INSTALLATION OF DECORATIVE POLES ON PATEL MARG MAIN ROAD AND WORK OF UNDERGROUNDING HT/LT LINE YEAR 2025-26

Amount

Feeder Pillar: P&F of Feeder Pillar Box for Street light made out of CRCA Sheet of 10/12 SWG of size 650X450X400 mm duly Paint with powder Coating Paint of grey Colour. With fixing frame made out of ms Angle of Size 25x3 mm of required size and height. Feeder Pillar Shall baove following material. 1 RYB Indicator - 3 no 2-MCCB 63 Amp four pole 1 No 3 MCB 16 Amp single pole 8 No 4 Aluminium busbar 25x4 mm of Required Size 5 With Locking Arreangement and all required Glend, lugs of Cable Size 6- Earthing Terminal- 1 Nos.

Main Qubical Panel with ccms matrix/schnell make CCMS 10 KVA P&F of Main Qubical Panel Box for Street light on/off system made out of CRCA Sheet of 10/12 SWG of size 1500X1200X500 mm duly Paint with powder Coating Paint of grey Colour. With fixing frame made out of ms Angle of Size 35x4 mm of required size and height. Feeder Pillar Shall baove following material. a RYB Indicator - 3 No ,b-MCCB 100 Amp four pole 1 No, c MCB 63 Amp four pole 6 No, d Aluminium busbar 35x4 mm of Required Size e With Locking Arreangement and all required Glend, lugs of Cable Size f- Earthing Terminal- 1 Nos., g. Features of ccms penal install in main qubical panel are as under, h Schedule the timing of lights (pre-programmed based on astronomical clock or on field or through central control) i. CCMS shall able to measure Voltage, Current, Power Factor, Active Power, Apparent Power, Metering Cumulative Active Energy, Metering Cumulative Apparent Energy., 1. Enclosure should be made of fire retardant FRS/SMC material, 2. Communication – GSM/GPRS communication between CCMS and Cloud server 3. Alerts –, i. Phase wise over current/Short circuit ii. Phase wise over voltage, iii. Group failure of lights, iv. No input supply v. Tempering of door, vi. Low Power Factor Detection. Vii. Under load and over load detection.4. Energy-meter – 1 phase Class 1.0 accuracy meter with ISI/IS-13779 Secure / L&T Make 5. Battery Backup – CCMS supports battery backup up to 10 hours., 6. CCMS Unit shall have analog measurement capability 1 x Analog voltage, 1 x Current input measurement channels 7. Switch gear protection against fast grid switching, overall protection against short circuit and overload., 8. CCMS shall have manual operating switch in case of failure of CCMS controlling unit. 9. Local storage for 30 Day using inbuilt EEPROM, 10. Google maps overlay for live status monitoring of CCMS., 11. Total monthly/weekly/daily power consumption, on time and saving info., 12. Configuration for user hierarchy from the GUI. 13. Incomer : MCB 63 Amp,Latch Relay : 60 Amp, Outgoing MCB : 63 Amp 14. SPD : 440 Volts Parallel SPD 20 KV 15. All Switchgears should be L&T/ABB/Scheinder Make

9000 MM Height High Mast Pole made of circular fluted mild steel pipe of three sections (grade YST 210), Bottom section 132 MM Dia x 3 MM thick with 3000 MM Height including Cast Iron Base Pedastal, Middle section 107.0 MM Dia x 3 MM thick with 2000 MM Height, one secation of 89 mm dia x 3 MM thick with 3000MM Height and Top section 76.0MM Dia x 3 MM thick with 1000 MM Height. Decorative cast aluminium cone (230mm Dia x 150mm Height) covered on the bottom and middle section joint area & Decorative cast iron cone covered on the middle and top section joint area. Decorative base made of cast Iron minimum (380mm Square x 1000mm Height) with Service Door 432 MM Height x 102 MM Width. The artistically curved arm made of MS pipe 38.1mm Dia x 2mm thick, spruced up with MS Scroll with gravity die cast aluminium floral and decorative embellishment, is firmly held to the stem by way of cast iron clamps and the arm bears cast iron knobs at one end and other end to facilitates the fitment of luminaries at 1000 MM from the vertical axis of the bracket stem. Pole section welded by certified welders using high end MIG welding processes. The control gear tray is prewired with 2.5 Sq.mm cable, 6A MCB and 32A terminal connectors for loop-in / loop-out arrangement. Any other internal cables and connections shall not be covered in the scope of supply. Mild steel mounting plate 550 MM Square x 16mm thick Steel of grade E250 to IS 2062: 2011 with 4 elongated holes 30 x 50 to suit M24 x 750 MM Bolts of grade 4.6 at CC 215. This mounting steel plate along with foundation bolts of suitable size to be used for ensuring firm grouting into the specially designed foundation. All dimensions are within +/- 3% tolerance. After fabrication, entire pole is De-rusted/ shot blasted. The pole is coated with H Primer and epoxy zinc phosphate primer and finished using environmentally stable polyurethane-based paint (coating thickness 60-80 microns). The Pole shall be provided with Graphite grey / Anthracite grey /Black or in Anique Finish as standard colour options.

8 Mtr. Height Double Arm Pole made of circular fluted mild steel pipe of three sections (grade YST 210), Bottom section 132 MM Dia x 3 MM thick with 3000 MM Height including Cast Iron Base Pedastal, Middle section 107.0 MM Dia x 3 MM thick with 2000 MM Height and Top section 76.0MM Dia x 3 MM thick with 1500 MM Height. Decorative cast aluminium cone (230mm Dia x 150mm Height) covered on the bottom and middle section joint area & Decorative cast iron cone covered on the middle and top section joint area. Decorative base made of cast Iron minimum (380mm Square x 1000mm Height) with Service Door 432 MM Height x 102 MM Width. Double Arm Bracket stem made of MS Pipe 60.3mm Dia x 2.6mm thick, emerging from a Gravity Die cast Aluminium embellishment up to a height of 1500 MM. The artistically curved arm made of MS pipe 38.1mm Dia x 2mm thick, spruced up with MS Scroll with gravity die cast aluminium floral and decorative embellishment, is firmly held to the stem by way of cast iron clamps and the arm bears cast iron knobs at one end and other end to facilitates the fitment of luminaries at 1000 MM from the vertical axis of the bracket stem. Pole section welded by certified welders using high end MIG welding processes. The control gear tray is prewired with 2.5 Sq.mm cable, 6A MCB and 32A terminal connectors for loop-in / loop-out arrangement. Any other internal cables and connections shall not be covered in the scope of supply. Mild steel mounting plate 550 MM Square x 16mm thick Steel of grade E250 to IS 2062: 2011 with 4 elongated holes 30 x 50 to suit M24 x 750 MM Bolts of grade 4.6 at CC 215. This mounting steel plate along with foundation bolts of suitable size to be used for ensuring firm grouting into the specially designed foundation. All dimensions are within +/- 3% tolerance. After fabrication, entire pole is De-rusted/ shot blasted. The pole is coated with pure polyester powder coating or epoxy zinc phosphate primer and finished using environmentally stable polyurethane-based paint (coating thickness 60-80 microns). The Pole shall be provided with Graphite grey / Anthracite grey /Black or in Anique Finish as standard colour options.

Classic look LED Street Light / Post Top Luminaries (approved by department) System power consumption 80W(nominal), Colour temperature 3000K(WW)/5700K(CW), Colour rendering index(CRI) =70. Fixture is designed with a classic look and using new generation technology in LED to enliven your outdoor areas in perfect synchronization with functionality and aesthetics. Family of Street Light / Post-Top lanterns designed to complement the geometry of the area with heritage touch. Operating temperature 50 °C. Operating voltage range: 140 V -270 V. Average life L70B50: 50000 hours. Housing is elegantly designed pressure die casted heat sink for efficient thermal management and sturdiness. Luminaries finish is UV protected pure polyester powder coated grey with Phosphochromate treatment. Luminaries is with PC lens to ensure better uniformity of light distribution. High efficiency long life LED module with SMD LED package mounted on MCPCB. Lumen efficacy of LED >120 lm/W and viewing angle of 120° to ensure better uniformity. Total System Lumens 10,000 lm (Nominal).Fixture THD= 10%, Power Factor>0.95, Fixture dimension Dia 620 ±2% mm, height 650 ±2% mm, mounting pole inner dia 41mm ±2%. Fixture is with IP66 protection rating, Fixture driver is Built in potted electronic LED driver with APFC, Open Circuit Protection, over Voltage protection, Surge Voltage Protection up to 10kV With Built-In SPD & other safety test as per 15885 Part-2/Sec 13. The lighting design is able to meet average Lux level of 35 Lux with maintenance factor 0.80. Lm79 & LM80 reports, BIS Certificates, test reports to be provided from approved NABL Lab.

Bidder Name

Amount

Jyoti electronics (GSTN-08AAPFJ3349G1Z2) BID ID -3204314

ENGINEERING SOLUTIONS (GSTN-08AQEPK4396H1ZJ) BID ID -3205554

Prince Enterprises (GSTN-08CEHPM7643QIZM) BID ID -3205593

Description of Work / Item(s)

Amount

Dismentling of Composite HT Weasel ACSR conductor including all other items and deposite at nagar nigam greater store/jvvnl store as per direction by site engineer.

SITC of 11kV 630 Amps 21KA for 3 Sec. SF6 insulated, outdoor duty (IP54) , Extensible type Ring main unit (RMU) manually operated in combination of VCB modules consisting of Copper busbar in SF6 insulated 304 (Non Ferrite Non-Magnetic Grade) stainless steel enclosure of thickness 2.5mm with manometer. The HV switchgear and control gear should be confirming to IEC-62271-100, IEC-62271-200-2003 & IEC-60694-1996. The RMU should be internal arc tested for 21KA for 1Second with IAC-AFL classification for gas tank. Vacum Interrupter of VCB should be RMU Manufacturer’s own make. Each feeder of RMU should have voltage presence indicator. . and compring of followings:- 1 no. microprocessor based Self powered numerical relay with over Current/ earth fault & short circuit protection with each VCB feeder. - 3 Nos. Protection CT shall be of Burden 2.5VA, ratio 50/1A, Class of Accuracy class 5P10 for O/C and E/F protection for each VCB.- 1 No. Manometer for each tank,- 1 nos. Fault Passage indicator,-Right angle boots for all the feeder Modules All the type test certificates as per IEC from Third party NABL / CPRI / ERDA accrediated lab to be submitted. (Cost of RCC Foundation / Steel Structure to be paid Extra) All as per pre approved by Engineer in-charge.

ENGINEERING SOLUTIONS (BID ID -3205554)

Jyoti electronics (BID ID -3204314)

ENGINEERING SOLUTIONS (BID ID -3205554)

Prince Enterprises (BID ID -3205593)

ENGINEERING SOLUTIONS (BID ID -3205554)

Jyoti electronics (BID ID -3204314)

Jyoti electronics (BID ID -3204314)

ENGINEERING SOLUTIONS (BID ID -3205554)