PROVN OF ALUMINIUM WINDOWS IN LIEU OF STEEL WINDOW IN SAILORS MARRIED ACCN, PROVN OF CHEQURED TILES FOR BMW SEGREGATION SHED AT MDC, ADDN/ALTN OF GROUND FLOOR TOILETS AT HQ NTG UNDER GE (NORTH) BANGALORE

Amount

Demolition of cement concrete (un-reinforced ) of any description & in any position not specifically provided for complete etc all as specified and as directed

Taking down chowkats or frames with shutters (without taking off shutter from frames) not exc. 1.5 sqm each including making good to match with the adjoining surfaces etc complete all as specified and as directed

Taking down chowkats or frames with shutters (without taking off shutter from frames) exc. 1.5 Sqm but n exc 4.0 Sqm each including making good to match with the adjoining surfaces etc complete all as specified and as directed

Taking down cement plaster of any description hacking for key or raking out joint on old brick ork/stone/concrete surface etc complete all as specified and as directed

M&L for cement concrete (1:2:4) type B-0 using 12.5 mm graded crushed stone aggregates as in 25 mm thick sub base of flooring etc complete all as specified and as directed

M&L for cement concrete (1:4:8) type D- 2 using 40mm graded crushed stone aggregate as in 75 mm thick sub base to flooing etc complete all as specified and as directed

M&L for Machine cut kota stone slab 18-20mm thick, (table rubbed) (moulded exposed edge), as equilavent to riser length (one piece) as in riser and steps, skirting, dado, fixed over & including 10 mm thick in cement mortar 1:3 backing coat, jointed with grey cement slurry mixed with pigment to match the shade of the slab including grinding the edges as in half round incl rubbing and polishing incl dismantling floor, hearth or wall tiling etc complete all as specified and as directed

M&L for 18 to 20mm thick Green Marble (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including grinding the edges half round and polishing including, laid over 15mm thick screed bed in cement mortar 1:6 etc complete all as specified and as directed

M & L for Non - skid Ceramic coloured tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over & including 15 mm thick screed bed in cement mortar 1:6 etc complete all as specified and as directed

M&L for Sand Cushioning 50mm thick for laying Paver Block including watering, ramming etc complete all as specified and directed

M&L for machine presssd pre-cast concrete interlocking coloured paver Block 60 mm thick, glass fibre reinfroced glossy finished, vibro compacted any shape and size confirming to IS-15658-2006 , M-35 grade to match with grey cement and pigment etc complete all as specified and as directed

M&L for cement concrete designer chequered tiles of size 30cm x 30cm x 25mm thick, exterior grade, coloured glossy finish, rubber pressed, set, jointed and pointed in neat cement slurry with grey cement and pigment to match the shade / colour / matrix of tiles as in floor over & including 15mm thick screed bed in cement mortar 1:6 including dismantling floor, hearth or wall tiling etc complete all as specified and as directed

M&L for Stone Masonry squared rubble Walling, uncoursed well bonded, bedded and solidly hearted, built in cement mortar (1:6) etc including demolition of brick Work / Stone Masonry/PCC block masonry built in cement mortar of any description all as specified and directed.

M&L for Keyed pointing to random or polygonal rubble, uncoursed or brought upto course in CM (1:4) etc complete all as specified and as directed

M&L for Keyed pointing to random or polygonal rubble, uncoursed or brought upto course in CM (1:4) including raking out joints/ pointing to masonry in single detached joints for flashing, etc complete all as specified and as directed

M&L for rendering 10 mm thick in cement mortar (1:6) on fair faces of brick work or concrete surface finsihed even and smooth without using extra cement etc complete all as specified and as directed

M&L for Plain cement concrete (1:2:4) type B0 (12.50mm graded crushed stone aggregate) in copings, parapets and railing upto 60cm height, leveling concrete for Roof slab, kerbs, water troughs/Chajjas and the like including weathering, slightly rounded or chamfered angles and throating as directed

