REPAIR MAINT TO DRAIN CULVERT FENCING HARDSTANDING FOOTPATH COMP WALL AT RIFLE RANGE TRG AND HFFR AREA AND REPAIR REPLACE TO FLOORING PLASTERING PLUMBING JOINERY SANITARY FITTING AND CERTAIN OTHER CONNCTED WKS IN ZONE D OF AGE BR I UNDER GE MIS MHOW

Amount

M&L for Brick work with sub class 'B' bricks with using Modular size Brick , straight or curved on plan exc 6m mean radius built in CM 1:6 including dismantling of existing brick work complete all as specified

All as per item No 11 above but except bricks dismantling of existing brick work complete all as specified .Note:Serviceable bricks obtained from dismantling shall be reused.

Taking down cement or cement lime plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water etc.complete

M & L for rendering 15mm thick plaster in CM (1:6) on faces of brick work or concrete surfaces, finished even and smooth without using extra cement complete all as specified

M & L for rendering 15mm thick plaster in CM (1:4) on fair faces of brick work or concrete surfaces, finished even and smooth without using extra cement mixed with Dr fixit pidiproof LW 200ml/50Kg of cement complete all as specified and directed. Note: WPC shall be measured and paid separately under relevant item.

M&l for rendering 10mm thick in cement mortar 1:3 on ceiling / concrete surface mixed with Dr fixit pidiproof LW 200ml/50Kg of cement and finished even and smooth without using extra cement complete all as specified and directed. Note: WPC shall be measured and paid separately under relevant item.

Supply ony liquid water proofing compound

M&L for complete removal of existing treatment from wall /roof projections including facis, cornics etc and scrapping internal surfaces by using mechanical sander (having mechanical vaccum mechanism) with sanding pad of appropriate grit to make surface clean, free from dust, loose paint etc and external surface by using Jet washer and appropriate skilled labour complete all as specified and directed.

M&L for applying two coats of 100% Premium arcylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance , dirt resistance exterior paint of required shade over and including priming coat of exterior primer by using proper spraying machine including preparation of surface complete all as specified and directed Note: - (a) Application of Primer and emulsion shall be carried out through air less spray machine (Mechanical method (b) Wall care putty (if required at site before application of above painting at a certain portion of area ) shall be done and same shall be measured and paid seperately under relevant

M & L for applying two coats of Acrylic Emulsion having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour over and including a coat of primer by using proper roller and applying 1mm thick wall care putty complete all as per Manufacturer's instruction including preparation of surface complete all as specified and directed. Note: (a) Application of Primer and distemper shall be carried out through Roller (Mechanical methoad) (b). Wall care putty (if required at site before application of above painting at certain portion of area) shall be done and same shall be measured and paid seperately under serial item No 02

M&L for Preparation of new plastered surfaces of walls and applying two coats of cement base paint over a coat of white wash complete all as specified

M&L for Preparation of old plastered surfaces of walls and applying two coats of cement base paint complete all as specified

M&L for glazed ceramic coloured tiles 450X300X 6mm to 7mm thick as in vertical surface as in skirting/dados , set and jointed in neat cement slurry and pointed in coloured cement to match with colour of tile over and including 10 mm thick rendering in CM 1:4 complete all as specified

M&L for non skid ceramic coloured tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exc 0.18 sqm in floors etc set and jointed in neat cement slurry and pointed in coloured cement to match with colour of tile over and including 15mm thick screed bed in CM 1: 6 complete all as specified

M & L for Scratch free,double charged, vitrified ceramic tiles 600X600mm size 9 to 10mm thick in floors jointed in neat cement slurry and ponited in coloured cement to match with colour of tile over and including 15mm screed in CM 1:6 including dismantling of old tiles complete all as specified

All as per item No 15 above but in skirting over & including 10mm thick rendering in CM 1:4 including dismantling of old tiles complete all as specified

Demolition of Stone slabs and tiles of any description or thickness in floors complete all as specified and as directed.

M&L for 20mm thick Granite (of any type) work (table rubbed and polished and exposed visible edge moulding /rounding ) in steps, jambs, pillars, window cills, cooking platforms and like in 15mm thick cement mortar (1:4) including pointing with white cement (1:2) mixed with marble dust and admixture of pigment to match with shade of granite complete all as specified

M & L for machine cut kota stone slab in flooring 20-25mm thick laid over and including 15mm thick screed bed in CM 1:6 & cement mixed with pigment to match the shade of slab including rubbing and polishing complete all as specified

All as per item no 19 above but in skirting including 10mm thick backing coat in CM (1:4 ) complete all as specified

M&L for chequered cement concrete tiles with grey cement and pigment of size 40cmX40cmX30mm thick (Glosy finish) ,set and jointed and pointed in neat cement slurry in floor etc over and including 15mm thick screed bed in CM 1:6 complete all as specified

M&L for machine pressed rubber moulded precast concrete interlocking paver block (glosy finish) any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade with grey cement and pigment laid on 50 mm thick stone dust cushioning laid dry to the profile including dismantling of existing paver block / tile of any description complete all as directed. Note: Sand cushioning shall be measured & paid seperately under relevant item.

M&L for machine pressed rubber moulded precast concrete interlocking paver block (glosy finish) any shape and size confirming to IS 15658-2006 of 80 mm thickness, M-40 Grade with grey cement and pigment laid on 50 mm thick stone dust cushioning laid dry to the profile including dismantling of existing paver block / tile of any description complete all as directed. Note: Sand cushioning shall be measured & paid seperately under relevant item.

M&L for Stone dust filling under floors 50mm thick including watering and consolidation.

Providing and laying factory made kerb stone of M-25 grade cement concrete of required size and laid in position to the required line, level, and curvature, jointed in cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making necessary opening to drain water wherever required complete all as specified and directed.

Demolition of cement concrete (unreinforced) in ground floors and paving n exc. 15cm thickness (below or above ground level) complete.

M & L for 100mm thick PCC 1:4:8 type D2 using 40mm graded stone aggregate in foundations, filling, and mass concrete complete all as specified

M&L for 75 mm thick PCC 1:3:6 type C2 using 20mm graded stone aggregate as in plinth protection,finished the surface of concrete topping even and fair (without using extra cement) including making joint at every 3 m interval and at corner and filled with mixture of bitumen and sand , laid in alternate bays complete all as specified and directed.

M & L for provide PVC spout pipe of 25mm bore & 45cm length in sunken floor including cutting holes in brick walls built in cement mortor and making good the dismantled portion in PCC (1:2:4), type B1 using 20mm graded stone aggregate complete as directed and specified.

M & L for cutting holes in brick walls built in cement mortar at the starting point of down take soil/waste pipe at any floor, fill the joint of down take pipe & trap with thick mortor in CM 1:3 and making good the dismantled portion in PCC (1:2:4), type B1 using 20mm graded stone aggregate complete as directed and specified.

M&L for removing the existing APP membrane roof treatment of any description including screed bed /plastering of any thickness and removing the debris outside MD land etc. and carrying out the following roof treatment complete all as specified and as per Manufacture's instruction (a) Cleaning the existing roof surface and brushing with neat cement slurry @ 3 Kg per Sqm area al as specified (b) Rendering 15mm thick in cement mortar 1:4 mixed with integral water proofing compound and finish the surface even and smooth without using extra cement (c) Preparation of surfaces for applying bituminous primer (conforming to IS-3384-1965) @ 0.40 Kg/Sqm (d) Cutting out cracks to V- section in existing roofs or terracing, cleaning out, wetting, grouting with cement and sand slurry 1:3 complete all as specified. (e) Applying two coats of tack coat of Industrial bitumen grade of 85/25 at the rate of 1.2 Kg per sqm including cleaning surfaces (1st coat as a bonding material below membrane and 2nd coat on top of membrane

