SPECIAL REPAIR TO BUILDING NO 260 JCOs MD ACCN OF 3 TTR AT BAMBOLIM CAMP UNDER GE PANAJI GOA

Amount

Taking down cement plaster on brick or concrete surface including raking out joints, hacking for key, scrubbing out with water, etc. complete all as specified and directed.

Material & Labour 15 mm thick external plastering on fair faces of brickwork or Concrete surface in CM 1:4 finished even and smooth (without using extra cement) with water proofing compound @ 3% by the weight of cement complete all as specified and directed. Note :- Water proofing compound will be measured separately

Supply only integral water proofing compound complete all as specified and as directed.

Material & Labour for rendering 15 mm thick on fair face of brickwork or on concrete surface in CM 1:6 finished even and smooth (without using extra cement) complete all as specified and directed.

Material & Labour for plastering 10 mm thick on brick or concrete surface in CM (1:3) on ceiling to be finished even & smooth without using extra cement complete all as specified and directed.

Material & Labour for two coat of oil bound distemper on newly plastered surfaces of walls including preparation of new surfaces and 3 mm thick wall care putty complete all as specified and directed.

Material & Labour for complete removal of existing treatment and applying two coat of oil bound distemper on plastered surfaces of walls including preparation of old surfaces and 3 mm thick wall care putty complete all as specified and as directed.

Material & Labour for complete removing of existing treatment, preparation of old plastered surface and applying 2 coats of white wash on ceiling over 3 mm thick wall care putty complete all as specified and as directed.

Material & Labour for preparation of new plastered surface and applying 2 coats of white wash on ceiling over 3 mm wall care putty complete all as specified as directed.

Material & Labour for complete removing of existing treatment, preparation of old plastered surface and applying 2 coats of white wash on walls including 3 mm putty complete all as specified as directed.

Material & Labour for providing and applying 3 mm wall care putty over plastered surface to prepare the surface even and smooth and applying two or more coat of 100% premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, alkali & fungal resistance dirt resistance exterior paint of required shade (company Depot Tinted) with silicon additives @ 1.43litre/10sqm over and including priming coat of exterior primer applied @.9 litre/10 Sqm over two coat of damp proof on new surface complete all as specified and directed.

Material & Labour for complete removal of existing surface finishes of external wall preparation of surface and providing and applying 3 mm wall care putty over plastered surface to prepare the surface even and smooth and applying two or more coat of 100% premium acrylic emulsion paint having VOC less than 50gm/litre and UV resistance as per IS 15489:2004, alkali & fungal resistance dirt resistance exterior paint of required shade (company Depot Tinted) with silicon additives @ 1.43litre/10 Sqm over and including priming coat of exterior primer applied @.9 litre/10 Sqm over two coat of damp proof on new surface complete all as specified and directed.

Demolition of cement concrete in below or above ground floor and paving n.exc 15 cm thick (unreinforced) complete all as specified and directed.

Demolition of reinforced cement concrete in below or above ground floor and paving not exceeding 15 cm thick ( For RCC tank) complete all as specified and directed

Material & Labour for hardcore of gauge n. exe 63 mm deposited, spread, levelled in layers n. exe 15 cm thick, watered rammed to a true surface using broken bricks complete all as specified and directed.

Material & Labour for 75 mm thick cement concrete 1:3:6 (type C1) using 20 mm graded stone aggregate as in plinth protection joint filled with bitumen sand mixer finished even and smooth without using extra cement complete all as specified and directed.

Material & Labour cement concrete 1:2:4 ( type B-1 ) using 20 mm graded stone aggregate 25 mm thick as in flooring etc complete all as specified and directed.

Material & Labour Cement concrete 1:3:6 (type C-2) using 40mm graded stone aggregate 75 mm thick as in sub base complete all as specified and directed.

Material & Labour for chequered cement concrete tiles 20cmx20cmx25mm thick set, jointed and pointed in neat cement slurry in floors with grey cement and pigments including 20 mm thick screed bed in CM 1:6 complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

Material & Labour coloured Non - skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 20 mm thick screed bed in CM 1:6 complete all as specified and directed.

Material & Labour coloured Glazed ceramic tiles in vertical surface 350x250x7/450x350x7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match including 10 mm backing coat in CM (1:4) complete all as specified and directed.

Material & Labour for 20 mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in 15 mm thick cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite, including moulding to exposed edges, chamfered or rounded, polishing to edge etc complete all as specified and directed.