M&L Framed work such as grills, gratings etc., with ends of bars shouldered and/or riveted, or forget into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe 290-0 or Fe -E-165 etc complete all as specified and as directed

S&F Aluminium frame for doors, windows ventilators duly Powder Coating (minimum thickness of powder coating 50 micron) with one or more rebates including joining cleat for fixing etc. complete all as specified and as directed

S&F Aluminium window and ventilator shutters duly powder Coating (minimum thickness of powder coating 50 micron), fixed type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc. complete all as specified complete all as specified etc. complete shall as specified and as directed

S&F sheet glass 4mm thick of ordinary quality and glazing with oil putty or wooden beading to wooden frame or steel frame in squares not exceeding 0.50 sqm in each pane complete all as specified and as directed

S&F sheet Figured glass 4mm thick, pin head type and glazing with oil putty in squares in not exc 0.5 sq.m in each pane etcc omplete all as specified and as directed

S&F stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperature 1.40 mm and fixed with stainles steel wire stapel etc complete all as secified and as directed

Complete removal exising treatment (External/Internal wall /Ceiling) by means of wire brushing, sand paper, manually or mechanically up to visible of plastered surface incl rubbing and washing etc complete all as specified and as directed

M&L for preparation of wall surface with sand paper etc and applying 1mm thick wall care putty including finishing to smooth surface etc complete all as specified and as directed

M&L for Preparing new plastered suface of walls and applying two coats distemper acrylic emulsion, white or tinted over a coat of primer etc complete all as specified and as directed

M&L for Preparing Old plastered suface of walls and applying two coats distemper acrylic emulsion, white or tinted over a coat of primer etc complete all as specified and as directed

M&L for Preparation of new or previously un-treated steel and iron surfaces of any description, over 10 cm in width or girth , not otherwise described and painting with two coats of synthetic enamel paint over a coat of red oxide primer etc complete all as specified and as directed

S&F in repairs stainless steel decorative curtain rod of 25 mm bore with wood finishes including fancy finale caps cap (02 nos in each curtain rod) etc complete all as specified and as directed

S&F in repair Brass Chromium Plated designer Bracket for curtain rod of dia 25 mm dia made out of SS Flat not less than 20 mm wide 1.50 mm thick and overall length not less than 160 mm fixed with screws min 2 Nos with Rawl Plug of size not less than 50 mm long etc complete all as specified and as directed

Removing building materials etc. to a distance of exc 1.0 Km but not exc 1.50Km , including loading, unloading and stacking at the destination etc complete all as specified and as directed

M&L for Granite (of any type) 18-20mm thick work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including grinding the edges half round and polishing laid over & including 15mm thick screed bed in cement mortar (1:6) etc complete all as specified and as directed Notes : (i) Colour of granite stone slab shall be Z black or any colour approved by GE (ii) All around edges of granite shall be grinding as half round including polishing etc. Nothing extra shall be admissible on this account. (iii) Work to be carried out in family qrtr. Hence, necessary safety arrangements to be adhered by Contractor.

M&L for PCC (1:3:6 ) type C-1 using 20 mm graded crushed stone aggregates as in 75 mm thick plinth protection etc, finished even and smooth without using extra cement including joints filling with sealing compound Grade "A" complete all as specified and directed.

M & L for Non - skid ceramic coloured tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over & including 15 mm thick screed bed in cement mortar (1:6) including dismantling floor, hearth or wall tiling etc complete all as specified and as directed

M&L for screed bed or bedding layer 20mm thick in cement mortar (1:6) for laying floor finishes complete all as specified and as directed.

M&L for cement concrete designer chequered tiles of size 30cm x 30cm x 25mm thick, exterior grade, coloured glossy finish, rubber pressed, set, jointed and pointed in neat cement slurry with grey cement and pigment to match the shade / colour / matrix of tiles as in floor etc. complete all as specifed and as directed

M&L Glazed ceramic coloured tiles 300X450X7mm/300X600X7mm thick as in skirting / dado, set and jointed in neat cement slurry and pointed in white or colour cement to match including backing coat 10 mm thick in cement mortar (1:4) including dismantling floor, hearth or wall tiling etc complete all as specified and as directed

M&L for 18 to 20mm thick granite Granite stone slab (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite slab including grinding the edges half round and polishing including demolition of stone slab (Laid bedded and pointed in any cement) etc complete all as specified and as directed

M&L Pre-cast Cement concrete (1:3:6) type C-1 using 20 mm graded crushed stone aggregates as in solid block masonry exceeding 10 cm in width and setting in CM 1:6 including demolition of brick Work / Stone Masonry/PCC block masonry built in cement mortar of any description all as specified and directed.

M&L for Pre-cast cement concrete (1:2:4) type B1 using 20 mm graded crushed stone aggregate as in landings, cover slab (for manholes etc) and similar work including necessary form work and set in CM 1:6 etc including demolition of existing RCC Slab of any description and in any position etc complete all as specified and directed.

M&L for TMT bars 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia, or securing with clips etc complete all as specified and as directed

M&L for rendering over fair faces of ceiling concrete surfaces, 5 mm thick in CM (1:3) finished even and smooth without using extra cement etc complete all as specified and as directed

M&L for rendering 15 mm thick in cement mortar (1:4) on other than fair faces of brick work or concrete/stone masonry surface finsihed even and smooth without using extra cement mixed with water proofing compound etc complete all as specified and as directed (Notes : WPC shall be measured and paid seperately)

M&L for providing water proofing treatment to sunken portion of WCs, bathroom etc by applying cement slurry mixed with two component Elastomeric Acrylic based polymer modified cementitious composite compound coating including taking down existing treatment with PCC as in sunken protion of WC and removing beyond the premises of site. The following procedures shall be adopted during the execution of work :- (i) First layer of slurry of cement @ 0.488 kg/sqm mixed with Acrylic based polymer modified cementitious composite compound @ 0.253 kg/sqm. The layer will be allowed to air cure for 4 hours. (ii) Second layer of slurry of cement @ 0.242 kg/sqm mixed with with Acrylic based polymer modified cementitious composite compound @ 0.126 kg/sqm. The layer will be allowed to air cure for 4 hours followed with water curing for 48 hours. (iii) 20mm thick screed in cement mortar 1:3 mixed with liquid water proofing compound. (iv) Provide 40mm dia light grade GI spout at the lowest point with 30cm projection beyond the out face of the wall. Notes : (i) Depth of sunken slab exceeding 0.3m but not exceeding 0.6m (ii) Vertical surfaces all around sunken portion also considered for payment purpose (iii) Quoted rate includes removing of debris exc 100m but not exc 1KM

Supply only liquid water proofing compound, ISI marked, complete all as specified and as directed.

S & F for solid PVC frame (Single Rebated) of size 47mm x 30mm made out of solid PVC foam with homogenous fine cellular structure having smooth outer integral skin with suitable metal stiffner and fixed with 100 x 8 sheet metal CSK screws complete as sepecified and directed Note :- Door frame shall be water proof, termite proof, elegant and should have excellent screws holding strength to fix hinges and hold doors properly for a long life

S&F factory made solid PVC moulded door shutter with wood free EPS, 28 to 30mm thick (Stiles) with 2, 4 or 6 raised panel design with 2mm thick moulded prelam PVC sheet on the front face and 2mm plain colour PVC sheet on back face etc. complete all as specified and as directed.

S&F Aluminium anodised tower bolt 200 mm long of extruded section etc complete all as specified and as directed

S&F Butt hinges 100 mm size, Stainless steel medium weight and fixed etc complete all as specified and as directed

S&F Aluminium handle 150 mm size cast type, anodised etc complete all as specified and as directed

S & F in repair vitreous china wash down water closet pan (Pedestal Pan) white including Plastic water closet seat (black) closed pattern with flat bottom and cover and mild steel chromium plated or aluminium hinging device including fixing bolts, flush pipe anti syphonage pipe etc complete all as specified and as directed

S&F in repairs vitreous china wash basin white, flat back, size 550 x 400mm excluding taps, waste, chain & plug and porcelain stopper but including brackets, 32 mm bore stainless steel waste coupling and LDPE pipe 600 mm long waste pipe complete all as specified and directed.

S&F in repairs Viterous China urinals, full stall type white, complete including providing and fixing plugs, beddings urinal against wall in cement mortar (1:2), securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; including 40 mm dia PVC waste pipe 610 mm long and PVC connection 450 mm long, flush pipe, grating and Union for discharge pipe etc complete all as specified and as diected

S&F in repair PVC flushing cistern with flush out valve low level of 10 Ltr capacity white with inlet ball valve, float, flushing bend & handle including brackets, etc complete all as specified and as directed

S&F in repair 15mm Bib taps, Fancy type, brass Chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule etc complete all as specified and as directed

S&F PVC connection with PTMT nuts 600mm long 15mm dia complete all as specified and as directed

S&F in repair Pillar taps fancy type 15mm dia cast copper alloy, with capstan heads, chromium plated,screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts,screwed for iron pipe and fixed as specified and directed.

S&F in repair Angle / Stop cock 15mm dia Fancy type cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed etc complete all as specified and as directed

S&F in repairs Bathroom Cabinet Mirror of moulded PVC of size 431.80mm x 355.60mm including fixing to wall as directed.

S&F in repairs stainless steel Towel rail 450 mm long including fixing arrangement etc complete all as specified and as directed

S&F in repairs stainless steel towel ring including fixing arrangement etc complete all as specified and as directed

S & F CPVC pipes 20mm dia SDR 11 & Plain CPVC SDR 11 fittings on walls/ ceiling or laying in floors including taking down existing GI/CPVC pipe line etc complete all as specified.

S & F CPVC pipes 25mm dia SDR 11 & Plain CPVC SDR 11 fittings on walls/ ceiling or laying in floors including taking down existing GI/CPVC pipe line etc complete all as specified.

S&F in repairs rotational moulded polythene water storage tank (cylindrical vertical with closed top) 1000 ltrs triple layered, hoisted and fixed in position all as specified in SSR part I capacity of tank including 25 mm dia float ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic etc complete all as specified and directed

S & F in repairs gun metal, globe or gate valve 25 mm dia with iron wheel head screwed both ends for iron pipe and including taking down old gate valve all as specified and as directed.

S&F in repairs PVC (SWR) Multi floor trap 75 mm dia outlet, plain with grating including jointing with solvent cement etc complete all as specified and as directed

S&F PVC SWR pipes, 110 mm dia single socketed in any length with rubber ring joint laid in trenches including dismantling of existing pipe line and fittings etc complete all as specified and directed

S&F PVC SWR pipes 110 mm single socketed in any length with rubber ring joint fixed on walls etc including dismantling of existing pipe line and fittings etc complete all as specified and directed

S&F 75 mm PVC, SWR pipes, single socketed in any length with rubber ring joint laid in trenches including dismantling of existing pipe line and fittings etc complete all as specified and directed

S&F PVC SWR pipes 75 mm single socketed in any length with rubber ring joint fixed on walls including dismantling of existing pipe line and fittings etc complete all as specified and directed

S&F PVC (SWR) bends (any radius) 110 mm dia complete all as specified and as directed

S&F PVC (SWR) bends (any radius) 110 mm dia with access door etc complete all as specified and as directed

S&F PVC (SWR) Junction (Single T) equal or unequal 110 mm dia etc complete all as specified and as directed

S&F PVC (SWR) Junction (Single T) equal or unequal with access door 110 mm dia etc complete all as specified and as directed

S&F PVC (SWR) bends (any radius) 75mm etc complete all as specified and as directed

S&F PVC (SWR) bends (any radius) with acess door 75mm etc complete all as specified and as directed

S&F PVC (SWR) Junction (Single T) equal or unequal 75mm dia etc complete all as specified and as directed

S&F PVC (SWR) Junction (Single T) equal or unequal with access door 75 mm dia etc complete all as specified and as directed

S&F PVC SWR branch pieces, single (equal or unequal), Single Y equal or unequal 110 mm dia etc complete all as specified and as directed .

