 of Jaguar or cat part No P0813PW of Johnson to be fixed in granite stone including necessary cutting, pointed including 32mm CP waste coupling, CP bottle trap Cat part No ALD-WHM-769/250 of Jaquar complete all as specified and directed.

S&F in repairs Vitreous China Urinal pot flat back of size 370mm x 315mm x 620mm white Cat part No URS-WHT-13253 of Jaguar or Jhonson cat part No P0519PW including 32 mm CP bottle trap Cat part No ALD-WHM-769/250 of Jaquar and 15 mm brass chromium plated concealed flush valve of Jaquar Cat part No PRS-CHR-073 complete all as speified and complete.

S&F in repairs Curved shaped frosted glass urinal partition 8-10 mm thick fixed with chromium finish L shape brackets , Ht-900mm, width 450mm Cat part No 1810-UC/1110UC of Jaquar complete all as specified and directed.

M&L for rendering in cement mortar (1:4) 15mm thick on stone masonary surfaces or fair faces of brick work or concrete surfaces mixed WPC 3% by wt of cement finished even and smooth without using extra cement complete all as specified and directed. ( Note : Supply only WPC shall be measured and paif seperately).

M&L rendering 15mm thick in CM 1:6 on fair/ other than fair of brick masonry work or concrete surfaces finished even and smooth without using extra cement complete all as specified and directed.

M&L for rendering 10 mm thick in cement mortar 1:3 on concrete surfaces in ceiling, finished even & smooth without using extra cement complete all as specified.

M&L for machine cut mirror polished kota stone slab flooring 18 to 20mm thick laid over & including screed bed or bedding layer of 20mm thick in CM 1:6 and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and mirror polishing complete all as specified and directed.

M&L for machine cut kota stone slab 15-18mm thick in riser of steps, skirting, dado and pillar laid over and including over 10mm thick rendering CM 1:4 complete all as specified and directed.

M&L for 25mm thick PCC 1:2:4 type B-0 using 12.50mm graded stone aggregate as in flooring complete all as specified and directed.

M&L cement cocnrete type C-1 1:3:6 (using 20mm graded stone aggregate) as in plinth protection 75mm thick and surface to be finished even and smooth without using extra cement. Plinth protection shall be laid in pannels n.exc 1.50 mtr 6mm wide and 10mm deep joints shall be made between wall & pinth protection and between panels. Joint shall be filled with bitumen mastic and sand in proporation 1:3 ( one part of bitumen and three part of sand ) complete all as specified & directed.

S&F in repair 100/75 mm dia stainless steel grating cat part No FT-02/FT-03 of prayag or equivalent.

S&F 140 mm long Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring with vulcanised rubber piece.fixed in floor as directed.

M&L for rolled mild steel work angle iron 40x40x6mm or other section as in door frame(Chowkats) incl provn of 12mm dia deformed bar welded horizontally to bottm of frame Grade Fe-290 (Gde E-165), complete all as specified & directed.

M&L for flat iron 25mm x 6mm for hold fast bands, straps, supports or stays for rain water, ventilating pipes incl bolts if required and wall tie, clamps etc. complete, all as specified & directed.

S&F factory made 35 mm thick plain framed, paneled shutter (Two panels) with lock rail and panel of 9mm thick BWP commercial ply or 12 mm thick veneered particle board with commercial veneering on both faces, size of rail and styles as per IS : 1003 (Part-I), kiln seasoned and chemically pressure treated using second class Hard Wood rail and styles, fixed to chowkat, complete all as specified & directed.

S&F factory made 35mm thick glazed and skeleton shutters made of second class hard wood, open rebated and prepared to receive glass, gauze etc (without sash bars) edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc., sizes of members of shutters as specified in clause 8.24 of Section 8 in SSR Part-I, kiln seasoned and chemically pressure treated, fixed to chowkat, complete all as specified & directed.

S&F aluminum powder coated aluminium window having three track section 92mm x 31.75mm, shutter section 40mm x 18mm mounted on bearing to slide on track plain anodised of approved colour including S&F of 5 mm thick frosted/plian glass and wire mesh fixed with glazing clip, PVC track gasket, EPDM rubber gasket on glass of weather tightening along with recesed type handle and lock including sealing gap with marble surface with silicon sealent making it water proof in all manner complete all as specified and directed

S&F aluminium powder coated ventilator made of aluminim section of size 50.8mm x 25.4mm (weight 0.489 Kg/M) with top hung shutter made of aluminium section 40mm x18mm including 5 mm thick frosted glass with glazing clip, stay, alumimum handle complete all as specified.

S&F factory Made solid PVC moulded door sShutters 28 to 30mm thick (stiles), with 2, 4 or 6 raised panel design with 2mm thick moulded PVC wood grain sheet on the front face & 2mm plain colour PVC sheet on back face, fixing in frame at site as per specification & drawing.

S&F solid PVC door frame of size 50mm x 47mm made out of 5mm wood grain colour PVC sheet reinforced with MS square tube, fixing in opening as per specification & drawing

S&F aluminium anozised barrel tower bolt 150mm long stove enamelled black with bright bolt complete all as specified and directed.

S&F 125mm aluminium handles cast type anodised all as specified and directed.

S&F butt hinges of size 100mm medium weight, cold rolled mild steel ISI marked complete all as specified.

S&F aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) 300mm long not less than 12mm dia with and incl minimum of 06 bolts and nuts, 4 on plate and 2 on staple and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed, plate and fixed all as specified.

S&F aluminum anodised, barrel tower bolts of extruded section and fixed 200 mm long complete all as specified and directed.

S&F extruded aluminium alloy handles 150mm size fabricated type anodized ISI marked complete all as specified and directed.

M&L for brick work with sub class B bricks, straight or curverd on plain to any radius in half brick thick walls, built in CM 1:4 complete all as specified and directed.

M&L for brick work with sub class 'B' bricks, straight or curved on plan exeeding 6m mean radius, built in cement mortar 1:6.

S&F galvanised mild steel wire cloth, 0.56mm nominal dia of wire & average width of aperture 1.18mm & fixed with tinned tacks or galvanised wire stapples.

S&F 3mm thick sheet glass ordinary quality and glazing with beading, clips in square not exc 0.5 sqm in each pane including to match with the existing/new surfaces, complete all as specified.

Hacking out old broken glass from metal frame including punching or drilling out old glazing pins/spring clips and providing and fixing new ones

M&L for preparation of new steel and iron surfaces of any description over 10 cms in width or girth and applying one coat of primer with two coats of synthetic enamel paint of approved tint complete all as specified.

M&L for preparation of old painted steel and iron surfaces of any description over 10 cm in width or girth and applying one coat of synthetic enamel paint of approved tint all as specified & as directed.

M&L for preparation of new surfaces of wood or wood based materials of any description over 10 cm width or girth and applying two coats of synthetic enamel paint of approved tint over a coat of pink primer complete all as specified.

M&L for preparation of old painted surfaces of wood and wood based material of any description over exc 10 cms in width or girth and applying one coat of synthetic enamel paint of approved tint all as specified & as directed.

S&F mild steel framed work such as grills, guard bars, barred iron doors, cooler stand, framework of water tanks and similar works, conforming to Grade E-165 (Fe 290 ), including welding etc. complete all as specified & as directed.

S&F rotational moulded polyethylene water storage tank (cylinderical vertical with closed top) hoisted & fixed in position all as specified 500 ltr capacity including 2 Nos GI tank nipple15/20 mm as required ncluding 2 nos GI tank nipple15/20 mm as required complete all as specified and directed.

S&F rotational moulded polyethylene water storage tank (cylinderical vertical with closed top) hoisted & fixed in position all as specified 1000 ltr capacity including 2 Nos GI tank nipple15/20 mm as required complete all as specified and directed.

S&F in repairs ball valves, high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball, screwed for iron pipe 20mm bore (minimum weight 210 gms) complete all as specified and as directed.

S&F in repair CP bib taps, cast copper alloy fency type with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule of 15 mm bore and fixed complete all as specified and directed. Make Jaguar Cat Part No OPR CHR 15037PM or Johnson Cat Part No T2605C3.

Refixing old galvanized steel water tubing medium grade of 15mm bore including cleaning with & including new fittings and fixed complete to walls and ceilings or laid in floors in new or old position all as directed.

