Ordinary Repairs- 2020-21 to NH 61, Filling potholes with Bituminous Material (Post Monsoon) on Kalyan Nirmal Road NH 61 Km 95/570 to 101/00 ( Khubi to Madh ) in stretches District Pune in the state of Maharashtra.

Amount

Item No 1 :- Picking the road surface including sectioning etc. complete (BT surface.)

Item No. 2 :- Providing and applying tack coat on the prepared surface heating by fames in Boiler and spraying bitumen with sprayer on Dry / Hungry B.T. surface 3 kg/10 sqm. (VG-10 bulk bitumen rates are considered to arrive at rates)

Item No. 3:- BITUMINOUS MACADAM: Proving and laying bituminous macadam using crushed aggregates of Grading 1, premixed with bituminous binder, transported to site with VTS , laid over a previously prepared surface, finished to the required grade, level, alignment, and rolling to achieve the desired compaction for 80/100 mm compacted thickness with 3.3 % using specified grade of Bitumen. -- USING Batch mix type hot mix plant without SCADA, Sensor Paver, vibratory roller.(VG-30 bulk bitumen rates are considered to arrive at rates)

Item No.4 :- Providing and applying tack coat on the prepared surface heating by fames in Boiler and spraying bitumen set footed in bitumen boller on B.T. surface 2.5 kg/10 sqm.(VG-10 bulk bitumen rates are considered to arrive at rates)

Item No.5 :- Providing and laying bituminous concrete using crushed aggregates of grading1 , premixed with bituminous binder @ 5.40 per cent by weight of total mix and filler, transported to site with VTS , laid over a previously prepared surface, finished to the required grade, level, alignment, and rolling to achieve the desired compaction for 30 mm compacted thickness with specified grade of bitumen, Excluding prime/coat. Using Batch mix type hot mix plant without SCADA, Sensor Paver, vibratory roller with stone dust filler. (VG-30 bulk bitumen rates are considered to arrive at rates)

Item No 6 :- Road Marking with Hot Applied Thermoplastic Compound with Reflectorizing Glass Beads on Bituminous Surface- Providing and laying of hot applied thermoplastic compound 2.5 mm thick including reflectorizing glass beads @ 250 gms per sqm area, thickness of 2.5 mm is exclusive of surface applied glass beads as per IRC:35 .The finished surface to be level, uniform and free from streaks and holes.complete.

M/s V.L.Wable ans Associates

D D CONSTRUCTION