(f) APP based polymeric membrane 3mm thick and minimum weighing 3kg/sqm and reinforced with polyster non wove fabric (weight not less than 150 gms/sqm) land on primed surface by forced application complete all as specified and as per Manufacturer instruction (g) Applying two coats of bitumen based aluminium paint @ 0.15 Kg/Sqm for each coat over APP membrain including preparation of surface complete all as specified

M & L for repair to sunken floor by provide water proofing treatment to sunken floor surfaces of RCC slab by the following specifications as specified and directed :- (a) Demolition of old sunken surfaces complete and cleaniong of all loose particles and apply cement slurry @3.00 kg / sqm on old surfaces by brushing. (b) Provide PCC 1: 1.5:3 type A with using 12.5mm graded stone aggregate in slope of average thickness 50mm on sunken floor slab mixed with and including integral water proofing compound manufactured by Dr FIXIT or equivalent as approved, finish the surface even & smooth without using extra cement. (c) Rendering 15mm thick in CM 1:3 mixed with & including integral water proofing compound on sunken floor and sides of (Vertical surface) sunken portion. (d) Applying surfaces of bituminous primer (conforming to IS-3384-1965) @0.40 Kg/Sqm complete. On complete sunken surfaces of floor & wall and provide necessary connections to soil/waste pipe from WC/ nahani trap etc including demolition of old sunken complete all as specified and as directed. (e) After laying of all sewage/plumbing pipes with fixtures in position, apply two coats of polymeric based chemical as per manufactures instructions over bottom and sudes of sunken portion upto 600 mm height.

(f) APP based polymeric membrane minimum weighing 3kg/sqm and minimum 3mm thick reinforced with plyester non wove fabric (wt. not less than 150 gms/sqm) land on primed surface by forced application complete all as specified and directed. (g) Fill the sunken floor with PCC 1:5:10 type E-2 using brick aggregate. (h) Fixing of 50 mm dia CPVC pipe projecting 450 mm clear of face outer wall shall be provided to drain out seepage water if any. (i) S& F of 400X400mm size coloured Non skid tiles and including over a 15mm thick screed bed CM (1:6) (j) Testing of sunken as per specification mentioned in SSR part-I/ P.S. (NOTE : Floor Area shall be measured for payment).

S&F in repair of vitreous china squatting Pan “Orissa” Pattern, of size 580mm x 440mm white with integral foot rests (excluding flushing cistern and flush pipe) including provision of cement concrete bedding complete all as specified

Supply and fix in repair of wash hand basins, vitreous china,of size 550x400mm (flat back, or angle back type) including cutting for and pinning in ends of brackets or erecting stand exclusive of fixing of supply and waste pipe etc complete all as specified

S&F in repairs of pedestal pattern Vitreous china wash down water closet pan white colour, with PVC 'P' trap including necessary jointing of front or back inlet, connection to drain (or outgoing pipe ) and to flushing pipe antisyphonage pipe and plastic water closet seat cover white complete all as specified

S&F in repair of Vitreous China uninal bowl, half stall type ,coloured with PTMT urinal spreader for fixing with 15 mm dia pipe / union for discharge pipe, , providing and fixing plugs, bedding urinal against the wall in cement mortar (1:2), securing urinal to plugs with and including 60mm long steel screws, pointing around the urinal back in coloured cement to match with urinal complete all as specified

S&F in repairs health faucet with S.S. flexible pipe of 1.00 metre length including holder complete all as specified

S&F in repairs chromium plated jet for EWC including 1.00 metre S.S pipe and necessary GI fitting as required such as ,nipple etc all as specified and directed.

S&F in repairs fancy type chromium plated two way bib cock of 15mm bore ,screwed for iron pipe or brass ferrule etc complete all as specified

S & F in repair CP brass fancy type 15mm bore bib tap, screwed down , and screwed for iron pipe or for brass ferrule complete all as specified

S&F in repair 15mm bore pillar taps, cast copper alloy with capstan heads, chromium plated,fancy type screwed down high pressure with or without lettered “HOT” or “COLD” with long screwed shanks and fly nutscomplete all as specified

S&F in repair 15mm bore, 450mm long, PVC connections with brass unions internally threaded both ends complete fixed to iron pipe at both ends complete all as specified

S & F in repair of CP fancy type stope valves ,cast copper alloy, screwed both ends for iron pipe or for union of 15mm bore complete all as specified

S&F in repair CP fancy type angle valves,cast copper alloy, screwed both ends for iron pipe or for union of 15mm bore complete all as specified

S & F in repair of CP fancy type Stop Valve ( Concealed type),cast copper alloy, screwed both ends for iron pipe or for union of 15mm bore complete all as specified

S & F in repairs CP Brass Fancy type shower rose 75 mm dia with 125mm long CP Nipple of approved quality complete all as specified

S&F in repair CP Toilet paper holder complete all as specified

S&F in repairs towel rail 600mm long 20mm dia brass chromium plated fixed with wooden guilties embedded in cement mortar (1:3) with MS screws etc complete all as specified

S & F in repair LDPE pipe 32mm bore fixed to wall/ceiling with bends/elbow complete all as specified.

S&F in repair of stainles steel gratings round type of size 150mm (Minimum weight 100 gms) complete all as specified

S & F in repairs 10 litres capacity PVC flushing cistern, low or high level, with inlet, ball valve, syphonic action type, float and handle, PVC Flush pipe, pull or push type including brackets complete all as specified

S & F in repair 25mm bore ball valve high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe complete all as specified

S&F in repairs PVC waste pipe fixed to any type of coupling of length n.exc 1.50 m complete all as specified

S&F in repair rotational moulded polythylene water storage tank of 500 litres capacity, double layered (cylindrical / vertical with closte top) hoisted and fixed in position all as specified in SSR Part-I including providing and fixing PTMT ball valve high pressure with polythene float and fly nut, 20/25mm bore complete

S&F in repair rotational moulded polythylene water storage tank of 1000 litres capacity, double layered (cylindrical / vertical with closte top) hoisted and fixed in position all as specified in SSR Part-I including providing and fixing PTMT ball valve high pressure with polythene float and fly nut, 20/25mm bore complete

S&F in repair rotational moulded polythylene water storage tank of 2000 litres capacity, double layered (cylindrical / vertical with closte top) hoisted and fixed in position all as specified in SSR Part-I including providing and fixing PTMT ball valve high pressure with polythene float and fly nut, 20/25mm bore complete

M&L for cleaning & removing all scale and dirt etc from tank and from mouth of circulating pipe etc of 500 litres capacity complete all as specified.

M&L for cleaning & removing all scale and dirt etc from tank and from mouth of circulating pipe etc of 1000 litres capacity complete all as specified.

M&L for cleaning & removing all scale and dirt etc from tank and from mouth of circulating pipe etc of 2000 litres capacity complete all as specified.

S&F in repair PVC tank Cover suitable for OHT of 500/1000 Litres capacity complete all as specified and directed.

S&F in repair gun metal gate valves 20/25 mm with lever arm screwd both ends for iron pipes complete all as specified

S& F in repairs sheet glass shelf assembly, approved make, consisting of 5.5mm thick sheet glass shelf 60mm wide with chromium plated bracket guard and railing 500mm long complete all as specified

S&F in repair PVC (SWR) floor trap 75mm dia of out let ,plain with grating including jointing with solvent cement complete all as specified

S & F in repair PVC body bathroom cabinet of size 550 x 450mm with mirror 5.5mm thick complete all as specified.Make :Prayag & Model No 555 or other equivalent as approved by GE.

S & F in repair plastic water closet seat cover white closed pattern with flat bottom and cover with mild steel/ chromium plated or aluminised hinging device complete all as specified

S&F in repair 110mm bore of PVC (SWR) pipes single socketed in any length with rubber ring joints laid on wall / floor with clip complete all as specified

S&F in repair 75mm bore of PVC (SWR) pipes single socketed in any length with rubber ring joints laid on wall / floor with clip complete all as specified

S&F PVC (SWR) branch piece, single (Single Y) equal or unequal 110mm size

S&F PVC ( SWR) bends any radius bore of 110 mm

S&F PVC ( SWR) bends any radius bore of 75 mm

S&F in repair PVC 150mm rain water pipe single socketed in any length with rubber joints fixed to wall up to (G+3) story building complete all as specified

S&F in repairs 25mm dia Stailess steel curtain rod with brackets as approved by GE complete all as specified

Taking up or down steel tubing 15mm bore & connections and S&F GI tubing medium grade with all fittings & fixed complete to walls /ceiling or laid in floors complete all as specified

Taking up or down steel tubing 20mm bore & connections and S&F GI tubing medium grade with all fittings & fixed complete to walls /ceiling or laid in floors complete all as specified

Taking up or down steel tubing 25mm bore & connections and S&F GI tubing medium grade with all fittings & fixed complete to walls /ceiling or laid in floors complete all as specified

Taking down door shutter with frame n.exc 1.5 Sqm each without taking of shutter from the frame complete all as specified

S&F in repair factory made steel window , with side hung shutter including projecting hinges with steel handle, stay complete with glazing bar and guard bar devetailed or welded complete all as specified.

S&F in repair factory made steel window , with side hung shutter including projecting hinges with steel handle, stay without glazing bar and guard bar dovetailed or welded complete all as specified.

S&F PVC door frames of sizes 50 x 47 mm made out of 5 mm prelam PVC sheet reinforced with MS Square tube in opening of suitable size complete all as specified and directed.

S&F Factory made (Prelam on both sides) solid panel PVC door shutter 30 mm thick (Style) consisting of frame made out of MS tubes for top and bottom rails, MS frame shall covered with heat moulded prelam PVC 'C' channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for styles and prelam PVC sheets for top rail, lock rail and bottom rail in either side and as gap insert for top rail and bottom rail pannelling of prelam PVC sheet to be filled in the MS welded/sealed to the styles and rails with suitable PVC sheet beading and jointed together wiht solvent and fixing in the frame at site as per specification and drawing complete all as specified and directed.

Taking down shutters of any description area exceeding 1.00 Sqm but not exceeding 2.0 Sqm all as specified

S&F 35mm thick second class hard wood glazed and skeleton shutters, open rebated and prepared to receive glass, gauze etc. (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc.; size of members of shutters as specified in SSR Part – I, Section – 8, clause 8.24(a) ; supplied and fitted to chowkats all as specified Note :- Glass pane and wire mesh shall be measured and paid separately under relevant item

S&F second class HardWood shutters 35mm thick, plain framed panelled shutter factory made (two panel) with lock rail & panel of 9mm BWP commercial ply or 12mm veneered particle board with commercial veneering on both faces. The size of rail and style as per IS:1003 complete all as specified

S & F galvanised MS wire cloth 0.56mm nominal dia of wire and average width of aperture 1.18mm fixed with tinned tacks or galvanized wire staples, fixing and nut complete all as specified

S & F in repair galvanised MS wire cloth 0.56mm nominal dia of wire and average width of aperture 1.18mm fixed with tinned tacks or galvanized wire staples including taking out old wire mesh from steel window and fixing old steel flats and nut complete all as specified and directed.

S & F figured glass 3mm thick pin head type and glazing with oil putty and securing with glazing pins not exceeding 0.50 Sqm each pane including of hacking out of old glass pan (Up to G+3 stored building) complete all as specified and directed

S & F sheet glass 3mm thick pin head type and glazing with oil putty and securing with glazing pins not exceeding 0.50 Sqm each pane including of hacking out of old glass pan (Up to G+3 stored building) complete all as specified and directed

S & F 100mm long aluminium alloy butt hinges with galvanised mild steel hinge pin,anodised and fixed B-22

S & F in repair 100mm long aluminium alloy butt hinges with galvanised mild steel mild steel hinge pin,anodised and fixed B-22

S & F in repair 100mm long butt hinges medium weight cold rolled mild steel

S&F for 150 mm long Aluminium anodized barrel tower bolts of extruded section

S&F in repair 150 mm long Aluminium anodizes barrel tower bolt of extruded section

S&F 150 mm size aluminium anodized handle

S&F in repiar 150 mm size aluminium anodized handle

S & F in repair of mild steel ordinary rat tail rod pattern spring 300mm size including roller & roller plate complete all as specified

S & F in repairs of aluminium floor door stoppers double legged length 140mm with hard drawn steel spring fitted in floor complete all as specified

M&L for preparation of new wood surfaces of any description over 10cm in girth or width and applying two coats of synthetic enamel paint over a coat of primer complete all as specified

M&L for painting with two coats of synthetic enamel paint over a coat of red oxide primer to steel surfaces of any description over 10cm in width or girth including preparation of steel surfaces complete all as specified

S&F in repair 25mm thick block boards grade 2 quality, interior grade, commercial type as in shelves and partitions of cup boards fixed with screws to under frame work inculding 6 mm thick teak wood lipping edging on all sides complete all as specified and directed.

M&L for 19mm thick priliminated particle board both sides with decorative choice including necessary second class hard wood 6mm edging for cup board all as specified

S&F second class hard wood plain solid straight chowkhats and frames,wrought framed rebated on the solid,rounded or chamfered,put togather with glue pinned at joints all as specified and directed.

M&L for welding in repairs not exceeding 2.5 cm in length, to the metal not exceeding 6mm thick complete all as specified and as directed.

S&F aluminium door ( Powder coated ) frame of size 101.60 x 44.45 x 1.50 mm of approved manufacture fixed to floor, wall with real plug and screws and door shutter with partly glazed and partly particle Board with standard anodized aluminium frame member ,both side portion of door shutter in permanent fixing type and middle of part portion glazed and open shutter type door (including mortice lock, hydraulic door spring ISI marked as approved) door handle tower bolt, hinges and glass pane not less than 5 mm thick fixed with rubber gasket and aluminium beading/glazing clip of size 19.00 x 17.30 x 0.70mm (Weight 0.097 Kg/RM of both side) shutters with top, lock rail and vertical members of size 83.50 x 44.45 x 1.50mm and bottom members of size 114.30 x 44.45 x 1.50 mm complete all as specified and approved by Engineer-in-Charge

S&F anodised aluminium door shutters from approved manufacture ,fixed to door frame with real plug or screws ,door fully glazed (including mortice lock,hydrualic door spring ISI marked as approved) door handle tower bolt,hinges and sun protected glass pane not less than 5mm thick fixed with rubber gasket and aluminium beading/glazing clip of size 19 X17.30X0.70mm shutters with top, lock rail and vertical members of size 83.50X44.45X1.50mm and bottom members of size 114.30X44.5X1.5mm complete all as specified and approved by Engineer-in-Charge

S & F powder coated aluminium ventilator cross section conforming to IS 63.5x38.10x1.5mm consisting of two partions upper portion shall have louvers with 3mm thick pin headed glass and aluminium wire cloth 0.30mm nominal dia of wire and average width of aperture 1.56m fixed with aluminium beads and securing on outer face of frame and lower portion of ventilation shall be fixed with 3mm thick pin headed glass with IDPE rubber gasket including aluminium beads, including preparation of jambs all around in CM 1:3 finishing even and smooth complete all as specified and approved by Engineer-in-Charge