Refixing old galvanized steel water tubing medium grade of 20mm bore including cleaning with & including new fittings and fixed complete to walls and ceilings or laid in floors in new or old position all as directed.

M&L for galvanized steel water tubing medium grade of 15mm bore with & including all fittings and fixed complete to walls and ceilings or laid in floors complete all as specified and directed.

M&L for galvanized steel water tubing medium grade of 20mm bore with & including all fittings and fixed complete to walls and ceilings or laid in floors complete all as specified and directed.

M&L for galvanized steel water tubing medium grade of 40mm bore with & including all fittings and fixed complete to walls and ceilings or laid in floors.

S&F in repairs 15mm bore angle cock fency type chromimum plated screwed down high presure with cruth or butter fly handle screwed both ends for iron pipe or for unions all as specified and directed. Make - Jaguar cat part No- CON CHR 053KN or Johnson cat part No T2710C.

S&F in repairs chromium plated shower rose (fency type) 125mm size with or without swivel joint including fixing to steel pipe of 15mm bore or union complete all as specified. Make Jaguar cat part No OHS-CHR -1789 or Johnson Cat part No S1740C & S2349C.

S&F in repairs 110mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wall complete all as specified including dismantling & taking out old unserviceable 110mm bore PVC pipe with fittings.

S&F PVC (SWR) pipes of 75mm nominal outside diameter (Type B with wall thickness 3.20 to 3.8 mm) single socketed in any length with rubber ring joints laid in trenches or in floors of 75mm pipe i/c taking out old u/s PVC/CI pipe with fittings complete all as specified and directed

S&F PVC (SWR) pipes of 110mm nominal outside diameter (Type B with wall thickness 3.20 to 3.8 mm) single socketed in any length with rubber ring joints laid in trenches or in floors of 75mm pipe i/c taking out old u/s PVC/CI pipe with fittings complete all as specified and directed.

All as per item No 65.00 above but 75mm bore complete all as specified and directed.

S&F 75mm bore PVC (SWR) bends, any radius with access door complete all as specified and directed.

S&F 75mm bore PVC (SWR) branch piece, double (double ‘Y’) equal or unequal with access door complete all as specified and directed.

S&F 110mm bore PVC (SWR) bend, any radius with access door complete all as specified and directed.

S&F 75mm bore PVC (SWR) vent cowl complete all as specified and directed.

S&F in repairs PVC connection 450 mm long suitable for 15 mm bore GI pipe including PTMT nuts on both sides complete all as specified.

Taking out old unserviceable nahani trap and S&F PVC (SWR) nahani trap plain including jointing with solvent cement, diameter of outlet 75/100mm, complete.

M&L for non skid ceramic tiles (coloured) of size 300mm x 300mm x 7mm thick in floors, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles laid over and including 15mm thick screed bed in cement & sand mortar CM 1:6 complete all as specified and as directed.

M&L for non skid ceramic tiles (coloured) 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.36 sqm, in floors etc.laid over and including 10mm screed bed or bedding layer in CM 1:4 set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile complete all as specified and directed.

S&F gun metal globe or gate valve with iron wheel head, screwed both ends for iron pipe and fixed 40mm size all as specified and directed.

All as per item No 75.00 above but 20mm size.

S&F in repairs tubular towel rail 20mm dia, D type, 60mm long between flanges (Aluminium anodised) complete all as specified and directed.

M&L for preparation of newly plastered surface of wall & applying two coats of cement base paint over a coat of primer complete as specified and directed.

M&L for complete removal of existing treatment including cleaning of mortar drops, smoke soot, moulds, moss, efforsecent salt, trading oil grees spots etc using grinding machine on wall surfaces and preparation of old plastered wall surfaces and applying two coats of oil emulsion distemper ( OBD) of approved shed/tint over and including a coat of white wall care putty 2 mm thick complete.

M&L for preparing newly plastered surfaces & applying two coats of oil emulsion distempering(OBD) over and including a coat of white wall care putty 2 mm thick over a coat of primer on walls complete all as specified and directed.

M&L for preparation of old decorated plastered surfaces of walls and applying one coat of cement base paint of approved shade/tint complete all as specified.

