Construction of Ward Office Building at Mumbra

Amount

Excavation for foundation in earth, soil of all types, sand, gravel and soft murum, including removing the excavated material up to a distance of 50 m. beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (Lift upto 1.5 m.) By Mechanical Means

Excavation for foundation in earth, soils of all types, sand,gravel and soft murum, including removing the excavated material upto a distance of 50 metres beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (Lift from 1.5m to 3.0m) By Mechanical Means

Excavation for foundation in hard murum and boulders including removing the excavated material up to a distance 50 metres, beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (Lift upto 1.5m.) By Mechanical Means

Excavation for foundation in Hard-rock by controlled blasting including trimming and leveling the bed by chiselling where necessary and removing the excavated material and stacking it in measurable heaps within a distance of 50 metres. from the building area including dewatering and back filling with available earth soil /murum watering, ramming etc. complete. (Lift upto 1.5m) By Mechanical Means

Excavation for foundation in Hard-rock by controlled blasting including trimming and leveling the bed by chiselling where necessary and removing the excavated material and stacking it in measurable heaps within a distance of 50 metres from the building area including dewatering and back filling with available earth/murum watering, ramming etc. complete. (Lift from 1.5m To 3.0 m) By Mechanical Means

Excavation for foundation in Hard rock by chiselling, wedging, line drilling, etc. including trimming and levelling the bed, removing the excavated material upto a distance of 50 metres beyond the building area stacking as directed, dewatering and back filling with available earth/ murum watering, ramming etc. complete. (Lift upto 1.5 m). By Mechanical Means

Excavation for foundation in laterite rock (soft or hard) including trimming and levelling the bed for the foundation, removing the excavated material up to a distance of 50 metres beyond the building area, stacking as directed, dewatering and back filling with available murum, watering, ramming etc. complete. (Lift upto 1.5 m.) By Mechanical Means

Transportation of Excavated Materials within 1 Km

Transportation of Excavated Materials within 3 Km

Transportation of Excavated Materials within 5 Km

Transportation of Excavated Materials within 7 Km

Transportation of Excavated Materials within 10 Km

Transportation of Excavated Materials within 15 Km

Transportation of Excavated Materials within 25 Km

Providing dry/ trap/ granite/ quartzite/ gneiss rubble stone soling 15 cm to 20 cm thick including hand packing and compacting etc. complete.

Providing preconstructional antitermite treatment as per I.S. 6313(Part-II) treatment by treating the backfill in immediate contact with foundation at the rate of 5 litres of emulsion concentrate of 1.0 percent of clorophyrifos per square metre of vertical surface areacovering 10 years guarantee on bond paper. ANTI TERMITE TREATMENT

Providing and fixing 20 to 25 mm thick rough shahabad box type waterproofing for basement or underground floor on a base of Cement concrete 1:3:6, including sub base of 2.50 centimeter thick Cement mortar 1:3 with conceal, secrete (RMW), Algae proof or other alike waterproofing liquids, raking of joints upto 35 mm depth, filling the joints with 6 mm size crushed metal, hand grouting with cement slurry, curing and cleaning, with 7 years guarantee on court fee stamp of Rs. 100/- with ponding test etc complete. (excluding Cement concrete 1:3:6 base concrete) BOX TYPE WATERPROOFING (Horizontal)

Providing and fixing 20 to 25 mm thick rough shahabad box type waterproofing treatment to vertical outside faces of Reinforced Cement concrete walls of basement or underground floor including filling the gap of 25 mm between rough shahabad and R.C.C. walls with cement grout mixed with water proofing liquid Algae proof or other alike with one tile lift method, brushing the joints horizontally with cement slurry mixed with water proofing liquid for width 30 to 35 mm and sloping coping over topmost tile with cement mortar 1:3, butting the bottom most with Cement concrete 1:2:4 mixed with water proofing liquid, curing, with 7 years guarantee on court fee stamp of Rs.100/- with ponding test etc complete. (excluding Cement concrete 1:3:6 base concrete) BOX TYPE WATERPROOFING (Vertical)

Providing and laying damp proof course 50 mm thick in M20 cement concrete layer and bitumen / using cement with Waterproofing compound curing, formwork etc. complete. DPC COURSE

Providing and laying Cast in situ/Ready Mix cement concrete in M15 of trap/ granite/quartzite/gneiss metal for bed blocks, foundation blocks and such other items including bailing out water, Steel centering, formwork, laying/ pumping, compacting, roughening them if special finish is to be provided, finishing uneven and honeycombed surface and curing etc. complete. The Cement Mortar 1:3 plaster is considered for rendering uneven and honeycombed surface only. Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin etc. (Wooden centering will not be allowed.), with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Natural Sand / Crushed sand VSI Grade finely washed etc) PCC & RCC

Providing and Laying Plum Concrete consisting of 80% PCC mix (1:3:6) and 20% Rubble stone of maximum size of 150mm laid in layers with ramming consolidating, watering, including dewatering cost, seignoiorage & conveyance of all materials,, labour charges, machine mixing, finishing the surface etc. complete.

Providing and laying Cast in situ/Ready Mix cement concrete M-30 of trap / granite /quartzite/ gneiss metal for R.C.C. work in foundations like raft, strip foundations, grillage and footings of R.C.C. columns and steel stanchions etc. columns as per detailed designs and drawing or as directed including Steel centering formwork, cover blocks laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete. (Excluding reinforcement and structural steel). with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Natural Sand / Crushed sand VSI Grade finely washed etc)

Providing and laying Ready mix cement concrete M 30 of trap /granite /quartzite /gneiss metal, Natural Sand for R.C.C.columns as per detailed designs & drawing or as directed including centering, formwork, cover blocks, compaction, curing, finishing and roughening the surface if special finish is to be provided ( Excluding reinforcement & structural steel ) complete With Natural Sand ( Item to be used with prior permission of Superintending Engineer )

Providing and laying Cast in situ/Ready Mix cement concrete in M-20 of trap/ granite/ quartzite/ gneiss metal for R.C.C.coping to plinth or parapet and sill of doors and windows moulded as per detailed drawings or chamfered as approved by the Engineer including steel centering, formwork, cover blocks, laying/pumping, compacting , curing , finishing and roughening them if special finish is to be provided and curing complete. (Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Natural Sand / Crushed sand VSI Grade finely washed etc)

Providing and laying Cast in situ/Ready Mix cement concrete in M-25 of trap/ granite/ quartzite/ gneiss metal for R.C.C. beams and lintels as per detailed designs and drawings or as directed including steel centering, formwork, cover blocks, laying/pumping, compactionand roughening the surface if special finish is to be provided and curing etc. complete. (Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Natural Sand / Crushed sand VSI Grade finely washed etc)

Providing and laying Cast in situ/Ready Mix C.C. M-25 of trap metal for RCC rectangular grid beam with slab as per detailed design and drawing or as directed including dewatering if necessary, steel centering, formwork, cover blocks, laying/pumping, compacting, finishing the form surface with C.M. 1:3 of sufficient minimum thickness to give smooth and even surface or roughening them if special finish is to be provided and curing complete (Excluding reinforcement and structural steel). with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Natural Sand / Crushed sand VSI Grade finely washed etc)

Providing and laying Cast in situ/Ready Mix cement concrete in M-25 of trap /granite / gneiss/ quartzite metal for R.C.C. arches with skew backs as per detailed design and drawings or as directed including steel centering, plywood/steel formwork, steel props, laying/pumping, compaction, finishing uneven and honeycombed surface with C.M. 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening the surface if special finish is to be provided and curing etc. complete. (Excluding reinforcement, including cover block). Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin etc. (Wooden centering will not be allowed) With fine aggregate (Natural Sand / Crushed sand VSI Grade finely washed etc)

Providing and laying Cast in situ/Ready Mix cement concrete in M-25 of trap/ granite/ quartzite/ gneiss metal for R.C.C. pardi of required thickness including steel centering, formwork, cover blocks, laying/pumping, compacting and roughening them if special finish is to be provided and curing complete. (Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Natural Sand / Crushed sand VSI Grade finely washed etc)

Providing and laying Cast in situ/Ready Mixcement concrete M-25 of trap/ granite/ quartzite/ gneiss metal for R.C.C. chajja as per detailed design and drawings including steel centering, formwork, cover blocks, laying/pumping, compacting and roughening the surface if special finish is to be provided and curing complete. (Excluding reinforcement and structural steel). with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Natural Sand / Crushed sand VSI Grade finely washed etc)

Providing and fixing in position TMT - FE - 500 bar reinforcement of various diameters for R.C.C. pile caps, footings, foundations, slabs, beams columns, canopies, staircase, newels, chajjas, lintels pardis, copings, fins, arches etc. as per detailed designs, drawings and schedules. including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required complete. REINFORCEMENT STEEL

Providing second class Burnt Brick masonry with conventional/ I.S. type bricks in cement mortar 1:6 in superstructure including striking joints, raking out joints, watering and scaffolding etc. Complete (Peripheral Walls, toilets)

Providing and fixing during laying in RCC Slab rectangular 2 mm thick M.S. sheet fan hook box of size 180x100 mm with required depth with holes or notches as required, bottom and top sides of 1.6 mm M.S. sheet fixed with 3.5 mm dia. round headed screws together with 12 mm dia. M.S. bar bent to shape with hooked ends for fan hook and painting to exposed surface.

Providing Autoclaved Aerated Concrete Block masonry (150mm thick) of Ecolite or equivalent make conforming to IS:2185 (Part 3) - 1984 in extra fine jointing mortar of fixoblock of UltraTech or equivalent in superstructure including scaffolding, striking joints, raking out joints and curing of joints for one week etc. Complete. The test shall be carried out conforming to IS:6441 Part I - 1972. (Internal Partition Walls)

Providing internal cement plaster 20 mm thick in two coats in cement mortar 1:3 without neeru finish, to concrete, brick surface, in all positions including scaffolding and curing etc.complete. (Walls internal surfaces)

Providing and applying Two coats of wall care Putty to prepare surface even and smooth of approved make, etc complete. (internal plastered surfaces)

Providing sand faced plaster externally in cement mortar using approved screened sand, in all positions including base coat of 15 mm thick in cement mortar 1:4 using waterproofing compound at 1 kg per cement bag curing the same for not less than 2 days and keeping the surface of the base coat rough to receive the sand faced treatment 6 to 8 mm thick in cement mortar 1:4 finishing the surface by taking out grains and curing for fourteen days scaffolding etc.complete. (non cladded walls external surfaces)

Providing and fixing chicken mesh of 22 gauge, with about 30 cm. width at the junction of R.C.C members and brick work, of approved quality including fixing mesh in position by necessary drilling in concrete /B.B.masonry and or tying by binding wire etc. complete.

Providing and applying white-wash in two coats on old / new plastered or masonry surfaces and asbestos cement sheets including scaffolding and preparing the surface by brushing and brooming down etc. complete. (shafts / ducts, ceilings)

Providing and applying premium grade royale/velvet acrylic emulsion paint of approved quality, colour and shade to new surface in two coats including primer, putty, primer with perfect leveling, cleaning, scaffolding, preparing the surface. etc. complete. (internal non cladded wall surfaces)

Providing texture surface coating on walls of approved shade and texture. The rates are inclusive of scaffolding staging etc. for any height and for plain as well as for Architectural surface. All complete as directed and approved by the Engineer in Charge. (external non cladded wall surfaces)

Providing and laying polished hand cut Kotah Stone flooring 25mm to 30mm thick and 45cm to 55cm wide in plain/diamond pattern on a bed of 1:6 C.M. including cement float, filling joints with neat cement slurry, curing, polishing and cleaning complete.

Providing and laying in position granite stone flooring/ Skirting/ Dado of telephone black / Amba White / Cat bary brown / Ruby red / Ocean Brown (Gangsaw material) of approved quality / shade and size 18 mm to 20 mm thick on bed 1:6 cement mortar including cement floats striking joints, pointing in C.M. 1:3 curing and cleaning etc. complete. (offices, lobbies, storage, basement, service areas, toilets etc. all flooring)

Mirror Polishing on granite work / stone work to give high gloss finish including levelling the surface neat, cleaning etc. complete as directed by Engineer In Charge. (granite stone work)

Providing and fixing machine cut machine polished 18 mm to 20 mm thick telephone black / Amba White / Cat bary brown / RBI red / Ocean Brown granite stone (Gangsaw or equivalent) for treads and risers of steps and staircases of approved colour and shade with rounded moulding and three grooved line for the treads on bed of 1:4 Cement mortar including float filling joints with neat cement slurry curing polishing and cleaning etc. complete.

Providing and fixing Stone Cladding (dry) 30mm thick Black / galaxy granite stone or approved equivalent granite slab including all necessary SS 316 pins, sleeves, weather proof sealant DC 789 , surface sealer Dow Corning P-777 all accessories including required M.S. Supporting Structural Steel with (consumption of steel 30 Kg/Sq. mt.) including cutting, febricating , hoisting, erecting, fixing in position, including anchor bolts proper surface preparation, applying one coat of epoxy primer and over it two coats of epoxy painting of approved quality and shade complete. Note : Contractor has to do shop drawing which will be approved by Structural Engineer. (external surfaces of walls)

Providing and Cladding 300mm X 600mm Vitrified tiles on walls of toilets, wet areas, built in storage below window sill, of approved sample and uniform colour, in pattern as per the drawing on 15mm thk. cement paste on a backing coat of 15mm thk. CM 1:3 (1 cement :3 coarse sand), with 3 MM gap filled with spaces & epoxy grout with pigmented additives to match shade of the tile, cleaning, etc complete, as directed by the Engineer in charge upto his satisfaction.

Providing and constructing granite kitchen platform including stainless steel sink 600 mm x 450 mm size fixing as per detailed drawing including vertical both side polished kadappah stone 25 to 30 mm thick supports with kadappah top 35 to 40 mm thick and polished granite 16 to 20 mm top with side strips of granite at front and both sides of platform raised with two vertical granite supports 15 cm height and top granite of 75 x 40 cm including cutting, opening for sink of required size in kadappah as well as granite etc. complete. (Platform top size 5.00 m x 0.60 m and height is 0.75 m) Gangsaw Granite or equivalent.

ACCESS FLOORING - Providing & fixing anti-static flooring at electrical / server room with pedestal supports & etc. complete.

Providing and fixing machine cut mirror polished 18 mm to 20 mm thick telephone black / Amba White / Cat bary brown / RBI red / Ocean Brown granite stone with rounding / moulding the edges etc. with one side polish for door frames and window sills including preparing the surface and levelling in the desired line, jointing in approved adhesives, leveling, smooth cement plastering along the sides to match the existing surface in cement mortar, filling the joints with pigment mixed with cement, cleaning, finishing, curing etc complete as directed by Engineer In Charge. Gangsaw or Equivalent.

Rounding the edge in half round shape of the stone work specified below including high gloss machine polishing as directed by Engineer In Charge. a) Kota stone

Rounding the edge in half round shape of the stone work specified below including high gloss machine polishing as directed by Engineer In Charge. b) Any type of Granite stone

Champhering the edge of the stone work specified below including high gloss machine polishing as directed by Engineer In Charge. a) Kota stone

Champhering the edge of the stone work specified below including high gloss machine polishing as directed by Engineer In Charge. b) Any type of Granite stone

Providing waterproofing in toilets (450mm thick), kitchen & pantry (200mm thick) including brick bat coba in all position including providing and laying 12mm bedding in cement mortor 1:3 on vergin concrete slab with waterproofing compound @ 1kg/per bag of cement laying brick bat coba of required thickness in cm 1:5 with waterproofing compound 1 kg/bag of cement grouting and finishing the top layer with 20mm thick brick bedding in cm mortor 1:3 with waterproofing compound 1 kg/per bag of cement and testing the treated portion for 48 hours by pond test and covering ten years' guarantee on requisite stamp paper including curing etc. complete.

Providing cement based water proofing treatment to open terraces, Rooftop, OHWT, Staircases / LMR Roofs (Indian water proofing or alike) with brick bats laid in required slope to drain the water for any span after cleaning the base surface. Applying a coat of cement slurry admixed with approved water proofing compound and laying the brick bats on bottom layer in C.M.1:5 admixed with approved water proofing compound filling up to half depth of brick bats, curing this layer for 3 days, applying cement slurry over this layer joints of brick bats with C.M.1:3 admixed with approved water proofing compound and finally top finishing with average 20 mm. thick layers of same mortar added with jute fiber at 1 Kg per bag including finishing the surface smooth with cement slurry admixed with approved water proofing compound. Marking finished surface with false squares of 300mm x 300 mm. making the junctions at the parapet rounded and tapered top for required height, with drip mould at the junction of plaster and parapet and curing and covering 10 years Guarantee against leakproofness on Court fee stamp paper of Rs. 500/- including ponding test etc. complete.

Providing waterproof plaster in toilets 20 mm thick for dado in cement mortar 1:3 with neat finishing, floating using waterproofing compound at the rate of 1 kg. per bag of cement of approved make and manufacturer and curing (and filling joints of Nahani trap and any outlet by properly) etc. complete.

Providing and fixing solid core flush door shutter with vision glass panel in Single leaf (900mm x 2100mm) 32 mm thick with SS ball bearing butt hinges (102mm x 76mm x 3mm) - 4 Nos., SS Mortice Cylindrical lock with key Godrej 3792 - 1 Set, 250mm long SS Pull handle - 1 Pair, SS medium duty Door closer - 1 No, vision panel 300mm x 450mm etc. complete. as directed by the Engineer in charge (doors for non fire escape staircase, for cabins / rooms)

Providing and fixing solid core flush door shutters with vision glass panels in Double leaf (1200mm x 2100mm) 32 mm thick with SS ball bearing butt hinges (102mm x 76mm x 3mm) - 8 Nos., SS Mortice Latch Godrej 8288 - 1 Set with key, 250mm long SS Pull handle - 1 Pair, vision panels 300mm x 450mm etc. complete. as directed by the Engineer in charge (main doors for various departments, basement store)

Providing and fixing single leaf flush door shutters for toilet (750mm x 2100mm) 32 mm thick with SS ball bearing butt hinges (102mm x 76mm x 3mm) - 3 Nos., SS Mortice Cylindrical lock with key Godrej 3792 - 1 Set, Louvered Vent at bottom (450mm x 300 mm) as directed by the Engineer in charge.

Single Leaf Flush door shutters for service shaft, utility area, AC ledge 600mm x 2100mm with SS ball bearing butt hinges (102mm x 76mm x 3mm) - 3 Nos., Magnetic Lock to the Bottom, 200mm long SS Pull handle - 1 Pair etc. complete as directed by the Engineer in charge.

Design, fabrication and installation of frameless double leaf glass door (1500mm x 2400mm) consisting of 12mm clear toughened / laminated Glass (St. Gobian/ Modi make) and fixing with DORMA (PT series) make patch fittings such as (bottom patch , Top patch , Lock , Pivot , Handle and double action floor spring dorma make ) complete in all respect as directed by the Engineer in charge.

Fire Rated Single Leaf Door - Laminate Finish: Providing & Fixing of Wooden Fire Door (1200mm x 2100mm) without Panic Bar of approved make and of required size, 120 minutes fire rating, integrity and insulation in accordance with the criteria of BS 476 ; Part 22 : 1987 and report 212 (1)/FR/2003; Insulation on door leaf only. Tested at Fire Research Laboratory, Central Building Research Institute, Roorkee with standard heating conditions as specified in IS : 3809-1979 and BS : 476 part 20 & 22, 1987 to achieve the required integrity & insulation (i.e. to restrict the heat radiation, temperature rise on the non fire side to the maximum of 140 degree Centigrade above the ambient temperature on the unexposed surface of the shutter). Red Mirranti Hard wood frame of section 145mm x 70mm with Intumescent strip (Imported) to take care of Hot and cold smoke of size 10mm x 2mm x 2Nos. Concealed in the grove of the frame and 55mm thick single leaf shutter made out of perimeter railing of Red Mirranti wood of size 100mm x 29mm and promina 60.9mm thick Calcium Silicate Board Fire Retardant compound on each side coated with Intumescent sealant and faced with 4mm thick marine ply with Fire and smoke Intumescent Seal of size 20mm x 2mm x 1 No., mounted in the grooves in the shutter on all sides except bottom with 10mm thick Hardwood beading on all side. The Fire Doors with frame will be as per IS: 3614 part 2 and BS: 476 part 20 at FRL CBRI Roorkee with standard heating conditions as specified in IS: 3809 - 1979 and BS: 476 part 20 & 22 1987. The door shall be finished with 1 mm thick fire retardent laminate on both side etc.,with approved Stainless steel fittings & Fixtures all complete to the entire specification as per Architect's Instruction (Fire Escape Staircases)

Providing & Fixing Slidding window systems are manufactured from Rigid Thermo Vinyl Polymer (RTVP) Profiles suitable for tropical development.The profile are with multichambered construction.The nominal thickness of outer wall is 2 MM.The outer frame size is 105 x 52 mm.Roller shutter frame 60 x 27 mm & Handle shutter frame 52 x 30mm. Glass panels used in window system shall be of 6mm thick clear float glass manufactured by Modiguard/Saint Gobin/Asahi or any other approved equivalent. The window systems are prefabricated in fatory.All the corners of outer frame & shutter are fusion welded under pressure to a pre-determined temp.& time ,as per the specification & design.The structural reinforcement chambers are not exposed to any drainage routing.The steel reinforcements are 1.5mm thk.hot dip galvanised & passivated for corrosion resistance & tropical development.Slidding track is made of UPVC profile, which is the part of outer frame for smooth movement of shutter. Sliding roller assembly consist of Nylon Roller & Zinc Alloy casting body.Mosquito frame is part of the slidding outer frame.Gaskets are made of Ethylene Propylene Dienemer (EPDM).which has good wheathering properties & resistance,to tear & decay to OZONE & U.V.exposure.as per manufacturers specification as directed by Engineer in Charge etc. complete

White coloured fully glazed Aluminium powder coated side openable panel window (750mm x 1500mm size) with all accessories complete as directed by the engineer in charge (toilet, staircase, external wall)

Providing, fabricating and fixing full height aluminium storefront glazing with sections (IS 733 and IS 1825), 60 microns pure polyster coated, 25 microns anodised (IS 1868), of grade AC 25, fixed with rawl plugs and screws / fixing clips / expansion hold fasteners and filling gaps with PVC / Neoprene felt along with aluminium snap beadings, CP brass / stainless steel screws for glazing / panelling etc. complete as per the design intent and directions of the Engineer in Charge. (grond floor facade)

Providing and fixing in position powder coated adjustable aluminium louvered ventilators of 600mm x 900mm (having bird mesh and exhaust fan) as per detailed drawing and specifications including aluminium frames 80 x 38 mm x 1.22 mm box type, 5 mm thick sheet glass louvers, of approved quality etc. complete (toilets)

Providing and fixing in position powder coated aluminium louvers of various sizes as per detailed drawing and specifications including aluminium frames 80 x 38 mm x 1.22 mm box type, 5 mm thick sheet glass louvers, of approved quality etc. complete (external wall of toilet shaft / AC Ledge areas)

Providing and fixing MS Rolling Shutter (With mechanical gear) fabricated from steel laths of minimum thickness 0.9 mm with lock plate of 3.15 mm thickness reinforced with 35 x 35 x 5 mm angle section fitted with sliding bolts and handles for both sides, deep M.S. channel section of depth and thickness not less than 65 mm and 3.15 mm respectively with hold fast arrangements, M.S. Bracket plate 300 x 300 x 3.15 mm minimum size and shape with square bar, suspension shaft of minimum 32 mm diameter, hood cover of M.S. sheet not less than 0.9 mm thickness and of any size at top and safety devices including mechanical gear operation arrangement consisting of worm gear wheels and worms of high grade cast iron or mild steel and one coat of red lead primer etc. complete. (I.S. 62481979)

Providing and fabricating structural steel work in rolled sections like joists, channels, angles, tees etc. as per detailed design and drawings or as directed including cutting, fabricating, hoisting, erecting, fixing in position making riveted / bolted /welded connections without connecting plates, braces etc. and including one coat of anticorrosive paint and over it two coats of oil painting of approved quality and shade etc. complete.(JINDAL,TATA OR EQUIVALENT)

Supplying & fixing 50mm dia hollow pipe stainless steel hand rail of grade 304 with glossy finish at all levels including bending to required profile, welding, grinding, buffing, polishing & alll required accessories & labour etc complete (mounted on staircase paradi, terrace parapet)

Making holes in 110 mm to 150 mm brick/concrete/rubble walls for drainage pipes, fittings, etc. and making good the same in cement mortar 1:3 or cement concrete 1:2:4 & finishing on both sides with cement plaster and 3 coats of white or colour wash as directed by Engineer in charge etc. complete.

Providing and fixing 600 x 450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers etc. complete.

Supply and Installation of machine room less elevators of OTIS or other equivalent approved make with scaffolding, monor builders works, and all steel materials such as machine beams, bearing plates, buffer support ladder, sill angles, fascias etc. complete. Machine room elevator with automatic door closing facility. For 13 passanger capacity.

Providing, detailing, and fabricating as per specifications, transporting to site and erecting MS Openable / Sliding / Ornamental Entrance Gates including track and wheel, locking arrangement, fixing bolts, nuts, washers, cleats, stiffeners, gussets decorative balusters, arrow heads etc. and all necessary operations like straightening, bending, cutting, drilling, grinding, machining if specified, welding etc. complete weighing 25 to 30 kg/Sqm, including cleaning, Grinding and removing the welding burr and preparing surface and applying one coat of red oxide zinc chromate primer and one coat of Synthetic Enamel paint after fabrication and second coat of Synthetic Enamel paint after erection, with approved colour, shade and brand etc. including touching up with primer etc. complete as directed by Engineer In Charge.

Providing & fixing European type white glazed earthenware water closet, floor mounted closet to be used with cistern Wash Basin 46 x 36 with one pair mounting bracket, EWC & Cistern complete with fittings & seat cover, one number hand rail 76 cm & five nos. of grab rails 60cm & one no. faucet for WB including 'P' or 'S' trap with white bakelite including C.I. soil & vent pipes upto the outside face of the wall and 100 mm dia. C.I. Plug bend, and flush bend and inlet pipe with brackets for fixing the cistern 40 mm dia. G.I. overflow pipe, painting of the exposed pipes and cutting and making good and floors. as directed by architect & Engineer-In-Charge etc.complete (Handicapped Toilet)

Providing and laying Cast in situ/Ready Mix cement concrete in M-20 of trap / granite /gneiss / quartzite metal for R.C.C. fins of required thickness in position as shown on the drawings or as directed by Engineer-in-charge including steel centering, plywood / steel formwork, steel props, laying/pumping, compaction, finishing uneven and honeycombed surface with C.M. 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening the surface if special finish is to be provided and curing etc. complete. (Excluding reinforcement, including cover block) Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin etc. with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Natural Sand / Crushed sand VSI Grade finely washed etc) (as per façade)

Plywood Work-Providing and fixing 12mm thick Plywood of approved make, with shapes and sizes as per drawings, including required backing, supports, all screws and fastening and finishing complete.

Providing and fixing at all height false ceiling of 12.5 mm thick tapered edge Gypsum Board conforming to IS: 2095 including providing and fixing of frame work made of special sections power pressed from M.S. sheet and galvanized in accordance with zinc coating 600 as per IS: 277 and consisting of angle cleats of size 25 mm wide X 15 mm thick with flanges of 22 mm and 37 mm at 1200 mm centre to centre one flange fixed to the ceiling with dash fastner 12.5 mm dia X 40 mm long with 6 mm dia. Bolts to the angle hangers of 25 X 25 X 5 mm of required length, and other end of angle hanger being fixed with nuts and bolts to 6.1 channels 45 mm X 15 mm X 0.9 mm running at the rate of 1200 mm centre to centre to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having clips of 10.5 mm at 450 mm centre to centre shall be fixed in a direction perpendicular to 6.1 channel with connecting clips made out of 2.64 mm dia. X 230 mm long 6.1 mm wire at every junction including fixing the gypsum board with ceiling section and perimeter channels

Providing and fixing 15mm thick Bison Board of approved make, with shapes and sizes as per drawings, including scaffolding, supporting, all screws and fastening and finishing complete.

Signage & Logo - Providing and fixing external signages and logo of approved quality, make and operating system as directed by the Engineer in charge.

Material Testing - Cement Standard Consistancy, Fineness,Specific Gravity, Setting Time (Initial & Final), Compressive Strength, Soundness

Material Testing - Sand (i) Fineness Modulus (Sieve Analysis), Stilt & Clay Content

Material Testing - Sand (ii) Chloride and Sulphate Content

Material Testing - Sand (iii ) Silt Factor

Material Testing -Metal I & II (i) Water absorption, Specific Gravity, Impact Value/Crushing Value

Material Testing -Metal I & II (ii) Sieve Analysis

Material Testing -Metal I & II (iii) Abrasion Value

Material Testing -Metal I & II (iv) Flakiness Index & Elongation Index

Material Testing -Metal I & II (v) Stripping Value (for Bituminous work)

Material Testing -Metal I & II (vi) Soundness

Water Bound Macadam (i) Grading, Water absorption, Specific Gravity, Impact Value/Crushing Value

Water Bound Macadam (ii) Sieve Analysis

Water Bound Macadam (iii) Abrasion Value

Water Bound Macadam (iv) Flakiness Index & Elongation Index

Material Testing -Wedge Shear Elelment Layer (Stone/Rubble) Crushing Value/Compressive, Water absorption & Specific Gravity

Material Testing -Water PH Value, Sulphate & Chloride Content

Material Testing -Concrete (i) Concrete Mix Design (with all tests on basic materials)

Material Testing -Concrete (ii) Compressive Strength of C.C. Cube (Set of 3 cubes) for all grades of concrete

Material Testing -Concrete (iii) Permeability Test

Material Testing -Concrete (iv) Taking of Core samples in concrete pavement (Excluding Dead Journy Charges)

Material Testing -G.I. Pipes Weight per running meter, Diameter of pipe & wall thickness of pipe

Material Testing -G.I. Pipes Weight of Zinc coating per sq.m.

Material Testing -Soil/ Murum Sieve analysis

Material Testing -Soil/ Murum Plastic Limit & Liquid Limit

Material Testing -Soil/ Murum Compaction Test (proctor Density)

Material Testing -Soil/ Murum CBR Test (Lab) with compaction test

Material Testing -Soil/ Murum Field Density by sand replacement method

Material Testing -Soil/ Murum Free swell test for soil

Material Testing -Steel Bar Testing (tensile strength, %, Elongation, Yield Stress, Weight-Per Meter, Bend/Rebend Test, Proof Stress.) 8mm to 16 mm (Set of 3 Bars each dia)

Material Testing -Steel Bar Testing 16mm & above dia (Set of 3 Bars each dia)

Material Testing -Thermoplastic Paint (i) Glass bead contents & grading analysis

Material Testing -Thermoplastic Paint (ii) Reflectance & yellowness index

Material Testing -Thermoplastic Paint (iii) Flowability (Percentage Residue)

Material Testing -Thermoplastic Paint (iv) Softening Point (Ring & Ball Method)

Material Testing -Thermoplastic Paint (v) Drying Time

Providing and fixing stainless steel sink of size 600 x 510 x 200 mm incluidng coupling, outlet pipe, elbow and other necessary fitting, finishing etc. complete. (At Pantry)

Providing and fixing C.P. Angular stop clock with wall flange of approved make continental including necessary sockets/union nut etc. complete. (Pantry Area For water cooler)

Providing and fixing C.P. pillar cock long neck with aerator of approved make including necessary sockets/union nut etc. complete.

Providing and fixing C.P. BIB cock with wall flange of approved make including necessary sockets/ union nut etc. complete.

providing and fixing oval type under counter wash hand basin of 16 inch x 22 inch size and of special colour shade having telephonic black / coloured granite of 180 mm thick stone black kadappa framework including chromium plated coupling bottle - Trap using CERA company or equivalent oval typa wash basin model no 3448 as per detailed drawing or as directed by engg incharge etc complete. (Counter size 1.20 m x 0.60 m )

Providing and fixing sink cock with regular swinging spout (Wall Mounted Model) with wall flange with approved make incluidng other necessary fitting, etc. complete as directed by Engineer in charge.

Providing and fixing sink cock with regular swinging spout (Wall Mounted Model) with wall flange with approved make incluidng other necessary fitting, etc complete as directed by Engineer in charge. (At pantry)

Providing and fixing C.P. BIB cock with wall flange of approved make including necessary sockets/ union nut etc. complete as directed by Engineer in charge. ( At Janitor room)

Providing and fixing Hand shower (health faucet) with 8mm dia. 1m long flexible tube having wall hook with approved make including necessary sockets/ union nut etc. complete as directed by Engineer in charge. (At Toilet)

Providing and fixing white european type wall-hung, of size 360mm x 360mm x 575mm with flush valve of approved make including soil pipe, vent pipe upto outside face of wall, 100mm dia C.I. plug bend inlet pipe all fittings,cutting & making good walls, floors etc as directed by Engineer in charge.

Providing and fixing white glazed urinal of series with Pressmatic auto closing valve of having 32mm diameter P.V.C. flush pipe with fitting and flushing of approved make and arrangement including lead soil pipe, lead trap & soil pipe connection upto the outside face of wall etc.complete as directed by Engineer in charge.

Providing and fixing wall hung white wash basin of size 350x450x165mm with approved make pillar cock, C.P. Angular stop cock long thread approved make continental including SS bottle trap of approved make having necessary pipe connection up to the outside face of the wall etc complete as directed by Engineer in charge.

Providing and fixing Oval Type Under Counter Wash Hand Basin of 420 x 590 x 195mm size with pillar cock, C.P.Angular stop cock, long thread of approved make continental including SS bottle trap of necessary pipe connection up to the outside face of the wall, having Telephonic Black / Colour Granite of 180 mm thick fixed on Black Kadappa Framework, etc. Complete as directed by Engineer in charge.

Providing and fixing white Opal series European type wall-hung, of size 400mmx370mmx575mm with approved make flush valve including soil pipe, vent pipe upto outside face of wall, 100mm dia C.I. plug bend inlet pipe all fittings, cutting & making good walls, floors etc as directed by Engineer in charge.

Providing and fixing C.P. a 2-Way BIB cock with wall flange of approved make including necessary sockets/ union nut etc. complete as directed by Engineer in charge.

Providing and fixing white european type wall-hung pan, of size 350mm x 355mm x 570 mm concealed flush tank with floor- mounting frame installing kit and drain pipe connection set for wall hung WC, with approved make square control plates including soil pipe, vent pipe upto the outside face of wall, 100mm dia C.I. plug bend inlet pipe all fittings,cutting & making good walls, floors etc. complete.

Providing and fixing white glazed urinal of size 710x460x300mm with sensotronic concealed type flushing valve for urinal with complete kit having fittings, inlet pipe with stop tap, brackets for fixing the cistern, 32mm diameter P.V.C. flush pipe with fitting and flushing arrangement including lead soil pipe, lead trap & soil pipe connection upto the outside face of wall etc complete.

Providing and fixing wall-hung white wash basin of size 470x575x190mm of approved make half pedestal, pillar cock, C.P.Angular stop cock, long thread continental including S.S. bottle trap of having necessary pipe connections up to the outside face of the wall.etc complete.

C.P.Toilet paper holder jaquar make continental.

C.P.Soap dish hooker jaquar make continental

C.P.Towel ring square jaquar make continental

Providing and fixing machine cut mirror polished 18 mm to 20 mm thick telephone black granite / Amba White / Cat bary brown / RBI red / Ocean Brown granite stone partition with rounding / moulding the edges etc. complete . Both side polish (Urinal Partition Wall)

Providing and fixing 75 mm dia stabiliser pipe/ P.V.C. soil vent/waste pipe and with necessary fixtures and fitting such as bends, tees, single junctions, slotted vent, clamps etc. complete

Providing and fixing 100 mm dia stabiliser pipe/ P.V.C. soil vent/waste pipe and with necessary fixtures and fitting such as bends, tees, single junctions, slotted vent, clamps etc. complete.

Providing, laying and fixing P.V.C. pipe of 40mm dia. with fittings such as bends, tees, reducers, clamps, etc. including necessary excavation, trench filling etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete.

Providing, laying and fixing P.V.C. pipe of 50mm dia. with fittings such as bends, tees, reducers, clamps, etc. including necessary excavation, trench filling etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete.

Providing, fixing and testing uPVC deep water seal (water seal should not be less than 50mm) Multi Floor Trap, including Architect approved CP brass medium duty SS grating of rectangular (150 * 150 mm) or circular (150 mm dia) type, pipe extention piece, cost of cutting and making good the walls and floors wherever required. (In Toilets & Kitchen) (a) 110 x 80 x 50mm with 3 inlet of 50 mm and outlet of 80mm

Providing and fixing 10 cm PVC nahani trap with grating etc. complete.

Providing and fixing 8 cm rigid PVC Nahani trap including PVC grating, bend, connecting piece of UPVC pipe up to the outside face of wall, making the good damaged surface and testing etc. complete ( Prior approval of sample and brand by Ex. Engr. is necessary before use)

Providing and fixing 15 cm rigid PVC Nahani trap including PVC grating, bend, connectingpiece of UPVC pipe up to the outside face of wall, making the good damaged surface and testing etc. complete ( Prior approval of sample and brand by Ex. Engr. is necessary before use)

Providing and fixing PVC floor clean out plug complete rate to include making of opening in floor, marble / tiles, for fixing Cleanout. (In toilet) (a) 75 mm dia

Providing and fixing PVC floor clean out plug complete rate to include making of opening in floor, marble / tiles, for fixing Cleanout. (In toilet) (b) 110 mm dia

Providing and fixing PVC floor clean out plug complete rate to include making of opening in floor, marble / tiles, for fixing Cleanout. (In toilet) (c) 150 mm dia

Providing and fixing in position UPVC ultra violet stabilized 110 mm outer diameter cowl dome confirming to I.S.-4985 including making joints with solvent cement etc. complete

Providing and fixing in position UPVC ultra violet stabilized 75 mm outer diameter cowl dome confirming to I.S.-4985 including making joints with solvent cement etc. complete

Providing and fixing P.V.C. Rain water pipes of 160mm outer diameter and having wall thickness of 2.2 to 2.7 mm confirming to I.S. 13592- 1992 including proper rainwater receiving recess with P.V.C. plug, bend, necessary fittings, such as, offsets, shoes, inluding fixing the pipe on wall using approved wooden cleats projecting 25mm to 40mm from face of wall a fixing with clips of approved quality and number ,filing the joint using rubber gasket with solvent cement and properly resting the shoe of pipes on C.C. or masonry blocks, including necessary scaffolding and maintenance for 3 yrs for any leakages or dislocations of pipes. All the P.V.C. fittings and additional 2 piece socket clips shall be got approved from engineer in charge etc. complete.

Providing and fixing P.V.C. Rain water pipes of 110mm outer diameter and having wall thickness of 2.2 to 2.7 mm confirming to I.S. 13592- 1992 including proper rainwater receiving recess with P.V.C. plug, bend, necessary fittings, such as, offsets, shoes, inluding fixing the pipe on wall using approved wooden cleats projecting 25mm to 40mm from face of wall a fixing with clips of approved quality and number ,filing the joint using rubber gasket with solvent cement and properly resting the shoe of pipes on C.C. or masonry blocks, including necessary scaffolding and maintenance for 3 yrs for any leakages or dislocations of pipes. All the P.V.C. fittings and additional 2 piece socket clips shall be got approved from engineer in charge etc. complete.

Providing and fixing CI rain water scupper drains with approved make in parapet / shaft wall including necessary accessories with following specifications/standard detail as required (In Terrace) (a) CI grating 100mm dia for 80 dia pipe

Providing and fixing CI rain water scupper drains with approved make in parapet / shaft wall including necessary accessories with following specifications/standard detail as required (In Terrace) (b) CI grating 150mm dia for 100 dia pipe

Providing and fixing CI rain water scupper drains with approved make in parapet / shaft wall including necessary accessories with following specifications/standard detail as required (In Terrace) (c) CI grating 200mm dia for 150 dia pipe

Providing, laying, jointing and testing in position the following heavy class GI pipes for under ground piping conforming to IS:1239 including all necessary fittings forsed soacet weld/threaded of 300psi (Test pressure) conforming to IS 1239 ((Part -2)-2011) such as elbow, coupler & tee etc. Cost shall be inclusive of excavation, dewatering, backfilling, ramming surrounding the pipe all round with minimum 150 mm thick all round compacted silver sand and providing thrust block. (Pipe shall be provided with anti crossive protective treatment confirming to AWWA C 203 / IS 10221 standard complete as per specification). All work complete as per specification and satisfaction of the Enginner in Charge. (Rising Main UGR To Building Edge). (a) 32 mm dia.

Providing, laying, jointing and testing in position the following heavy class GI pipes for under ground piping conforming to IS:1239 including all necessary fittings forsed soacet weld/threaded of 300psi (Test pressure) conforming to IS 1239 ((Part -2)-2011) such as elbow, coupler & tee etc. Cost shall be inclusive of excavation, dewatering, backfilling, ramming surrounding the pipe all round with minimum 150 mm thick all round compacted silver sand and providing thrust block. (Pipe shall be provided with anti crossive protective treatment confirming to AWWA C 203 / IS 10221 standard complete as per specification). All work complete as per specification and satisfaction of the Enginner in Charge. (Rising Main UGR To Building Edge). (b) 40 mm dia

Providing, laying, jointing and testing in position the following heavy class GI pipes for under ground piping conforming to IS:1239 including all necessary fittings forsed soacet weld/threaded of 300psi (Test pressure) conforming to IS 1239 ((Part -2)-2011) such as elbow, coupler & tee etc. Cost shall be inclusive of excavation, dewatering, backfilling, ramming surrounding the pipe all round with minimum 150 mm thick all round compacted silver sand and providing thrust block. (Pipe shall be provided with anti crossive protective treatment confirming to AWWA C 203 / IS 10221 standard complete as per specification). All work complete as per specification and satisfaction of the Enginner in Charge. (Rising Main UGR To Building Edge). (c) 50 mm dia

Providing, laying, jointing and testing in position the following heavy class GI pipes for under ground piping conforming to IS:1239 including all necessary fittings forsed soacet weld/threaded of 300psi (Test pressure) conforming to IS 1239 ((Part -2)-2011) such as elbow, coupler & tee etc. Cost shall be inclusive of excavation, dewatering, backfilling, ramming surrounding the pipe all round with minimum 150 mm thick all round compacted silver sand and providing thrust block. (Pipe shall be provided with anti crossive protective treatment confirming to AWWA C 203 / IS 10221 standard complete as per specification). All work complete as per specification and satisfaction of the Enginner in Charge. (Rising Main UGR To Building Edge). (d) 65 mm dia

Providing and fixing on walls/ ceiling/ floors, 25 mm dia. heavy grade having embossed as ISI Mark galvanised iron pipes weight of 3.01 Kg/meter with necessary fittings . remaking good the demolished portion and applying primer of anti-corrosive oil paint 2 coats Including necessary scaffolding and removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete.

Providing and fixing on walls/ ceiling/ floors, 32 mm dia. heavy grade having embossed as ISI Mark galvanised iron pipes weight of 3.89 Kg/meter with necessary fittings . remaking good the demolished portion and applying primer of anti-corrosive oil paint 2 coats Including necessary scaffolding and removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete.

Providing and fixing on walls/ ceiling/ floors, 40 mm dia. heavy grade having embossed as ISI Mark galvanised iron pipes weight of 4.49 Kg/meter with necessary fittings and remaking good the demolished portion and applying primer of anti-corrosive oil paint 2 coats Including necessary scaffolding and removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete.

Providing and fixing on walls/ ceiling/ floors, 50 mm dia heavy grade having embossed as ISI Mark galvanised iron pipes weight of 6.33 Kg/meter with necessary fittings.and remaking good the demolished portion and primer of anti corrossive oil paint 2 coats Including necessary scaffolding and removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete.

Providing and fixing on walls/ ceiling/ floors, 80 mm dia.heavy grade having embossed as ISI Mark galvanised iron pipes weight of 10.15 Kg/meter with necessary fittings. and remaking good the demolished portion and applying primer of anti-corrosive oil paint 2 coats Including necessary scaffolding and removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete.

Providing and fixing on walls/ ceiling/ floors, 100 mm dia.heavy grade having embossed as ISI Mark galvanised iron pipes weight of 14.74 Kg/meter with necessary fittings. and remaking good the demolished portion and applying primer of anti-corrosive oil paint 2 coats Including necessary scaffolding and removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete.

Providing and fixing 25mm diameter water meter with non-return valve including strainer, sockets/ union nut and including water meter box making locking arrangement and lock. [Without chamber].

Providing and fixing 40mm diameter water meter with non-return valve including strainer, sockets/ union nut and including water meter box making locking arrangements and lock. [Withoutchamber].

Providing and fixing 50mm diameter water meter with non-return valve including strainer, sockets/ union nut and including water meter box making locking arrangement and lock. [without chamber]

Providing and fixing on walls/ ceiling/ floor 15 mm dia. CPVC pipe with necessary fittings, remaking good the demolished portion etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete.

Providing and fixing on walls/ceiling/floor 20 mm dia. CPVC pipe with necessary fittings, remaking good the demolished portion etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete.

Providing and fixing on walls/ ceiling/ floor 25 mm dia. CPVC pipe with necessary fittings, remaking good the demolished portion etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete.

Providing and fixing on walls/ ceiling/ floor 32 mm dia. CPVC pipe with necessary fittings, remaking good the demolished portion etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete.

Providing and fixing on walls /ceiling/ floor 40 mm dia. CPVC pipe with necessary fittings, remaking good the demolished portion etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete.

Providing and fixing on walls/ ceiling/ floor 50 mm dia. CPVC pipe with necessary fittings, remaking good the demolished portion etc. complete.

Providing and laying in trenches 15 mm dai. CPVC pipe including necessary excavation, fittings. Refilling trenches etc. complete Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete.

Providing and laying in trenches 20 mm dai. CPVC pipe including necessary excavation, fittings. Refilling trenches etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete.

Providing and laying in trenches 25 mm dai. CPVC pipe including necessary excavation, fittings. Refilling trenches etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete.

Providing and laying in trenches 32 mm dai. CPVC pipe including necessary excavation, fittings. Refilling trenches etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete.

Providing and laying in trenches 40mm dai. CPVC pipe including necessary excavation, fittings. Refilling trenches etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete.

Providing and laying in trenches 50mm dai. CPVC pipe including necessary excavation, fittings. Refilling trenches etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete.

Providing and fixing Ball valves conforming to IS 9890: 1981 with body material of cast iron as per IS 210 with renewable PTFE or Teflon seat & gland packing, Chrome-plated brass ball, the gap to be suitably sealed between the ball and the Teflon packing, with Iron handle provided with PVC jacket & indicated with the direction of ‘open’ and ‘closed’ situations & with internal screw threads of approved make all complete as per direction of Engineer in Charge. (In Toilet Isolation+shaft) Pressure rating -PN10 a) 15mm nominal bore

Providing and fixing Ball valves conforming to IS 9890: 1981 with body material of cast iron as per IS 210 with renewable PTFE or Teflon seat & gland packing, Chrome-plated brass ball, the gap to be suitably sealed between the ball and the Teflon packing, with Iron handle provided with PVC jacket & indicated with the direction of ‘open’ and ‘closed’ situations & with internal screw threads of approved make all complete as per direction of Engineer in Charge. (In Toilet Isolation+shaft) Pressure rating -PN10 b) 20mm nominal bore

Providing and fixing Ball valves conforming to IS 9890: 1981 with body material of cast iron as per IS 210 with renewable PTFE or Teflon seat & gland packing, Chrome-plated brass ball, the gap to be suitably sealed between the ball and the Teflon packing, with Iron handle provided with PVC jacket & indicated with the direction of ‘open’ and ‘closed’ situations & with internal screw threads of approved make all complete as per direction of Engineer in Charge. (In Toilet Isolation+shaft) Pressure rating -PN10 c) 25mm nominal bore

Providing and fixing Ball valves conforming to IS 9890: 1981 with body material of cast iron as per IS 210 with renewable PTFE or Teflon seat & gland packing, Chrome-plated brass ball, the gap to be suitably sealed between the ball and the Teflon packing, with Iron handle provided with PVC jacket & indicated with the direction of ‘open’ and ‘closed’ situations & with internal screw threads of approved make all complete as per direction of Engineer in Charge. (In Toilet Isolation+shaft) Pressure rating -PN10 d) 32mm nominal bore

Providing and fixing Ball valves conforming to IS 9890: 1981 with body material of cast iron as per IS 210 with renewable PTFE or Teflon seat & gland packing, Chrome-plated brass ball, the gap to be suitably sealed between the ball and the Teflon packing, with Iron handle provided with PVC jacket & indicated with the direction of ‘open’ and ‘closed’ situations & with internal screw threads of approved make all complete as per direction of Engineer in Charge. (In Toilet Isolation+shaft) Pressure rating -PN10 e) 40mm nominal bore

Providing and fixing Ball valves conforming to IS 9890: 1981 with body material of cast iron as per IS 210 with renewable PTFE or Teflon seat & gland packing, Chrome-plated brass ball, the gap to be suitably sealed between the ball and the Teflon packing, with Iron handle provided with PVC jacket & indicated with the direction of ‘open’ and ‘closed’ situations & with internal screw threads of approved make all complete as per direction of Engineer in Charge. (In Toilet Isolation+shaft) Pressure rating -PN10 f) 50mm nominal bore

Providing and fixing Butterfly valve conforming to IS 13095: 1991 with Body material of Cast Iron as per IS 210:1978 (Reaffirmed 2004) of Grade FG 220, DI disc coated with anticorrosive epoxy or nickel coating, Carbon Steel shaft, integrally moulded with high grade elastomer like Nitrile rubber/ Neoprene/ EPDM with flanges with necessary nuts, bolts, gaskets, operated with 8 position lever and of approved make, with all bye works complete as per direction of Engineer in Charge. . (In Toilet Isolation+ shaft) Pressure rating -PN16 (a) 65mm nominal bore

Providing and fixing Butterfly valve conforming to IS 13095: 1991 with Body material of Cast Iron as per IS 210:1978 (Reaffirmed 2004) of Grade FG 220, DI disc coated with anticorrosive epoxy or nickel coating, Carbon Steel shaft, integrally moulded with high grade elastomer like Nitrile rubber/ Neoprene/ EPDM with flanges with necessary nuts, bolts, gaskets, operated with 8 position lever and of approved make, with all bye works complete as per direction of Engineer in Charge. . (In Toilet Isolation+ shaft) Pressure rating -PN16 (b) 80mm nominal bore

Providing and fixing Butterfly valve conforming to IS 13095: 1991 with Body material of Cast Iron as per IS 210:1978 (Reaffirmed 2004) of Grade FG 220, DI disc coated with anticorrosive epoxy or nickel coating, Carbon Steel shaft, integrally moulded with high grade elastomer like Nitrile rubber/ Neoprene/ EPDM with flanges with necessary nuts, bolts, gaskets, operated with 8 position lever and of approved make, with all bye works complete as per direction of Engineer in Charge. . (In Toilet Isolation+ shaft) Pressure rating -PN16 (c) 100mm nominal bore

Supplying and fixing Motorised Butterfly Valve (on/off type) with actuator and other required accessories including the Electrical control cabling between the valve and the control panel / pump panel as required in conjunction with the layout plans. (a) 200mm nominal bore

Providing & fixing Brass air release valve with silicone rubber seal, high temperature resistant polyethylene, having maximum working pressure of 10 bar in the pipeline includes isolating valve with all necessary accessories all complete as per direction of the Engineer in charge. (At Terrace on ring main) (a) 25mm nominal bore

Providing and fixing 40 mm. dia Ball cock medium type with PVC float including sockets and necessary fittings and tested as per municipal requirements etc. complete.

Providing and fixing 32 mm. dia Ball cock medium type with PVC float including sockets and necessary fittings and tested as per municipal requirement etc. complete.

Providing and fixing 25 mm. dia Ball cock medium type with PVC float including sockets and necessary fittings and tested as per municipal requirement etc. complete.

Providing and fixing 20 mm. dia Ball cock medium type with PVC float including sockets and necessary fittings and tested as per municipal requirement etc. complete.

Providing and fixing 15 mm. dia Ball cock medium type with PVC float including sockets and necessary fittings and tested as per municipal requirement etc. complete.

Providing, fixing, testing and commissioning 600 mm long Hot Dipped galvanized iron puddle flanges fabricated out of 8 mm thick M.S. plates of suitable size properly fixed in walls & top slab of tanks of following diameters (Note:- quantity may vary according to final OHT) (a) 40 mm dia.

Providing, fixing, testing and commissioning 600 mm long Hot Dipped galvanized iron puddle flanges fabricated out of 8 mm thick M.S. plates of suitable size properly fixed in walls & top slab of tanks of following diameters (Note:- quantity may vary according to final OHT) (b) 50 mm dia.

Providing, fixing, testing and commissioning 600 mm long Hot Dipped galvanized iron puddle flanges fabricated out of 8 mm thick M.S. plates of suitable size properly fixed in walls & top slab of tanks of following diameters (Note:- quantity may vary according to final OHT) (c) 65 mm dia.

Providing, fixing, testing and commissioning 600 mm long Hot Dipped galvanized iron puddle flanges fabricated out of 8 mm thick M.S. plates of suitable size properly fixed in walls & top slab of tanks of following diameters (Note:- quantity may vary according to final OHT) (d) 80 mm dia.

Providing, fixing, testing and commissioning 600 mm long Hot Dipped galvanized iron puddle flanges fabricated out of 8 mm thick M.S. plates of suitable size properly fixed in walls & top slab of tanks of following diameters (Note:- quantity may vary according to final OHT) (e) 100 mm dia.

Providing, fixing, testing and commissioning 600 mm long Hot Dipped galvanized iron puddle flanges fabricated out of 8 mm thick M.S. plates of suitable size properly fixed in walls & top slab of tanks of following diameters (Note:- quantity may vary according to final OHT) (f) 150 mm dia.

Providing, fixing, testing and commissioning 600 mm long Hot Dipped galvanized iron puddle flanges fabricated out of 8 mm thick M.S. plates of suitable size properly fixed in walls & top slab of tanks of following diameters (Note:- quantity may vary according to final OHT) (g) 200 mm dia

Providing, fixing, testing and commissioning 600 mm long Hot Dipped galvanized iron puddle flanges fabricated out of 8 mm thick M.S. plates of suitable size properly fixed in walls & top slab of tanks of following diameters (Note:- quantity may vary according to final OHT) (h) 250 mm dia

Providing and fixing 50 mm dia tanks vent connection with stainless steel mosquito proof wire mesh of approved quality sandwiched between flanges with necessary welding and bolts, washers and gasket etc. as per the approval of the engineer.

Providing and fixing Brass mosquito proof netting 85g conforming to IS 1568 : 1970 over galvanised steel overflow and vent pipes to the water tank at roof top.

Providing, fixing, testing and commissioning 600 mm dia cast iron (medium duty) water tank cover with 40 mm C.I. seat and lockable arrangement complete in all respects (Total weight of cover & frame to be not less than 21 Kgs.).

Providing and fixing Ductile iron Man Hole Covers/ Strom Water Grating and Grating with frame of Various sizes, weight and types and load bearing capacity as per EN-124, equivalent NECO with prior approval of concerned Superitending Engineer.

Supplying, installing, testing and commissioning water level guage of tubular glass conforming to IS 5428: Part 1: 1985 of approved make, to sense various levels of the sump and overhead tank, with necessary accessories etc all complete as per the direction of Engineer in charge. The gauges shall be BMS compatible. (a) 16mm diamater & Length 5000 mm

Providing and fixing level transmitter (High-medium-low) with all necessary accessories. Probe range-7m

Providing and fixing level sensor (to calibrate volume of water in tank) with all necessary accessories. Probe range-7m

supply, installation testing PVC drain valves of following dia. with necessary pipe spool, fittings etc. 80 dia

Providing, fixing, testing and commissioning dual flanged C.I. `Y' Strainer with stainless steel fine wire mesh perforated sheet basket with necessary flange/ unions nuts, bolts and washers complete as required. (a) 50 mm dia.

Providing, fixing, testing and commissioning dual flanged C.I. `Y' Strainer with stainless steel fine wire mesh perforated sheet basket with necessary flange/ unions nuts, bolts and washers complete as required. (b) 65 mm dia.

Providing, fixing, testing and commissioning dual flanged C.I. `Y' Strainer with stainless steel fine wire mesh perforated sheet basket with necessary flange/ unions nuts, bolts and washers complete as required. (c) 80 mm dia.

Supply, installation in position, testing and commissioning of electrically driven Factory-assembled and tested, in-line, close-coupled, water feeding pumps of approved make, capable of discharging as indicated below including flexible connectors, check valves, shutoff valves, necessary accessories and electrical works etc. all complete as directed by Engineer in charge. (a) Pump Casing: Cast iron, with wear rings and threaded companion-flange connections. The suction and discharge flanges to be of dimensions in accordance to relevant IS/ISO standards. The pump case shall have both priming and drain hole closed by plugs. (b) Impeller: Stainless steel 304. It is to be statically and dynamically balanced, closed, and keyed to shaft. (c) Shaft and Shaft Sleeve: Stainless steel 304 shaft, with SS shaft sleeve. (d) Seal: Mechanical seal with silicon carbide rotating ring, stainless-steel spring, ceramic seat and rubber bellows and gasket. (e) The bearings are to be ball or roller type protected against ingress of water, dirt and other matter. (f) Shaft Coupling: Flexible, capable of absorbing torsional vibration and shaft misalignment. (g) Motor: Single speed, with grease-lubricated ball bearings; and resiliently or rigidly mounted to pump casing. To be be assembled, aligned and tested accordance to relevant IS/ISO standards. Capable of preventing overloading and shall have dry run protection (h) The pump shall be fitted with a totally enclosed fan cooled motor to S1 standards with main dimensions according to relevant standards. (i) Pump motors shall be of Efficiency class IE 2 & operating range within 5 % of BEP. (j) Motor enclosure shall be IP 55 in accordance with IS/IEC 60034 : Part 5 : 2000 (Reaffirmed 2007) and motor insulation class shall be of Class F in accordance with IS 1271:1985 (Reaffirmed 2007)/IEC 60085:2004. (k) Electrical: Phase - 3 phase, Capable of withstanding - 360 to 440 volts, Power cable length - extended till the starter panel , Frequency - 50 Hz, RPM - 1450 / 2900 j) Electrical starter panel with cabling upto the pumps and upto STP panel with including cable tray & earth termination complete and necessary level sensors (3 level High, medium & Low), one Strainer at suction side of each pump, Control valves (1 no. to each pump) & control valve 2 no. for common suction & delivery line, NRV (1 no. to each pump) and expansion bellows for each pump. Cost shall be inclusive of Energy meter alongwith panel to measure the power consumption. Panel shall be provided with MODbus/BACnet port connectivity for interface to building automation system for On, Off, Run & alarm status of each pump. (A)Domestic water transfer pumps - Discharge of 2.1 Cum/Hr against a head of 40m (1W+ 1S)

