Comprehensive Maint of E/M nature of works in Piru Vihar, Basantar Line under GE (West) Delhi Cantt-10

Amount

NOTES (a) All T & P and labour required will be provided by the contractor as directed. (b) Cost of minor stores such as screws,clamps,insulation tapes,nuts/bolts, nail of required size,flexible wires upto 0.5mm for repair works for each job where required etc shall be deemed to be included in the above quoted item. (c) Rep of the contractor will present in MES cell at NCL and AGE B/R-II & responsible for receiving the job work from 8:30 Hrs to 04:30 Hrs. In absence of rep of contractor penal recovery as decided by GE shall be imposed on contractor. (d) Defect of No Light shall be attended immediately up to 2200 Hrs without fail. (e) The defects shall be rectified within 08 Hrs from date and time of notifying. (f) Job slip as per sample shall be provided by the contractor free of cost. (g) Old unsv material obtained from site against issued by the department to be deposited to MES store yard. (h) Where complete replacement of circuit/point wiring required shall be measured under relevant item.

Identifying and rectifying the defects pertains to ceiling fans/exhaust fans/Air ventilation Fan and connects electric circuit, tightening of loose wiring/conduits /fan capacitors and connection carrying out minor repairs incl blade alignments , screwing/ tightening the nuts/bolts/washers etc incl taking down & refixing properly in the same position after repairs,complete all as specified and directed.

Dismantling of complete defective Ceiling fan of 1200 mm sweep i.e. down rod with its Canopies, Shackle, Blade, Condenser housing with its rubber bushes, split pins, unscrewing the body parts of Ceiling fan, taking out starter, rotor winding,ball bearing, gun metal bush etc. complete all as specified and directed. to carry out the following repairs :-

Notes :- (a) Removing of burnt out fan winding and rewinding of starter winding with suitable size of Copper enamelled wire, ( weight of copper coil shall be same as per dismantled Fan) varnishing heating and testing as per manufactures designed & specifications and as directed by Enge-in-charge.

(b) Re-assembling complete Ceiling fan by fixing only serviceable of old/new spare parts (i.e.) rubber bush of shackle and condenser housing, condenser, gun metal bushes,blades, ball bearing, twin twisted Copper cable, down rod assembly with its shackle condenser housing and Canopies & split pins complete all as specified and design to give designed air delivery including greasing, oiling, cleaning outer body & surfaces etc all as directed.

Ditto- all as per Item No. 3 here-in-before but Air ventilation PVC body/ metal body exhaust fan of size 200/230/300 mm sweep.

Ditto- all as per Item No. 3 here-in-before but only overhauling of celing fan 1200mm/1400mm by greasing and oiling,replacement of unserviceable/defective components, except rewinding of starter winding complete all as directed.

Note Sl.No. 2 : (a) Spare parts found unserviceable/defective will be measured and paid separately under relevant item as Supply and fix in repair .

Supply in Repairs/Replacements of following spare of Ceiling fan 1200mm /1400mm sweep of different make :-

(a) Fan Condenser of capacity 2.5/3.5 mfd, 220 Volts, AC 50 Hz, plastic-casing, two terminal-copper wire, complete all as specified and directed.

(b) Rubber bush for shackle with bolt, nut and lock pin suitable for Ceiling fan 1200mm/1400mm sweep.

(c) Split Pin

(d) Ball bearing of size 6201/6202 as per sample complete all as specified and directed.

(e) Gun metal bush as per sample.

(f) Fan canopy pvc body, white in colour, suitable for existing fan, as per sample and directed.

(g) ceiling fan blade 1200 mm sweep made up of aluminium body having provision of free size monting nuts/screw all as per requirement at site complete all as specified and directed.

(h) MS down rod 300/450 mm for ceiling fan.

M & L for preparation of old painted/rusted surfaces of 1200/1400 mm sweep ceiling fan and re-fixing the same after painting of the same with white colour synthetic enamel paint by spraying including filling cavities with filler & one coat after cleaning all dust etc. and writing MES Number in black paint with skilled painter, complete all as specified and directed by Engr-in-Charge. NOTE:-All T&P and labour team as required will be provided by the contractor and cost deemed to be included in the quoted rate.

M&L in repair louver shutter of exhaust fan suitable for 300 mm size at the height from 3mtr to 6 mtr height making good surface of distubed area complete all as specified & directed. Note: Contractor shall arrange suitable T&P including necessary form work, scoffolding and safety measures to fix properly the exhaust fan shutter complete all as specified and directed.

M & L for Overhauling/Dismantling of defective/rusted Geyser of 25 Ltr capacity, removing inlet/outlet connections, taking out U/S parts by unscrewing bolts and nuts etc. Checking defects and re-assembling the Geyser after refixing serviceable/new parts & cleaning, dicling and refixing only serviceable items and re-installing the Geyser in suitable place/position and connecting inlet-outlet connections & testing complete, all as specified and directed by Engr-in-charge. Note:(a) Items required for replacement of U/S parts will be measured and paid separately under relevant item of sch "A" ).

Supply in Repairs/Replacements of following spare parts of geyser storage type of different make for capacity 25 ltrs (Make of spare parts shall be of existing make or as per samples as required)

(a) Apparatus assembly duly prewired without heating element and thermostat/thermal cutout.

(b) Indication lamp (Green/Red) as per sample.

(c) Thermostat as per sample.

(d) Heating element 2.0 KW, triangular/circular or as per sample given at site complete all as specified and directed.

(e ) cover outer for Geysers (confirming to IS) suitable for any make/capacity/type of Geysers installed at site duly painted with two quotes with enamel (Deco) paint of colour & shade complete all as specified and directed

(f) stainless Steel inner tank of 25 Ltrs capacity complete all as specified and directed as .

(g) geyser bottom and top cover for Geysers (confirming to IS) suitable for any make/capacity/type of Geysers installed at site duly painted with two quotes with enamel (Deco) paint of colour & shade complete all as specified and directed

(h) geyser SS braided pipe of 12 mm (internal dia) suitable for hot/cold water, 450 mm long with brass nuts and rubber washers complete all as specified and directed.

Taking down carefully copper/aluminium point wiring from wooden battan or conduits (light, fan, socket or power) complete including (fittings such as switches, ceiling roses, pendants, regulator, sockets etc. to be measured separately) and making good disturbed surfaces of walls, floor etc.

M&L point wiring with PVC insulated FRLS 1100 Volts unsheathed cable 1.5 Sqmm multistranded copper conductor two run and drawing in & including rigid PVC conduit in walls and on surface conduit for Beam/Ceiling/Column portion FRLS grade ,ISI marked , terminal box of suitable thickness and with 3 mm thick hylam sheet cover as per required cutting for terminal boxes also including provision of earth wire PVC insulated FRLS 1100 Volts unsheathed 1.5 sqmm stranded copper conductor single core cable connected to common earth dolly and making good to the disturb surfaces with cement, matching with existing color by painting all as specified for the following :- Note :- Point wiring drawn in existing conduit/PVC concealed conduit as per site requirement all as specified and directed.

(a) One light/fan/bell point controlled by one by one way switch ( switch to be measured and paid separtely)

(b) One 3 pin socket outlet 5 hole 5 Amp independent with insulated stranded copper conductor cable 1.5 Sqmm single core and PVC insulated FRLS 1100 Volts unsheathed copper conductor 1.5 Sqmm stranded conductor as earth wire connected to dolly complete ( socket and switches to be measured and paid separately). Note :- Point wiring drawn in existing conduit/PVC concealed conduit as per site requirement all as specified and directed.

(c) -ditto- as above item No 2 (a) but Same board.

(d) One light point controlled by two, two way switch ( switch to be measured and paid separtely)

M&L One power point with insulated stranded copper conductor cable 2.5 Sqmm single core and PVC insulated FRLS 1100 Volts unsheathed copper conductor 2.5 Sqmm stranded conductor as earth wire connected to dolly complete ( socket and switches to be measured and paid separately). Note :- Point wiring drawn in existing conduit/PVC concealed conduit as per site requirement all as specified and directed.

M&L switch piano flush type 5 Amp SP one way .

M&L switch piano flush type 5 Amp SP two way .

M&L switch piano flush type 15 Amp SP one way.

M&L socket outlet 5 pin 5 Amp flush type .

M&L in repair socket outlet 2 in 1,3 pin 5/15 Amps.

M&L in repair ceiling rose 3 phase PVC polycorbonate,insulated body.