S&F PVC SWR branch pieces, single (equal or unequal), Single Y equal or unequal 75mm dia etc complete all as specified and as directed .

S&F in repairs PVC (SWR) vent cowls 110 mm dia bore

S&F PVC (SWR) vent cowls 75 mm dia bore

M&L for preparing newely plastered ceiling surface and applying three coats of white wash etc complete all as specified and as directed

M&L for Preparing Old ceiling surface and applying one coat of white wash etc complete all as specified and as directed

Surface excavn not exceeding 30 cm deep and average 15cm deep and getting out hard/dense soil complete all as specified and as directed

Removal of excavated soil to a distance not exc 50 m and depositing where directed at a level not exc 1.5 m above the starting point complete all as specified and as directed

M&L for Hard core of broken stone of gauge not exceeding 63mm, deposited, spread and levelled in layers not exceeding 15cm thick watered and well rammed to a true surface all as specified and as directed

M&L for Chequered cement concrete tiles with grey cement and pigments 30cm x 30cm x 25 mm thick, set, jointed and pointed in neat cement slurry as in floor/path etc all as specified and as directed

M&L Cement Concrete (1:2:4) type B1 using 20mm graded stone aggregate as in lacing courses, string courses, slightly rounded or chamfered angles and throating all as specified and as directed

Excavation in trenches not exc 1.5m wide and not exc 1.5m in depth, for foundation, etc .or for shafts,wells,cesspits,manhole, pier holes, etc. n exc 10 sqm on plan and not exc 1.5m in depth and getting out hard/dense soil complete all as specified and as directed

Returning filling in soil incl spreading levelling watering and well ramming in layers not exc 25 mm thick in hard/ dense soil complete all as specified and as directed

M & L for cement concrete (1:4:8) type D2 using 40 mm graded crushed stone aggregate in foundation filling and mass concrete all as specified and as directed

M&L for Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter surface to be fair finished flat surfaces complete all as specified and directed.

M&L for Plain cement concrete (1:2:4) type B1 using 20mm graded agg as in 40 mm thick flooring finished even and smooth using extra cement all as specified and as directed

M&L for rendering 10 mm thick in CM (1:4) on fair faces of brick work or concrete surface finsihed even and smooth without using extra cement etc complete all as specified and as directed

M&L for Mild Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes confirming to IS- 4923 all as specified and as directed

M&L for rolled mild steel sections Fe-410-W (grade E-250 quality A) as in main and cross beams, hip and jack rafters,purlin where connected to common rafters and running rails and guides for sliding door fixed with angle cleats or other connecting plates comple all as specified and directed

Excavating in post holes(or similar holes) each not exceeding 0.5 cum getting out in Hard / Dense soil soil,returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm thick etc complete all as specified and as directed

S&F Pre-painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 MPA, 150AZ as in roof covering/ cladding to wall, fixed with self tapping screws etc complete all as specified and as directed

M & L for Pre-painted galvatume aluminum zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 MPA, 150AZ as in roof covering/ cladding to wall, fixed with self tapping screws etc complete all as specified and as directed

M&L PCC (1:5:10) type E-2 using 40mm graded stone aggregate as in filling in sunken slab or similar work complete all as specified and as directed

M & L for Preparation of newly plastered wall surfaces and applying two coats of cement based paint over a coat of primer all as specified and as directed

MAA ENGINEERING SERVICERS (BID ID -3259180)