Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Infra Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L-1₹33.1 LAccepted-AOC FLAT NO 10 S NO 98 PLAT NO 78 SAI SAYAJI PARK A RIGHT BHUSARI COLONY KOTHRUD PUNE 411 038 | PUNE | MAHARASHTRA | 411038 | L-1 | Accepted-AOC L-1 | |
| 2 | L-2₹39.3 L+₹6.2 L (18.7%)Rejected-Finance | L-2 | Rejected-Finance L-2 | |
| 3 | L-3₹44.7 L+₹11.6 L (34.9%)Rejected-Finance NOT FOUND | L-3 | Rejected-Finance L-3 |
Tender Value
₹36.9 L
EMD Value
₹73,800
Closing Date
2 Apr 2024, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
HQ CWE (AF) Bhisiana
HQ CWE (AF) Bhisiana
PROVISION OF ACCESS ROAD FROM LINK L TO LINK K AT AF STATION SIRSA
2024_MES_645540_1
CWE(BHI)/SIR-76/2023-24
Open Tender
Civil Works
Item Rate
273 days
Sirsa
As per tender documents
8 documents required · 8 mandatory
₹500
GE (AF) Sirsa
₹73,800
Yes
19 Apr 2024
7 Mar 2024
4 Apr 2024
7 Mar 2024
2 Apr 2024
21 Mar 2024
Amount
Excavating over areas not exc. 1.5 m deep and getting out in soft/loose soil complete all as specified and as directed.
Removing excavated material outside MD/AF land exc. 1.50 km but n exc. 5 km and depositing complete all as specified and as directed.
Material and labour for forming embankments of soil including raising (or lowering) earth spreading in layer not exc. 30cm thick, watering ramming/ rolling and finishing to required size, shape not exc 1.5m high from base etc complete all as specified and directed by Engineer-in-charge.
Rolling and consolidating formation surfaces in cutting with power road roller exc 8 tonne and not exceeding 12 tonne including necessary preparation of surface excavation to reqd level, gradient and camber including filling in depressions/ hollows which occur during the process complete all as specified and as directed by Engineer-in-charge.
Material and labour for GSB (shingle or gravel) 200mm thick consolidated thickness in two layers of 100mm each as per table 400-1 Morth specification spread, rolled with 8 to 10 ton capacity vibratory roller and consolidated to required gradient and camber complete all as specified and as directed by Engineer-in-charge.
Material and labour for 225 mm thick (compacted thickness) Wet mix macadum (WMM) using stone crushed aggregate of grading required as per table 400-11 of yellow book of MORTH laid in three layers 75 mm each with mechanical means and rolling with 8-10 tonne power roller over compacted sub base complete all as specified and as directed by Engineer-in-charge. Note : Mix will be prepared in mixing plant of suitable capacity.
Material and labour for Dry Lean concrete (DLC) not less than 100mm in M-15 (Design mix) with minimum cement (OPC 43 grade) content of 250Kg/Cum with minimum 7 days compresssive strength as 10N/Sqmm including spreading with mechanical senser paver, compacting and consolidating with power roller to required gradient and camber including necessary form work complete all as specified and directed by Engineer-in-charge. Note : In the event of increase in cement content as per design mix formula, nothing extra shall be admissible and quoted rates are deemed to be included for the same.
Material and labour for sand filling under floors or in foundations including watering and consolidation complete all as specified and directed.
Material and labour for polythene film 125 micron under PQC over sand cushioning not exc. 25mm thick including spreading and levelling complete all as specified and as directed by Engineer-in-charge. Note: Cost of sand cushioning shall deemed to be included in the quoted unit rate.
Material and labour for 200mm thick Pavement Quality Concrete as per design mix (as per IRC 44 specification) using graded crushed stone aggregate having minimum field flexural strength of 40Kg/Sqcm in pavement using non circular/triangular synthetic fibre @ 0.25% by weight of cement per cum (min cement content shall be 400 Kg/cum using OPC 43 grade) and sub plastizier, if required, laid to level, gradient and camber, spread, paved, compacted and finished using slope form paver including belting and broom in complete all as specified and directed. However in small length, narrow width and small turning fillets, fixed form paver may be used with steel formwork of approved size with prior approval of GE complete all as specified and as directed by Engineer-in-charge. Note: (a) Concreting shall be done by using self loaded transit mixer of capacity not less than 4.00 cum. (b) Non circular/triangular synthetic fibre shall be measured and paid separately as supply only under respective item. (c) In the event of increase in cement content as per design mix formula, nothing extra shall be admissible and quoted rates are deemed to be included for the same. (d) All expansion joints to be deducted and all dummy/construction joints to be considered for measurement purposes. (e) Numbering/date of casting of PQC slabs shall be done by engraving using brass letter of approved size and thickness.
Supply only polyster non circular/ traingular synthetic fibres 12mm long with circumphericial diameter 30-35micron, designed for melting point of 240 degree centigrede-260 degree centigrade and having specific gravity of 1.34 to 1.40 complete all as specified and as directed by Engineer-in-charge.
Material and labour for forming 12mm thick expansion joints filled with pre-formed bituminous filler and top 30mm primed and sealed with sealing compound, Grade ‘A’ thickness of slab 200mm complete all as specified and as directed.
Material and labour for forming contraction (dummy) joints 65mm deep x 10mm wide, filled with sealing compound grade 'B' complete all as specified and as directed.
Material and labour for brick work with sub-class ‘B’ bricks (old size bricks), straight or curved on plan exc. 6.0 metre mean radius, built in cement mortar 1:4 complete all as specified and as directed.
Material and labour for providing cement concrete 1:2:4 type B-1 20mm graded stone aggregate as in coping complete all as specified and as directed.
Material and labour for framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railings, framework of water tanks and similar work conforming to Fe-290, Gde-E-165 complete all as specified and as directed.
Material and labour for preparation of new steel surfaces of any description, not otherwise described over 10cm width or girth and applying two coats of synthetic enamel paint (First quality) over and including a coat of zinc chrome primer complete all as specified and directed by Engineer-in-charge.
M/s Har Nandi Construction Company
shiv shanker enterprises
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .