Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹34.7 LAccepted-Finance | ₹34.7 L | L1 | Accepted-Finance LOWEST |
| 2 | L2₹35.0 L+₹20,705.25 (0.60%)Rejected-Finance | ₹35.0 L+₹20,705.25 (0.60%) | L2 | Rejected-Finance NOT LOWEST |
| 3 | L3₹35.1 L+₹30,626.25 (0.88%)Rejected-Finance 205 IIND PHASE INDUSTRIAL AREA BARMER 344001 | BARMER | BARMER | RAJASTHAN | 344001 | ₹35.1 L+₹30,626.25 (0.88%) | L3 | Rejected-Finance NOT LOWEST |
| 4 | L4₹36.1 L+₹1.3 L (3.81%)Rejected-Finance VILL JASSAI DISTRICT BARMER RAJ 344001 | JASSAI | BARMER | RAJASTHAN | 344001 | ₹36.1 L+₹1.3 L (3.81%) | L4 | Rejected-Finance NOT LOWEST |
| 5 | L5₹37.8 L+₹3.1 L (8.84%)Rejected-Finance NEAR RAILWAY STATION UTARLAI BARMER RAJASTHAN PIN 344001 | BARMER | RAJASTHAN | 344001 | ₹37.8 L+₹3.1 L (8.84%) | L5 | Rejected-Finance NOT LOWEST |
| Sl No | Description | Qty | Unit | M/S LAXMAN CONSTRUCTION COMPANY L10 | Lalit and Brothers L7 | M.D. CONSTRUCTION CO. L9 | National Rewinding Works L3 | M/S Tanisha Traders L8 | m/s jogaram sujaram L4 | Devi Engineeing L2 | BHUSHAN BHIMRAO PATIL L1 | M/S TANUSHREE CONSTRUCTION COMPANY L5 | S.K. INFRASTRUCTURE L6 |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 1.00 | Demolition of Cement Concrete (unreinforced) of any description and in any position not otherwise specifically provided for, complete all as specified and directed. | 74 | Cum | 3,500 ₹2,59,000 | 230 ₹17,020 | 400 ₹29,600 | 100 ₹7,400 Lowest | 300 ₹22,200 | 200 ₹14,800 | 200 ₹14,800 | 800 ₹59,200 | 300 ₹22,200 | 259.45 ₹19,199.3 |
| 2.00 | Dismantling of stone slabs and tiles of any description or thickness in floors,aprons etc., complete all as specified and directed. | 94 | X Sqm | 7,000 ₹6,58,000 | 230 ₹21,620 | 300 ₹28,200 | 100 ₹9,400 | 200 ₹18,800 | 30 ₹2,820 Lowest | 80 ₹7,520 | 400 ₹37,600 | 320 ₹30,080 | 300 ₹28,200 |
| 3.00 | M & L Hardcore using broken stone boulders not exceeding 63mm deposited spread and levelled in layers not exceeding 15 cm thick watered and rammed to a true surfaces complete all as specified & directed. | 9 | Cum | 7,000 ₹63,000 | 940 ₹8,460 | 1,500 ₹13,500 | 1,000 ₹9,000 | 1,500 ₹13,500 | 1,500 ₹13,500 | 1,450 ₹13,050 | 1,100 ₹9,900 | 350 ₹3,150 Lowest | 1,400 ₹12,600 |
| 4.00 | M&L 75 mm PCC 1:4:8 type D-2 as in sub base complete all as specified and directred | 85 | Sqm | 2,000 ₹1,70,000 | 230 ₹19,550 Lowest | 250 ₹21,250 | 250 ₹21,250 | 300 ₹25,500 | 240 ₹20,400 | 270 ₹22,950 | 270 ₹22,950 | 355 ₹30,175 | 290 ₹24,650 |
| 5.00 | Supply only Fine aggregate (sand) for sand cousioning , complete all as specified and directed. | 5 | Cum | 8,000 ₹40,000 | 900 ₹4,500 | 500 ₹2,500 Lowest | 500 ₹2,500 Lowest | 1,100 ₹5,500 | 900 ₹4,500 | 500 ₹2,500 Lowest | 800 ₹4,000 | 800 ₹4,000 | 500 ₹2,500 Lowest |
| 6.00 | M&L for Rubber Moulded glossy finish precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness M-35 grade with grey cement and pigment., including labour for sand cushioning, complete all as specified and directed.
