Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹96.2 LAccepted-Finance 0 DHANA TEJA BARARI DHANA TEJA MATHURA MATHURA UTTAR PRADESH 281005 | MATHURA | UTTAR PRADESH | 281005 | L1 | Accepted-Finance L1 | |
| 2 | L2₹97.1 L+₹90,000 (0.94%)Rejected-Finance | L2 | Rejected-Finance L2 | |
| 3 | L3₹98.7 L+₹2.5 L (2.64%)Rejected-Finance | L3 | Rejected-Finance L3 |
Tender Value
₹96.2 L
EMD Value
₹96,200
Closing Date
1 Jun 2020, 5:00 pmClosed
SE EWC, AYODHYA
Office of SE EWC, AYODHYA
CONSTRUCTION OF 33 KV LINE FOR NEWLY PROPOSED 33/11 KV 1X5 MVA CAPACITY S/S ASHRAFPUR BARWAN IN DISTT AMBEDKER NAGAR (AKBARPUR) ON PARTIAL TURNKEY BASIS IN THE JURISDICTION OF ESWD, AYODHYA UNDER SUPERINTENDING ENGINEER EWC, MVVNL, AYODHYA
2020_MVVNL_465135_1
2/SE/EWC/AYO/2020-21
Open Tender
Electrical Works
Item Wise
180 days
ambedkar nagar
Please refer Tender documents.
2 documents required · 2 mandatory
₹3,540
SUPERINTENDING ENGINEER EWC, AYODHYA
₹96,200
Yes
4 Jun 2020
2 May 2020
2 Jun 2020
2 May 2020
1 Jun 2020
2 May 2020
Amount
Carriage of following material (FROM SI. No. 1.01 To 1.06) from store centre AKBARPUR to dump store & from dump store to the site of work including loading, unloading and proper satcking at site etc.
V Type channel cross ram 100x50xx60
Stay wire 7/8 SWG.
33 KV Stay Set With Stay Rod 20X1800 mm
Cost of ACSR Dog Conductor
STP 11.0 Mtr. Long
Cost of 33 KV 3x300 sq mm XLPE Cable
Supply of following materials (FROM SI. No. 2.01 To 2.10) at dump store including loading, unloading and proper satcking at site etc.
PCC 9.0 Mtr, Long
STP 13.0 Mtr. Long
33 KV Pin Insulator (Polymer)
Disc insulator B & S Type (Polymer)
M.S. Top Channel 125x65 mm 3200 mm
M.S. Angle 65x65x6 mm Bracing, 4300 mm
Gaurding Angle 65x65x6 mm, 3500 mm
G.I. Wire 8 SWG for guarding (Across the line)
G.I. Wire 6SWG for guarding (Along the line)
33 KV Outdoor jointing Kit for 3x300 sq mm XLPE Cable
33 KV Straight Through Jointing kit kit for 3x300 sq mm XLPE cable
Safe Dragging/ Loading - unloading from dump site to pit site and Fabrication & erection of Single Pole for 33 KV Line on 9.0 Mtr PCC Pole with fitting of necessary clamp & other acessories like 1 no Channel Cross Arm, (Contractor will provide 3 nos. 33 KV G.I. Pin, necessary clamps, F-brackets, Nut - Bolts, Washers & all Civil Materials)
Safe Dragging/ Loading - unloading from dump site to pit site and Fabrication & erection of Double pole of 33 KV Line on 9.0 Mtr PCC Pole with fitting of necessary clamp & other acessories like 1 No Top channel of 125x65 mm size, Fitting of Bracing angle, (Contractor will provide 3 No G.I. Pin, necessary clamps, Disc Fitting, Nut - Bolts & all Civil Materials)
Safe Dragging/ Loading - unloading from dump site to pit site and Fabrication & erection of Four pole for 33 KV Line on 9.0 Mtr PCC Pole with fitting of necessary clamp & other acessories like 4 Nos Top channel of 125x65 mm size, Fitting of Bracing angle, (Contractor shall provide 9 No G.I. Pin, necessary clamps, Disc Fitting, Nut - Bolts & all Civil Materials)
Erection of single stud pole support one PCC Pole 9.0 Mtr long with fixing of necessary clamps and other accessories required for erection. (Contractor shall provide necessary clamps, Nut - Bolts, Washers etc)
Safe Dragging/ Loading - unloading from dump site to pit site and Fabrication & erection of Single Pole for 33 KV Line on 11/13 Mtr ST Pole with fitting of necessary clamp & other acessories like 1 no Channel Cross Arm, (Contractor shall provide 3 nos. 33 KV G.I. Pin, necessary clamps, F-brackets/Top cleet, Nut - Bolts, Washers & all Civil Materials)
Safe Dragging/ Loading - unloading from dump site to pit site and Fabrication & erection of Double pole of 33 KV Line on 11/13 Mtr ST/9MTR PCC Pole with fitting of necessary clamp & other acessories like 1 No Top channel of 125x65 mm size, Fitting of Bracing angle, (Contractor shall provide 3 No G.I. Pin, necessary clamps, Disc Fitting, Nut - Bolts & all Civil Materials)
Safe Dragging/ Loading - unloading from dump site to pit site and Fabrication & erection of Four pole for 33 KV Line on 11 Mtr ST Pole with fitting of necessary clamp & other acessories like 4 Nos Top channel of 125x65 mm size, Fitting of Bracing angle, (Contractor shall provide 9 No G.I. Pin, necessary clamps, Disc Fitting, Nut - Bolts & all Civil Materials)
Erection of single stud pole support one ST Pole 11.0 Mtr long with fixing of necessary clamps and other accessories required for erection . (Contractor shall provide necessary clamps, Nut - Bolts, Washers etc)
Fabrication & Erection of exposure Dead End Double pole on STP/ PCC support with supply and mounting of necessary clamps and other accessories for holding cable of D/P with clamp. (Contractor shall provide all materials except Poles)
Cradle Guarding of 33KV line at road crossing, 11KV line crossing, canal/telephone line crossing by fixing M.S. angle 65X65X6mm, 3500 mm at double pole and 2600mm long at single pole by stringing and sagging of 3 No. G.I.wire and all fittings ,tightining with mounting.