S & F in repair electronic fan regulator 5 step connecting complete all as specified. .

M&L in repair bell push,flush type,5 amp.

M&L in repair bell ding dong AC,230 volts,single pole.

M/L in repair of lamp holder 240 volt AC PVC/Polycarbonte type with back plate ISI marked complete all as directed.

Taking down DBs,MCBs, Main switch, etc of any make and type from the site and making good to the disturbed surfaces complete all as specified and directed.

M&L in repair MCB distribution board SPN 8 way with 200 Amp rated bus bar double door complete all as specified and directed.

S&F of factory made epoxy polyester powder coated distribution board TP & N 4 way (VTPN MCCB DB) with metal double door (IP-54 protection) fabricated from minimum 1.6 mm thick CRCA sheet and fixed on wall and suitable for universal mounting and including 200 Amps copper bus bar, Neutral bar, standard DIN rail, earth bar and cable ties for cable management, top and bottom removable gland plates with provn for DPX 160, 4 pole MCCB and ELM as incommer and 12 SP MCBs outgoings complete all as specified and conforming to IS: 8623 along with cable end box for above DB including taking down old DBs all as specified. NOTE :- (a) MCBs shall be measured and paid separately. (b) All cables terminating into MCBs shall be connected by using suitable copper lugs/thimbles/sleeves and its cost shall be deemed to be included under respective item of Sch. [Make- L&T/ Legrand / Indoasian /Havells

Supply and fix in repair sheet metal enclosure single pole and Neutral with a two pin earth plug and socket complete with a MCB SP 20 Amp 220 volts, 50 Hz, 10KA breaking capacity complete all as specified and directed.

Supply and fixing in repair amp rating 240V, 10KA 'C' curve miniature circuit breaker (MCB) of following poles and current carrying capacity in the MCB DB complete with connection testing and commissioning.

(i) SP 5 To 63 AMP

(ii) SPN 40 to 63 AMP

Supply and fixing in repair 415V 10KA 'C' curve miniature circuit breaker (MCB) TPN 100 AMP 4 pole complete all as specified and directed.

Taking down carefully sub main wiring three single run 6/10 Sqmm of any make and type complete all as directed.

Supply and fix in repair for submain wiring with two single core PVC insulated FRLS 1100 Volts unseathed stranded copper conductor cable 6 Sqmm in and including PVC conduit for submain wiring and connection complete including rigid PVC conduit FRLS grade,unsheathed copper conuctor cable of 6 Sqmm size stranded conductor as earthwire.

Supply and fix in repair for submain wiring with two single core PVC insulated FRLS 1100 Volts unseathed stranded copper conductor cable 10 Sqmm in and including PVC conduit for submain wiring and connection complete including rigid PVC conduit FRLS grade,unsheathed copper conuctor cable of 10 Sqmm size stranded conductor as earthwire.

Supply and fix in repair MCCB 100 Amps, 4 Pole 415 volts 16 KA 50 HZ complete all as specified and directed.

Supply and fix in repair MCCB 125 Amps, 4 Pole 415 volts 16 KA 50 HZ complete all as specified and directed.

Supply and fix electronic meters temper proof LCD display with polycarbonate cover single phase 230 V, 10- 60Amp, accuracy class-I 50Hz, conforming to IS 13779, IP-54, with parameters to show data, time, current reading, load, PF, voltage and KWH complete all as specified and directed.

M&L in repair of earthing complete with GI steel earth plate electrode 60cm x 60cmx6.0mm thick barried directly in ground vertically to a depth not less than 2.25 metres below ground level with top edge of earth plate at a depth not less than 1.5 mtrs below level ground, connected to GI strip 32x6mm by means of nuts, bolts checks nuts and washers made of GI earth wire protected by GI pipe 40mm bore, medium grade and connected to main switch board or main control board as directed and including concrete pit in PCC (1:3:6) type C1 using 20mm graded aggregate, pre-cast RCC (1:2:4) type-B, over slab 30cmx30cmx10cm with one lifting handle made of 8mm dia MS bar funnel wire mesh, 20mm bore GI or steel pipe medium grade for watering, charcoal or coke and salt in alternate layers, necessary excavation and earth work in any type of soil complete all as shown in electrical plate No 3 of MES schedule Part-I and testing after completion.