S&F double action floor spring hydraulically regulated made of minimum 1.25mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty complete all as specified

S&F in repairs aluminium (extruded section) body door closer hydraulically regulated, designation No.3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed complete all as specified

S&F in repair to steel rolling shutters thickness of lath in 1.25mm with ball bearing,as specified including top cover,anchoring rod,hasp and staple and one shop coat of primer ercted in position as indicated,complete push pull or manual type and including safety lever locks mild steel with 4 levers for rolling and all as specified

S&F in repair mild steel work (Tubular, square/rectangular hollow section) as in purline, rafter and wind ties, cleat roof trusses etc including securing bed plate, plat iron fillets for securing wire mesh etc including all necessary drilling bolting or riverting, etc, and similar work conforming to IS 1161-1979 dge St-240 complete as directed and specified.

S&F in repair mild steel framed work Fe-410-W (Gde-E-250) quality-B as in doors or gates of angle or other section with gusset plates, rails braces, etc, complete, drilled for fixing of steel sheeting or other covering. Door, etc to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings ( exclusive of steel sheeting or other covering, running rail and guides) and hanging also fastening and fixing complete all as specified

S&F in repairs 0.50mm thick (total coated thickness) pre-colour, pre profiles Galvalume/zincalume sheets of required colour and design having tensile strength of 550 Mpa,zinc colour coating AZ-150 as in roof ,wall cladding,north light curves,fixed with zinc coated self drilling fastener including EDPM washer complete laid with one corrugation side laps and min 150mm end laps laid to slope all as per manufacturer/profile maker instructions complete all as specified and directed .

S&F in repair providing 25 mm thick precast cement concrete 1:2:4 type B0 using 12.5 mm graded stone aggregate as in louvers and jellies (measured solid), including all mouldings and precast frame set in cement mortar 1:6 complete all as specified

Dismantling posts or struts (wood, steel or R.C.C.) embedded in concrete,brick work,masonary etc. any section, including taking out embedded portion and making good disturbed ground complete all as specified

Excavating in post holes (or similar holes) each not exceeding 0.5 cum , getting out in soft/loose soil , returning, filling in and ramming earth or broken rubble mixed with earth around, in layers n exc. 25 cm complete all as specified and directed.

M&L for cement Concrete 1:3:6 type C2 using 40mm graded aggregate as in walls or retaining walls, any thickness, size or shape including pilasters, buttresses columns, pillars, boundary pillars & posts (incl caps & bases) complete all as specified and directed.

S&F mild steel hand rails, half round or other stock section hand-rail straight portion,drilled and countersunk for balusters running bars, nosing to steps including embedding in concrete and screwing etc wind ties for roof including securing bolts;posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 complete all as specified

S&F in repairs mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, exceeding 5cm long but not exceeding 10cm long and diameter of neck 5 to 10mm complete all as specified

S&F mild steel round bar 10 mm dia and over cut to length band to shape required including cranking, bending spirally for similar work conforming to Fe-410-W(Gde.E-250) quality-A or Fe 290(Gde-E-165) complete all as specified

S&F in repair Galvanised 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanized mild steel wire, staples or steel pins, etc. as directed (each line wire to be measured).

Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc.including provission of binding wire including dismantling of fencing wire mesh any type.

Supply chain link MS galvanised fencing, any size or type

Excavation in trenches n.exc 1.5m wide and n.exc 1.5m in depth for foundation,shafts, wells, cespits, manholes pier hold etc n.exc 10 Sqm on plan and getting out in soft / loose soil complete all as specified

M&L for PCC 1:4:8 type D2 using 40mm graded stone aggregate as in sub base of floor etc complete all as specified

M&L for PCC 1:3:6 type C1 using 20mm graded stone aggregate as in coping including necessary formwork etc complete all as specified

MS SHUBHAM SANTOSH JAIN

NIDHI CONSTRUCTION

APconstruction

sunrise enterprises