Supply, installation in position, testing and commissioning of electrically driven Factory-assembled and tested, in-line, close-coupled, water feeding pumps of approved make, capable of discharging as indicated below including flexible connectors, check valves, shutoff valves, necessary accessories and electrical works etc. all complete as directed by Engineer in charge. (a) Pump Casing: Cast iron, with wear rings and threaded companion-flange connections. The suction and discharge flanges to be of dimensions in accordance to relevant IS/ISO standards. The pump case shall have both priming and drain hole closed by plugs. (b) Impeller: Stainless steel 304. It is to be statically and dynamically balanced, closed, and keyed to shaft. (c) Shaft and Shaft Sleeve: Stainless steel 304 shaft, with SS shaft sleeve. (d) Seal: Mechanical seal with silicon carbide rotating ring, stainless-steel spring, ceramic seat and rubber bellows and gasket. (e) The bearings are to be ball or roller type protected against ingress of water, dirt and other matter. (f) Shaft Coupling: Flexible, capable of absorbing torsional vibration and shaft misalignment. (g) Motor: Single speed, with grease-lubricated ball bearings; and resiliently or rigidly mounted to pump casing. To be be assembled, aligned and tested accordance to relevant IS/ISO standards. Capable of preventing overloading and shall have dry run protection (h) The pump shall be fitted with a totally enclosed fan cooled motor to S1 standards with main dimensions according to relevant standards. (i) Pump motors shall be of Efficiency class IE 2 & operating range within 5 % of BEP. (j) Motor enclosure shall be IP 55 in accordance with IS/IEC 60034 : Part 5 : 2000 (Reaffirmed 2007) and motor insulation class shall be of Class F in accordance with IS 1271:1985 (Reaffirmed 2007)/IEC 60085:2004. (k) Electrical: Phase - 3 phase, Capable of withstanding - 360 to 440 volts, Power cable length - extended till the starter panel , Frequency - 50 Hz, RPM - 1450 / 2900 j) Electrical starter panel with cabling upto the pumps and upto STP panel with including cable tray & earth termination complete and necessary level sensors (3 level High, medium & Low), one Strainer at suction side of each pump, Control valves (1 no. to each pump) & control valve 2 no. for common suction & delivery line, NRV (1 no. to each pump) and expansion bellows for each pump. Cost shall be inclusive of Energy meter alongwith panel to measure the power consumption. Panel shall be provided with MODbus/BACnet port connectivity for interface to building automation system for On, Off, Run & alarm status of each pump. (B) Flushing water transfer pumps - Discharge of 2.7 Cum/Hr against a head of 45 m (1W+ 1S)

Supply, installation in position, testing and commissioning of electrically driven Factory-assembled and tested, in-line, close-coupled, water feeding pumps of approved make, capable of discharging as indicated below including flexible connectors, check valves, shutoff valves, necessary accessories and electrical works etc. all complete as directed by Engineer in charge. (a) Pump Casing: Cast iron, with wear rings and threaded companion-flange connections. The suction and discharge flanges to be of dimensions in accordance to relevant IS/ISO standards. The pump case shall have both priming and drain hole closed by plugs. (b) Impeller: Stainless steel 304. It is to be statically and dynamically balanced, closed, and keyed to shaft. (c) Shaft and Shaft Sleeve: Stainless steel 304 shaft, with SS shaft sleeve. (d) Seal: Mechanical seal with silicon carbide rotating ring, stainless-steel spring, ceramic seat and rubber bellows and gasket. (e) The bearings are to be ball or roller type protected against ingress of water, dirt and other matter. (f) Shaft Coupling: Flexible, capable of absorbing torsional vibration and shaft misalignment. (g) Motor: Single speed, with grease-lubricated ball bearings; and resiliently or rigidly mounted to pump casing. To be be assembled, aligned and tested accordance to relevant IS/ISO standards. Capable of preventing overloading and shall have dry run protection (h) The pump shall be fitted with a totally enclosed fan cooled motor to S1 standards with main dimensions according to relevant standards. (i) Pump motors shall be of Efficiency class IE 2 & operating range within 5 % of BEP. (j) Motor enclosure shall be IP 55 in accordance with IS/IEC 60034 : Part 5 : 2000 (Reaffirmed 2007) and motor insulation class shall be of Class F in accordance with IS 1271:1985 (Reaffirmed 2007)/IEC 60085:2004. (k) Electrical: Phase - 3 phase, Capable of withstanding - 360 to 440 volts, Power cable length - extended till the starter panel , Frequency - 50 Hz, RPM - 1450 / 2900 j) Electrical starter panel with cabling upto the pumps and upto STP panel with including cable tray & earth termination complete and necessary level sensors (3 level High, medium & Low), one Strainer at suction side of each pump, Control valves (1 no. to each pump) & control valve 2 no. for common suction & delivery line, NRV (1 no. to each pump) and expansion bellows for each pump. Cost shall be inclusive of Energy meter alongwith panel to measure the power consumption. Panel shall be provided with MODbus/BACnet port connectivity for interface to building automation system for On, Off, Run & alarm status of each pump. (C) Irrigation water transfer pumps - Discharge of 2.7 Cum/Hr against a head of 45 m (1W+ 1S)

Providing fixing 300mm wide CI chanel graiting for channel.

Supplying, erecting and commissioning of diesel generating set with alternator of 200 kVA output continuous rating, 3 Phase, 415V, 50c/s 0.8 p. f. A.C a totally enclosed air cooled / liquid cooledmulti-cylinder diesel engine developing suitable BHP at 1500 rpmwith 10% overload for 1 hour in 12 hours, along with standardaccessories, self-excited, self-regulated, screen protected alternatorwith static excitation system running at 1500 RPM as per IS 4722-2001 with voltage regulation +/- 5 %. Both the engine and alternatordirect coupled on a common fabricated steel base frame and mounted on anti-vibrating pads with standard control panel comprising meters, switchgears, indicators connected with suitable wires/cables, the complete set enclosed in composite acoustic enclosure as fully assembled integral unit made of 16 SWG CRCA Sheet, sound absorbing material to restrict sound level upto 75 dB at 1.0 m, provided with first filling of oil, diesel etc. as per specification no.GEN-DG

Supplying, erecting, testing and commissioning of Microprocessor based AMF panel suitable for diesel generating set of above 200 kVA upto 250 kVA capacity Single/Three phase, 230/415 Volts, 50Hz A.C. with all standard features, safeties etc as per specification no. GEN-AMF.. Panel Should be outdoor type & 750mm M.S Stand mounted

Supplying, erecting, testing, commissioning 22 KV H.T. metering cubical (Compact Type) approved by MSEDCL/Licensee fabricated with 2mm.(14 SWG) M.S.sheets with supporting angle and channel, painted with powder coating / epoxy paint of required shade copper bus bar size 25x6 mm electronic security lock and heavy duty mechanical lock, with counter meter for measuring no of times the opening of doors, top side cover ( C.T.P.T COVER) interlock with meter doors, epoxy coated 3 nos C.T having required ratio between 50/5A to 100/5A, VA10,Class0.2S, 22000/V3/110/V3 VA 50, class 0.2 epoxy terminal block suitable for provided trivector meter, and provision for incoming and outgoing cables etc complete duly tested by Licensee with necessary Test Certificates and erected on provided plinth/ C.C foundation

Supplying, installing, testing & commissioning 3 phase, 22/0.433 kV, 50 Hz., 200 kVA, oil immersed and naturally cooled outdoor type, copper wound transformer, delta/star connected with additional neutral brought out on load side, temperature rise should not exceed 40oC by thermometer in oil and 45oC by the resistance in winding at full load rating, with HV tapping (with off load tap changer) off load +5 to -10 in steps of 2.5%, with standard accessories complete with test certificate with losses below 819 Watts at 50% load, 2415 Watts at 100% load as per IS:1180 - 2014 energy efficiency level II with necessary permissions of Electrical Inspector, as per specification no SS- TR.

Supplying & erecting 3 C x 185 sq.mm 22 kV, XLPE armoured cable on wall/ceiling or laid in provided trench /pipe / thro' ready trench, through RCC pipes (already laid), in air, in prepared RCC trench including supplying and providing clamps supports.

Supplying & erecting 3 C x 240 sq.mm 22 kV, XLPE armoured cable on wall/ceiling or laid in provided trench /pipe / thro' ready trench, through RCC pipes (already laid), in air, in prepared RCC trench including supplying and providing clamps supports.

Excavating soft murum / soft soil road by chiselling for preparing pit for poles stay or earth plates or for laying cables, pipes & clearing the site by removing debris & making the site good complete.

Excavating hard Rock or bituminous road by chiselling for preparing pit for pole / stay/earth plate / for laying cable/ pipe & clearing the site by removing debris & making the site as required complete.

Supplying & laying (including excavation) 25 cm dia RCC Hume pipe of standard thickness at required depth up to 90 cms. below road / ground surface, for covering provided cable & necessary back filling with light ramming to make the road/ground surface as it was (Except bitumen carpet).

Supplying & laying (including excavation) 25 cm Dia half round RCC Hume pipe of standard thickness at required depth up to 90 cms. below road / ground surface, for enclosing provided cable & necessary back filling with light ramming to make the road/ground surface as it was (Except bitumen carpet).

Providing and erecting Heat shrinkable outdoor termination kit for 22 kV ( E )/33 kV (UE) XLPE HT cable 3x185 to 240 sq. mm. with necessary material as per specification no. CB-JT/HT

Providing and erecting Heat shrinkable indoor termination kit for 22 kV ( E )/33 kV (UE) XLPE HT cable 3x185 to 240 sq. mm. with necessary material as per specification no. CB-JT/HT

Supply, Installation, Testing and commissioning of UL Certified / CPRI Tested Maintenance Free Earthing comprising of Electrode of 17.2 mm diameter Low Carbon Steel with 250 micron Molecular Copper Bonded Earthing Rod of Length 3m along with 25 kg Carbon Based environment friendly back fill Ground Enhancing compound required to fill up the excavated earth with required quantity as per specification complete with massonry inspection chamberwith 300 X 450 mm (or nearest standerd size ) C.I. cover, test link etc complete including boring, refilling, levelling etc. to obtain Earth Resistance up to Approx. 1 OHM.

Providing earthing with copper earth plate size 60 x 60 x 0.315 cm with funnel with a wire mesh for watering and brick masonry block C.l. cover with minimum 25 kg Carbon based environment friendly back fill Ground Enhancing compound complete with all materials, testing & recording the results as per specification no ESE -LA

Supplying & erecting Galvanised cast iron earth plate size 60 x 60 x 0.6 cms.buried in specifically prepared earth pit 1.5 mtr. below ground with layers of charcoal with 19mm. dia. G.l. pipe with funnel with a wire mesh for watering and brick masonry block C.l. cover complete as per para 7.3 of l.S. 3043 with necessary length of G.l. earth Strip 50 x 6 mm bolted with the plate and covered in 25 mm. dia. G.l. pipe 2 mtr. long complete duly tested by earth tester and recording the results.

Supplying & erecting G.I.strip of any size laid underground 600 mm deep including eacavation, refilling etc. or clamped with saddles / spacers on structure or on surface, cable tray. Strip to be bolted and welded for continuity and joints to be painted by anticorrosive paint / compound.

Supplying and erecting copper strip of required size used for earthing on wall and/or any other purpose with necessary copper clamps fixed on wall joint should be breazing and painted with bituminous paint in an approved manner with joints required.

LIASON & CO-ORDINATION with MSEDCL& EI for following Submission Application for load sanction extension with follow-up for approval & Approval of Installation Drawings before start of work. Survey & approval of Installation location. Inspection and approval of the installation under scope of this tender (H.T. & L.T.) Co-ordination with MSEDCL for commissioning of the installation. Any other activity / approval related to the scope of this tenderer. Submission of required Test Reports to / MSEDCL Contractor shall pay statutory fees of liaison & this shall be reimbursed from client after submitting receipts.

Supply, installation, testing, commissioning of power Distribution panel with following specification panel fabricated out of 14 SWG (2.0 mm) CRCA sheet steel in cubicle compartmentalized (Form 4), free standing floor mounted, dust and vermin proof with reinforcement of suitable size angle iron, channel, `T’ sections and / or flats wherever necessary. 10 SWG (3.0 mm) thick cable gland plates & Base Channel shall be provided on top or bottom of the panels & The front door, body and partition are made of 14 SWG (2.0 mm) sheet steel. Panels shall be treated with all anti corrosive process before powder coating as per specifications (8 or 9 Tank process) and final approved shade as per MSEDCL/CLIENT/CONSULTANT Requirement. 2 Nos. earthing terminals shall be provided for all distribution panels with 50 X 6mm AL. Continuous earthing strip in Panel. Panels shall be suitable for 415V, 3 phase, 4 wire, 50 Hz supply system, Draw out type. Lifting hooks for all sections shall also be provided. Approval shall be taken for each panel in the form of shop drawings. Galvanized hardware with zinc Passivation shall be used in fabrication of panels. Refer Respective SLD for details. For Indoor = IP 54 * All TP Switchgear should have with heavy Neutral Link for Neutral termination. * SPD specified Class B=Class I, Class B+C = Class I+II & Class C=Class III & Panel Builder should maintain SPD distance from main incomer as per given in Standard manufacturer guideline (Max. 500 mm from termination to earth bus) also MOV technology for SPD is Optional, if it workable then Client/consultant have rights to operate MOV type SPD. *At a time of Panel fabrication, Panel Manufacturer need to submit final VA burden calc. for each CT for consultant approval (Above description same as all Panel) MAIN LT PANEL INCOMING: 400A FP, ATS with Controller Equivalent to Asco - 1 No. 400A FP 25 kA MCCB with earth fault, over load, short circuit, under voltage, over voltage protection - (MP Release) Class B Type SPD with Fuse Protection - 1 No. (Equivalent to OBO) METERING & PROTECTION: 400/5A, 15VA, Cl. 1 Current Transformer. - 1 Set Multi Function Meter - V, A, kWH, kVAR, PF (RS 485) with 2A TP MCB - 1 Set RYB LED Type phase indicating lamps with 2A TP MCB - 1 Set Test & Reset pushbutton - 1 Set BUSBAR: 400 A TPN Al. Bus Bars of suitable length. Bus bars shall be colour coded and insulated by Heat Shrink Sleeves. The current density of Bus bar shall be 1 sq.mm. / 1 amp - 1 set OUTGOING: 1 Set of 250 A TP+N 25 kA MCCB each with over current and short circuit protection (TM Released) 1 Sets of 200 A TP+N 25 kA MCCB each with over current and short circuit protection (TM Released) 2 Sets of 100 A TP+N 25 kA MCCB each with over current and short circuit protection (TM Released) 2 Sets of 63 A TPN 10 kA MCB 1 Set of 32 A TPN 10 kA MCB SPARES: 1 Set of 250 A TP+N 25 kA MCCB each with over current and short circuit protection (TM Released) 1 Set of 100 A TP+N 25 kA MCCB each with over current and short circuit protection (TM Released)

MAIN LIGHTING PANEL INCOMING: 250 A FP, 25kA, MCCB with earth fault, over current and short circuit protection - 1 No. (MP Released) Class B+C Type SPD with Fuse Protection - 1 No. (Equivalent to OBO) METERING & PROTECTION: 250/5A, 15VA, Cl. 1 Current Transformer. - 1 Set Multi Function Meter - V, A, kWH, kVAR, PF (RS 485) with 2A TP MCB - 1 Set RYB LED Type phase indicating lamps with 2A TP MCB - 1 Set BUSBAR: 250 A TPN Aluminium Bus Bars of suitable length. Bus bars shall be colour coded and insulated by Heat Shrink Sleeves. The current density of Bus bar shall be 1 sq.mm. / 1 amp - 1 set OUTGOING: 2 Sets of 63 A FP 10 kA MCB 2 Set of 32 A FP 10 kA MCB 4 Sets of 25 A FP 10 kA MCB 1 Set of 20 A FP 10 kA MCB SPARES: 2 Sets of 40 A FP 10 kA MCB

MAIN UPS IN/OUT PANEL INCOMING: 100 A FP, 16kA, MCCB with earth fault, over current and short circuit protection - 1 No. (MP Released) Class B+C Type SPD with Fuse Protection - 1 No. (Equivalent to OBO) METERING & PROTECTION: 100/5A, 15VA, Cl. 1 Current Transformer. - 1 Set Multi Function Meter - V, A, kWH, kVAR, PF (RS 485) with 2A TP MCB - 1 Set RYB LED Type phase indicating lamps with 2A TP MCB - 1 Set BUSBAR: DOUBLE BUSBAR - 100 A FP Al. Bus Bars of suitable length. Bus bars shall be colour coded and insulated by Heat Shrink Sleeves. The current density of Bus bar shall be 1 sq.mm. / 1 amp - 1 set 6 Sets of 40 A FP 10 kA MCB + 100 A FP, 16 kA, MCCB AS BYPASS OUTGOING: 3 Sets of 32 A FP 10 kA MCB 2 Sets of 20 A FP 10 kA MCB 5 Sets of 20 A DP 10 kA MCB SPARES: 1 Set of 32 A FP 10 kA MCB 1 Set of 20 A FP 10 kA MCB 1 Set of 20 A DP 10 kA MCB

PHE PANEL INCOMING 63 A FP 10 kA MCB - 1 No Class B+C Type SPD with Fuse Protection - 1 No. (Equivalent to OBO) METERING & PROTECTION: Multi Function Meter - V, A, kWH, kVAR, PF (RS 485) with 2A TP MCB - 1 Set RYB LED Type phase indicating lamps with 2A TP MCB - 1 Set BUSBAR: 63 A FP Copper Bus Bars of suitable length. Bus bars shall be colour coded and insulated by Heat Shrink Sleeves. The current density of Bus bar shall be 1 sq.mm. / 1.6 amp - 1 set OUTGOING: As per Submited SLD SPARES: As per Submited SLD

LIFT PANEL INCOMING: 63 A FP 10 kA MCB - 1 No. Class B+C Type SPD with Fuse Protection - 1 No. (Equivalent to OBO) METERING & PROTECTION: Multi Function Meter - V, A, kWH, kVAR, PF (RS 485) with 2A TP MCB - 1 Set RYB LED Type phase indicating lamps with 2A TP MCB - 1 Set BUSBAR 63 A FP Copper Bus Bars of suitable length. Bus bars shall be colour coded and insulated by Heat Shrink Sleeves. The current density of Bus bar shall be 1 sq.mm. / 1.6 amp - 1 set OUTGOING 3 Sets of 40A FP 10 kA RCBO, 300mA 2 Sets of 16A DP 10 kA, MCB SPARES: 1 Set of 40A FP 10 kA RCBO, 300mA 1 Set of 16A DP 10 kA, MCB

HVAC PANEL INCOMING: 100 A FP, 16kA, MCCB with earth fault, over current and short circuit protection - 1 No. (MP Released) Class B+C Type SPD with Fuse Protection - 1 No. (Equivalent to OBO) METERING & PROTECTION: 100/5A, 15VA, Cl. 1 Current Transformer. - 1 Set Multi Function Meter - V, A, kWH, kVAR, PF (RS 485) with 2A TP MCB - 1 Set RYB LED Type phase indicating lamps with 2A TP MCB - 1 Set BUSBAR: 100 A FP Al. Bus Bars of suitable length. Bus bars shall be colour coded and insulated by Heat Shrink Sleeves. The current density of Bus bar shall be 1 sq.mm. / 1 amp - 1 set OUTGOING: 3 Sets of 40 A FP 10 kA MCB SPARES: 2 Sets of 40 A FP 10 kA MCB

SITC of 1100 V grade XLPE insulated sheathed & steel armoured Aluminium Conductor cables. Unloading by crane, shifting to place of work and laid on walls / ceiling / ready made trench / Cable tray / Through underground RCC pipes / including spacers / saddles / clamps / G.I. Hardware as required, (M.S. cable trays supports / cable trays, RCC pipes covered by seperate items ) with Termination of cable using screwed flange type eliptical / conical, heavy duty brass glands, crimping sockets including supply of glands / sockets / consumbles crimping pest etc. for cables as udner : (Samples of glands to be approved by consultants. Here ordinary ' Siemens ' type glands are not to be supplied). 3.5 C X 300 Sq. mm. A Y F Y XLPE

SITC of 1100 V grade XLPE insulated sheathed & steel armoured Aluminium Conductor cables. Unloading by crane, shifting to place of work and laid on walls / ceiling / ready made trench / Cable tray / Through underground RCC pipes / including spacers / saddles / clamps / G.I. Hardware as required, (M.S. cable trays supports / cable trays, RCC pipes covered by seperate items ) with Termination of cable using screwed flange type eliptical / conical, heavy duty brass glands, crimping sockets including supply of glands / sockets / consumbles crimping pest etc. for cables as udner : (Samples of glands to be approved by consultants. Here ordinary ' Siemens ' type glands are not to be supplied). 3.5 C X 240 Sq. mm. A Y F Y XLPE

SITC of 1100 V grade XLPE insulated sheathed & steel armoured Aluminium Conductor cables. Unloading by crane, shifting to place of work and laid on walls / ceiling / ready made trench / Cable tray / Through underground RCC pipes / including spacers / saddles / clamps / G.I. Hardware as required, (M.S. cable trays supports / cable trays, RCC pipes covered by seperate items ) with Termination of cable using screwed flange type eliptical / conical, heavy duty brass glands, crimping sockets including supply of glands / sockets / consumbles crimping pest etc. for cables as udner : (Samples of glands to be approved by consultants. Here ordinary ' Siemens ' type glands are not to be supplied). 3.5 C X 185 Sq. mm. A Y F Y XLPE

SITC of 1100 V grade XLPE insulated sheathed & steel armoured Aluminium Conductor cables. Unloading by crane, shifting to place of work and laid on walls / ceiling / ready made trench / Cable tray / Through underground RCC pipes / including spacers / saddles / clamps / G.I. Hardware as required, (M.S. cable trays supports / cable trays, RCC pipes covered by seperate items ) with Termination of cable using screwed flange type eliptical / conical, heavy duty brass glands, crimping sockets including supply of glands / sockets / consumbles crimping pest etc. for cables as udner : (Samples of glands to be approved by consultants. Here ordinary ' Siemens ' type glands are not to be supplied). 3.5 C X 150 Sq. mm. A Y F Y XLPE

SITC of 1100 V grade XLPE insulated sheathed & steel armoured Aluminium Conductor cables. Unloading by crane, shifting to place of work and laid on walls / ceiling / ready made trench / Cable tray / Through underground RCC pipes / including spacers / saddles / clamps / G.I. Hardware as required, (M.S. cable trays supports / cable trays, RCC pipes covered by seperate items ) with Termination of cable using screwed flange type eliptical / conical, heavy duty brass glands, crimping sockets including supply of glands / sockets / consumbles crimping pest etc. for cables as udner : (Samples of glands to be approved by consultants. Here ordinary ' Siemens ' type glands are not to be supplied). 3.5 C X 120 Sq. mm. A Y F Y XLPE

SITC of 1100 V grade XLPE insulated sheathed & steel armoured Aluminium Conductor cables. Unloading by crane, shifting to place of work and laid on walls / ceiling / ready made trench / Cable tray / Through underground RCC pipes / including spacers / saddles / clamps / G.I. Hardware as required, (M.S. cable trays supports / cable trays, RCC pipes covered by seperate items ) with Termination of cable using screwed flange type eliptical / conical, heavy duty brass glands, crimping sockets including supply of glands / sockets / consumbles crimping pest etc. for cables as udner : (Samples of glands to be approved by consultants. Here ordinary ' Siemens ' type glands are not to be supplied). 3.5 C X 95 Sq. mm. A Y F Y XLPE

SITC of 1100 V grade XLPE insulated sheathed & steel armoured Aluminium Conductor cables. Unloading by crane, shifting to place of work and laid on walls / ceiling / ready made trench / Cable tray / Through underground RCC pipes / including spacers / saddles / clamps / G.I. Hardware as required, (M.S. cable trays supports / cable trays, RCC pipes covered by seperate items ) with Termination of cable using screwed flange type eliptical / conical, heavy duty brass glands, crimping sockets including supply of glands / sockets / consumbles crimping pest etc. for cables as udner : (Samples of glands to be approved by consultants. Here ordinary ' Siemens ' type glands are not to be supplied). 3.5 C X 70 Sq. mm. A Y F Y XLPE

SITC of 1100 V grade XLPE insulated sheathed & steel armoured Aluminium Conductor cables. Unloading by crane, shifting to place of work and laid on walls / ceiling / ready made trench / Cable tray / Through underground RCC pipes / including spacers / saddles / clamps / G.I. Hardware as required, (M.S. cable trays supports / cable trays, RCC pipes covered by seperate items ) with Termination of cable using screwed flange type eliptical / conical, heavy duty brass glands, crimping sockets including supply of glands / sockets / consumbles crimping pest etc. for cables as udner : (Samples of glands to be approved by consultants. Here ordinary ' Siemens ' type glands are not to be supplied). 3.5 C X 50 Sq. mm. A Y F Y XLPE

SITC of 1100 V grade XLPE insulated sheathed & steel armoured Aluminium Conductor cables. Unloading by crane, shifting to place of work and laid on walls / ceiling / ready made trench / Cable tray / Through underground RCC pipes / including spacers / saddles / clamps / G.I. Hardware as required, (M.S. cable trays supports / cable trays, RCC pipes covered by seperate items ) with Termination of cable using screwed flange type eliptical / conical, heavy duty brass glands, crimping sockets including supply of glands / sockets / consumbles crimping pest etc. for cables as udner : (Samples of glands to be approved by consultants. Here ordinary ' Siemens ' type glands are not to be supplied). 3.5 C X 35 Sq. mm. A Y F Y XLPE

SITC of 1100 V grade XLPE insulated sheathed & steel armoured Aluminium Conductor cables. Unloading by crane, shifting to place of work and laid on walls / ceiling / ready made trench / Cable tray / Through underground RCC pipes / including spacers / saddles / clamps / G.I. Hardware as required, (M.S. cable trays supports / cable trays, RCC pipes covered by seperate items ) with Termination of cable using screwed flange type eliptical / conical, heavy duty brass glands, crimping sockets including supply of glands / sockets / consumbles crimping pest etc. for cables as udner : (Samples of glands to be approved by consultants. Here ordinary ' Siemens ' type glands are not to be supplied). 4 C X 25 Sq. mm. A Y F Y XLPE

SITC of 1100 V grade XLPE insulated sheathed & steel armoured Aluminium Conductor cables. Unloading by crane, shifting to place of work and laid on walls / ceiling / ready made trench / Cable tray / Through underground RCC pipes / including spacers / saddles / clamps / G.I. Hardware as required, (M.S. cable trays supports / cable trays, RCC pipes covered by seperate items ) with Termination of cable using screwed flange type eliptical / conical, heavy duty brass glands, crimping sockets including supply of glands / sockets / consumbles crimping pest etc. for cables as udner : (Samples of glands to be approved by consultants. Here ordinary ' Siemens ' type glands are not to be supplied). 4 C X 16 Sq. mm. A Y F Y XLPE

SITC of 1100 V grade XLPE insulated sheathed & steel armoured Aluminium Conductor cables. Unloading by crane, shifting to place of work and laid on walls / ceiling / ready made trench / Cable tray / Through underground RCC pipes / including spacers / saddles / clamps / G.I. Hardware as required, (M.S. cable trays supports / cable trays, RCC pipes covered by seperate items ) with Termination of cable using screwed flange type eliptical / conical, heavy duty brass glands, crimping sockets including supply of glands / sockets / consumbles crimping pest etc. for cables as udner : (Samples of glands to be approved by consultants. Here ordinary ' Siemens ' type glands are not to be supplied). 4 C X 10 Sq. mm. A Y F Y XLPE

SITC of 1100 V grade XLPE insulated sheathed & steel armoured Aluminium Conductor cables. Unloading by crane, shifting to place of work and laid on walls / ceiling / ready made trench / Cable tray / Through underground RCC pipes / including spacers / saddles / clamps / G.I. Hardware as required, (M.S. cable trays supports / cable trays, RCC pipes covered by seperate items ) with Termination of cable using screwed flange type eliptical / conical, heavy duty brass glands, crimping sockets including supply of glands / sockets / consumbles crimping pest etc. for cables as udner : (Samples of glands to be approved by consultants. Here ordinary ' Siemens ' type glands are not to be supplied). 4 C X 6 Sq. mm.Y W Y(Copper) XLPE

SITC of 1100 V grade XLPE insulated sheathed & steel armoured Aluminium Conductor cables. Unloading by crane, shifting to place of work and laid on walls / ceiling / ready made trench / Cable tray / Through underground RCC pipes / including spacers / saddles / clamps / G.I. Hardware as required, (M.S. cable trays supports / cable trays, RCC pipes covered by seperate items ) with Termination of cable using screwed flange type eliptical / conical, heavy duty brass glands, crimping sockets including supply of glands / sockets / consumbles crimping pest etc. for cables as udner : (Samples of glands to be approved by consultants. Here ordinary ' Siemens ' type glands are not to be supplied). 4 C X 4 Sq. mm. Y W Y XLPE (Copper) XLPE

SITC of 1100 V grade XLPE insulated sheathed & steel armoured Aluminium Conductor cables. Unloading by crane, shifting to place of work and laid on walls / ceiling / ready made trench / Cable tray / Through underground RCC pipes / including spacers / saddles / clamps / G.I. Hardware as required, (M.S. cable trays supports / cable trays, RCC pipes covered by seperate items ) with Termination of cable using screwed flange type eliptical / conical, heavy duty brass glands, crimping sockets including supply of glands / sockets / consumbles crimping pest etc. for cables as udner : (Samples of glands to be approved by consultants. Here ordinary ' Siemens ' type glands are not to be supplied). 3 C X 2.5 Sq. mm. Y W Y XLPE (Copper) XLPE

Supplying and laying (including excavation) 90 mm outside dia. double wall corrugated pipes (DWC) of HDPE for enclosing cable below ground/road surface, to required depth complete.

Supplying, erecting & marking FPMCB 40A to 63A in provided distribution board as per specification no. SW-SWR/MCB with Supplying & erecting CRCA sheet metal one way enclosures suitable for DP MCB /TP MCB /FP MCB erected on angle iron/GI frame complete.

Supplying and laying of Hot deeped Galvanised Perforated type Cable tray manufactured from 16 swg (1.6 mm thick), including couplers, G.I. Bolts, nusts, washers, necessary G.I. Hardware to be mounted on M.S fabricated supports (considered in separate item.) Sizes as follows 500 x 75 mm.

Supplying and laying of Hot deeped Galvanised Perforated type Cable tray manufactured from 16 swg (1.6 mm thick), including couplers, G.I. Bolts, nusts, washers, necessary G.I. Hardware to be mounted on M.S fabricated supports (considered in separate item.) Sizes as follows 400 x 75 mm.

Supplying and laying of Hot deeped Galvanised Perforated type Cable tray manufactured from 16 swg (1.6 mm thick), including couplers, G.I. Bolts, nusts, washers, necessary G.I. Hardware to be mounted on M.S fabricated supports (considered in separate item.) Sizes as follows 300 x 50/75 mm.

Supplying and laying of Hot deeped Galvanised Perforated type Cable tray manufactured from 16 swg (1.6 mm thick), including couplers, G.I. Bolts, nusts, washers, necessary G.I. Hardware to be mounted on M.S fabricated supports (considered in separate item.) Sizes as follows 200 x 50/75 mm.

SITC of Hot deeped Galvanised cover suitable for Cable tray cover manufactured from 18 swg (1.2 mm thick) GI sheet with necessary G.I. screws & Hardwares. Sizes as follows (For trays item )500 x 20 mm.

SITC of Hot deeped Galvanised cover suitable for Cable tray cover manufactured from 18 swg (1.2 mm thick) GI sheet with necessary G.I. screws & Hardwares. Sizes as follows (For trays item ) 400 x 20 mm.

SITC of Hot deeped Galvanised cover suitable for Cable tray cover manufactured from 18 swg (1.2 mm thick) GI sheet with necessary G.I. screws & Hardwares. Sizes as follows (For trays item )300 x 20 mm.

SITC of Hot deeped Galvanised cover suitable for Cable tray cover manufactured from 18 swg (1.2 mm thick) GI sheet with necessary G.I. screws & Hardwares. Sizes as follows (For trays item ) 200 x 20 mm.

SITC of M.S fabricated supports for cable trays of M.S sections welded to structure / clamped to sturucture / wall, using anchor bolts where required including G.I. hardware & painting with Two coats of Red oxide primer & 2 coats of eamel paint of approved shade.

SITC of Hitech suspension Support G.I. 10 MM dia Threaded Tie Rod for supporting of cable tray of any length with G.I Hardware,, install between Trusses G.I. Rail Channel Strip / Trusses welded clamp & supporting angle / GI Rail Channel strip below of cable tray. ( Supporting angle/ welded strip/ Rail Channel covered in separate item)

SITC of Hitech Support G.I. 2 MM Thick X 30 mm Width Rail Channel strip for supporting of cable tray of any length, install on Trusses & supporting of cable tray. ( Supporting Threaded Rod & welded strip covered in separate item)

Supplying & erecting triple pole and neutral distribution board (TPNDB) with door surface/ flush mounted SPMCB of 12 ways, on iron /GI frame (horizontal busbar type) as per specification no.SW-SWR/MCBDB

Supplying & erecting triple pole and neutral distribution board (TPNDB) with door surface/ flush mounted SP / TP MCBs of 24 ways on iron/ GI frame (vertical busbar type) as per specification no. SW-SWR/MCBDB

Supplying & erecting triple pole and neutral Double Door (IP 43) distribution board (TPNDB) with door surface/ flush mounted SPMCB of 24 ways, on iron/ GI frame/wooden board.(horizontal busbar type) as per specification no. SW-SWR/MCBDB (8way TPN)

Supplying & erecting triple pole and neutral Double Door (IP 43) distribution board (TPNDB) with door surface/ flush mounted SPMCB of 12 ways/phase (36 poles) on iron/ GI frame (horizontal busbar type) as per specification no. SW-SWR/MCBDB (12way TPN)

Supplying & erecting triple pole and neutral Double Door (IP 43) distribution board (TPNDB) with door surface/ flush mounted SPMCB of 16 ways/phase (42 poles) on iron/ GI frame (horizontal busbar type) as per specification no. SW-SWR/MCBDB (16way TPN)

Supplying and erecting single pole and neutral distribution board (SPNDB) with door surface/flush mounted with 2 ways for incoming and 6 ways for outgoing SP MCB’s on iron/ GI frame as per specification no. SW-SWR/MCBDB (8 Way SPN)

Supplying and erecting single pole and neutral distribution board (SPNDB) with door surface/flush mounted with 2 ways for incoming and 10 ways for outgoing SP MCB’s on iron/ GI frame as per specification no. SW-SWR/MCBDB (12 Way SPN)

Supplying, erecting & marking FPMCB 6A to 32A in provided distribution board as per specification no. SW-SWR/MCB

Supplying, erecting & marking FPMCB 40A to 63A in provided distribution board as per specification no. SW-SWR/MCB

Providing, erecting and commissioning 2 pole RCCB only of electromagnetic type with 30/100/300 mA sensitivity and having capacity of 63A complete as per specification no. SWRCCB/RCCB

Providing, erecting and commissioning 2 pole RCCB only of electromagnetic type with 30/100/300 mA sensitivity and having capacity of 40A complete as per specification no. SWRCCB/RCCB

Providing, erecting and commissioning 2 pole RCCB only of electromagnetic type with 30/100/300 mA sensitivity and having capacity of 16/ 25A complete as per specification no. SWRCCB/RCCB

Supplying, erecting & marking SPMCB 6A to 32A, C-series (for motor/power) in provided distribution board as per specification no. SW-SWR/MCB (Supply & Erection including Supply of supporting M.S. Frame).

Supplying, fixing and commissioning 2 pole,RCBO (residual current breaker with overcurrent short circuit 10 kA and earth leakage protection), with 30/100/300 mA sensitivity and having capacity of 6/10/16/20/25A, as per specification no SWRCCB/ RCBO

Supplying, fixing and commissioning 4 pole RCBO ( (residual current breaker with overcurrent short circuit 10 kA and earth leakage protection), with 30/100/300 mA sensitivity and having capacity of 6A/10A/16A/20A/25/A as per specification no SWRCCB/RCBO

Supplying and Installation of MCB Distribution Boards with Double Door (IP 43) to be mounted on M.S. Frame welded to structure / grouted in wall. The M.S. frame should be painted with 2 Coats of Zinc chromate primer & 2 Coats of enamel paint. 8 Way TPN DB (Vertical) with TP outgoing

Supplying and Installation of MCB Distribution Boards with Double Door (IP 43) to be mounted on M.S. Frame welded to structure / grouted in wall. The M.S. frame should be painted with 2 Coats of Zinc chromate primer & 2 Coats of enamel paint. 8 Way TPN DB (Vertical) with TP outgoing comprising of 160 A / 200 TP MCCB 35 KA

Supplying and Installation of MCB Distribution Boards with Double Door (IP 43) to be mounted on M.S. Frame welded to structure / grouted in wall. The M.S. frame should be painted with 2 Coats of Zinc chromate primer & 2 Coats of enamel paint. 8 Way TPN DB (Vertical) with TP outgoing comprising of 16 A To 32 A TP MCB (10 KA)

Supplying and Installation of MCB Distribution Boards with Double Door (IP 43) to be mounted on M.S. Frame welded to structure / grouted in wall. The M.S. frame should be painted with 2 Coats of Zinc chromate primer & 2 Coats of enamel paint. 8 Way TPN DB (Vertical) with TP outgoing comprising of 63 A FP RCBO (20 KA)

Supplying and Installation of MCB Distribution Boards with Double Door (IP 43) to be mounted on M.S. Frame welded to structure / grouted in wall. The M.S. frame should be painted with 2 Coats of Zinc chromate primer & 2 Coats of enamel paint. 8 Way TPN DB (Vertical) with TP outgoing comprising of 6 to 32A DP MCB's " C " 10 KA.

Supplying and Installation of MCB Distribution Boards with Double Door (IP 43) to be mounted on M.S. Frame welded to structure / grouted in wall. The M.S. frame should be painted with 2 Coats of Zinc chromate primer & 2 Coats of enamel paint. 8 Way TPN DB (Vertical) with TP outgoing comprising of 40 A To 63 A TP MCB (10 KA) (Supply & Erection including Supply of supporting M.S. Frame).

Supply, Installation, testing & commissioning of On line UPS pure sine wave of 15 kVA capacity complete with standard features, along with necessary SMF batteries for 15 mins battery backup, Rack, Interconnecting cable & 3 phase output (N+1 Configuration) Battery back-up for 3 UPS only Input Voltage : 400/415/433 V, AC +/- 10% 3 phase 4 wire Output Voltage : 400/415/433 V AC, +/- 2% 3 phase 4 wire Output wave form : Pure Sine wave & Zero ms transfer time, P.F: 0.99 OVERLOAD CAPACITY : 125% for 10 minutes; 150% for 1 minute Operating Conditions : Temp : 0-50Deg C Humidity : 20 to 90% non condensing EFFICIENCY : > 95% on Full Load & > 94% between 25% to 50% Load Rated I/P & O/P Frequency : 50 Hz, +/- 2% Battery back up : 15 Min. @ full load UPS capacity Battery Type : 12 V or As per Standard, lead acid Sealed Maintenance Free battery bank, Constant Current & Constant Voltage Charging Indicators/Display : AC Input supply/AC & DC output supply/Battery charging Load Level, Battery Level, AC Mode, Battery mode, Bypass mode and Fault indicators Metering : Input : AC Voltage, AC current, frequency : Output : AC Voltage, AC current, frequenc, : DC voltage, DC current Protection : Output spike protection, Over current protection Alarms : AC fail, Load on battery, Low battery Noise level : less than 55 dB at 1 mtr. Cooling System : Air natural

Supply and erection Metal Clad combined switch socket (Manufactured version only) comprising 1 No. 20 A 2 Pin & Earth Socket, with chain & Plug Top etc. completed & 20 A SP MCB complete with interconnection and with MS bracket (with primer / enamel paint 4 coats as above) welded to structure or mounted on wall and suitable to receive 2 Nos. PVC insulated and armoured cables.

Supplying & erecting original 1.25 mm CRCA sheet metal enclosures with 30 A, 3 pin plug & earth socket and 30 A 3 pin plug top with 30 A. triple pole MCB complete erected on angle iron frame.

Supplying SMC chequered plates, hot press moulded from advanced composites of plastics namely sheet moulding compound of thickness 2.5 mm with insulation level upto 22 kV and fixing it to substation floor with SR-998 adhesive along with 5 mm thick E.P. foam complete.

Supplying and fixing PVC Synthetic elastomer electrically insulating mat with class A insulation conforming to IS: 15652 – 2006 & CPRI tested having 2 mm thickness upto 3.3 Kv

Supplying & erecting Carbon Dioxide (CO2) fire extinguisher of 4.5 kg. Capacity Cartridge type conf. To IS 2878 Complete erected with necessary clamp made front 50x6 mm. M. S. flat with nut & bolts grouted in wall complete.

Providing round bottom FIRE Bucket of 9 Litres capacity as per IS : 2546 made out of 24 gauge G.I. sheet with extra handle at bottom duly painted white inside and red outside with FIRE Mark, on provided stand/ wall hook.

Providing floor mounting stand for keeping 4 Nos. of FIRE buckets 1500mm in length, 900mm in height frame made out of 30x30x4 mm. angle iron with cross supports for legs, welded with 4 hooks and duly painted with one coat of red lead and two coats of silver paint.

Providing printed instruction chart for treating persons suffering from electric shock, printed in English & Marathi and duly laminated.

Provided pair of duly tested rubber hand gloves as per IS :340715 suitable for working on 22kV supply.

Supplying, installing, testing and commissioning solar street light pole comprising of 12W x 2 nos. LED fittings, 12V min. 100Ah maintenance free lithium battery, min. 120Wp SPV module, MS powder coated battery box weather proof, mounted on 75/80 mm dia. B-Grade GI pole of 6 m. height along with brackets, foundation, earthling and necessary accessories complete. Specification no. ESDSOL-STL

Supplying, installing, testing and commissioning solar street light pole comprising of 14W LED fitting, 12V 36Ah maintenance free lithium battery, min. 75Wp SPV module, MS powder coated battery box weather proof, mounted on 75/80 mm dia. B-Grade GI pole of 6 m. height along with brackets, foundation, earthling and necessary accessories complete. Specification no. ESD-SOL-STL (with 5 years warrantee )

Making M- 20 grade reinforced cement concrete foundation by considering the safe soil bearing capacity at site as 10 T/Sq.m at 1.5 m depth including supply of steel, concrete, excavation and fixing provided nut bolts with the help of template, duly plastered as per design complete (for 6m to 8m high octagonal /conical GI pole).

Point wiring for light on above false ceiling and concealed (Hybrid type Surface type under false ceiling and concealed type for drops & switch boards on walls) in Wall, Panels, etc with min. 25mm H.G. PVC Conduit, accessories like Junction Boxes, Couplers, spacers, Saddles etc. using 3 x 1.5 Sq.mm. [P, N, E] Multistranded Copper Conductor, FRLS PVC insulated, 1100 V grade, Color Coded, ISI marked wires, Modular Version Switch & Accessories. The Point from Switch Board to 3 Plate ceiling rose / holder & one Light Points controlled by one 6 A S.P. Switch / bell push complete. primary light point length of up to 6 Mtr.

Secondary point wiring for additional light/ bell point, concealed type in min 20 mm PVC conduit with 1.5 sq.mm. (2+1E) FR/FRLSH grade copper wires with required accessories as per specification No: WG-PW/CW. using 3 x 1.5 Sq.mm. [P, N, E] Multistranded Copper Conductor, FRLS PVC insulated, 1100 V grade, Color Coded, ISI marked wires, Modular Version Switch & Accessories.

Wiring for Primary Light Point - Controlled from Distribution board SPMCB, SITC Point wiring for the light points using 2 X 2.5 sq. mm PVC insulated copper conductor 1100 volts grade stranded flexible FRLS wires in rigid MMS PVC conduits of 25mm and 1.8mm wall thickness ISI mark, open/concealed in wall & ceiling with necessary boxes/pull boxes complete 1.5 sq.mm PVC insulated copper conductor stranded flexible FRLS Earth wire. The wiring shall include the connection provision with connector/terminal/ceiling rose for lighting point. The cost of MCB and DB shall be not consider in the rate and will paid separately in section of Distribution Boards. primary light point length of up to 6 Mtr.

Secondary point Same as item no. 1.3) above but using 2 X 1.5 sq. mm PVC insulated copper conductor 1100 volts grade stranded flexible FRLS wires in rigid MMS PVC conduits of 25mm and 1.8mm wall thickness ISI mark, open/concealed in wall & ceiling with necessary boxes/pull boxes complete 1.5 sq.mm PVC insulated copper conductor stranded flexible FRLS Earth wire (Controlling MCB is included in above item)

Point wiring for light on above false ceiling and concealed in Wall, Panels, etc with min. 25mm H.G. PVC Conduit, accessories like Junction Boxes, Couplers, spacers, Saddles etc. using 3 x 1.5 Sq.mm. [P, N, E] Multistranded Copper Conductor, FRLS PVC insulated, 1100 V grade, Color Coded, ISI marked wires, Modular Version Switch & Accessories. The Point from Switch Board to 3 Plate ceiling rose / holder & three Light Points controlled by one 6 A S.P. Switch / bell push complete. Second & third light point length of up to 6 + 6 Mtr.

Point wiring for light on above false ceiling and concealed in Wall, Panels, etc with min. 25mm H.G. PVC Conduit, accessories like Junction Boxes, Couplers, spacers, Saddles etc. using 3 x 1.5 Sq.mm. [P, N, E] Multistranded Copper Conductor, FRLS PVC insulated, 1100 V grade, Color Coded, ISI marked wires, Modular Version Switch & Accessories. The Point from Switch Board to 3 Plate ceiling rose / holder & Four Light Points controlled by one 6 A S.P. Switch / bell push complete. Second & third & fourth light point length of up to 5 + 5 + 5 Mtr.

Point wiring for Celling fan on above false ceilling and concealed in Wall, Panels, etc with min. 25mm H.G. PVC Conduit, accessories like Junction Boxes, Couplers, spacers, Saddles etc. using 3 x 1.5 Sq.mm. [P, N, E] Multistranded Copper Conductor, FRLS PVC inculated, 1100 V grade, Color Coded, ISI marked wires, with modular version Step fan Regulator Switch & Accessories. The Point from Switch Board to 3 Plate ceiling rose & one Light fan controlled by one 6 A S.P. Switch thro. regulator complete.

Point wiring for Exhaust fan on above faulse ceilling and concealed in Wall, Panels, etc with min. 25mm H.G. PVC Conduit, accessories like Junction Boxes, Couplers, spacers, Saddles etc. using 3 x 1.5 Sq.mm. [P, N, E] Multistranded Copper Conductor, FRLS PVC inculated, 1100 V grade, Color Coded, ISI marked wires, with modular version 3 pin 6A multi sockets with safety shutter, on metallic / Metallic un-breakable conceled box on wall with double ( mounting and cover ) plate type 6 AMP switch, complete.

Point wiring for Plug, with ISI mark 1.1 KV grade PVC insulated copper wire with 2.5 Sq.mm ISI mark PVC insulated copper wire in green color used for earthing in existing PVC conduit on the light or fan board complete with 3 pin 6A modular type socket and 6 Amp modular type Switch erected on original sheet metal / non metallic un-breakable box of light or fan board flush on wall with double (mounting & cover) plate. (Onboard)

Point wiring for Plug, with ISI mark 1.1 KV grade PVC insulated copper wire with 2.5 Sq.mm ISI mark PVC insulated copper wire in green color used for earthing in existing PVC conduit individual on board complete with 3 pin 6A modular type socket and 6 Amp modular type Switch erected on original sheet metal / non metallic un-breakable box of light or fan board flush on wall with double (mounting & cover) plate. (Individual)

Point wiring for UPS Computer Plugs, with ISI mark 1.1 KV grade PVC insulated copper wire with 2.5 Sq.mm ISI mark PVC insulated copper wire in green color used for earthing in existing PVC conduit on the board complete with 2 Nos 3 pin 6A modular type socket and 1 No 16 Amp modular type Switch erected on original sheet metal / non metallic un-breakable box flush on wall / partation complete with double (mounting & cover) plate.

Point wiring for Power Plug, on board with ISI mark 2-4 sq.mm 1.1 KV grade PVC insulated copper wire with 2.5 Sq.mm ISI mark PVC insulated copper wire in green color used for earthing in existing rigid PVC conduit on board for plug complete with 6 pin 6A / 16 A modular type socket and 16 Amp modular type Switch erected on original sheet metal / non metallic un-breakable box flush on wall with double (mounting & cover) plate.

Point wiring for ELV Power Plug, on board with ISI mark 2-2.5 sq.mm 1.1 KV grade PVC insulated copper wire with 1.5 Sq.mm ISI mark PVC insulated copper wire in green color used for earthing in existing rigid PVC conduit on board for plug complete with 2 Nos. 6 pin 6A /16 A modular type socket and 1 No. 16 Amp modular type Switch erected on original sheet metal / non metallic un-breakable box flush on wall with double (mounting & cover) plate.

Wiring for plug on board with Switch socket, copper wiring and earthing as per specification No: WG-PW/SW

Wiring for plug on board with Switch socket concealed type, copper wiring and earthing and with modular accessories as per specification No: WG-PW/CW

Supplying and erecting Ceiling rose / Batten holder / Slanting holder / hanging cord switch / hanging bell push / pendent holder bakelite base 6A. erected on filled polypropylene board or polished double wooden block/ PVC junction box.

Supplying and erecting I.S.I. mark Rigid P.V.C. conduit 25 mm. dia. with necessary accessories 25mm H.G. PVC conduit, with accessories as Junction Boxes, Couplers, on ceiling, Wall, panels etc. for following. a) light board Submains b) 3P 6A Socket Switch computer Points c) 3P 6 / 16A Socket Switch Point d) Cat -6 Cable Point e) Telephone Cable Point. Etc.

Supplying and erecting I.S.I. mark Rigid P.V.C. conduit 32 mm. dia. with necessary accessories 32mm H.G. PVC conduit, with accessories as Junction Boxes, Couplers, on ceiling, Wall, panels etc. for following. a) light board Submains b) 3P 6A Socket Switch computer Points c) 3P 6 / 16A Socket Switch Point d) Cat -6 Cable Point e) Telephone Cable Point. Etc

Supplying and erecting Multistranded Copper Conductor FRLS PVC insulated, Color Coded, 1100 V grade, ISI marked wires, to be laid in item above 2 x 2.5 Sq.mm. [P, N] Wires. + 1 x 1.5 Sq.mm. [E]

Supplying and erecting Multistranded Copper Conductor FRLS PVC insulated, Color Coded, 1100 V grade, ISI marked wires, to be laid in item above 2 x 4 Sq. mm. [P, N] Wires.+ 1 x 2.5 Sq.mm. [E]

Supplying and erecting Multistranded Copper Conductor FRLS PVC insulated, Color Coded, 1100 V grade, ISI marked wires, to be laid in item above 2 x 6 Sq. mm. [P, N] Wires.+ 1 x 4 Sq.mm. [E]

Supplying and erecting Multistranded Copper Conductor FRLS PVC insulated, Color Coded, 1100 V grade, ISI marked wires, to be laid in item above2 x 10 Sq. mm. [P, N] Wires.+ 1 x 6 Sq.mm. [E]

Supplying and Installation Testing Commissioning of movement detectors ( occupancy Sensor )for lightning control with directional movement of 180/ 360 degree detection angle and 1000 VA Fluorescent tube load control.

Supplying and Installation Testing Commissioning of Day Light Sensor for lightning control for 1000 VA Fluorescent tube / LED LIGHT load control.

UNDER FLOOR RACEWAY WORK SITC of raceways of following sizes made out of 1.6 mm thick HDG, 80 Micron Zinc Coating sheet complete with Push type cover for floor & wall drops of below specified thickness with counter sunk type screws Note : The rate quoted shall include earthing for the Wire way trunking with support hardware. (Usage of jumper wire at joining is acceptable) Suitable size of Threaded rod to be used for respective raceways at distance of 1500mm each. Approved Vendor = MK / Legrand 150mm x 38mm GI/Metal raceway with 1.6mm thick cover

Adequete size standard specification JB as above sr.113given raceway

UNDER FLOOR RACEWAY WORK SITC of raceways of following sizes made out of 1.6 mm thick HDG, 80 Micron Zinc Coating sheet complete with Push type cover for floor & wall drops of below specified thickness with counter sunk type screws Note : The rate quoted shall include earthing for the Wire way trunking with support hardware. (Usage of jumper wire at joining is acceptable) Suitable size of Threaded rod to be used for respective raceways at distance of 1500mm each. Approved Vendor = MK / Legrand 100mm x 38mm GI/Metal raceway with 1.6mm thick cover

UNDER FLOOR RACEWAY WORK SITC of raceways of following sizes made out of 1.6 mm thick HDG, 80 Micron Zinc Coating sheet complete with Push type cover for floor & wall drops of below specified thickness with counter sunk type screws Note : The rate quoted shall include earthing for the Wire way trunking with support hardware. (Usage of jumper wire at joining is acceptable) Suitable size of Threaded rod to be used for respective raceways at distance of 1500mm each. Approved Vendor = MK / Legrand 75mm x 38mm GI/Metal raceway with 1.6mm thick cover

UNDER FLOOR RACEWAY WORK SITC of raceways of following sizes made out of 1.6 mm thick HDG, 80 Micron Zinc Coating sheet complete with Push type cover for floor & wall drops of below specified thickness with counter sunk type screws Note : The rate quoted shall include earthing for the Wire way trunking with support hardware. (Usage of jumper wire at joining is acceptable) Suitable size of Threaded rod to be used for respective raceways at distance of 1500mm each. Approved Vendor = MK / Legrand 50mm x 38mm GI/Metal raceway with 1.6mm thick cover

UNDER FLOOR RACEWAY WORK SITC of raceways of following sizes made out of 1.6 mm thick HDG, 80 Micron Zinc Coating sheet complete with Push type cover for floor & wall drops of below specified thickness with counter sunk type screws Note : The rate quoted shall include earthing for the Wire way trunking with support hardware. (Usage of jumper wire at joining is acceptable) Suitable size of Threaded rod to be used for respective raceways at distance of 1500mm each. Approved Vendor = MK / Legrand 225mm x 38mm, 3 Compartment GI/Metal raceway with 1.6mm thick cover

Adequete size standard specification JB as above sr.118 given raceway

UNDER FLOOR RACEWAY WORK SITC of raceways of following sizes made out of 1.6 mm thick HDG, 80 Micron Zinc Coating sheet complete with Push type cover for floor & wall drops of below specified thickness with counter sunk type screws Note : The rate quoted shall include earthing for the Wire way trunking with support hardware. (Usage of jumper wire at joining is acceptable) Suitable size of Threaded rod to be used for respective raceways at distance of 1500mm each. Approved Vendor = MK / Legrand 300mm x 38mm, 3 Compartment GI/Metal raceway with 1.6mm thick cover

Adequete size standard specification JB as above sr.120 given raceway

Supply & Erection of Light Fittings & Fans. 1] Supply erection rate quoted shall be deemed to include all necessary fixing hardware's, suspension brackets, PVC flexible conduit & 2x1.5 sq.mm FRLSH copper PVC insulated wire from ceiling rose / cable Looping box, to the fitting, consumables etc. 2] 1 X 36 W LED Suspended mounted LED Linear light, Efficiency should be 90 to 100 lumen / Watt (600mm suspension system included)

Supply & Erection of Light Fittings & Fans. 1] Supply erection rate quoted shall be deemed to include all necessary fixing hardware's, suspension brackets, PVC flexible conduit & 2x1.5 sq.mm FRLSH copper PVC insulated wire from ceiling rose / cable Looping box, to the fitting, consumables etc. 2] 1 X 15 W LED Surface mounted LED downlight, Efficiency should be 90 to 100 lumen / Watt

Supply & Erection of Light Fittings & Fans. 1] Supply erection rate quoted shall be deemed to include all necessary fixing hardware's, suspension brackets, PVC flexible conduit & 2x1.5 sq.mm FRLSH copper PVC insulated wire from ceiling rose / cable Looping box, to the fitting, consumables etc. 2] 1 X 21 W LED Surface mounted LED downlight, Efficiency should be 90 to 100 lumen / Watt

Supply & Erection of Light Fittings & Fans. 1] Supply erection rate quoted shall be deemed to include all necessary fixing hardware's, suspension brackets, PVC flexible conduit & 2x1.5 sq.mm FRLSH copper PVC insulated wire from ceiling rose / cable Looping box, to the fitting, consumables etc. 2] Supplying and erecting T5 28 W energy efficient fluorescent tube.

Supply & Erection of Light Fittings & Fans. 1] Supply erection rate quoted shall be deemed to include all necessary fixing hardware's, suspension brackets, PVC flexible conduit & 2x1.5 sq.mm FRLSH copper PVC insulated wire from ceiling rose / cable Looping box, to the fitting, consumables etc. 2] Supplying & erecting decorative pre-wired box type fitting/batten suitable for 4 feet, T8 LED tube light (excluding tube light).

Supply & Erection of Light Fittings & Fans. 1] Supply erection rate quoted shall be deemed to include all necessary fixing hardware's, suspension brackets, PVC flexible conduit & 2x1.5 sq.mm FRLSH copper PVC insulated wire from ceiling rose / cable Looping box, to the fitting, consumables etc. 2] Supplying and erecting LED square / circular 16 to 20W down lighter having pressure die-cast aluminium housing, opal translucent cover, mounting arrangement with board for surface type or spring loaded mounting clips for flush type complete.

Supply & Erection of Light Fittings & Fans. 1] Supply erection rate quoted shall be deemed to include all necessary fixing hardware's, suspension brackets, PVC flexible conduit & 2x1.5 sq.mm FRLSH copper PVC insulated wire from ceiling rose / cable Looping box, to the fitting, consumables etc. 2] Supplying and erecting LED Mirror Light with integrated driver including 14W to 18W lamp with polycarbonate housing and opal diffuser to be fixed above mirror or as required on clamps complete.

Supply & Erection of Light Fittings & Fans. 1] Supply erection rate quoted shall be deemed to include all necessary fixing hardware's, suspension brackets, PVC flexible conduit & 2x1.5 sq.mm FRLSH copper PVC insulated wire from ceiling rose / cable Looping box, to the fitting, consumables etc. 2] Supplying and erecting square shaped CRCA /die-cast aluminium powder coated housing LED panel light (slim edge-lit) 600x600mm suitable for 36 W-40W with provision for plane front frame with translucent cover fixed to the housing complete.

Supply & Erection of Light Fittings & Fans. 1] Supply erection rate quoted shall be deemed to include all necessary fixing hardware's, suspension brackets, PVC flexible conduit & 2x1.5 sq.mm FRLSH copper PVC insulated wire from ceiling rose / cable Looping box, to the fitting, consumables etc. 2] Supplying and erecting LED flexible strip light 5m length upto 25W conforming IP 65 of any colour with driver complete.

Supply & Erection of Light Fittings & Fans. 1] Supply erection rate quoted shall be deemed to include all necessary fixing hardware's, suspension brackets, PVC flexible conduit & 2x1.5 sq.mm FRLSH copper PVC insulated wire from ceiling rose / cable Looping box, to the fitting, consumables etc. 2] Supplying and erecting CRCA /die-cast aluminium powder coated housing LED panel light (slim edge-lit) square / round shape suitable for 19 to 24 W with provision for plane front frame with translucent cover fixed to the housing complete.

Supply & Erection of Light Fittings & Fans. 1] Supply erection rate quoted shall be deemed to include all necessary fixing hardware's, suspension brackets, PVC flexible conduit & 2x2.5 sq.mm FRLSH copper PVC insulated wire from ceiling rose / cable Looping box, to the fitting, consumables etc. 2] Supplying and erecting LED Flood light fitting of 30-40W, including lamp, with PF > 0.95,class IP 65 and above class IP 65 and above housing of pressure die cast aluminium alloy and heat sink extruded aluminium complete per specification No FGODF/FLS-2

Supply & Erection of Light Fittings & Fans. 1] Supplying and erecting five star rated energy saving Ceiling fan 230 V A.C. 50 cycles 1200 mm complete erected in position as per specification no. FG-FN/CF with anchor type fastener fan hook

Supply & Erection of Light Fittings & Fans. 1] Supplying and erecting regular/ standard model ceiling fan of 900/1050 mm. sweep complete erected in position as per specification no. FG-FN/CF with anchor type fastener fan hook

Supply & Erection of Light Fittings & Fans. 1] Supplying and erecting exhaust fan medium duty 230 V A.C. 50 cycles 225 mm. 1400 RPM with condenser complete erected in position with necessary materials. Fan motor with moisture proof treatment and ‘E’ class insulation.