Taking down Chowkhats or frames with shutters (without taking off shutters from the frame) not exceeding 1.5 Sqm & removing from site complete all as specified and directed.

Taking down Chowkhats or frames with shutters (w/o taking off shutters from the frame) exceeding.1.5 Sqm but not exceeding. 4 Sqm & removing from site complete all as specified and directed.

Taking down and refixing in same opening shutters of any description exceeding 1.00 Sqm and not exceeding 2.00 Sqm each complete all as specified and directed.

Taking down shutters of any description exceeding 1.00 Sqm and not exceeding 2.00 Sqm each complete all as specified and directed.

Supply and fix 2nd Class H.W. plain solid straight chowkhats & frames wrought, framed, rebated on the solid rounded or chamfered put together with glue, pinned at joints complete all as specified and directed.

Supply and fix glazed, gauged skeleton shutter 35 mm thick 2nd class H/W factory made divided in to squares with plain, chamfered of rounded, mitred and rebated sash bars any number prepared to receive glass/gauged etc. edges of framing plain, chamfered or rounded fitted with cut and mitred beads for securing glass/gauged etc complete all as specified and directed.

Supply and fix 35 mm thick 2nd class H/W Factory made Plain framed, panelled shutter with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and style as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated complete all as specified and directed.

Supply and fix 30 mm thick Flush shutters solid core construction, with particle board core and plywood face panels commercial type on both sides complete all as specified and directed.

Supply and fix 25 mm thick Flush shutters (wall cup board shutters), solid core construction, with block board core and plywood face panels commercial type on both sides complete all as specified and directed.

Dismantling boarding, any description, fixed in any position with nails complete all as specified and directed.

Supply and fix 18/19 mm thick Prelaminated particle board, exterior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work complete all as specified and directed.

Supply and fix Anodised aluminium frame work for doors windows ventilators and partitions (fixed portions) with extruded built up standard tubular sections/appropriate Z sections and other sections of approved make conforming to IS:733 and IS 1285 fixing with dash fasteners of required dia and size including necessary filling up the gaps at junctions i.e. at top bottom and sides with required EPDM rubber/neoprene gasket etc. Aluminium sections shall be smooth rust free straight mitred and jointed mechanically wherever required including cleat angle aluminium snap beading for glazing/panelling C P brass/stainless steel screws all complete all as specified and directed.

Supply and fix Anodised aluminium window and ventilator shutters, fixed type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc. complete all as specified and directed.

Supply and fixing Anodised aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100 mm long (2 no.) suitable handle (1no.) complete all as specified and directed.

Supply and fix solid PVC door frames of size 50mm x 47 mm made out of 5 mm thick plain/printed coloured PVC sheet reinforced with MS square tube all as per specification & drg complete all as specified and directed.

Supply and fix factory made solid panel PVC door shutter 30 mm thick (styles) consisting of frame made out of MS tubes for top & bottom rails MS frame shall be covered with heat moulded plain colour PCV 'C' Channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for styles & plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail, panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the styles & rails with suitable PVC sheet beading & jointed together with solvent cement, complete all as specified and directed.

Supply and fix 4 mm thick plain sheet glass ordinary quality and glazing fix with bead in squares not exceeding 0.5 Sqm in each pane complete all as specified and directed.

Supply and fix 4 mm thick figured glass/ pin head type and glazing with oil putty or fixed with beads in square not exceeding 0.5 sqm in each pane complete all as specified and directed.

Supply and fix Anodised aluminium grill (anodised transparent or dyed to required shade according to IS 1856 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with CP brass/stainless steel screws @ 200 mm centre to centre including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening complete all as specified and directed.

Supply and fix Aluminium alloy wire cloth fixed 0.45 mm nominal dia.of wire and average width of aperture 1.40 mm and fixed with aluminium wire staples/wooden beads in doors and windows complete all as specified and directed.

Supply and fix in repair Aluminium alloy wire cloth fixed 0.45 mm nominal dia. of wire and average width of aperture 1.40 mm and fixed with aluminium wire staples/wooden beads in doors and windows complete all as specified and directed.

Material & Labour for preparing old wood or wood based surfaces of any description, over 10 cm width or girth and applying 2 coat of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

Material & Labour for preparing new wood or wood based surfaces of any description, over 10 cm width or girth and applying 2 coat of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

Supply and fix 100 mm long butt hinges medium weight cold rolled mild steel complete all as specified and directed.

Supply and fix Aluminium anodised barrel tower bolts 150 mm for door of extruded section and fixed complete all as specified and directed.

Supply and fix 300 mm length aluminium alloy, anodised, sliding door bolt with hasp, staple(bolt type) and fixing clips of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed.

Supply and fix 125 mm long Extruded aluminium alloy handle fabricated anodised complete all as specified and directed.

Taking up or down steel tubing & connections including cleaning for refixing or removing of pipe 15 mm bore complete all as specified and directed.

All as per item no. 51 above but 20 mm bore pipes.

Supplying and laying of 20 mm CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified and directed.

All as item no. 53 but for 25 mm bore.

Supply and fixing in CPVC 20 mm Brass Elbow complete all as specified and directed.

Supply and fixing in CPVC 20 mm Brass Tee complete all as specified and directed.

Supply and fixing in CPVC 20 mm Male Brass Threaded Adaptor (MTA/ MBTA) complete all as specified and directed.

Supply and fixing in CPVC 25 mm Female Brass Threaded Adaptor (FTA/ FBTA) complete all as specified and directed.

Supply and fixing in CPVC 25 mm Tank Adaptor complete all as specified and directed.

Supply and fixing in CPVC 20 mm Ball valve complete all as specified and directed.

All as item No. 60 but for CPVC 25 mm Ball valve

Supply and fixing of soap dish vitreous china coloured approximate size (160mmx160mmx90mm) fixed in repairs complete all as specified and directed.

Supply and fix wash hand basin in repair, white flat back size 550 x 400mm including 32 mm brass chromium plated waste fittings, brackets, pillar cock 15 mm,cast copper alloy with capston heads, chromium plated, screwed down high pressure with long shank and flynuts, screwed for iron pipe and fixed, PVC connection 15 mm size with PTMT nuts of length 450 mm including cutting for and pinning in ends of brackets for erecting stand etc. including PVC waste pipe etc complete all as specified and directed

Supply & Fix in repairs white vitreous china squatting pan orissa pattern of size 580 mm x 440 mm, with integral foot rest and P or S trap connection to trap and to flushing pipe front or back inlet including, trap and taking out old WC & connections including 110 mm PVC (SWR) WC connector with lip ring etc complete all as specified and directed.

Supply and fix PVC valveless, syphonic action type flush tank in repair, white, 10 litre capacity with inlet ball valve, float & handle including brackets complete high level, flush pipes of PVC 32 mm dia, rubber cones, PVC connection 15 mm size with PTMT nut of length 600 mm etc complete all as specified and directed.

Supply and fix sinks made of stainless steel 1 mm thick kitchen or lavatory with plugs, washers and wastes; including beeding in CM on dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495x420mm bowl size 410x330x160mm including waste fitting brass CP 32 mm with long shanks and fly nuts and waste pipe 32 mm dia including 15 mm dia fancy type chromium plated bib taps complete all as specified and directed.

Supply and fix in repairs Fancy type chromium plated bib tap cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule & fixed bore of pipe 15 mm complete all as specified and directed.

Supply and fix Shower rose brass C.P. with or without swivel joints, 125 mm size, including fixing to steel pipe or unions in repair complete all as specified and directed.

Supply and fix Towel rail 60 cm long brass chromium plated 20 mm dia with brackets fixed to walls complete all as specified and directed.

Supply and fix Powder coated decorative/fancy type curtain rod 25 mm dia aluminium in repair complete all as specified and directed.

Supply and fix in repair Powder coated curtain brackets decorative/fancy type for securing curtain rod 25 mm dia complete all as specified and directed.

Supply and fix rotational moulded polyethylene water storage tank (Cylindrical vertical with closed top ) hoisted & fixed in position all as specified in ssr pt I capacity of tank 1000 ltr including ball brass valves 20mm dia, high pressure, with polythene float and fly nut complete all as specified and directed.

Supply and fix in repairs stop valve cast copper alloy screwed down high pressure with crutch or butterfly handle, screwed both ends for iron pipes or for union & fixed , of bore of pipe 20 mm complete all as specified and directed.

Supply and fix PVC (SWR) Gully trap 125/110 mm setting & jointing with solvent cement complete all as specified and directed.

Supply and fix PVC (SWR) floor trap 75 mm dia, plain with grating including jointing with solvent cement complete all as specified and directed.

Taking up cast iron 80 mm bore (including all fittings), with spigot and socket ends and lead joints including burning out joints and recovering lead complete all as specified and directed.