Note:- Sand will be paid and measured separately as supply only item No. 5.00 here in above. | 85 | Sqm | 2,000 ₹1,70,000 | 920 ₹78,200 | 850 ₹72,250 | 900 ₹76,500 | 925 ₹78,625 | 800 ₹68,000 | 795 ₹67,575 | 700 ₹59,500 Lowest | 780 ₹66,300 | 700 ₹59,500 Lowest |
| 7.00 | Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required, complete all as specified and directed. | 10 | Cum | 7,000 ₹70,000 | 6,300 ₹63,000 | 6,000 ₹60,000 | 5,500 ₹55,000 | 5,000 ₹50,000 | 4,500 ₹45,000 Lowest | 5,200 ₹52,000 | 6,300 ₹63,000 | 6,000 ₹60,000 | 5,800 ₹58,000 |
| 8.00 | M&L for two coat of synthatic enamel paint over a coat of primer on new concrete surface including surface preparation of any description (Road side cement concrete kerb stone in ZABRA Pattern) complete all as specified and directed. | 24 | Sqm | 800 ₹19,200 | 32 ₹768 Lowest | 100 ₹2,400 | 50 ₹1,200 | 75 ₹1,800 | 80 ₹1,920 | 180 ₹4,320 | 110 ₹2,640 | 86 ₹2,064 | 95 ₹2,280 |
| 9.00 | M & L Filleting in any position and to any shape in cement mortar 1:4 exc 25 but n.exc 50 Sqcm in sectional area including all mitres, stops, etc., complete all as specified and directed. | 120 | Rm | 2,000 ₹2,40,000 | 25 ₹3,000 Lowest | 100 ₹12,000 | 50 ₹6,000 | 200 ₹24,000 | 60 ₹7,200 | 140 ₹16,800 | 70 ₹8,400 | 150 ₹18,000 | 100 ₹12,000 |
| 10.00 | M&L for Excavating in trenches hard/ dense soil , n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out , complete all as specified and directed. | 46 | Cum | 1,500 ₹69,000 | 195 ₹8,970 | 200 ₹9,200 | 150 ₹6,900 | 200 ₹9,200 | 200 ₹9,200 | 110 ₹5,060 Lowest | 300 ₹13,800 | 350 ₹16,100 | 250 ₹11,500 |
Tender Value
₹46 L
EMD Value
₹92,000
Closing Date
12 Nov 2025, 6:00 pmClosed
GE (A) BARMER
GE (A) BARMER JALIPA CANTT
SPL REPAIR TO HARD STANDING PATHWAY ALLIED FACIALITY AND TO FENCING AIN THE RAPTOR SCHOOL AMENITY CENTER AT JALIPA MIL STN UNDER GE A BARMER
2025_MES_736146_1
8867/E8
Open Tender
Civil Works
Item Rate
180 days
BARMER
Please refer Tender documents.
8 documents required · 8 mandatory
₹500
GE (A) BARMER
₹92,000
Yes
13 Jan 2026
20 Oct 2025
14 Nov 2025
20 Oct 2025
12 Nov 2025
3 Nov 2025
Amount
Demolition of Cement Concrete (unreinforced) of any description and in any position not otherwise specifically provided for, complete all as specified and directed.
Dismantling of stone slabs and tiles of any description or thickness in floors,aprons etc., complete all as specified and directed.
M & L Hardcore using broken stone boulders not exceeding 63mm deposited spread and levelled in layers not exceeding 15 cm thick watered and rammed to a true surfaces complete all as specified & directed.
M&L 75 mm PCC 1:4:8 type D-2 as in sub base complete all as specified and directred
Supply only Fine aggregate (sand) for sand cousioning , complete all as specified and directed.
M&L for Rubber Moulded glossy finish precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness M-35 grade with grey cement and pigment., including labour for sand cushioning, complete all as specified and directed. Note:- Sand will be paid and measured separately as supply only item No. 5.00 here in above.
Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required, complete all as specified and directed.
M&L for two coat of synthatic enamel paint over a coat of primer on new concrete surface including surface preparation of any description (Road side cement concrete kerb stone in ZABRA Pattern) complete all as specified and directed.
M & L Filleting in any position and to any shape in cement mortar 1:4 exc 25 but n.exc 50 Sqcm in sectional area including all mitres, stops, etc., complete all as specified and directed.
M&L for Excavating in trenches hard/ dense soil , n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out , complete all as specified and directed.
M&L for PCC 1:4:8 type D-2 (using 40mm gde agg) as in foundation and mass concrete, complete all as specified and directed.
Returning , filling in, includidng spreading , levelling , watering and well ramming in layers not exc 25 cm in hard/dense soil complete all as specified and directed.
Removing excavated material n.exc 50m and depositing where directed at a level n.exc 1.5 m above the starting point, complete all as specified and directed.
M&L PCC 1:2:4 type B-1(Using 20mm graded crushed stone agg) in lintels upto 1.5 m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs , water troughs and the like including weathering, slightly rounded for chamfered angles and throating, complete all as specified and directed.
M & L for Glass mosaic tiles coloured in floor as well as vertical surfaces of walls in any pattern of light & dark shade etc as approved , Set and jointed in chemical addseive over existing plastered surface, complete all as specified and directed.
Supply and laying 500 micron thick HDPE sheet (virgin quality ) water proof, wrinkle free without puncture having minimum weight 390 gm/sqm over tack coat/ sand cushion as specified in the design with overlap between adjacent strips and at transverse joints as minimum 300 mm complete all as specified and as directed
Taking down cement plaster of any description, any thickness from surfaces of walls/soffits of roof projections & chajjas /ceilings etc. incl raking out joints, hacking for keys, scrubbibg down with water etc complete all as specified and directed.
M&L for rendering 10mm thick in CM (1:4) on fair faces of brick work or concrete surfaces, RCC members, finished even and smooth without using extra cement complete all as specified and directed.
M&L for 25 mm thick , PCC 1:2:4 (Type B0 using 20 mm gdd agg) as in levelling course to match the undulations of roof and in in coping , roof kerbs, fins including benching etc complete all as specified and directed
Demolition of brickwork or stone, PCC block, boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars etc, but excluding ashlars facings, dressed stone work and precast concrete articles complete all as specified and as directed.
M & L for precast cement concrete solid block masonry exc 10cm in width and setting in CM 1:6 type C1, 1:3:6 , complete all as specified and directed.
M & L for Rendering 15mm thick cement mortar in 1:4 on fair faces of brick work or concrete surfaces even and smoothe without using extra cement, complete all as specified and directed.
M&L for preparation of new surface/undecorated surfaces of walls and applying two coats of Cement Base Paint of approved tint over a coat of priming on plastered and other surfaces with alkali resistant priming paint, complete all as specified and directed.
Excavating in post holes (or similar holes) each n exc 0.5 cu. m, getting out, in hard / dense soil returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, complete all as specified and directed.
M&L for PCC 1:3:6 type C-2 (using 40mm gde agg) as in foundation and mass concrete for post holes, complete all as specified and directed.
S&F Joist, channel, angle ot tee sections, fixed independently, without connecting plates, etc(cut to ordinary lengths i.e within 20mm of the length indicated quality conforming to Fe 410-W(gde-E-250)quality-A, complete all as specified and directed.
S&F for MS flat iron fillets in posts and struts in fencing ,drilling holes (for securing wire mesh etc),including necessary drilling ,bolting or riveting etc confirming to Fe 410-0or fe 310-0, complete all as specified and directed.
Supply only GI chain link galvanised iron fencing, any size (or) type of 3mm to 4mm dia wire, complete all as specified and directed. Note:- (i)- Weight of GI chain link will be determinated by BOO (ii)- A BOO will be constituted by GE
S&F in replacement 110 mm PVC(SWR) pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified and directed.
Dismantling posts or struts (wood, steel or R.C.C.) any section, including taking out embedded portion in cement concrete and separating / Removing of concrete from embeded portion of post and making good disturbed ground, complete all as specified and directed.
Dismantling fencing wire mesh, any type, complete all as specified and directed.
S & F for Galvanised 2 strand, steel barded wire 2.24mm dia barbed with 2mm dia barbs at 75mmmm spacing and straining and fixing to any type of strandard rails straning bolts, incl, securing or tying at crossings with and provision of galvanised mild steel, wire staples or steel pins etc complete all as specified and directed. (each line wire to be measured separately).
M&L for preparing new steel surfaces and applying two coat of synthetic enamel paint over a coat of red oxide primer on steel surfaces of any description over 10 cm width or girth incluidng necessary preparation of surface all as specified and directed.
Fixing only chain link fencing including line wires, any mesh, size and type toany type of standards, rails, straning bolts, etc. including provision of binding wire, complete all as specified and directed. Note:- Material will be obtained from item No. 28.00 here-in-above
Supply only 5 to 10mm mild steel in flat, round (or) square bars, in available length FE 410 W (GDE- E- 250) quality A, complete all as specified and directed. Note:- Labour charges will be paid above mention item No. 34.00
S&F mild stell screw bolts of 11 to 15 mm diameter of shank (machine made ) with hexagonal or squre heads at one end and screwed the other ,each screwed end to to be fitted with washers and one hexagonal or squre nut , exceeding 5 cm and not exceeding 10 cm long, complete all as specified and directed.
M&L for framed work as in doors or gates of angle or other section with gusset plates, rails, braces etc complete drilled for fixing of steel sheeting or other covering. Doors etc to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fitings (exclusive of steel sheeting or other covering, running ralls and guides) and hanging also fatening and fixing complete all as specified and as directed.(Fe-410 W Gde E-250-A)
M&L for Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips
M&L for Mild steel TMT bars but 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders, complete all as specified and directed.
M&L for Formwork for flat finished surfaces to sides of concrete foundations, footings, bases of columns, raft and raft beams,sides and soffits (if any) of foundation and plinth beams;and similar work; vertical or to batter, complete all as specified and directed.
M&L for M-25 Cement concrete Foundations, includingrafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete, complete all as specified and directed.
M&L for Formwork for flat finished surfaces to sides of square, rectangular and polygon pillars,posts, struts, piers, columns and stanchions, complete all as specified and directed.
M&L for Reinforced cement concrete (Nominal mix )M-25 in Columns, pillars, piers, posts and struts, complete all as specified and directed.
Formwork to faces of walls, retaining walls, abutments, parapets and staircase railings and similar work including attached pillasters, buttresses, etc.; vertical or to batter, complete all as specified and directed.
M & L Hardcore using broken stone boulders not exceeding 63mm deposited spread and levelled in layers not exceeding 15 cm thick watered and rammed to a true surfaces complete all as specified & directed.
M&L 75 mm PCC 1:4:8 type D-2 as in sub base complete all as specified and directred
M&L for 100 mm thick cement concrete 1:2:4, type B-1 (20mm graded aggregate) as in floors,hardstanding without using extra cement, complete all as specified and directed.
Supply only Fine aggregate (sand) for sand cousioning, complete all as specified and directed.
M&L for 300x300x10mm thick non skid parking floor glosy finish paver tiles with grey cement and pigment over and including 15mm thick screed in cm(1:4), set joinet and pointed in neat cement slurry in floors concrete, complete all as specified and directed.
M&L for Rubber Moulded glossy finish precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness M-35 grade with grey cement and pigment, complete all as specified and directed.
Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required, complete all as specified and directed.
M&L for two coat of synthatic enamel paint over a coat of primer on new concrete surface including surface preparation of any description (Road side cement concrete kerb stone in ZABRA Pattern) complete all as specified and directed.
S&F for 110mm bore of PVC (SWR) pipes single socketed in any length with rubber ring joints laid on wall complete all as specified and as directed.
Supply and lay in repair LT service cable 6 sqmm 2 core inside PVC conduit 20 mm dia medium grade for landscape lighting/ garden lighting inside trench or on wall/floor complete all as specified and as directed. Note: The rate quoted must be inclusive of laying the cables in trench at max 10 cm depth or mounting on floor/wall
S&F in replacement LED Bollard Garden ligtht of 9W with excellent light output through its PMMA Windowsensuring maximum illumination surrounding with IP 65 protection of Height <1 Mtr with fixing accessories including taking down the u/s fitting complete all as specified and directed by Engr-in-Charge.
Supply and fix LED flexible mains 220 V AC volatge LED strips suitable for outdoor applications IP-65 of length 18 m and necessary arrangement for cable connection complete all as specified and as directed.
S&F loop in- loop out fuse junction box of internal dimension 200x140x95mm made out of FRP sheet and locking screw fitted with and incl 6 Amps SP MCB - 1 No , 20 Amps rated 4 Way connectors for 3 phase and neutral incoming/out going, mounted in the box, fixing on steel tubular/Rail poles including necessary aluminium clamps, suitable glands, lugs,GI nut and bolts including taking down old u/s junction box complete all as specified and directed by Engr-in-Charge. Make : Sintex Cat No GSJB-2014 or techno-commercially equivalant in Hensel/OBO, complete all as specified and directed.
NOTE:- (i)- Quantities are clubbed in BOQ for two Jobs. Item's qty details as per Annexure on Sl. Pg. No. 22 of tender.
Devi Engineeing (BID ID -3472389)
National Rewinding Works (BID ID -3471128)
m/s jogaram sujaram (BID ID -3471223)
M/S TANUSHREE CONSTRUCTION COMPANY (BID ID -3468140)
S.K. INFRASTRUCTURE (BID ID -3471174)
Lalit and Brothers (BID ID -3470602)
M/S Tanisha Traders (BID ID -3471171)
M.D. CONSTRUCTION CO. (BID ID -3470804)
M/S LAXMAN CONSTRUCTION COMPANY (BID ID -3465794)
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.77 MB
BOQ_824300.xls
BOQ • 2.85 MB
TENDERDOC.pdf
Tender Documents • 2.97 MB
Corrigendumno1.pdf
PDF • 0.36 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .