ADDN / ALTN TO OPEN HARD STANDING MANGER AND WATER THROUGH OF SICK ANIMAL LINE BLDG NO. NP-41 AND PROVN 02 X RW AND 01 X MW UNDER AGE B/R-II OF GE (NORTH) DHAMPUR

Amount

Surface dressing not exc 15cm deep in any type of soil, complete all as specified and directed.

Surface excavation not exc 30cm deep and averaging 15cm deep and getting out in any type soil, complete all as specified and directed.

Excavating in trenches, not exceeding 1.5 mtr wide and not exceeding 1.5 mtr in depth for foundation, shaft, wells, cesspits, manholes, laying of pipe/ cables etc. and getting out in any type of soil, complete all as specified and directed.

Returning, filling in including spreading, leveling, watering and well ramming in layers not exc 25cm thick, complete all as specified and directed.

Removing excavated material (soil) to a distance not exceeding 50 mtr and deposited where directed at a level not exceeding 1.50 mtr above the starting point, complete all as specified and directed.

M&L for hardcore of broken stone or boulders of gauge not exc 63mm, deposited, spread and leveled in layers not exc. 15cm thick, watered and well rammed to a true surface, complete all as specified and directed.

M&L for hardcore of broken stone or boulders of gauge exc 63mm but not exc 100mm, deposited, spread and leveled in layers not exc. 15cm thick, watered and well rammed to a true surface, complete all as specified and directed.

M&L for plain cement concrete 1:4:8 type D-2 (using 40mm graded crushed stone aggregates) as in foundation, filling in and mass concrete etc., complete all as specified and directed.

M&L for 75mm thick plain cement concrete 1:4:8 type D-2 (using 40mm graded crushed stone aggregates) as in sub base, complete all as specified and directed.

M&L for 25mm thick plain cement concrete 1:2:4 type B-0 (using 12.5mm graded crushed stone aggregates) as in leveling course, sub base or floors, finished the surface even and smooth without using extra cement, complete all as specified and directed.

M&L for 50mm thick PCC 1:3:6 type C-1 (using 20mm graded crushed stone aggregates) as in plinth protection, laid in panels not exc 2.0 Mtr long with slope in 1:3, finished the surface even and smooth without using extra cement, complete all as specified and directed.

M&L for 7-8mm thick non skid coloured ceramic tiles, area of each tile exc. 0.18 Sqm but not exc 0.36 Sqm, laid in floor, laid/ fixed over and including 15mm thick screed bed or bedding layer in CM 1:4, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles, complete all as specified and directed.

M&L for glazed ceramic coloured tiles of size 300mm x 250mm x 7mm or 450mm x 350/300mm x 7mm thick, fixed on verticle surfaces, skirtings/ dados etc. over and including 10mm thick plaster/ backing coat in CM 1:4, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles, complete all as specified and directed.

S&F powder coated (thickness of powder coating not less than 50 micron) anodised aluminium door shutters, aluminium section weighing 0.55 Kg/m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc, complete all as specified and directed.

S&F powder coated (thickness of powder coating not less than 50 micron) anodised aluminium window and ventilator shutters, fixed type without sash bar, aluminium section weighing 0.55 Kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc, complete all as specified and directed.

S&F powder coated (thickness of powder coating not less than 50 micron) anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleats for fixing etc, complete all as specified and directed.

M&L for glazing with 5mm thick tinted glass, exc 0.50 Sqm in each panel, fixed to doors, windows, ventilators and frame with suitable EPDM rubber packing / putty / wooden beadings (as required at site), complete all as specified and directed.

S&F 150mm long aluminium anodised barrel tower bolts with bright finish, complete all as specified and directed.

S&F 300mm long aluminum alloy, anodised, sliding door bolt with hasp staple (bolt type) and fixing clip of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded section or cast aluminum alloy, complete all as specified and directed.

S&F 150mm long extruded aluminium alloy handles, cast type, anodised, oval shape, complete all as specified and directed.

S&F aluminium (extruded section body) door closer hydraulically regulated, designation No. 1 universal type, suitable for door shutters upto 700mm in width and of weight not more than 35 Kg, complete all as specified and directed.

M&L for brick work with using sub class 'B' bricks, old size, straight or curved on plan exc 6 mtr mean radius, built in CM 1.6, complete all as specified and directed.

M&L for half brick work with sub Class 'B' bricks, old size, straight or curved on plan, built in CM 1:4, complete all as specified and directed.

Taking down cement plaster on brick walls, stone masonry/ walls, concrete surfaces etc. including raking out joints, hacking for key, scrubbing down with water etc., complete all as specified and directed.

M&L for 10mm thick rendering on fair faces of brick work or concrete surfaces in CM 1:6, finished the surface even and smooth without using extra cement, complete all as specified and directed.

M&L for 15mm thick rendering on fair faces of brick work or concrete surfaces in CM 1:4 with using water proofing compound, finished the surface even and smooth without using extra cement, complete all as specified and directed. Note :- WPC shall be measured and paid separately under respective item of this BOQ.

M&L for 15mm thick rendering on fair faces of brick work or concrete surfaces in CM 1:6, finished the surface even and smooth without using extra cement, complete all as specified and directed.

M&L for 5mm thick rendering in CM 1:3 as on ceiling, finished the surface even and smooth without using extra cement, complete all as specified and directed.

Supply only integral water proofing compound.

M&L for preparation of new surfaces of walls and applying two coats of cement base paint over and including a coat of chalk whiting primer, complete all as specified and directed.

M&L for preparation of new surfaces of ceiling and applying three coats of white wash, complete all as specified and directed.

M&L for preparation of new surfaces of walls and applying three coats of white wash, complete all as specified and directed.

M&L for preparation of new surfaces of walls and applying two coats of oil bound distemper over and including a coat of primer and one coat wall care white putty, complete all as specified and directed.

Taking up or down GI tubing 15mm bore including cleaning for re-fixing or removal to store, complete all as specified and directed.

Taking up or down GI tubing 20mm bore including cleaning for re-fixing or removal to store, complete all as specified and directed.

Taking up or down GI tubing 40mm bore including cleaning for re-fixing or removal to store, complete all as specified and directed.

M&L for 15mm bore GI water tubing, medium grade with all fitting and fixtures, fixed to walls or ceilngs or laid in floors, complete all as specified and directed.

M&L for 25mm bore GI water tubing, medium grade with all fitting and fixtures, fixed to walls or ceilngs or laid in floors, complete all as specified and directed.

M&L for 40mm bore GI water tubing, medium grade with all fitting and fixtures, fixed to walls or ceilngs or laid in floors, complete all as specified and directed.

S&F 1000 ltrs capacity rotational moulded polyethylene water storage tank (cylindrical vertical with closed top), white colour, three layered, ISI Marked, hoisted and fixed in position with and including necessary GI fittings, complete all as specified and directed.

S&F 15mm bore fancy type bib tap, chromium plated, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule, fixed CP wall flanges, complete all as specified and directed.

S&F ball brass valves, high pressure, with polythene float and flynut complete, screwed for 20mm bore iron pipe or brass ferrule, complete all as specified and directed.

S&F chromium plated stop/ angle valve, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for 15mm bore iron pipe or for unions, complete all as specified and directed.

S&F PVC low level flushing cistern of 10 ltrs capacity with top push button includingPVC bend long type and connecting to flush pipe of any size and pattern with inlet ball valve float and handle, complete all as specified and directed.

S&F vitreous china bowl urinal, flat back, size of 465x355x265mm white in colour, with grating and union for discharge pipe and including waste fittings & waste pipe, complete all as specified and directed.

M&L for 75mm bore sand cast iron soil, waste and vent pipes in any length with or without ears, with cement joints, laid in trenches or in floors, complete all as specified and directed.

S&F 75mm bore cast iron bends (any radius), diminishing pieces or tapers (larger bore measured) with oval access door, complete all as specified and directed.

S&F 75mm bore cast iron branch piece, single (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branches, complete all as specified and directed.

S&F vitreous china wash hand basin, oval counter type, white in colour, size 560mm x 400mm including 32mm dia CP brass waste coupling and waste pipe and fixed with suitable means, complete all as specified and directed.

M&L for 18-20mm thick polished granite stone slabs, machine cut, bedded and jointed with grey cement slurry and pointing in white cement with admixture of pigment to match with shade of granite, fixed as in steps, jambs, pillars, window cills, cooking plateforms and the like, fixed/laid over and including 15mm thick screed bed/ plaster in CM 1:4, complete all as specified and directed.

Rounding / moulding to edges (half round) of stone slabs of any type including rubbing and polishing, complete all as specified and directed.

M&L for 18/19mm thick prelaminated particle board, interior grade, prelaminated both side with decorative choice lamination, fixed with screws to timber frame work, as in cupboards, kitchen cabinets and similar work including provn of 6mm thick teal wood lipping alround the board/ shutters, complete all as specified and directed.

S&F brass magnetic catcher of size 50mm, ISI marked, suitable for cupboards and rubber wood shutters, fixed in position with stainless steel screws, complete all as specified and directed.

S&F stainless steel zero crank hinges (auto), fancy type (with Euro concealed hinges), fixed to shutters in cupboards of standard size and shape, suitable for modular kitchen, complete all as specified and directed.

S&F PVC connection of size 15mm with PTMT nuts of length 450mm, complete all as specified and directed.

S&F PVC connection of size 15mm with PTMT nuts of length 600mm, complete all as specified and directed.

S&F 150x150mm cast iron gully trap, square or rounded mouthed type 'P' with CP gratinfg, fixed with cement concrete type B-1, complete all as specified and directed.

S&F chromium plated wall mixer 2 in 1 system with provision for both as telephonic shower and overhead shower complete with wall flanges and 1 mtr long flexible shower pipe, fixed to 15mm bore iron pipe or unions, complete all as specified and directed.

S&F shower rose, brass, chromium plated, size 150x150mm, square with and including CP brass arm/bend and wall flange, fixed to 15mm bore iron pipe or union, complete all as specified and directed.

S&F chromium plated decorative soap dish of suitable size, heavy duty, fixed to wall with brass CP screws, complete all as specified and directed.

S&F chromium plated, central hole wash basin mixer, without pop-up system and including connection pipes of suitable length and size, complete all as specified and directed.

S&F PVC bathroom cabinet of size 600mm x 400mm with mirror on front door and with one towel rail for hanging towel of MS chromium plated, fixed with CP/SS screws and wooden/ PVC gutties, complete all as per specified and directed.

S&F brass CP toilet paper holder, fancy type, heavy duty, size as approved by GE, fixed with CP screws, complete all as specified and directed.

S&F stainless steel wall mount tumbler holder, chromium plated, fancy type, heavy duty, suitable for hanging bath items, fixed with SS screws, complete all as specified and directed.

S&F health faucet, brass, chromium plated with 1000mm long 8mm dia chrome finish flexible pipe with wall hook, fixed with CP/SS screws, complete all as specified and directed.

S&F corner glass shelf with chromium plated guard rails, size 225mm x 225mm, fixed with CP screws, complete all as specified and directed.

S&F 200mm dia chromium plated towel ring, fixed with SS screws, complete all as specified and directed.

S&F stainless steel wall mount towel rack with towel hooks, 600mm in size, fixed with SS screws, complete all as specified and directed.

S&F glass shelf assembly, 600mm long, consisting of 5.5mm thick sheet glass shelf, 12cm wide with chromium plated brackets, guard and railing, fixed with CP/SS screws, complete all as specified and directed.

S&F vitreous china wash down water closet pan `P` or `S` trap (pedestal pattern) white in colour, including fixing bolts and connection to drain pipe (or outgoing pipe) and to flushing pipe, antisiphonage pipe etc, complete all as specified and directed.

S&F TMT Mild steel bars 10mm dia and over, cut to length, bent to shape required including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips, complete all as specified and directed.

S&F TMT Mild steel bars 5-8mm dia and over, cut to length, bent to shape required including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips and/ or as in stirrups, spacers and binders, complete all as specified and directed.

Formwork to rough finished concrete surfaces and soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work, not exceeding 200mm thick (Horizontal or sloping), complete all as specified and directed.

M&L for reinforced cement concrete M-25 Grade (Design Mix) as in roof slabs, landings, balconies, canopy slabs etc, complete all as specified and directed.

M&L for reinforced cement concrete M-25 Grade (Design Mix) as in foundations including rafts, footings, foundation beams, plinth beams, bases for columns etc, basement slabs, under-reamed piles and mass concrete, complete all as specified and directed.

M&L for reinforced cement concrete M-25 Grade (Design Mix) as in walls, retaining walls, basement walls, ballast walls and the like, any thickness above top of footings including attached pilasters and buttresses, complete all as specified and directed.

M&L for reinforced cement concrete M-25 Grade (Design Mix) as in lintels, beams and roof beams etc, complete all as specified and directed.

Formwork to rough finished concrete surfaces of foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams and similar work, vertical or to batter, complete all as specified and directed.

Formwork to rough finished concrete sides and soffits of roof beams, lintels, beams, complete all as specified and directed.

Formwork to rough finished concrete faces of walls, retaining walls, abutments, parapets and staircase railings and similar work including attached pillasters, buttresses, etc. vertical or to batter, complete all as specified and directed.

M&L for reinforced cement concrete 1:2:4 type B-1 (using 20mm graded crushed stone aggregates) as in columns, pillars etc, complete all as specified and directed.

Cutting into existing manholes for connecting new drains (internal dia of pipe not exc 150mm), making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section ) in cement concrete 1:2:4 type B-1 (using 20mm graded crushed stone aggregate) smooth finished and reforming benching, complete all as specified and directed.

Supply and laying 150mm bore salt glazed stone ware drain pipes, Grade 'A' and jointed, complete all as specified and directed.

M&L for plain cement concrete 1:4:8 type D-2 (using 40mm graded crushed stone aggregates) as in bed to drain pipes of 150mm bore including packing under and haunching against the sides of pipes after they are laid and tested, complete all as specified and directed.

M&L for 100mm thick plain cement concrete 1:4:8 type D-2 (using 40mm graded crushed stone aggregates) as in sub base of floors or pavings, complete all as specified and directed.

M&L for 60mm thick machine pressed cement concrete interlocking paver block, glossy finish, any shape and size, confirming to IS:15658-2006, M-35 grade, complete all as specified and directed.

M&L for 100mm thick machine pressed cement concrete interlocking paver block, zig-zag type, any shape and size, confirming to IS:15658-2006, M-50 grade, complete all as specified and directed.

M&L for sand as in under floors/ paver block including spreading, leveling, watering if required, complete all as specified and directed.

M&L for mild steel framed work such as grills, gratings, side hung gates, gates (ornamental and intricate design) etc. including all necessary fittings, with ends of bars, shouldered and/ or riveted or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walkways, railings, staging for water tanks and similar work, conforming to Fe-290, Gde-E-165, complete all as specified and directed.

M&L for preparation of new steel or iron surfaces of any description, exceeding 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer, complete all as specified and directed.

Demolition of reinforced cement concrete of any description and in any position, not otherwise specifically provided for, complete all as specified and directed.

Demolition of cement concrete (un-reinforced) as in ground floor and pavings, not exc 15cm in thick below or above ground level, complete all as specified and directed.

M&L for mild steel work for bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required, hooks (stay), heavy, for large gates, hook and pintle hinges, large hasps and staples, chains, hand made sliding bolts, clamps, hold fasts, wall ties, hooks for hanging fans, plain angle cleats for securing purlins to wood trusses or rafters, knee piece inserts, two way and three way straps, plate washers and similar small articles conforming to Fe-290 Gde-E-165, complete all as specified and directed.

M&L for 18-20mm thick machine cut kota stone slab as in flooring, laid over and including 15mm thick screed bed or bedding layer in CM 1:4, jointed and pointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing, complete all as specified and directed.

All as per serial item No. 94.00 here-in-above but as on steps, risers, skirtings, pillars or on verticle surfaces.

S&F sink, made out of stainless steel sheet 1.0mm thick, suitable for manger, kitchen or laboratory with plugs, washers, overall size 30'' x 18'' with bowl size 28'' x 16'' x 9'' with and including 32mm dia CP brass waste coupling with PVC waste pipe of suitable length, fixed with suitable means and making good to disturbed surfaces to match with existing surfaces and connecting, complete all as specified and directed.

M&L for forming 12mm thick expansion joints in 100mm thick cement concrete pavement/ hardstanding, filled with pre-formed bituminous filler and top 30mm primed and sealed with sealing com pound Grade ‘A’, complete all as specified and directed.

M&L for 100mm thick plain cement concrete 1:2:4 type B-1 (using 20mm graded crushed stone aggregates) as in floors and finished the top surface of concrete by brooming and including necessary formwork as required at site, complete all as specified and directed.

M&L for priming the roof surface with bituminous primer @ 0.30 litre/Sqm and applying a coat of semi hot blown 85/25 grade bitumen @ 1.20 KG/Sqm. Thereafter laying polymeric membrane, five layered of weight not less than 3.0 KG/Sqm with centre layer core of 90 micron high molecular density polyethylene film and bonded completely to the surface with overlap of 10cm (overlap to be thermofused by flame) followed by another coat of semi hot blown 85/25 grade bitumen @ 0.70 KG/Sqm blinded with fine sand in dry condition @ 0.50 KG/Sqm including dismantling existing complete roof treatment, complete all as specified and directed.

M&L for point wiring (concelaed type) using approved colour coding as per IS (red, black & green for single phase circuit) with multi-stranded copper conductor 1.5 Sqmm nominal cross section area, single core, PVC insulated and unsheathed FRLS cable, 1100 Volts grade, in and including medium grade PVC conduit pipe of dia not less than 25mm with all necessary accessories, concelaed in wall/ floor/ roof etc. with terminated to new pressed flush metal box and readily available and cover plates (as required), suitable for mounting modular switches, sockets, fan regulators etc. and PVC insulated multi-stranded copper conductor 1.5 Sqmm nominal cross section area, single core, FRLS cable as earth continuity conductor to common earth and connecting to earth dolly, complete all as specified and directed for the followings :-

One light point, controlled by one single pole switch.

One exhaust point, controlled by one single pole switch.

One 3 Pin 5 Amps modular socket on independent board.

One 3 Pin 5 Amps modular socket on same board.

M&L for point wiring using approved colour coding as per IS (red, black & green for single phase circuit) with multi-stranded copper conductor 2.5 Sqmm nominal cross section area, single core, PVC insulated and unsheathed FRLS cable, 1100 Volts grade, in and including medium grade PVC conduit pipe of dia not less than 25mm with all necessary accessories, concelaed in wall/ floor/ roof or on surface of wall/ ceiling etc. with terminated to new pressed flush metal box and readily available and cover plates (as required), suitable for mounting modular type switches, sockets etc. and PVC insulated multi-stranded copper conductor 2.5 Sqmm nominal cross section area, single core, FRLS cable as earth continuity conductor to common earth and connecting to earth dolly for 5 Pin 6&15 Amps modular socket, complete all as specified and directed.

M&L for point wiring using approved colour coding as per IS (red, black & green for single phase circuit) with multi-stranded copper conductor 4.0 Sqmm nominal cross section area, single core, PVC insulated and unsheathed FRLS cable, 1100 Volts grade, in and including medium grade PVC conduit pipe of dia not less than 25mm with all necessary accessories, concelaed in wall/ floor/ roof or on surface of wall/ ceiling etc. for geyser / water heater and PVC insulated multi-stranded copper conductor 4.0 Sqmm nominal cross section area, single core, FRLS cable as earth continuity conductor to common earth and connecting to earth dolly, complete all as specified and directed.

S&F single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB of 20 Amps, 240 Volts, complete all as specified and directed.

S&F modular switch, one module, one way, 5/6 Amps, single pole, complete all as specified and directed.

S&F modular socket outlet 6 Pin, 5 Amps, flush type, complete all as specified and directed.

S&F modular socket outlet 5 Pin, 6 & 16 Amps, 2-in-1, multipurpose, complete all as specified and directed.

S&F modular switch, one module, one way, 16 Amps, single pole, complete all as specified and directed.

S&F ceiling rose, 3 terminal, PVC / polycarbonate isolated body, complete all as specified and directed.

S&F LED light fitting 20 Watt, high quality materials and design. Extruded aluminium housing enhances safety with high quality PC diffusers, reliable and robust housing structure, maximize the endurance over the life time, slim integrated design, easy to install, efficacy : 110 Im/W and also available in warm white and natural white complete making all connection using 1.5 Sqmm copper conductor multistranded PVC insulated twin core flexible cable from ceiling rose to LED light, complete all as specified and directed.

S&F of LED Light fitting 10 Watt, Trimline Neu is a robust and high performance batten. The LED luminaire comprises of extruded channel in thermally conductive material. High translucent serrated milky white diffuseris used to get glare free and smooth light distribution. Efficacy : 110 Im/W. Also available in warm white and natural white complete making all connection using 1.5 Sqmm copper conductor multistranded PVC insulated 2 core flexible cable from ceiling rose to LED fitting, complete all as specified and directed.

S&F of LED Light fitting 5 Watt Trimline Neu is a robust and high performance batten. The LED luminaire comprises of high translucent serrated milky white diffuseris used to get glare free and smooth light distribution. Efficacy : 100 Im/W. Also available in warm white and natural white complete making all connection using 1.5 Sqmm copper conductor multistranded PVC insulated 2 core flexible cable from ceiling rose to LED fitting, complete all as specified and directed.

S&F 35 Watt LED security light fitting with ASTRA NEO street light, made up of pressure die-cast housing with toughened glass and high power LED's with secondary optics and IP-66 protection and with 0.60 mtr long 20/25mm dia (as per manufacturer's standard) GI Pipe light grade in 45 degree bend shape and necessary clamping devices of suitable size, complete all as specified and directed.

S&F factory made MCB metalic distribution board, 8 way, double door, 230 Volts, IP-43 protection, concealed flush to wall for mounting MCBs, conforming to IS:13032, fabricated out of CRCA sheet, fitted with DIN channel, neutral link and appropriate bus ba, DB shall be semi glossy finished with epoxy polyster based powder paint, sprayed and backed at high temperature, between powder paint process to ensure smooth finish and protection against corrosion. The DB shall be double door type with hinged door and locking arrangement. The DB shall be of same make of MCBs and have label marking indicating the incoming and outgoing circuits on all ways, complete all as specified and directed.

S&F MCB 63 Amps, SPN, 'B' series, 240 Volts, 50 Hz, 10 KA, complete all as specified and directed.

S&F MCB, SP, 6-32 Amps, 'B' series, 240 Volts, 50 Hz, 10 KA, complete all as specified and directed.

S&F electric water heater, storage type steel body with copper inner tank and heating element upto 2 KW, capacity 25 litres, BEE 5 Star rated complete with all accessories such as safety valve, thermostate, NRV, connection piece etc, fixed to wall with brass fastners of suitable length, complete all as specified and directed.

S&F exhaust fan, steel body, AC, single phase, 230 Volts of size 300mm sweep with frame and louvers, complete all as specified and directed.

M&L for earthing complete with galvanized steel earth plate electrode of size 600x600x6mm thick, buried directly in ground (earth pit not less than 2.25 mtr deep below ground level) with top edge of the plate not less than 1.5 Mtr below normal ground level, connected to earth lead wire of Gl wire 4mm dia by means of nuts, bolts and washers, check nuts of galvanized iron or steel including 15mm dia GI pipe light grade upto 1.5 mtr below GL as in protection pipe and including excavation, earth work, charcoal dust, common salt, PCC 1:3:6 type C-1 chamber with RCC cover in cement concrete 1:2:4 type B-1 (using 20mm graded stone aggregate), reinforced with 6mm dia round bars @ 75mm c/c both way with MS handle 12mm dia, PGI funnel and wire mesh, connected to earthing test point, complete all as shown in electrical plate No. 5 of SSR Part-l and testing on completion, complete all as specified and directed.

Supply, laying & testing XLPE insulated screened PVC bedded, galvanized steel strip or wire armored, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 10 Sqmm 2 Core, laid in trenches or floor or passing through GI pipe, complete all as specified and directed.

M&L for dry river sand as cushioning to underground cable with a layer of sand of 8cm thick before laying the cable and 15cm thick after laying cable and stretching the cable, complete all as specified and directed.

Supplying and laying un-reinforced precast concrete cable cover, class LV, type-I, flat of size 250mm x 150mm x 40mm, complete all as specified and directed.

M&L for 40mm bore GI tubing, light grade with all fitting (as required) for protection of underground LT cable including cutting of road surface/ pavement wherever required and making good to disturbed surface to match with existing surface, complete all as specified and directed.

JOGINDER SINGH (BID ID -3174749)

M/S SUSHEEL KUMAR Govt. CONTRACTOR (BID ID -3183775)

M/S GURU DEV BUILDERS (BID ID -3179282)

HANS RAJ SHARMA (BID ID -3178789)

paras ram pachiala (BID ID -3179026)

SINGH CONST CO (BID ID -3177283)