AnganwadibuildingMaddurcolonyM

Amount

Construction of Anganwadi Building @ Maddur Colony in Maddur Panchayat in Tiruttani Panchayat Union.

Earth work excavation and depositing on bank with initial lead and lift in gravelly soil stiff in sub soil and hard soil with etc,.As per SS20B

Supplying and filling foundation and basement with filling sand in layers notmore than 15cm thickwellrame,watered and compacted with standared specification etc,.complete.

Filling in Basment with Excavated earth in layer of not more than 15cm thickwell ramed watered and consolidered complying with standared specification etc,.complete.

Plain Cement Concrete 1:4:8 mix using 40mm HBG metal from an approved quarry it from an site including cost and conveyance and materials of labour charges etc,.complete.

Brickworkin CM1:5 Mix using C,bricks size of 23x11x75cm for following including cost and conveyance and materials of all labour charges with complying,curing with standared specification etc,.

Brickworkin CM1:5 Mix using C,bricks size of 23x11x75cm for following including cost and conveyance and materials of all labour charges with complying,curing with standared specification etc,.

Supplying and Erecting for centering for sides and soffits including necessary supports and strutting upto 3.29mheight for plane surface in all floors with all cross bracing complete with standared specification etc,.

Above Basement

Supplying and fabrication and placing position MS steel or Ribbed tor steel for all RCC works as per the design including necessary supports (MSRod or RTS bar will be supplied department) including binding wire charges etc,.

Cement Concrete 1:2:4 using 20 mm ISS HBG metal for all RCC item of works excluding cost of reinforcement and fabricating charges, centering and shuttering but icluding curing and providing fixtures like fan clamps in the RCC floor or roof s

RCC 1:1.5:3 Mixusing 20mm HBG metal for all RCC worksexcluding cost and fabrication of reinforcement grill including cost and conveyance and materials of all labour charges etc,.complete.

RCC 1:1.5:3 Mixusing 20mm HBG metal for all RCC worksexcluding cost and fabrication of reinforcement grill including cost and conveyance and materials of all labour charges etc,.complete.

Paving the floor with best quality Vertified Tiles of size 600 x 600 x 8mm of approved colour, shade and quality laid in cement mortar 1:3 (one cement and three crushed stone M.Sand) 20mm thick in all floors and the top pointed with the white cement mixed same colour pigments etc., complete complying with standard specification. (The make and brand of the tiles should be got approved by Executive Engineer before use on works)

Dadooing walls with glazed tiles of any colour and any size laid in CM 1:2 mix using 20mm thick and poiting with white cement 0.40kg per 10sq.mt mixed with colouring pigment including labour charges etc,.

Providing Granolithic pattern floor finish with CC 1:2:4 mix using 10to 12mmchips metalincluding cost and conveyance and materials of all labour charges etc,.complete.

Finishing the exposedsurface of RCC item of work such as slabs,beams,sunshade,and canopy slab with CM 1:3 mix using 10mm thick including cost and conveyance and labour charges etc,.complete.

Plastering with in CM 1:5mix using 12mm thickincluding cost and conveyance and materials of all labour charges etc,.complete.

Distempering two coats using best freshly burnt shell lime in all the floors including cost of lime,Blue,fevicol type gum,brushes scaffolding charges with all labour charges with standared specification etc,.complete.

Exterior Emulsion Paint two coats using best freshly burnt shell lime in all the floors including cost of lime,Blue,fevicol type gum,brushes scaffolding charges with all labour charges with standared specification etc,.complete.

Painting two coats with approved ready enamel paint with Doors, Rolling shutter,grill gate and windows paint including cost and conveyance and materials of alllabour charges etc,.complete.

Supply of steel doors 0.90X2.10m

Supply of steel doors 0.75X2.10m

Supply of steel doors 1.00X2.10m

Supply of steel doors 1.10X2.10m

Supply of steel Windows 1.20X1.30m

Supply and fixing of Cuddappa slab including cost and conveyance of cuddappa slab and labour charges for fixing etc, complete.

Paving the Top of roof with Solar reflective ceramic tiles of size 305 x 305 x 7mm thick of approved quality and colour laid in Cement mortar 1:3 (One cement and three M.Sand) 12mm thick and pointed with tile grout (Nitotile Grout or equivalent) and cement in the ratio of 1:3 for joint, curing etc., complete complying with standard specification and as directed by the departmental officers. (The make and brand of the tiles should be got approved by the Executive Engineer before use on works)

Supplying and fixing P.V.C rainwater down fall pipe of 110m dia with necessary shoes, bends,& clamps etc.,

Supplying & Fixing in position of Indian type Water closet 580x440mm of approved quality

Wiring with 2x1.5 Sq.mm (22/0.3) PVC insulate SC Unsheathed Cu conductor of 1100v grade in suitable PVC rigit pipe on wall and ceiling with PVC Accessories and with TW switch box and 5A FT switch with painting of suitable colour for open PVC light Fan Point for Elctronic regulator ) (5 Point per coil) SD 18 Light Point & Fan Point

Wiring with 2x1.5 Sq.mm (22/0.3) PVC insulate SC Unsheathed Cu conductor of 1100v grade in suitable PVC rigit pipe on wall and ceiling with PVC Accessories and with TW switch box and 5A FT switch with painting of suitable colour for open PVC light Fan Point for Elctronic regulator ) (5 Point per coil) SD 18 Plug Point

Supply and fixing of 16 Amps DPI switch of 500 V with Main Box FUSE and natural on Suitable TW board with PWD earthing

Supply and run of 2 of 4 Sq mm (56/0.3) PVC insulated SC unsheathed Cu conductor of 1100V on 7/20 GI bearer wire for service connection mains SD 63

Towards cost and supply of Tube light Fittings with light including cost and convayance tosite and labour charges etc, complete.

Supply and fixing of 1200 mm (48") AC ceiling fan (Conforming to ISS 374 / 1979) complete with stepped electronic 300W regulator with 300mm down rod on the existing clamp.(SD110)

Provision for Stainless Steel Handle for Disabled Persons Toilet and Provision for Ramp Anganwadi and Disabled Toilet

Rain water Harvesting

Europead water closed White/Colour - Floor Mounting - including labour etc.,

Cost of white glazed earthernware wash hand basin without pedestal, One pair of cast iron brackets, One No. 15mm dia brass CP pillar tap, One No. 32mm dia "B" class GI waste pipe with rubber plug and chain, One No. 15mm dia GM wheel valve, One No. 15mm brass nipple, One No. 15mm dia nylone connection, One No. 32mm dia CP brass waste coupling

GST Amount for providing Service to Government Contract Works for the above Construction & Maintenance Works. { GST Amount is the Total GST Amount for overall quoted amount (Both Construction and Maintenance) above this row in column "BB" for all works in this package} (Refer Clause 13.2 & 13.3 of Section 2 of Instruction to Bidders (ITB) of SBD)

K PURUSHOTHAMAN (BID ID -1291547)