Identifying and rectifying the minor defects pertaining to internal electrification of any type and nature such as taking down defective switch/socket/ceiling rose/holders/fittings / fixtures any type, rectification of faulty electric circuits, tightening of loose connections, replacement of old u/s wiring/conduits/casing capping & connections etc. complete all as directed.

Identifying and rectifying the minor defects pertaining to internal electrification of any type and nature such as repair in Bldg LT panels ,taking down defective MCBs / MCB DBs/SPN DBs / TPN DBs any type and repairing/replacements, rectification of all type of electrical faults, tightening of loose Panels electric cablels connections & replacement of old u/s MCBs/DBs as required on sites complete all as specified and directed.

Supply and fix in repair copper wind motor, single phase, 240V suitable for PVC fresh air fan of sweep size 225/ 250/300 mm as per sample given at site complete all as specified and directed.

Supply and fix in repair copper wind motor, single phase, 240V suitable for metallic heavy duty exhaust fan of sweep size 300 mm as per sample given at site complete all as specified and directed.

Supply and fix in repair exhaust fan blade, suitable for metallic/plastic body exhaust/fresh air fan of sweep size 300/250/225 mm as per sample given at site complete all as specified and directed.

Supply and fix in repair single core PVC insulated cable 1.5 Sqmm FRLS 1100 Volts with copper multi stranded conductor and drawing in existing concealed conduits , all as specified and directed by Engr-in-Charge.

Supply and fix in repair single core PVC insulated cable 2.5 Sqmm FRLS 1100 Volts with copper multi stranded conductor and drawing in existing concealed conduits , all as specified and directed by Engr-in-Charge.

Supply and fix in repair single core PVC insulated cable 4.0 Sqmm FRLS 1100 Volts with copper multi stranded conductor and drawing in existing concealed conduits , all as specified and directed by Engr-in-Charge.

Supply and fix in repair Single core PVC insulated cable 10 Sqmm FRLS 1100 Volts with copper multi stranded conductor and drawing in existing concealed conduits , all as specified and directed by Engr-in-Charge.

Supply and fix in repair single core PVC insulated cable 6 Sqmm FRLS 1100 Volts with copper multi stranded conductor and drawing in existing concealed conduits , all as specified and directed by Engr-in-Charge.

Supply and fix in repair copper cable flexible 3 core PVC insulated of size 40/.0076 ll as specified and directed by Engr-in-Charge.

Supply & fix in repair PVC insulated flexible cable three core copper conductor of size 1.00 Sqmm ISI marked covered with white colour round insulation complete as specified & directed.

Supply and fix in repair , 1100 volts grade heavy duty cable with PVC insulated aluminium conductor served with an inner sheathing of PVC armoured, PVC sheathed 6 sq. mm nominal cross section, 2 core.

Supply and fix in repair hylum sheets 3 mm thick (ISI marked) of the following sizes :-

(a) Sheet as per sample suitable for mounting one piano switch 5 Amp and one 5 Amp socket dully cut for mounting as above complete all as specified and directed.

(b) Sheet as per sample suitable for mounting one piano switch 15 Amp and one 15 Amp socket dully cut for mounting as above complete all as specified and directed.

(c) Sheet as per sample suitable for mounting three piano switch 5 Amp dully cut for mounting as above complete all as specified and directed.

(d) Sheet as per sample suitable for mounting four piano switch 5 Amp and one 5 Amp socket dully cut for mounting as above complete all as specified and directed.

(e) Sheet as per sample suitable for mounting five piano switch 5 Amp and one 5 Amp socket dully cut for mounting as above complete all as specified and directed.

Supply and fix in repair 30 watts High efficient LED Building security light fitting with pressure die cast Aluminum housing and has lenses specially designed for Street Lighting with polycarbonate cover. System level efficacy of the Luminarie is >100lm/W. The color temperature is around 6500 K .The luminaire is IP:66 protected . It has an electronic driver complaint to IEC safety standards with a power factor>.0.9, voltage variation range 150-270V complete as specified and directed.

Supply and fix in repairs LED bulb of 9 watt (B-22),with lumen >900 lm/W including dully connecting, fixing with all accessories complete all as specified and directed by Engr-in-Charge.

Supply and fix in repair switch piano flush type 5 Amp SP one way complete all as specified and directed.

Supply and fix in repair switch piano flush type 15 Amp SP one way complete all as specified and directed.

Supply and fix in repair socket outlet 5 pin 5 Amp flush type complete all as specified and directed.

Supply and fix in repair socket outlet 2 in 1,3 pin 5/15 Amps complete all as specified and directed.

Supply and fix in repair ceiling rose 3 phase PVC polycorbonate,insulated body complete all as specified and directed.

Supply and fix in repair switch type normal electronic fan regulator 5 step complete all as specified and directed.

Supply and fix in repair bell push,flush type,5 amp complete all as specified and directed.

Supply and fix in repair bell ding dong AC,230 volts,single pole complete all as specified and directed.

Supply and fix in repair insulated body pvc , angle holder (metal ring) B22 type ISI marked complete all as directed.

Supply and fix in repair 15A plug top 240 Volt AC and connection complete all as specified and as directed

Supply and fix in repair of SS combined 15 amp without Box complete all as specified and directed by Engr-in-charge

Supply and fix in repair of SS combined 15 amp with Box complete all as specified and directed by Engr-in-charge

Supply and fix in repair of SS combined 5 amp without Box complete all as specified and directed by Engr-in-charge

Supply and fix in repair of SS combined 5 amp with Box complete all as specified and directed by Engr-in-charge

Supply and fix in repair ceiling fan capacitor for 1200/1400 mm sweep 2.5 mfd all specfied and directed

Supply and fix in repair switch Modular type 6 Amps one way 230V AC as per sample complete all as specified.

Supply and fix in repair switch Modular type 16 Amps one way 230V AC as per sample complete all as specified.

Supply and fix in repair Modular socket outlet 5 pin 6 Amp socket 2 module as per sample complete all as specified.

Supply and fix in repair Modular socket outlet 5 pin 16 Amp socket 2 module as per sample complete all as specified.

Supply and fix in repair LED batten luminaire surface mounted 2 feet system wattage of 10 watts and system lumen>120 output,CRI>80, POWER FACTOR>0.95, THD>10%, color temperature 3000K- 6500 K , IP-20 protected meets LED IS specifications, short circuit and over circuit protection, voltage range - 150 to 270 volts AC, temperature range 0 to 50 Degree C, and including connecting up with PVC sheathed 1.5 sqmm 3 core copper conductor flexible wire fixed complete all as specified and directed.

Supply and fix in repair LED batten luminaire surface mounted 4 feet system wattage of 20 watts and system lumen>120 output,CRI>80, POWER FACTOR>0.95, THD>10%, color temperature 3000K- 6500 K , IP-20 protected meets LED IS specifications, short circuit and over circuit protection, voltage range - 150 to 270 volts AC, temperature range 0 to 50 Degree C, and including connecting up with PVC sheathed 1.5 sqmm 3 core copper conductor flexible wire fixed complete all as specified and directed.

Supply and fix in repair 10 watts bulkhead fitting with powder coated die cast aluminium housing with glass/ non yellowing polycarbonate cover, IP65 Protection, System level efficacy of the Luminary is > 100 lm/W. Power Factor >0.95, Temperature range 0 to 50 Deg, Driver efficiency >85%, THD<10%, CRI>80, Color Temperature 3000K-6500K, including connecting up with necessary PVC sheathed 3 core 1.5Sqmm copper conductor flexible wire fixed complete all as specified and directed.

Supply and fixing ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) complete all as specified and directed.

Supply and fix exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 300m complete all as specified.

Supply in rpairs/replacements of Self Adhesive PVC Electrical Insulation tape of size 1.80 cmX6.5 m X0.125 mm, mix colour box in a packet of 12 roll complete all as specified and directed.

Supply in rpairs/replacements of brass screw1/2 inch to 1.5 inch in packet of 50 pcs complete all as specified and directed.

Supply in repairs/replacements of Wall Rawl Plugs/Gitti in packets of 100 pcs as per sample complete all as specified and directed.

yameen enterprises

GAUTAM ELECTRIC WORKS

M/s S.G. BUILDERS

M/S BHARAT BUILDERS

SETHI ENTERPRISES

M P TYAGI ENGINEERS AND CONTRACTORS

Concepts And Solutions