Earthing of Pole STP/PCC by 6 SWG Wire by providing and fixing of earthing rod as per norms by connecting cross arm,g.i.pin ,pole to earth rod complete in all respect. (Contractor shall provide all the material Like Earthing rod , 6swg G.I. wire)
Laying,Stringing, sagging, and binding of ACSR Dog conductor. 3 Phase of 33KV Line including fixing,mounting of gun fittings suitable for Dog Conductor at sectional point. (Contractor shall provide necessary gun fitting(Three bolt tension hardwere), Bolt and Nuts etc)
Fabrication & Erection of Cross arm support size 65X65X1550 mm. with holding clamps. (Contractor shall provide all materials like 65X65X6 mm angle & holding clamps and nut bolt )
Patrolling on feet and removal/lopping and chopping of tree branches which are lying in route of 33 KV Overhead Line.
Jumpering by ACSR Dog Conductor at Sectional pole including providing PG Clamps and necessary clmaps & Nut bolts.
Nozeling and grouting of stay at sectional pole and extra stay sets at angle locations (All the civil material ,Clamps , N&B arranged by the contractor except stay set and Sty Wire.)
Painting of Structure Painting of 11/13 Mtr STP/ rail support structure with one coat of ready mixed primer and 2 coats of AL.Paint of good quality including cost of material, Labour and T&P complete in all respect.
Grouting of 9 Mtr PCC / 11 /13Mtr STP support structure by digging of pit 1.5 Mtr/1.83 Mtr deep for 9 Mtr PCC / 11 Mtr STP respectively, groutung with 1:4:8 Ratio cement, sand & first class brickballast 0.268/0.285 cu mtr for 9 mtr PCC Pole & 11 mtr STP, plinthing 0.3 Mtr above G/L and proper plastering.
Laying of single circuit In Normal soil by digging of trench 1050 mm deep, 750 mm wide including supply of required material as fine sand, Ist class bricks, Inter axial spacing between the two cable should be in between 0.25 m to 0.40m , the two cables should be separated by a partiton of single bricks (All the material will be supplied by the contractor except 33KV XLPE cable)
Laying of Double circuit Cable Laying through C.I./ Hume Pipe for Crossings. (All the material will be supplied by the contractor except 33KV XLPE cable)
Laying of 33 KV XLPE cable 3X300 sq.mm (Single circuit ). XLPE cable as per ISS 1255/1983 of amendment there of by trench iess Technology method by Deep Drilling System. The jop includes the cost of excavation of Earth, laying of cable inside it. The work is to be carried out as per Govt. approved Drg..
High Pressure testing to which 33 KV Line able to be stand for duration of 5 minutes after completion of Laying, Stringing, sagging, binding and Jumpering of ACSR Dog conductor. ( Testing equipment will be arranged by the contractor)
Hosting of 33 KV Cable on existing/erected support with provision of MS Pipe 150 mm dia 3 mtr long suitable for 3x300 sq mm cable fixing of proper support and its clamping , providing long barral lugs 6 nos and P.G. Clamps & "Y" shape jumpering properly and 02 nos. supporting angle 65X65X6, 3500 mm as per RESSPO Norms. (All material will be supplied by the contractor like MS Pipe , P.G. Clamps, Al. Lug And Supporting Angle 65X65X6, 3500 mm).
Installation of Heat Shrinkable Type cable jointing kits O/D end Termination suitable for 33 KV XLPE cable confirming to IS ESI-09-13-IS-13573 of 1992 amendment I&II VDE-0278 of latest version there of if any.
Installation of Heat Shrinkable Type cable jointing Straight Through kit suitable for 33 KV XLPE cable confirming to IS ESI-09-13-IS-13573 of 1992 amendment I&II VDE-0278 of latest version there of if any.
Fabrication, Erection and grouting of cable joint/ route marker. ( Contractor shall provide all materials)
Hindustan Electric Work
DEVYANSH CONSTRUCTION AND DEVELOPERS PVT. LTD.
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .