Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹10.7 LAccepted-AOC | ₹10.7 L | L1 | Accepted-AOC Accept |
| 2 | L2₹10.7 LRejected-AOC C 2 411 VIBHAV KHAND GOMTI NAGAR LUCKNOW | LUCKNOW | LUCKNOW | UTTAR PRADESH | ₹10.7 L | L2 | Rejected-AOC Accept |
| 3 | Rejected-Technical | - | - | Rejected-Technical required technical condition not full fill by the firm |
| 4 | Rejected-Technical 123A U P SINGH COLONY VAN VIHAR ROAD KANHAIPUR JAUNPUR U P | JAUNPUR | JAUNPUR | UTTAR PRADESH | - | - | Rejected-Technical REQUIRED TECHNICAL CONDITION NOT FULLFILL BY THE FIRM |
Tender Value
₹10.8 L
EMD Value
₹22,000
Closing Date
27 Apr 2026, 3:00 pmClosed
PROJECT MANAGER
Indra Puri Near Police Chauki, Bhola Kheda Lucknow
CONSTRUCTION OF BORING AND SUBMERSIBLE PUMP WORK , PRADHAN MANTRI MICRO FOOD PROCESSING INDUSTRIES SCHEME (PMFME) AT ALIGANJ LUCKNOW (U.P)
2026_UPPRC_1137940_1
01/PCL/PM/UNIT-8/2026-27/Dated 16-04-2026
Open Tender
Civil Works
Percentage
30 days
LUCKNOW
Please refer Tender documents.
2 documents required · 2 mandatory
₹5,900
₹22,000
31 Jul 2026
17 Apr 2026
27 Apr 2026
17 Apr 2026
27 Apr 2026
17 Apr 2026
This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 0.00_) | Boring/drilling bore well of required dia for casing/ strainer pipe, by suitable method prescribed in IS: 2800 (part I), including collecting samples from different strata, preparing and submitting strata chart/ bore log, including hire & running charges of all equipments, tools, plants & machineries required for the job, all complete as per direction of Engineer -in-charge, upto 90 metre depth below ground level. | - | - | - | - |
| 0.00_) | 400 mm dia | - | RM | - | - |
| 0.00_) | beyond 90 metre & upto 150 metre depth below ground level. 400 mm dia (Rocky strata including Boulders) | - | RM | - | - |
| 0.00_) | Supplying, assembling, lowering and fixing in vertical position in bore well, ERW (Electric Resistance Welded) FE 410 mild steel screwed and socketed/plain ended casing pipes of required dia, conforming to IS: 4270, of reputed & approved make, including painted with outside surface with two coats of anticorrosive paint of approved brand and manufacture, including required hire & labour charges, fittings & accessories, all complete, for all depths, as per direction of Engineer-in-charge. 150 mm nominal size dia having minimum wall thickness 5.00 mm | - | RM | - | - |
| 0.00_) | Supplying, assembling, lowering and fixing in vertical position in bore well, ERW (Electric Resistance Welded) FE 410 plain slotted (having slot of size 1.6/3.2 mm) mild steel threaded and socketed/ plain bevel ended pipe (type A) of required dia, conforming to IS: 8110, of reputed and approved make, having wall thickness not less than 5.40 mm, including painted with outside surface with two coats of anticorrosive bitumestic paint of approved brand and manufacture, including hire & labour charges, fittings & accessories, all complete, for all depths, as per direction of Engineer -in-charge. 200 mm nominal size dia | - | RM | - | - |
| 0.00_) | Gravel packing in tubewell construction in accordance with IS: 4097,including providing gravel fine/ medium/ coarse, in required grading& sizes as per actual requiremnt, all complete as per direction ofEngineer-in-charge | - | CuM | - | - |
| 0.00_) | Development of tube well in accordance with IS : 2800 (part I) and IS: 11189, to establish maximum rate of usable water yield without sand content (beyond permissible limit), with required capacity air compressor, running the compressor for required time till well is fully developed, measuring yield of well by "V" notch method or any other approved method, measuring static level & draw down etc. by step draw down method, collecting water samples & getting tested in approved laboratory, i/c disinfection of tube well, all complete, including hire & labour charges of air compressor, tools & accessories etc., all as per requirement and direction of Engineer-in-charge.. | - | Hrs. | - | - |
| 0.00_) | Providing and fixing suitable size threaded mild steel cap or spot welded plate to the top of bore well housing/ casing pipe, removable as per requirement, all complete for bore well of: 200 mm dia | - | No | - | - |
| 0.00_) | Providing and fixing M.S. clamp of required dia to the top of casing/ housing pipe of tube well as per IS: 2800 (part I), including necessary bolts & nuts of required size complete. 200 mm dia | - | No | - | - |
| 0.00_) | Providing and fixing Bail plug/ Bottom plug of required dia to the bottom of pipe assembly of tube well as per IS:2800 (part I). 200 mm dia | - | No | - | - |
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.51 MB
technicalbid.pdf
Tender Documents • 3.23 MB
BOQ_2124753.xls
BOQ • 0.25 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at [email protected].