Supplying and erecting HMS PVC conduit 25 mm dia. with PVC accessories on wall /ceiling as per specification No: WG-MA/CON.

Supplying and erecting PVC box trunking of size 75x50 mm. with accessories on wall/ceiling as per specification No: WG-MA/BOX.

Supplying and erecting PVC box trunking of size 100x50 mm. with accessories on wall/ceiling as per specification No: WGMA/ BOX

Supplying and erecting PVC box trunking of size 50x50 mm. with accessories on wall/ceiling as per specification No: WG-MA/BOX.

Supplying & erecting mains with 4x16 sq.mm FRLSH copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places as per specification No: WGMA/BW

Supplying & erecting mains with 4x4 sq.mm. FRLSH copper wire, in 16gauge 25 mm dia. Rigid Steel conduit, with continuous GI earth wire of 2.5 sq.mm as per specification No:WG-MA/MC

Supplying & erecting mains with 4x6 sq.mm. FRLSH copper wire, in 16gauge 25 mm dia. rigid steel conduit, with continuous GI earth wire of 4sq.mm. as per specification No: WG-MA/MC.

Supplying & erecting mains with 4x10 sq.mm. FRLSH copper wire, in 16gauge 32 mm dia. rigid steel conduit, with continuous GI earth wire of 6sq.mm. as per specification No: WG-MA/MC.

Supplying and erecting ISI mark modular type T.V. socket single outlet, duly erected on provided plate and box with wiring connections complete.

Supplying and erecting ISI mark modular type blanking plate one module, duly erected on provided plate & box.

Supplying and erecting unbreakable concealed type modular switch box with double mounting plate for 8 module duly erected flush to wall with required chiselling and finishing with cement mortar / POP as per required to match the background.

Supplying and erecting unbreakable concealed type modular switch box with double mounting plate for 12 module duly erected flush to wall with required chiselling and finishing with cement mortar / POP as per required to match the background.

Supplying LED concealed type foot / step light with aluminium body for indoor/outdoor application suitable for upto 4W-6W LED including driver and erecting by making necessary arrangement/recess in wall to make it flush with surface.

Supplying and erecting decorative oval bulk head edge-lit 10W LED luminaire comprising of high brightness LED Fitting on provided PVC block / wooden board.

Supplying & erecting aviation obstruction light consisting of yellow painted die-cast aluminium alloy housing with integral LED aviation light comprising of aluminium housing with polycarbonate enclosure complete

Supply & Erection of Light Fittings & Fans. 1] Supplying and erecting ‘B’ grade G.I. pipe / M.S. pipe down rod duly painted for fan complete erected with PVC three core flexible cable 1 sq. mm copper PVC wire.

Supplying and erecting PVC insulated PVC round sheathed 2.5 sq.mm (50 no. x 0.25 mm dia.) 3 core flexible multi stranded copper Industrial cable for voltage grade up to 1.1 kV

SITC Level-3 protected Lightning protection system accordigaly IS/IEC: 62305 all Part,

Supply, Installation, Testing & Commissioning of Microprocessor based 2 loop capacity , Networkable Analogue Addressable type fire alarm control panel with Display and Fully functional QWERTY type keypad. The panel shall be equipped with 10% spare capacity with each loop having a maximum loading of 125 detectors and 125 devices in one loop.

S/I/T/C Of Addressable MultiSensor Detector (BFC) & (AFC) With Required Accessories

S/I/T/C Of Addressable Rate of Rise Thermal Detector With Required Accessories.

Supplying, installing, testing and commissioning four wire conventionally single ended reflected type beam smoke detector with 8 “ receiver . The range of smoke detector is max 164 feet.

S/I/T/C Of Addressable Pull Station

S/I/T/C of Addressable strobe cum sounder with Control Module in a GI Juction Box.

S/I/T/C Of Addressable Control Modules With Required Accessories - For PA Interface

S/I/T/C Of Addressable Monitor Modules With Required Accessories - For Fire Fighting Inteface

S/I/T/C Of Addressable Fault Isolater Modules With Required Accessories.

Supplying, installing, testing and commissioning FR, XLPE armoured cable 2 core 1.5 sq.mm. copper conductor complete erected on wall/ ceiling complete as per specification no. CBLT/CU

S/I/T/C of 6W Ceiling Mounting Speaker with necessary mounting hardware & acceessories

S/I/T/C Of 480W Power Amplifier with required Accessories.

S/I/T/C Of 6 Zone Controller with required Accessories.

S/I/T/C Of 19" Rack Mountable Music Source WithFM/DVD Player Complete With Interconnecting Cables.

S/I/T/C of Supplying, erecting, testing and commissioning of 1.5 sq mm speaker wire complete.

Supplying & laying HMS PVC conduit 25 mm dia with necessary accessories in RCC work/false ceiling/false flooring as per specification No. WG-MA/CC

Supply, Installation, Testing and Commissioning of 1080P IP Network IR Dome Camera, 1/2.8" 2 MP progressive scan CMOS, triple stream, H.264, 2.8 mm lens, F2.0, TDN, 120dB True WDR, Min Illumination 0.001Lux @f/2.0, B/W : 0Lux @f/2.0(IR on), Audio Mic In, PoE, 24VAC/12VDC, 15m IR distance, Inbuilt SD Card support upto 128 GB IP66, IK10 vandal proof, Having Operating temp range : –20°C to 60° C. Certifications: ONVIF compliant, UL, CE, FCC and & RoHS compliant.

Supply Installation & commissining of Outdoor Type Bullet Camera with 1/2.7" 2 MP progressive CMOS, 1080P high definition , 2.7-12 mm motorized focus zoom lens, Min Triple Stream Support, Inbuilt Smart IR LED with 60m Distance, 0.01 lux color/0 lux with IR LEDs on,H.264 high profile, True WDR min 120 dB, True Day/Night), 3DNR and Built in Power over Ethernet (PoE), Min 128 GB Micro SD Card Storage support, ONVIF compliant ,Waterproof (IP66) vandal resistant camera housing, Working temp--20°C to 60°C, ONVIF compliant, UL, CE, FCC and & RoHS compliant.

16 Channel NVR with 4 SATA 32 Channel NVR With 1080p Realtime Live View H.265/H.264 MJPEG dual codec decoding Up to 12 MP resolution preview & playback Max 320 Mbps incoming bandwidth support 4 SATA HDDs up to 32TB, Supports fisheye videode-warping in local and web user interface,Supports visual or auditory notifications(a flashing light, bell,or siren) ONVIF compliant, UL, CE, FCC and & RoHS compliant.

S/I/T/C of 4 TB Harddisk.

Supply Installation & commissining of 42" LED Monitor

Supplying & installing UTP networking cat-6 cable suitable for LAN / WAN Computer net-working as per specification No. WG-COC/NC

Supplying & laying HMS PVC conduit 25 mm dia with necessary accessories in RCC work/false ceiling/false flooring as per specification No. WG-MA/CC.

Supply, installation, testing and commissioning of IP Based 2 Door Controller with Enclosure & Power Supply.

Supply, installation, testing and commissioning of Card Reader.

Supply, installation, testing and commissioning of Exit Switch.

Supply, Installation, Testing and Commissioning of EM Lock.

Supply, Installation, Testing and Commissioning of 8C - 0.75 Sqmm CU Shielded Flexible Cable .

Supply, Installation, Testing and Commissioning of 4C -0.75 Sqmm CU Shielded Flexible Cable .

Supplying & laying HMS PVC conduit 25 mm dia with necessary accessories in RCC work/false ceiling/false flooring as per specification No. WG-MA/CC.

Supply, Installation, Testing and Commissioning of Up gradation users Data base Management, Real-time alarm/event monitoring , Elevator control, Anti-pass back processing ,card holder, log in -log out ,card holder history report etc. using Access control management software

Supply, Installation, Testing and Commissioning of Biometric Fingerscan Readers Including Back Box.

Supply, Installation, Testing and Commissioning of Prox II Cards

Supply, Installation, Testing and Commissioning of Printing Charges

Supplying and fixing tool-less Information Outlet (Ethernet) flush/surface type in provided modular box as per specification no. WG-NAS/IO - For Data

S/I/T/C OF DUAL 110 STYLE -FACE PLATE - SHUTTER TYPE

S/I/T/C OF CAT-6, 7FT MOUNTING CORD FOR DATA - ( BOTH SIDE)

Supplying and fixing 24 port patch panel with tool-lesskeystone jacks in provided U Rack complete as per specification no. WG-NAS/PP

Supply ,Installation, Testing and Commissioning of 24 RJ-45 autosensing 10/100/1000 ports 2 x Gigabit SFP Slots with L2 feature.

Supplying and fixing 48 port patch panel with tool-lesskeystone jacks in provided U Rack complete as per specification

Supply ,Installation, Testing and Commissioning of 48 RJ-45 autosensing 10/100/1000 ports 2 x Gigabit SFP Slots with L2 feature.

Supply , Installation, Testing and Commissioning of L3 networking switch 24 ports supporting 10/100/1000BTx, min 4 shared minigibic/SFP, 2 nos 10G XFP ports including singlemode transceivers in LC terminations, with in built dual redundant power supply.

Supply , Installation, Testing and Commissioning of Server and Storage for 150 Users.

Supplying & installing UTP networking cat-6 cable suitable for Voice as per specification No. WG-COC/NC

Supplying and fixing 42 U floor mount server Rack(Dimension-DxW – 800x1000 x2070mm) as per specification No. WG-NAS/RAK

SITC of 9U Rack

Supplying and fixing tool-less Information Outlet (Ethernet) flush/surface type in provided modular box as per specification no. WG-NAS/IO - For Voice

Supply , Installation, Testing and Commissioning of EPABX System for 150 Users.

Supplying & installing UTP networking cat-6 cable suitable for Voice as per specification No. WG-COC/NC

Supplying & erecting jelly filled armoured telephone coppercable 50 pair with 0.5 mm dia. laid in provided trench as perspecification No. WG-TW

Supplying, erecting & commissioning Main Distribution Frame (MDF) Box 50x50 pairs as per specification No. WG-TW

Supplying, erecting & commissioning MDF Box 300 x 300 pairs as per specification No. WG-TW

Supplying, installing, testing & commissioning push buttontelephone instrument desk top/wall mount with caller ID unit as per specification complete.

Supplying, installing, testing & commissioning approved type Digital key telephone / IP telephone instrument as per specification complete.

Jockey Pump Supply, Installation, Testing & commissioning of Electrical driven Jockey pump suitable for automatic/ manual operation consisting of the following as under: vertically mounted pump running at 2900 r.p.m. capable of delivering 180 LPM against a total head of 65 meters complete with tail pieces for proper connection to suction and delivery line. Squirrel cage, TEFC induction motor suitable for 415 + 10% 3 phase 50 Hz A.C. supply & of approximate 7.5 kw for the above pump running at 2900 r.p.m. (as per specifications). Bed plate of requisite strength manufactured out of M.S. channel of suitable size of ISMC including with suitable no. of cushy foot mounting below ISMC channel with suitable C.C. foundation. All necessary accesssories like pressure guages, Pressure switches with valve and required ratings and including control panel. All necessary earthing arrangement with G.I.strip / wires including all necessary fixing accessories and connections as per specifications. 25x3mm GI strip, 8 SWG GI wire

Hydrant Fire Pump Supply, Installation, Testing & commissioning of Electrical driven Hydrant fire pump suitable for automatic/ manual operation consisting of the following as under: Pump - End Suction Fire Pump as per approval requirement of UL / FM having a capacity of 2280 LPM at 65 meter head. The pump shall radially split top center line discharge, self venting casing.The pump construction shall be of cast iron. The shaft shall be fitted with stainless steel sleeves and be supported by two back to back thrust ball bearings and one radial roller bearing. the back pull out design allow the complete rotating assembly to be removed without disturbing the casing piping connection Electric Motor- Squirrel cage, TEFC induction motor suitable for 415 volt, 3-phase 50 Hz A.C. supply and of approximate 55 KW for the above pump running at 1500 r.p.m. confirming to IS : 325-1978. Fittings - The pump shall be supplied with combination suction and discharge gauge 3 1/2" dial type with 1/4" cock and lever handle.Mounting & Testing - The Fire Pump shall be factory mounted and aligned with electric motor on common structural base.The fire pump shall be hydraulically tested to a pressure recommended by UL /FM. It shall be subjected to a performance test at rated speed. A certified test curve shall be supplied with the pump. All accesssories like pressure guages, Pressure switches with valve and required ratings. All necessary earthing arrangement with G.I.strip / wires including all necessary fixing accessories and connections as per specifications. 25x3mm GI strip. 8 SWG GI wire

Supply, installation, testing and commissioning of C.I Y-type strainer as per I.S specification with necessary flange, nuts, bolts and washer etc. complete as required for suction side of following diameter. 40 mm dia. Y' c.i strainer of PN 16

Supply, installation, testing and commissioning of C.I Y-type strainer as per I.S specification with necessary flange, nuts, bolts and washer etc. complete as required for suction side of following diameter. 150 mm dia. Y' cast iron suction strainer of PN10 rating ( at terrace)

Supply, installation, testing and commissioning of C.I Y-type strainer as per I.S specification with necessary flange, nuts, bolts and washer etc. complete as required for suction side of following diameter. 200 mm dia. Y' c.i strainer of PN 10

Supply, installation, testing and commissioning of flexible connectors of following diameter as per I.S specification with necessary flange, nuts, bolts and washer etc. for pumps complete as required. 65 mm dia flexible connectors PN10

Supply, installation, testing and commissioning of flexible connectors of following diameter as per I.S specification with necessary flange, nuts, bolts and washer etc. for pumps complete as required. 50 mm dia flexible connectors PN16

Supply, installation, testing and commissioning of flexible connectors of following diameter as per I.S specification with necessary flange, nuts, bolts and washer etc. for pumps complete as required. 150 mm dia flanged flexile connector PN16

Supply, installation, testing and commissioning of butterfly valves as per I.S 13095 of PN16 with necessary flange, nuts, bolts and washer etc. for isolation of pumps, internal, wet risers, external hydrant, sprinkler supply & test pipes from discharge header. 50 mm dia butterfly valve PN16

Supply, installation, testing and commissioning of butterfly valves as per I.S 13095 of PN16 with necessary flange, nuts, bolts and washer etc. for isolation of pumps, internal, wet risers, external hydrant, sprinkler supply & test pipes from discharge header. 65 mm dia butterfly valve PN10

Supply, installation, testing and commissioning of butterfly valves as per I.S 13095 of PN16 with necessary flange, nuts, bolts and washer etc. for isolation of pumps, internal, wet risers, external hydrant, sprinkler supply & test pipes from discharge header. 150 mm dia PN 16

Supply, installation, testing and commissioning of butterfly valves as per I.S 13095 of PN16 with necessary flange, nuts, bolts and washer etc. for isolation of pumps, internal, wet risers, external hydrant, sprinkler supply & test pipes from discharge header. 200 mm dia butterfly valve PN 10 (Gear operated)

Supply, installation, testing and commissioning of Globe valves as per I.S specification of PN16 with necessary flange, nuts, bolts and washer etc. from discharge header. 80 mm dia

Supply, installation, testing and commissioning of check valve (wafer type) of following diameter as per I.S specification of PN16 with necessary flange, nuts, bolts and washer etc. from discharge header. 50 mm dia

Supply, installation, testing and commissioning of check valve (wafer type) of following diameter as per I.S specification of PN16 with necessary flange, nuts, bolts and washer etc. from discharge header. 150 mm dia

Necessary inter-connecting heavy grade IS marked galvanised iron pipe and fittings complete as required according to the recommendation of pump manufacturer and as shown on drawings of 25 mm dia with desired shade of two or more coats enamel paint .

Necessary inter-connecting heavy grade IS marked galvanised iron pipe and fittings complete as required according to the recommendation of pump manufacturer and as shown on drawings of 32 mm dia with desired shade of two or more coats enamel paint .

Necessary inter-connecting heavy grade IS marked galvanised iron pipe and fittings complete as required according to the recommendation of pump manufacturer and as shown on drawings of 40 mm dia with desired shade of two or more coats enamel paint .

Necessary inter-connecting heavy grade IS marked galvanised iron pipe and fittings complete as required according to the recommendation of pump manufacturer and as shown on drawings. of 50 mm dia with desired shade of two or more coats enamel paint.

Necessary inter-connecting heavy grade IS marked galvanised iron pipe and fittings complete as required according to the recommendation of pump manufacturer and as shown on drawings. of 65 mm dia with desired shade of two or more coats enamel paint.

Necessary inter-connecting heavy grade IS marked galvanised iron pipe and fittings complete as required according to the recommendation of pump manufacturer and as shown on drawings. of 80 mm dia with desired shade of two or more coats enamel paint .

Necessary inter-connecting heavy grade IS marked galvanised iron pipe and fittings complete as required according to the recommendation of pump manufacturer and as shown on drawings. of 100 mm dia with desired shade of two or more coats enamel paint .

Necessary inter-connecting heavy grade IS marked galvanised iron pipe and fittings complete as required and shown on drawings of 150mm dia with desired shade of two or more coats enamel paint .

Necessary inter-connecting heavy grade IS marked galvanised iron pipe and fittings complete as required and shown on drawing of 200mm dia with desired shade of two or more coats enamel paint .

Supplying of (vertically) mounted M.S.fabricated pressure vessels of made from required thickness suitable for test pressure of 16 kg/cm2 (minimum 8 mm) M.S. Plate as per I.S. 2062, 300mm in diameter and 1.2 Meter high shell with dished ends at top and flat bottom with floor mounting supports including 25mm outlet, inlet and Branch for Pressure gauge complete. The interior of the tank surface shall be coated with suitably graded Non-Toxic epoxy coating after necessary surface treatment by sand blasting, etc. to prevent corrosion of the vessel and shall be painted externally with 3 coats of enamel paint over one coat of Zinc Chromate primer including all accessories for complete installation as required.

Providing & fixing M.S class `B’ diesel pump exhaust pipe including all fittings, clamps/structural steel supports. The pipe shall be provided with two layers of 6mm thick supper cera insulation with complete accesories as required. 100 mm dia

Supply, installation of end flanges of below mentioned diameter as per specifications, complete as required. 200 mm dia

Supply, installation, testing and commissioning of ball valves as per I.S code of PN16 with necessary fittings, complete as required. 40 mm dia

Supply, installation, testing and commissioning of ball valves as per I.S code of PN16 with necessary fittings, complete as required. 25 mm dia

Supply, installation, testing and commissioning of Gate valves as per I.S code of PN16 with necessary fittings, complete as required. 40 mm dia

Supply, installation, testing and commissioning of 20 mm dia air release valve as per I.S code with necessary fittings, complete as required.

Supply, installation, testing and commissioning of Pressure switch with necessary fittings, complete as required.

Supply, installation, testing and commissioning of Pressure gauge 150mm dial with necessary fittings, complete as required.

Providing and fixing 800 mm long galvanised iron puddle flanges fabricated out of 6 mm thick M.S. plates of suitable size properly fixed in walls & top slab of tanks of following diameter. 50 mm

Providing and fixing 800 mm long galvanised iron puddle flanges fabricated out of 6 mm thick M.S. plates of suitable size properly fixed in walls & top slab of tanks of following diameter. 65 mm

Providing and fixing 800 mm long galvanised iron puddle flanges fabricated out of 6 mm thick M.S. plates of suitable size properly fixed in walls & top slab of tanks of following diameter. 80 mm

Providing and fixing 800 mm long galvanised iron puddle flanges fabricated out of 6 mm thick M.S. plates of suitable size properly fixed in walls & top slab of tanks of following diameter. 100 mm

Providing and fixing 800 mm long galvanised iron puddle flanges fabricated out of 6 mm thick M.S. plates of suitable size properly fixed in walls & top slab of tanks of following diameter. 150 mm

Providing and fixing 800 mm long galvanised iron puddle flanges fabricated out of 6 mm thick M.S. plates of suitable size properly fixed in walls & top slab of tanks of following diameter. 200 mm

Supply, installation, testing and commissioning of 600mm dia C I man hole cover of light duty, with necessary hinge, leave and necessary frame etc. as per the approval of engineer for UGT and OHT.

Design, fabrication, assembling, wiring, supply installation, testing and commissioning of Fire Fighting distribution panel fabricated out of 14 gauge CRCA sheet steel in cubicle compartmentalized, free standing floor mounted, dust and vermin proof with reinforcement of suitable size angle iron, channel, `T’ sections and / or flats wherever necessary. 3 mm thick cable gland plates shall be provided on top/bottom as required. Panels shall be treated with all anti corrosive process before powder coating as per specifications and final approved shade no. 536 as per IS:5. bus bars shall be Electrolytic Grade Aluminium (Grade E91E of IS:5082) The busbars shall be covered with heat shrinkable insulation Sleeves and supported by non hygroscopic insulated supports such as shall be capable of withstanding 50 KA RMS symmetrical current for 1 sec. GI Earth bus of 25 mm x 5 mm shall be run along entire length of board with 2 earth terminals. The entire panel shall be given a primer coat of red lead after degreasing and phosphating and 2 coats of final paint of approved shade. Suitable engraved panels shall be fixed at the panel for all switches, instruments, push button, indicating lamps, etc., 2 Nos. earthing terminals shall be provided for all distribution panels. Panels shall be suitable for 415V, 3 phase, 4 wire, 50 HZ supply system. Lifting hooks shall also be provided in case of large panels. Approval shall be taken for each panel in the form of shop drawings. Galvanized hardware with zinc passivation shall be used in fabrication of panels. Fire Panel for mentioned Fire Pump Sets of suitable size as per HP/ KW of all fire Pumps with Cable Tray, suitable incomer, metering protection, busbar, outgoing with spares. The panel should have Auto Change over to Engine driven pump in case of power failure also it can be integrated with Fire-alarm panel. Incomer - 200 A TP+N, 36 kA MCCB with over current and short circuit protection - 1 No. (TM Released) Metering & Protection. 200/5A, 15VA, Cl. 1 Current Transformer - 1 Sets. RYB LED Type phase indicating lamps with 2A TP MCB - 1 Set. 0-500V AC, Digital Voltmeter - 1 set. 0-200A AC, Digital Ammeter - 1 set. Class B+C Type SPD with Fuse Protection - 1 No. (Equivalent to OBO). Busbar-200 A TPN, 36kA, Aluminium Bus Bars of suitable length. Bus bars shall be colour coded and insulated by Heat Shrink Sleeves. The current density of Bus bar shall be 1 sq.mm. / amp - 1 set. Outgoing - 55 kW Soft Stater - 1 Nos., 7.5 kW Soft Stater - 1 No., 200 A TP+N, 36kA, MCCB with over current and short circuit protection - 2 Nos. (TM Released), 32 A TP+N, 36kA, MCCB with over current and short circuit protection - 2 No. (TM Released). Contractor need to refer Master SLD & Respective specification for further clarification.

Supply, installation, testing and commissioning of 50 mm dia float valve with necessary fittings and support and accessories.

Supply installation and testing of water level indicator consisting of 100 mm dia transparent pvc pipe with necessary supports, brackets and stainless steel clamps,forged brass ball valves as per the approval and instructions of engineer

Supply, installation, testing and commissioning 50 mm dia tanks vent connection with stainless steel mosquito proof mesh of approved quality sandwiched between flanges with necessary welding and bolts, washers and gasket etc. as per the approval of the engineer.

Providing and fixing 150mm dia, Installation control valve assembly comprising of vertical wet alarm valve, 150mm dia, C.I sluice valve, hydraulic alarm motor & gong, 15mm dia. test valve, 50mm dia.drain valve and all necessary trimming connection including 2 Nos. pressure gauge as per manufacturer’s catalogue including special arrangement/set up box/ limit switch with the signals to be brought to the annunciator panel in the control room.

Providing, fixing, testing & commissioning of resilient rubber lined single arch vibration eliminators suitable for raw water up to 45 deg. C temperatur and test pressure 14 Kg/cm2 of 150 mm dia complete as required.

Providing, laying, fixing, testing (Heavy Duty) G.I 'C' Class pipe conforming to IS:1239 pipe including all fittings like bends, elbow, tees, coupling and also anchor fastener etc. complete with brick pedestal supporting arrangement below pipe complete in all respect.(burried pipe with desired shade of two or more coats enamel paint as per specification ) 80 mm dia

Providing, laying, fixing, testing (Heavy Duty) G.I 'C' Class pipe conforming to IS:1239 pipe including all fittings like bends, elbow, tees, coupling and also anchor fastener etc. complete with brick pedestal supporting arrangement below pipe complete in all respect.(burried pipe with desired shade of two or more coats enamel paint as per specification ) 150 mm dia

Providing & fixing fire hydrant single headed landing valve with 80 mm N.B. flanged inlet, brass spindle controlled 63 mm dia female instantaneous outlet type. SS coupling, blank cap, suitable orifice plate, chain, twist release type lug & all accessories Conforming to IS standards. Including fixing with anchor fastner and flanged tapping from wet riser and providing pressure gauge with gun metal ball valve complete as required. Landing valves shall be of IS: 5290 specification and approved make.

Providing and fixing of weather proof hose cabinet fabricated from 16g MS sheet with full glass door and locking arrangement, suitable to accommodate 2 nos. 15m long 63 mm dia hose, and one no. branch pipe with nozzle. The cabinet shall be painted with two coats of 'Fire red' enamel paint over two coats of Zinc Chromate primer including "Fire Hose" written on front including suitably mounted on a raised masonry platform as required. (Approx. 0.75m x 0.6m x 0.25m). For External Hydrant

Providing & fixing 63 mm dia 15 mtr. long Reinforced rubber lined hose pipe including gunmetal male & female instantaneous type coupling machine wound with G.I. Wire complete in all respects. Hose shall permaline hose and coupling conforming to IS:636

Providing & fixing Gun-metal 63mm dia. Short branch pipes with 20 mm dia. Nozzles, ISI Marked (IS:903) as per approved make.

Providing and fixing of First aid fire hose reel wall mounting swinging type complete with drum, bracket, 25 mm dia ball valve and 20 mm dia x 30 meter long high pressure hose reel tubing as per IS 444 & ISI marked with gun metal shutoff nozzle having 5mm dia orifice. The hose reel shall strictly conform IS: 884-1985. It shall also be provided with 25 mm dia installation and isolation valve.

Providing and fixing gunmetal fire brigade inlet connection to fire tank with in built BFV nad Non return valve of 150mm dia on vertical pipes with 4 nos. 63mm dia instantaneous type male couplings with 150mm dia flanged outlet complete with bolts, nuts, and rubber insertions as required and as per IS:904-1983.

Providing & fixing gun-metal fire brigade suction hose coupling (draw-out connection) with female coupling as per IS: 902-1974 complete with 150 mm dia GI suction pipe and 150 mm dia foot valve (to be connected to static tank). (GI pipe to be paid separately through appropriate item while cost of foot valve to be included).

Providing and fixing gunmetal fire brigade Siamese connection Hydrant ring main with NRV & BFV of 150mm dia on vertical pipes with 4 nos. 63mm dia instantaneous type male couplings with 150mm dia flanged outlet complete with bolts, nuts, and rubber insertions as required and as per IS:904-1983.

Providing and fixing 15mm dia, Quartzoid bulb type G.M. Sprinkler Head UL Approved chrome plated complete with SS plate (Rosette). Set to operate at 68OC - Upright

Providing and fixing 15mm dia, Quartzoid bulb type G.M. Sprinkler Head UL Approved chrome plated complete with SS plate (Rosette). Set to operate at 68OC - Pendent

Providing and fixing 15mm dia, Quartzoid bulb type G.M. Sprinkler Head UL Approved chrome plated complete with SS plate (Rosette). Set to operate at 68OC - Sidewall

Providing and fixing 15mm dia, Quartzoid bulb type G.M. Sprinkler Head UL Approved chrome plated complete with SS plate (Rosette). Set to operate at 68°C- Extended coverage pendent

Providing, fixing, testing and commissioning 25mm diameter inspecting and testing assembly with isolation valve, sight glass bypass valve and connected to 50mm drain line and flow Switches suitable for fixing in 50mm to 150mm dia, complete with all accessories to provide Indication in annunciator panel. (cabling will be part of Fire Alarm System)

Providing and fixing of corrugated stainless steel (AISI 304) un braided flexible sprinkler pipe drops of 25 mm dia of following length and maximum working pressure of 175 psi with all accessories and clamps as required. 1.0 m length

Providing and fixing A, B, C type powder Fire Extinguishers complete with all accessories as per manufacturers specifications with initial fill . 6 Kgs.

Supply & installation ISI marked (IS:2878) Fire Extinguisher, Carbon-di-oxide type capacity 4.6 Kgs.flat base including valve, discharge hose of not less than 10mm dia., 1M long and complete in all respects including initial fill with CO2 gas conforming to IS:307-1966 filled to a filling rate of not more than 0.667 and wall suspension bracket.

Supply & installation ISI marked (IS:2878) sand bucket with all required accessories and support.

Supply and installation of fire man's axe.

Clearing and grubbing road land including uprooting rank vegetation, grass, bushes, shrubs, saplings and trees girth up to 300 mm, removalof stumps of trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to be used or auctioned up to a lead of 1000 metres including removal and disposal of top organic soil not exceeding 150 mm in thickness.

Supplying hard murum/ kankar at the road site, including conveying and stacking complete.

Spreading hard murum/ soft murrum/ gravel or kankar for side width complete

Compacting the hard murum side widths including laying in layers on each side with vibratory roller including artificial watering etc. complete.

Providing and laying wedge shear elemental layer (WSEL) by using rubble stone of size 15 to 20 cm thick in single layer of 230 mm including packing the same with 20 mm to 40 mm thick aggregates ( normal size) and using stone powder of 40 mm to 50 mm thick on surface and watering & compacting by vibratory roller confirming layer thickness of minimum 200 mm and as directed by Engineer - in - charge etc complete.

Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing to proper grade and camber, applying and brooming requisite type of screening/ binding Materials to fill up the interstices of coarse aggregate, watering and compacting with Intelligent Compactor with compaction analyzer and V-Sat attachment. to the required density. Grading II (Using Screening Type B (11.2 mm) Aggregate)

Providing and Laying M60 grade cement concrete of approved mix design with avg. Flextural strength of 4.4 MPa in 3 days from R.M.C. plant incld. use of micro silica/alcofine, approved make super plastiser and retarder, fibriliated 100 % virgin polypropylene fibres, fly ash and transported by transit mixer and placing at work site. Compacting, finishing, initial curing by approved curing compound/ contractors water and tarring the sides of slab with hot bitumen as specified and as directed (w/c ratio 0.28 max.). (vatta for curing will be paid separately) for Ultra thin White Topping (UTWT) pavement. etc completed.

Providing and fixing in position TMT FE 500, 32 mm dia dowel bars precoated with anticorrosive epoxy paint of required Dia. 60 cms. Long and at 30.00 cm. C/C and wherever directed including handling, straightening, necessary cutting supported by TMT FE 500, chairs with proper alignment by using properly designed assembly of Bulkheads lubricating half length with bituminous paint as directed etc. complete.

Providing and fixing in position TMT FE 500, tie bars precoated with anticorrosive epoxy paint of 12 mm dia. 70 cms.long and at 30.00 cm. C/C and wherever directed including handling, straightening pping with paper of approved quality for half length, necessary cutting, handling, straightening , supported by assembly of TMT FE 500, chairs with proper alignment etc. complete

Cutting transverse contraction joints 3 to 4 mm wide and depth 60mm. .in concrete slab using concrete cutting machine with diamond studded saw within 48 hours of casting of bay / slab etc. complete including subsequent widening of the groove 8 to 10 mm. wide at top having depth of 15 mm. as directed by Engineer incharge.

Providing and Placing 5mm thick Thermocole or equivalent material in dummy and construction joints immdtly after cutting of joints and removing the same before dressing of dummy and construction joint as directed etc. complt.

Providing and construction of cement vatta in C.M.1:10 at 0.6 M X 0.6 M c/c admeasuring 0.09 meter at bottom, 0.04 m at top and 0.075 m deep and maintaining the same throughout 7 days curing period and removing the same material as directed.

Sealing of M-35 & above new C.C. pavement dummy, transverse, longitudinal joints with hot rubberised sealing compound confirming to IS 1834-1984 after proper cleaning with compressed air, applying required primer & providing a layer of lime powder over hot sealing compound as directed. Sealing 5mm - 6 mm wide & avg. depth of 40 mm transverse & longitudinal joints

Road Marking with Hot Applied Thermoplastic Compound with Reflectorizing Glass Beads on Bituminous Surface- Providing and laying of hot applied thermoplastic compound 2.5 mm thick including reflectorizing glass beads @ 250 gms per sqm area, thickness of 2.5 mm is exclusive of surface applied glass beads as per IRC:35 .The finished surface to be level, uniform and free from streaks and holes.complete.

Providing and fixing factory made Hydraulically pressed Mechanically vibrated and compacted precast inter locking cement concrete paving blocks 80MM thick in M-40 grade of approved size and shape for City streets, small /medium market roads,low volume roads, utility cuts on arterial roads etc. as specified and as per IS 15658:2006 including cost of all materials, manufacturing, curing, transportation of blocks to work site including loading, unloading and stacking as directed, laying paving blocks in position over prepared bed of natural sand / crushed sand of 50 mm thickness including necessary excavation in all stratas, spreading blindge of fine sand over the prepared bed, compacting blocks by plate vibrator etc. complete.

Royalty Charges for Murrum

Conveying materials obtained from road cutting including all lifts, laying in layers of 20cm. to 30cm. breaking clods, dressing to the required lines, curves, grades and section, watering and compacting to not less than 97% of standard proctor density for a lead of 300m. to 500m. inclusive, from the site of excavation to the site of deposition as directed.

RCC Drain - Providing and laying of RCC in M30 grade approach slab including reinforcement and formwork complete with fully automatic micro processor PLC with SCADA enabled reversible drum type mixer/ concrete batch mix plant (pan mixer) as per drawings and technical specifications etc. complete with fine agreegates of required specifications (Natural sand / VSI sand finely washed etc )

Structural Steel for Storm Water Manhole cover - Providing and fabricating structural steel work in rolled sections, fixed with connecting plates or angle cleats in main and cross beams, hip and jack rafters, purlins connecting to truss members and the like, as per detailed designs and drawing or as directed including cutting, fabricating, hoisting, erecting, fixing in position, making riveted/ bolted/ welded connections and one coat of anticorrosive paint and over it two coats of oil painting of approved quality and shade etc. complete.

Providing and laying in situ / ready mix / ready mix M15 CC of trap/ granite /quartzite /gneiss metal for the bottom plugs of wells in the dry condition including compaction and curing wherever necessary etc. complete. (with fully automatic micro processor based PLC with SCADA enabled with reversible drum type mixer/ concrete batch mix plant (pan mixer) with fine agreegates of required specifications (Natural sand / VSI sand finely washed etc )

Providing and laying cement concrete pipe of IS 458:2003 NP-2 class of 450mm diameter in proper line, level and slope including providing and fixing collars in cement mortar 1:2 and curing etc. complete.

Providing and constructing Brick Masonry Inspection Chamber 90cm x 45cm With R.C.C. raft in B.C. soil area including cost of reinforcement, 1:2:4 cement concrete channels half round G.S.W. pipes, Brick Masonry, plastering from inside and airtight with 75 mm thick R.C.C. cover medium duty 140 kg etc. complete.

Providing and fixing 15cm x 10cm salt glazed stoneware gully trap in cement concrete 1:4:8 outside the building including cast iron grating in the sink, connecting glazed stoneware pipe, brick masonry chamber with cast iron lid and cast iron grating for the gully trap.

Full-Bore Electromagnetic Flow Meter: Supply, install and commission Electromagnetic Flow Meter (EMF) As Per ISO 4064, for Raw/Pure water with accuracy +/-0.5% of measured value & protection as per given specifications for size 100 mm-1000mm including sensor, transmitter surge arrestor, cable suitable size for 25 mtrs built in GSM ( with Simcard and its charges,valid for 36 months) including the pipe cutting, leveling and installation of flow meter in the pipelines with necessary tool tackles, cranes including 36 months guarantee etc complete, as may be required at site & based on technical specifications. 100 MM

Flow Meter Chamber- Providing and constructing Brick Masonry Inspection Chamber 90cm x 45cm With R.C.C. raft in B.C. soil area including cost of reinforcement, 1:2:4 cement concrete channels half round G.S.W. pipes, Brick Masonry, plastering from inside and airtight with 75 mm thick R.C.C. cover medium duty 140 kg etc. complete.

Garden Soil - Supplying on site garden soil well sieved 90 5 through I.S. sieve of 10mm size free from stones rubbish like dried grass roots and other such materials. The soil should be fresh from quarry. The colour of the soil generally is red. The soil will be measured by measuring box.(Farma). Item includes royalty charges, corporation charges , transporting, loading/unloading etc. (Lead charges per 90Km. considered.)

Farm Yard Manure - Supplying on site well decayed, well dried, well powdered without clods and free from stones rubbish like dried grass roots and other such materials. The colour of the manure generally is black. The manure will be measured by measuring box.(Farma). Item includes transporting, loading/unloading etc. (Lead charges per 50Km. considered.)

Filling fresh garden soil/silt & manure in sxcavated area including lead upto a distance of 50m (1/10 of unskilled labour)

Mixing garden soil/silt & manure thorougly well, watering previous night. Panting required plant species, lawn grass as directed etc. complete. (1/10 of semi-skilled labour)

Sapling of flowering/shady trees Gulmohar, rain tree, Peltophorum etc. in polybag (ht. min upto 2-2.5mtr.)

Common ornamental shrubs for shrubbery (1 Feet grown in poly bags.)

Areca Palm (6-8 Feet)

Plants required for landscaping - (Euphorbia, Hemelia, Malphegia, Mussanda, Ticoma, Song of India, Golden Bamboo, Buddhas Bamboo, Golden Ficus, Phonicus Palm, X-mas tree, Ficus Panda, etc.) Ploybag size 16X16 inches. Height of plant 5-6 Feet.

Preparing Lawn(30 cm. depth):- Excavating the ground to a required depth of 30cms, removing & conveying unwanted stuff to a required distance as directed. Filling fresh garden soil/silt & manure in excavated area in 3:1 proportion to a height of 30cms. Mixing garden soil and mixing thoroughly well, levelling and watering on previous night. Planting required variety of lawn grass as directed and maintaining till well established by watering, weeding, clipping, rolling etc. complete.

Preparing Edging or Border:- Excavating the ground to a required depth of 20cms, removing & conveying unwanted stuff to a required distance as directed. Filling fresh garden soil/silt & manure in excavated area in 3:1 proportion to a height of 20cms.Filling the excavated part with fresh soil and manure in 3:1 proportion to a required height of 20cms. Mixing,levelling and wateringon the same. Planting, watering, weeding, stirring of soil, replacing casualties, pruning if necessary etc. complete.

Preparing Flower Bed:- Excavating the ground to a required depth of 30cms, removing & conveying unwanted stuff to a required distance as directed. Filling fresh garden soil/silt & manure in excavated area in 3:1 proportion to a height of 30cms. Mixing garden soil and mixing thoroughly well, levelling and watering on previous night. Planting seedling of required annuals 25cms. apart maintaining till well established by watering, weeding, stirring of soil, replacing casualties etc. complete.

Planting large flowering/shady trees (ht. 2 mtr.):- Digging pit with size 0.9X0.9X0.9m removing and conveying unwanted stuff to a required distance as directed. Filling the pit with approved excavated material upto a height of 0.3m and remaining height of 0.60 m with fresh garden soil/silt & manure in excavated area in 3:1 proportion to a height of 30cms. Mixing garden soil and manure thoroughly well, levelling and watering on previous night.Planting two to three three year old minimum 2.0 meter height healthy trees sapling as per specifications, maintaining till well established replacing casualties etc. complete.

Magoxy Infra Pvt. Ltd.