Taking up cast iron 100 mm bore (including all fittings), with spigot and socket ends and lead joints including burning out joints and recovering lead complete all as specified and directed.

Supply and fix PVC (SWR) pipes 75 mm bore single socketed in any lengths with rubber rings joints fixed to walls complete all as specified and directed.

Supply and fix PVC (SWR) pipes 110 mm bore single socketed in any lengths with rubber rings joints fixed to walls complete all as specified and directed.

Supply and fix PVC (SWR) vent cowl 75mm Dia complete all as specified and directed.

Supply and fix PVC (SWR) vent cowl 110mm Dia complete all as specified and directed.

Supply and fix 75 mm PVC (SWR) bends complete all as specified and directed.

Supply and fix 110 mm PVC (SWR) bends complete all as specified and directed.

Demolition of Brickwork or stone/ boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars, etc, but including ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed.

Material & Labour Pre-cast cement concrete block masonry with solid blocks, exc. 10 cm in width 1:3:6 (type C1) using 20 mm graded stone aggregate and setting in mortar 1:6 complete all as specified and directed.

Material and labour for polythene film black 50 micron laid in floor of sunken slab complete all as specified and directed.

Material and labour for Bitumen blown any grade applied hot two coats, to concrete surfaces at the rate of 1.5 kg per Sqm per coat complete all as specified and directed.

Material & Labour for mild steel ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and directed.

Material and labour for Providing edge moulding to 18-20 mm thick stone of counters vanities etc. including machine polishing to edge to give high gloss finish etc. complete all as specified and directed.

Supply and fix GI wire netting 0.90 mm dia and 12 mm mesh lathing to wood or metal studding, joists, etc. in walls, ceilings, stanchions, beams, etc. including all laps, cutting and waste complete all as specified and directed.

Dismantling asbestos cement (Corrugated or semi corrugated) sheets in roof coverings complete all as specified and directed.

Dismantling of timber scantling 40 Sqm and over in section in any position as in unframed work complete all as specified and directed.

Dismantling of timber scantling in fillets, rails, posts, rafters, purlins, etc. under 40 sq. cm in section unframed work complete all as specified and directed.

Material & Labour for Cement concrete 1:2:4 (type B-2) using 40mm graded stone aggregate in walls or retaining walls, any thickness, size or shape including pilasters, buttresses columns, pillars, boundary pillars and posts ( including caps and base) complete all as specified and directed.

Material & Labour for Formwork to sides of pillars, posts, struts, piers, columns and stanchions for fair finished surfaces complete all as specified and directed.

Supply and fix steel work in tubular pole, trussed, purlins, rafter including special shaped washer etc complete using ERW or induction butt welded tubes conforming to I.S 1161-1998 grade St 240 complete all as specified and directed.

Supply and fix Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment Fe 410-W (Gde-E-250) quality complete all as specified and as directed

Supply and fix Pre painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 MPa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

All as per item No 99 above but for plain sheet on ridge Roof complete all as specified and directed.

Material & Labour for preparation of new or previously untreated steel surface of any description, over 10 cm width or girth, not otherwise described and applying two coat of synthetic enamel paint of different tint over a coat of red oxide paint complete all as specified and directed.

Material & Labour for machine cut kota stone slab flooring 20-25 mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing including 15mm thick screed bed in CM 1:4 including moulding to exposed edges, chamfered or rounded, polishing to edge etc complete all as specified and directed.

Material & Labour for Machine cut kota slab 20-25mm thick in risers of step skirting dado over cement screed and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and mirror polishing including 10mm thick rendering on fair faces of brick work or concrete surfaces in CM 1:4 complete all as specified and directed.

Material & Labour for cement concrete 1:7:12 (type E2) using 40 mm graded stone aggregate in sunken floor complete all as specified and directed.

Supply and fix in repair kitchen plate rack made of steel including fixing with cantilever brackets complete all as specified and directed.

Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc complete all as specified and directed.

Taking down carefully UNSV main switch and DB's including MCBs of any size make, type and capacity and depositing at site complete all as specified and directed.

Taking down UNSV sub main wiring of any size make, type and capacity and depositing at site complete all as specified and directed.

Material & Labour for Concealed point wiring with 1.5 Sqmm (nominal area) PVC insulated and PVC unsheathed FR cable, stranded copper conductor in existing conduit of size 20 mm with all fittings and accessories with sunk pressed steel terminal boxes for mounting of socket, switches, fan regulator etc for one light/fan point controlled by one switch or switch and regulator complete including PVC insulated and PVC unsheathed FR cable stranded copper conductor earth wire 1.5 Sqmm size connecting to common earth and earth dolly switch complete all as specified and directed. (a) One light point / Fan point ,Bell point controlled by one, one-way switch,

All as per item No.109 above but one switch socket outlet 3 pin 5 Amps, on Same board

All as per item No.109 above but one switch socket outlet 2/3 pin 5 Amps, on Independent board.

All as per item No 109 above but one light point controlled by two way switches complete all as specified and directed.

All as per item No 109 above but with 2.50 sqmm PVC insulated FRLS, multistranded copper conductor cable 1100 V grade and 2.5 Sqmm PVC insulated FRLS multistranded copper conductor cable 1100 V grade for one 3 pin, 5/15 Amps switch socket outlet on independent board complete all as specified and directed.

Supply and fix Switch piano, flush type, 5Amps, single pole, one way complete all as specified and directed. Make: SSK Anchor/ Havell's

Supply and fix Switch Socket combination piano, flush type, 15 Amps, single pole, one way complete all as specified and directed. Make: SSK/Anchor/ Havell's

Supply and fix Switch Socket combination piano, flush type, 5 Amps, single pole, one way complete all as specified and directed. Make: SSK/Anchor/ Havell's, .

Supply and fix switch piano flush type single pole two way 5 Amp 240 Volts complete all as specified and directed. Make: SSK/Anchor/ Havell's

Supply and fix Ceiling rose surface bakelite 65x50mm two to three terminal complete all as specified and directed. Make : SSK/Havells/Plaza

Material & Labour for lamp holder, PVC/Polycarbonate type with back plate suitable for batten fittings complete all as specified and directed.

Supply and fix Bell switch including bell Ding Dong One way,240 Volts AC complete all as specified and directed. Make: ISI Marked

Supply and fixing Regulator step type 300 Watt 240 Volt for Ceiling Fan complete all as specified and directed. Make - SSK/Anchor/ Havell's

Supply and fix LED Batten Tube Light light fittings 18 Watt and fixed with wall surface with anodized extruded aluminium housing, high transmissitivity diffuser and high lumen output and connecting with 3 core flexible copper cable PVC insulated complete all as specified and directed. Make: Bajaj Cat part No BCLSB 20 WH or equivalent in CG, Havells

Supply and fix LED Batten Tube Light light fittings 10 Watt and fixed with wall surface with anodized extruded aluminium housing, high transmissitivity diffuser and high lumen output and connecting with 3 core flexible copper cable PVC insulated complete all as specified and directed. Make: Bajaj Cat part No BCLSB 10 WH or equivalent in CG,Havells

Supply and fix 20W LED street light fitting, new generation, energy saving and environmental friendly, long life LED street light made up of pressure die-cast housing with prisma as tic polycarbonate modular secondary lens optic for city road lighting source and lens embedded PC cover having top opening separate driver compartment with IP66 protection and impact resistance of IK08. 4KV inbuild surge protection of capacity LED including all accessories complete all as specified and as directed. Make: Havells cat NO VILUMINASL20WLED757SASYBOPC or equivalent in Bajaj Phillips/ Wipro

Supply and fix IP-42 protection distribution board, SPN 8 Way, 240 Volts, sheet steel, powder coated, double door system, fitted with two covers suitable for use on 240 124V, 50 HZ, with 200 Amps rated bus bar, neutral link each bar and din rail complete all as specified and directed.

Supply and Fixing Isolator SPN 6 to 40 Amps, 240 Volts complete all as specified and directed.

Supply and Fixing MCB SP 6 to 32 Amps 240 volts, 15 Hz, 10 KA suitable for lightening load of capacity 6 to 32 Amps complete all as specified and directed.

Supply and Fixing Isolator TPN 415 Volt 63 Amps complete all as specified and directed.

Supply and Fix Ceiling fan BEE labelling 5 Star Rated Voltage Single Phase, 230 Volts AC .Frequency 50HZ Maximum Power Input 50 Watt and Min air delivery 245 CFM and service value 6.0 and Sweep 1400 mm . Standard Fittings down rod, Regulator, blades & Accessories. Capacitor, double ball bearing, Down Rod, Canopy & other standard accessories for complete fitting of the fan complete all as specified and directed. Note;-Certificate received from BEE mention input power, 5 star rating air delivery and 2 year guarantee certificate will be submitted by the contractor . Make:- Bajaj / Havells / Crompton.

Material & Labour for submain wiring with two runs of single core PVC insulated FRLS, unsheathed, 1100 Volts grade, multistranded copper conductor cable of size 6 sqmm drawn through and including heavy grade PVC casing caping of suitable size, fixed to walls/floors/ceiling and surfaces on truss by means of saddles and clips etc including all conduit accessories/ fittings/junction box/ inspection covers etc of heavy grade, ISI marked with one run of 6 Sqmm PVC insulated FRLS, unsheathed multistranded copper conductor cable as a continuous earth wire complete all as specified and directed. Note: (a) Two runs of 6 Sqmm single core copper cables and One run of earth conductor cable of 6 Sqmm with casing capping/conduit will be measured and paid as one unit length

Material & Labour for XLPE insulated armoured heavy duty electric cable with aluminium conductor 11000 volts grade, cross sectional area 16 sqmm, 2 core complete all as specified and directed. Make:- Polycab/Havells/Gloster/Finolex cable Ltd

Supply and laying DWC HDPE pipe of dia of 40mm polyethylene (PE) with smooth internal and profiled external surface for non-pressure for underground cable including bends complete all as specified and directed Make : '' Astral ,Prince,Rex Polyextrusion Ltd, Finolex, Supreme.

Excavation in trenches not exceeding 1.5 m width and not exc 1.5 m in depth and getting out in hard rock for removing/laying of UG cables / Pipes etc complete all as specified and directed.

Material & Labour for Returning, filling including spreading levelling watering and well ramming in layers not exceeding 25 Cm thickness using excavated soft integrated soil complete all as specified and directed.

Material & Labour for Removing excavated material n.exc 50 m and depositing where directed at a level not exceeding 1.5m above the starting point for soil complete all as specified and directed.

Supply and laying GI 40 mm bore tubing light grade for protection of cable fixed in wall or laid in trenches including taking down the existing one complete all as specified and directed. Make:- Tata/Jindal/Prakash/Surya.

Material & Labour for earthing in repair complete with galvanized steel earth plate electrode of size 60cm x 60cm x 6mm thick buried directly in ground vertically at a depth not less than 2.25 metre deep below normal ground level with top edge of the plate not less than 1.5 metre below normal ground level surrounded from all sides by 15 cm thick packed layer of charcoal dust and common salt, filling in alternate layer and electrode connections by using galvanized iron earth lead wire 4 mm dia by means of bolts, nuts, check nuts and washers made of galvanized iron or steel and protected by light grade 15 mm dia GI pipe connected to main switch board or main control board, and GI pipe light grade 20 mm bore for watering and including funnel, wire mesh, RCC pit cover and PCC chamber pit with PCC 1: 2: 4 type C2 including excavation and earth work, disposal of surplus soil to a distance not exc. 50 mtr all as specified and as shown on Plate No 5 of SSR Part I (1991) complete all as specified and directed.

Supply & Fixing exhaust fan 240 V AC single phase complete with lovers and shutters 300 mm sweep including provision of flexible three core copper conductor cable of 23/0.0076 upto ceiling rose and grouting 04 Nos full threaded bolts and nuts etc complete all as specified and directed.

Supply & Fixing exhaust fan 240 V AC single phase complete with lovers and shutters 200 mm sweep including provision of flexible three core copper conductor cable of 23/0.0076 upto ceiling rose and grouting 04 Nos full threaded bolts and nuts etc complete all as specified and directed. Make: Havells/Cromption/Bajaj.

Material & Labour for making opening/hole suitable for fixing exhaust fan 300 mm sweep including wooden bedding for fixing of exhaust fan and plastering finishing and making good the existing surface complete all as specified and directed. Make: Havells/Cromption/Bajaj.

Supply and fix in replacement louvers of exhaust fans and to be covered with galvanised mild steel wire mesh banded fixed with wooden beading of size exceeding 3 sqcm and n.exc 6 sqcm using 2nd class hard wood all around the opening of the exhaust fan fixed with nuts and bolts suitable for 300 mm sweep exhaust fan complete all as specified and directed.

Supply and Fixing load line DB Double door including MCCB 63 Amps including dismantling of existing panel of wall and fixing new load line box and doing the existing connection in new load line with SP ,SPN ,TPN ( SP ,SPN ,TPN measured and paid Separately plaster with necessary bricks and Cement required at Site and matching the existing surface with Colour including in unit rate complete all as specified and directed. Make: Havells/C&S/Schnieder

elite enterprises

N VENKATESWARLU

Tara Construction

industrial suppliers