Augmentation of 100 Kva substation to 250 Kva along with renovation of sub station near Iram Lane/Jamia Masjid

Supply, installation, testing and commissioning of:

9 mts steel tubular pole post 410 (SP-33) IS 2713 (part-II) 1990 as per REC Standard

MS Channel iron(ISLC 75 designation) 100x50x50x6 mm 9' long (2 No) duly fabricated as per site requirement and painted with two coats of Red oxide and Al. Paintas per REC Standard .

MS Channel iron(ISLC 75 designation) 75x40x40x6 mm 9' long (8No) duly fabricated as per site requirement and painted with two coats of Red oxide and Al. Paintas per REC Standard .

MS Channel iron(ISLC 75 designation) 75x40x40x6 mm 6' long (2 No) duly fabricated as per site requirement and painted with two coats of Red oxide and Al. Paintas per REC Standard .

MS Angle iron braces (ISA 5050 designation) 50x50x6mm 6' long (4 No) duly fabricated as per site requirement and painted with two coats of Red oxide and Al. Paint as per REC Standard

Providing of Chemical Earthing of Sub-Station for neutral earthing 2 mtr long 50mm dia GI to copper with additional 1 length GI pipe 38mm connected with chemical earthing and with extension of GI strip 25*3mm upto all equipments.Earthing has been laid through insulators to avoid with the existing structure for LA.

Galvanized Nuts & Bolts & washers of sorts. (Galavinsied as per IS-2633/1986)

GI Strip for Earthing 25x5mm as per REC Standard

300 mm² PVC single core LT cable connforming to IS 1554 (part -I) 1988 for incoming and outgoing circuits to be connected with LT Network including thimbling with 300 mm sq Al lugs

Bi matellic Clamps19mm².

11KV 400 AMP Gang Operated switch gear

Drop-out set (Horn-gap type) as per REC standard F6

11KV Lighting Arrester Set (Station type) as per REC standard fonforming to IS 3070 part -III and as per REC standard

250 KVA transformer11kV/440 Volts oil cooled Aluminium wound outdoor Type conforming to IS 2026-1977 level 1 (part -I/1981( as ammdendend upto date and CBIP manual) approved by the Department including earthling of Transformer along with fixing of flat iron strip to be fixed on earthling insulating boots of Sub Stations on two poles structure as per REC Standard F1,F2, F3 F4 &F10

11KV pinwith insulators Brown glazed porcelain insulator confirming to IS-731/1971 Amendments 1 to 5 type B with 320mm minimum creepage distance and with lead/Zinc thimbles suitable for use with G.I forged pin having small steel heads as per IS-4l86 (P.I) 1993 and IS-2486 (P.II)1989 and revision with latest amendments if any as per REC Standard C-1

Danger plate as per REC Standard

Earthing for Rods as per REC Standard (J-1) (Spiral Type)

Earthing insulating boots

Providing, Erection, testing & commissioning of MS Angle iron for Transformer Belt (ISA 5050 designation) 50x50x6mm 10' long duly fabricated as per site requirement and painted with two coats of Red oxide and Al. Paint as per REC Standard

Anticlimbing Device as per REC Standard

Sign Board

Cement bottoming of pole structures as per REC drawing enclosed

Painting of poles/ structure with 2 coats of Al. & red oxide paint and painted of orange colouras per REC Standard

Supply, installation, testing and commissioning of:

8 mts steel tubular pole posts 410 (SP-15) conforming to IS 2713 (part-II) 1990 as per REC Standard

Earthing for Rods as per REC Standard (J-1) (Spiral Type)

50 mm ²ACSR as per REC Standard. Conductor(rabbit ) IS 4826/1979 and laid as per REC standard

100 mm ²ACSR as per REC Standard. Conductor(dog) IS 4826/1979 and laid as per REC standard

LT Shackles Insulators brown glazed 90X75MM along with mukki clamps clamp

pole clamps

Galvanized Nuts & Bolts & washers of sorts. (Galavinsied as per IS-2633/1986)

Cement bottoming of pole structures as per REC drawing enclosed

Painting of poles/ structure with 2 coats of Al. & red oxide paint and painted of orange colouras per REC Standard

WULAR INFRASTRUCTURE PVT LTD

M/S FAIRDEAL TRADERS

M/S MALIK CONSTRUCTIONS AND SUPPLIERS

M/S KHURSHID AHMAD BHAT