M&L for preparation of new plastered ceiling surfaces and applying three coats of white wash including priming coat complete all as specified and directed.

M&L for preparation of old plastered surfaces of ceiling & applying one coats of white wash complete all as specified.

S&F Central hole basin mixer cast copper alloy with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' screwed for iron pipe and fixed Cat Part No FUS-CHR-29023B of Jaguar or Cat part No T-2517C of Johnson.

Supply only Integral Water proofing compound.

M&L Granite (of any type) 15 to 18mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing All the edges of granite shall be made bull nosed/ round complete all as specified

S&F in repairs health faucet chromium plated suitable for 15 mm bore pipe including 1 M long chromium plated /SS tubes for EWC complete all as specified & directed by Engineer-in-Charge. Make Jaguar cat Part No - ALD-CHR-587 or Johnson cat part No S0826C.

S&F in repair chromimum plated brass toilet paper holder , complete all as specified and direcded Make- Jaguar Cat Part No ASH CHR 1551 or Johnson cat part No T1354C.

S&F in repair liquid soap dispenser, complete all as specified and direcded Make- Jaguar Cat Part No AKP-CHR-35735P or Johnson cat part No T3369C.

S&F in repair 15mm bore two way angle valve chromimum plated screwed down, high pressure with capasten head screwed both ends for iron pipe or for union complete all as specified. Make- Jaguar cat part No CON 107 KN or equivelant in Johnson.

M&L for vitrified tiles (dark shade / double charged / ultra charged ) 8 to 9 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.18 sqm but not exceeding 0.36 sqm as in floors etc. laid over 15 mm screed bed or bedding layer in CM 1:4 set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile Complete all as specified and directed.

Excavation in trenches, demolition and breaking up drain pipes (salt glazed stone war, AC, or reinforced concrete), returning filling and removing surplus soil, inner dia 150mm including PCC haunching and bedding complete all specified and directed.

M&L for 150 mm bore reinforced cement pipes class NP-2 laid in trenches and jointed complete with collars all as specified and directed.

M&L PCC 1:4:8 type D-2 using 40mm graded stone aggregate as in concrete bed drain pipes 150mm bore including packing under and haunching against the sides of pipe after they are laid and tested complete.

Cutting into existing manholes for connecting new dain pipe of 150mm internal dia, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-1 smooth finished, and reforming benching as required.

M&L for providing post construction anti termite treatment alongwith external wall below concrete or masonry apron using chemical emulsion @ 2.25 Litres per linear metre including drilling and plugging holes etc in apron with cement mortar 1:2 (1 cement 2 coarse sand) complete all as specified and as directed.

M&L for anti termite treatment of soil under existing floors using emulsion @ one litre per hole, 300 mm apart including drilling and plugging 12 mm dia holes with cement mortar 1:2 (1 cement 2 coarse sand ) to match the existing floors, complete all as specified and as directed.

M&L for anti termite treatment of voids in masonry, alongwith wall below concrete or masonry apron using emulsion @ one litre per holes,soil under existing floors using emulsion @ one litre per hole, including drilling and plugging 12 mm dia holes with cement mortar 1:2 (1 cement 2 coarse sand) to match the existing floors, complete all as specified and as directed.

S&F automatic wall mounted hand dryer made of High grade ABS plastic body white (DOLPHY) touch free infrared activation of size 240mm x 230mm x 240mm of Model No DAH0011/12 of Dolphy India or equivalent standard size complete all as specified.

S&F Rajshree brand factory made PVC kitchen/cupboard shutter (Flush type) of required size, fabricated by joining for 18mm thick PVC Celuka ply with prelaminated sheet on one side cut to desired size of shutter and fixed and including with frame, incl all necessary fittings and fixtures like nickle plated clip hinges, knobs, channels etc including dismantling boarding any description. Note : Items like cupboard knobs, stainless steel channel, CP plate clip hinges are included in the mentioned rates and as per specification. The measurement area shall be front elevation.

S&F in repairs brass CP wall mixer 3 in 1 with L-bend mixing hot & cold water Make Jaguar cat part No FUS-29273 UPR or Parryware cat part No G4616A1 or equivalent all as specied screwed down for iron pipe and fixed.

S&F in repairs salt glazed stone ware gully trap square or round mouthed type 'P' of size 150mm x 150mm with CI grating, setting & jointing with cement with grouting surrounding gully trap with PCC 1:3:6, type C1 block 30 x 30 x 45cm together with necessary form work, excavation & earth work in soft/loose soil, complete, all as specified and as directed.

S&F for 75mm thick steel fibre reinforced (SFRC) man hole cover with iron frames (medium) complying to the standard specifications as mentioned in the IS 12592 BIS Standard, minimum load bearing capacity 5 ton/sqm, in square, rectangular or circular shape complete all as specified & as directed.

M&L for reinforced cement concrete 1:2:4 type B1 using 20 mm graded stone aggregate as in shelves, Lintel n exe 1.5 M span and similar work incuding necessary from work complete all as specified and directed.

M&L mild steel bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specifed and directed.

All as per item No 107.00 herein above but 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders

Cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc. and making good, cutting exceeding 20cm girth complete all as specifed and directed.

Cutting openings, through brick walls for door, window and other openings or enlarging existing openings. converting window into door openings, etc built in cement mortor. or cutting out defective brick work for under-pinning, including providing, fixing and removing shoring, cleaning and stacking bricks, removing surplus serviceable bricks, hard-core, etc to store and rubbish not exc. 50m complete all as specifed and directed.

Forming jambs, etc. to openings (to foregoing item) including cutting, toothing and properly bonding into old work, also facing, jointing and pointing to match existing work, complete all as specifed and directed.

Taking down carefully, copper/aluminium unserviceable /perished point wiring any type for light/ fan/ socket or power complete including fittings such as switches, ceiling roses, pendant holders, lamp holders, bracket holders, regulators sockets, light fittings, lamps etc, and making good to disturbed surfaces of wall/floor/ceiling etc, complete, all as specified and directed.

M&L for point wiring for one light point controlled by one, one way switch with multistrand 1.50 Sqmm unsheathed copper conductor PVC insulated FRLS cable including continuous earth wire 1.5 Sqmm in green colour unsheathed copper conductor PVC insulated FRLS cable connected to common earth dolly in PVC casing & caping with accessories fixed on surface of walls/ceiling by means of PVC sleeves/dash fasteners with cadmium plated screws, all as per IS in on New wooden boards fixed on wall for mounting switch, socket, regulators etc with and including 3mm thick phenolic laminated sheet top cover, complete, all as specified.

All as per description of serial item No. 113.00 here-in-before but for one 3 pin socket outlet 5 Amps controlled by one switch, 5 Amp on same board.

All as per description of serial item No. 113.00 here-in-before but for one 3 pin socket outlet 5 Amps controlled by one switch, 5 Amp independent board.

All as per serial item No. 113.00 here-in-before but for one 3 pin 15/16 Amps socket outlet controlled by one 15/16 Amps switch on independent board with 2.5 Sqmm single core PVC insulated and unsheathed multistranded copper conductor FRLS cable 1100 Volt grade including 2.5 Sqmm single core PVC insulated and unsheathed multistranded copper conductor FRLS cable 1100 Volt grade as continuous earth wire in green colour.

S&F switch piano flush type, single pole, one way, 5/6 Amp, 230 Volts.

S&F switch piano flush type, single pole, one way, 15/16 Amp, 230 Volts.

S&F socket outlet for 2 & 3 pin, 5 Amp, flush type 240 Volt.

S&F socket outlet for 2 in 1, 3 pin 5 & 15 Amp, flush type 240 Volt.

S&F ceiling rose surface Bakelite 65x50mm two or three terminals.

S&F decorative ultra slim liner LED lighting fixture with extended polycarbonate, environmental friendly, energy efficient suitable for 16 Watt to 20 Watt with LED tube of model E-LITE LED Pride and connecting up with and including white coloured flat/round twin core, PVC insulated, sheathed copper conductore cable of required size and length from ceiling rose to fitting complete, all as specified & directed. Make :- Havells Cat Part No LHEXBLP7PN1W018 or equivalent in Syska / Crompton Greaves as approved by GE.

S&F lamp holder, angular PVC/Polycarbonate type with back plate suitable for batten fittings complete all as specified and directed.

S&F in holder Adore LED lamp 9/10 watt complete all as specified and directed. Make :- Havells Cat Part No LHLDERHEML8X010 or equivalent of Syska / Crompton Greaves as approved by GE

S&F in repair sheet metal enclosures, double door type, suitable for fixing MCB,s, SPN with 200 Amps rated bus bar, 8 way, 240 volts.

S&F MCB 40 Amps, single pole & neutral, 240 Volts.

S&F MCB 6 to 40 Amps, single pole, 240 Volts.

S&F sub main wiring on and including PVC casing caping, 1100 Volts grade cable, PVC insulated copper conductor and over all PVC unsheathed for sub main wiring multistranded conductor of 6 Sqmm single core cable and earth wire of 6 Sqmm unsheathed copper conductor complete. (Two run of cable with one run of earth wire should measured as one length) including taking down existing unserviceable sub main wiring.

S&F 2nd class hard wood rectangular block open recessed of size 30x25x5 cm depth with 3mm thick hylum/Bakelite sheet on top grouted with 4 Nos bolts.

S&F LED type street DRACO Series light luminaire 20 watt 230 V 50 Hz including all necessary fitting accessories and LED complete, all as specified & directed. Make :- C&S Cat Part No LTESS20WLED or equivalent of Havells / Syska / CG as approved by GE

Supply, laying, jointing and testing XLPE insulated armoured heavy duty LT under ground electric cable with aluminium stranded conductor 1100 Volt grade cross sectional area 16 sqmm 2 core laid in trenches/ducts, through pipe, under floors or roads/ along poles etc complete all as specified. Note :- Sand cushioning, cable protection, GI protection pipe, clamps, jointing kits and excavation & earth work shall be measured & paid for separately.

Excavating in trenches not exc 1.5 metre wide and not exc 1.5 metre in depth for foundation or for shafts, walls, manholes etc not exc 10 Sqm on plan and getting out in soft/loose soil.

Returning, filling in, including spreading, leveling watering and well ramming in layers n.exc 25 cm in soft/loose soil.

Removal of excavated soil/ material to a distance not exc 50 metre and depositing where directed at a level n. exc 1.50 metre above the starting point complete all as specified.

M&L for brick work with FLY ASH BRICKS {As per IS-13757 (1993) burnt clay fly ash building bricks}, (OLD SIZE BRICKS) with width equal to the length of the brick laid dry & flat abutted with each other with gap between adjacent bricks not exc 10 mm over UG cable for protection including taking down old unserviceable bricks complete all as specified & directed.

M&L for dry sand cushioning to PVC under ground cable with screened and washed sand and punning to provide a required cover complete all as specified and directed. Note :- Thickness after punning shall be considered for payment.

M&L earthing complete with galvanized steel earth plate electrode 60cm x 60cm x 6mm thick burried directly in ground (earth pit not less than 2.25 m deep below ground level) with top edge of plate not less than 1.5 m deep below normal ground level and connected to and including galvanized iron earth wire 4 mm dia by means of GI nuts, bolts, check nuts, washers thimbles, etc as shown in electrical plate No 3 of SSR Part I and connection to main switch board or panel and testing on completion including excavation and earth work in any type of soil, returning filling in, and removal of surplus spoil to a distance not exc 50 metre, PCC chamber (1:3:6) type C-2, charcoal and salt mixed layer 15 cm thick all around the earth plate electrode, MS funnel with wire mesh, GI pipe medium grade 20 mm bore for watering and 15 mm bore 3.00 metre long GI pipe light grade for earth wire protection fixed with poles with two clamps, made from MS flat 25 mmx3mm, bolts, nuts and washers, 75 mm thick RCC cover 1:2:4 type B-1 shall be provided on CI frame etc complete all as specified & as directed. Note : PCC chamber shall be constructed at least 1.5 m away from the earth electrode. The pipe for watering shall be provided in slanting manner.

M&L galvanised steel water tubing light grade of 40mm bore with & including all fittings complete laid in trenches. Note :- Excavation & earthwork shall be measured & paid for separately.

M/s ASK Enterprises

M/s Laxmi Enterprises

AARSINFRATECH