NIT No. 28, Item No. 16

S/o Double flanged G.I pipe of 50 dia medium class each of 3 mtrs long duly threaded on both ends welded and fitted with G.I flange on both ends having the slot for sub cable. .Make:- Tata/Jindal

S/o PVC insulated PVC sheathed flat cable with plain copper conductor having 3 core for submersible motor of 4 sq mm size (Each roll of 100 mtrs). Make:- Gloster/Havells/DJB approved

S/o MCCB 32 Amp, 4 Pole, Breaking capacity at 415 V: 25 KA, adjustable thermal setting (70- 100%) and fixed magnetic settings. Make:- Havells/Standard/ L&T

S/o Hut type electrical feeder pillar/metal board of welded construction of size 1370mm x 760mm x 460mm fabricated with 16 SWG M.S. sheet, having horizontal and vertical intermediate chamber of suitable size on suitable size insulating board to make the Panel Robust, having S.S hinges along with double locking arrangement, having fabricated MS angle iron( 50 mm x 50 mm x 6 mm) frame for mounting of switch gears such as RCCB, MCCB, Starter, Ampere meter, Volt meter and electrical energy meter etc i/c powder coating painting, Vermin proof.

Providing of protection assembly having earth leakage protection, phase sequence corrector, single phase protection, Over Load protection, high voltage – low voltage protection, time delay power on programmable time switch (i.e. RYB phase and facility to change over from automatic to manual & vice versa.) upto 10 HP. Make :- DJB Approved

S/o tail piece of the medium class G.I. pipe 500 mm long with one end threaded as per outlet of pump & another end flanged as per size of G.I. pipe 50mm dia. Make of pipe: TATA/Jindal

S/o M.S. clamp of 600mm length duly fabricated from 12.5mm thick 75mm wide M.S. plate for holding the pipe of 50mm dia.

Supply of bore cover approx size 1’x1’ made out from 6mm thick M.S. sheet in 2 halves & a circular hole in centre 2-1/2” dia with locking arrangement by Nuts & bolt

S/o G.I.900 x 50mm dia. bend having flange at both ends (Heavy duty)

S/o MS nut bolts off size as per requirement

S/o rubber packing 50mm dia flange

Lifting & lowering of sub pump set along with all allied accessories from T/wells i.e. dismantling of column pipes by opening/cutting of nut and bolts as required, opening and re-jointing of cables. Testing commissioning of T/well after lowering as per site requirement. The work including all arrangement of man and tools tackles such as tripod, chain pulley pipe wrench etc.

ARIHANT ENGINEERS AND TRADERS

P.K. Electricals

Raj Engineering Co.

paramount systems

Shakti Trading Co.