365/DGLP/ECHS/PA-01/2025-26

2.7 mm/3.5 mm Titanium LCP superior anterior clavicle plate with lateral extension with 6 locking option laterally (6-8 holes ,side specific) with compatible locking and cortical screws for all holes (USFDA/CE approved)

3.5 mm Low Profile LCP Superior Anatomical Clavicle plate (Titanium) 06-10 holes, right/left with compatible locking and cortical screws for all holes (USFDA/CE approved)

3.5 mm locking compression Extra-articular Distal Humerus Plates 6 - 14 holes ( left /Right) Titanium , with compatible locking and cortical screws for all holes (USFDA/CE approved)

3.5 mm LCP Olecranon plate Titanium (6-10 holes) (Left/ Right) with compatible locking and cortical screws for all holes (USFDA/CE approved)

Modular side locking Radial head prosthesis (head size 18-28 mm ) with uncemented fluted stem(6mm-10mm) (USFD /CE approved)

2mm Titanium Locking compression plate, 3-6 holes with compatible locking and cortical screws for all holes (USFDA/CE approved)

Precontoured 3.5 mm pelvic reconstruction locking plates 6-14 hole with compatible locking and cortical screws for all holes (USFDA/CE approved)

Spring plate for acetabular wall fixation 3-5 hole with compatible locking/ cortical screws for all holes (USFDA/CE approved)

Titanium Femoral neck plate fixation system with compatible hip bolt, antirotation screw,locking screw for plate (Complete set) (USFD/CE APPROVED)

Intramedullary Interlocking femoral Nail (USFDA/CE APPROVED) 9mm-11MM x 360-420 mm Trochanteric entry Titanium (Left/Right) with 2 proximal and two dital locking screws with compatible end cap

Distal femoral/Supracondylar nail (Titanium) 9mm-11mm X 300-360 mm with two matching proximal and two matching distal locking bolts/screws (USFD/CE approved and MRI compatible)

Titanium Reamed Cannulated Interlocking nail Tibia(USFDA/CE approved) 8 -10 mm diameter,270-360 mm length ,side specific , 5 locking option proximal and 3 locking option distal end of the nail With compatible Locking Bolts for all holes

Titanium Tibial Opening Wedge Osteotomy Plates (all sizes) with comaptible 4.5mm cotical and 6.5 mm locking screws

(Limb Reconstruction System )Rail fixator complete set for tibia/ femur (including standard clamp,angular correction clamp,translation clamp,acute correction clamp,ring adapters, dynamization component,compression distraction unit with compatible HA coated half pins)

HA coated SS self drilling schanz screws ranging from size 3.5mm - 6mm , 80-200mm length

3.5 mm Titanium self tapping cortical screws,all sizes

3.5 mm Titanium locking self tappig screws, all sizes

Titanium flexible Elastic nail size ranging from 1.5-4mm diameter, length 300-440mm

Expert tibial nail of 9mm (Titanium) dia with 3 innovative locking optionin combination with 5mm cancellous bone screw and 4mm 4 locking option in distal part.(compele range of size shape and side specific implant with instumentation at the time of surgery.Implant should be USFDA/EU-CE/BIS standard compliant.

Locking compression plate 3.5mm (Titanium) 6-10 hole with compatible locking and cortical screw for all holes (USFDA/CE approved)

JESS Fixator (Small/Medium/Large) Link Joints -20 small Connecting Rod, Dia : 2.5mm, Length : 100 mm - 02 Connecting Rod , Dia : 2.5 mm, Length : 200 mm - 02 Connecting Rod, Dia : 2.5mm, Length : 150 mm - 02 L' Rod, Dia : 2.5 mm (four) Z' Rod, Dia : 2.5 mm (two) Distractor, Double Hole, Length : 150 mm (two) Distractor, Double Hole, Length : 200 mm (two) K. Wire, Dia : 1.5 mm X 150 mm (four) K. Wire, Dia : 2.0 mm X 150 mm (two) Foot Plate - 01 Allen Key 2.5 mm - 01

5.5mm Suture Anchor with one ULTRATAPE and one #2 ULTRABRAID Suture

Femoral cortical suspension device (titanium) with self adjustable loop length(knotless locking system) made of continuous polyester/continuous fiber/braided polyethylene with two braided polyester sutures for arthroscopic ACL reconstruction using soft tissue graft. (USFDA Approved)

2.8mm titanium screw in anchors with high & low threads design, preloaded with single ultrahigh molecular weight Polyethylene braided fiber for bankart/slap repair

Shaver blade compatible with Arthrex arthroscopic shaver system- 4 mm (USFDA Approved)

Shaver blade compatible with Arthrex arthroscopic shaver system- 5 mm (USFDA Approved)

Non absorbable Suture braided polyester No.5 (USFDA Approved)

All inside menisceal repair system with preknotted two PEEK implants mounted on straight rigid needle (any angle deployability) with inbuilt depth penetration limiter and metal slotted cannula (USFDA Approved)

All inside menisceal repair system with preknotted two PEEK implants mounted on curved rigid needle (any angle deployability) with inbuilt depth penetration limiter and metal slotted cannula (USFDA Approved)

Shoulder Arthroscopic Trocar Cannula Disposable 8.5mm dia x 90 mm length (USFDA Approved)

Shoulder Arthroscopic Trocar Cannula Disposable 7.5mm dia x 75 mm length (USFDA Approved)

Shoulder Arthroscopic Trocar Cannula Disposable 5.5mm dia x 75 mm length (USFDA Approved)

Beath pin 350mm long stainless steel (USFDA Approved)

Pre contoured titanium dog bone button with knotless tight rope for AC joint fixation

Uncemented THR set consisting of Uncemented HA coated acetabular cup with three screw holes 48mm/50mm/52mm/54mm/56mm/58mm, Highly crosslinked polyethylene liner 10 Degree Posterier Lip (with 48/ 32 mm ,50/36mm,52/36mm ,54/36mm,56/36mm,58/36mm Head Option), uncemented femoral stem with 11/13 OR 12/14 taper and (Proximally HA coated),Stainless Steel head (32mm)

Posterior stabilized fixed bearing modular knee replacement prosthesis consisting of Cobalt chrome Femoral component–size 3 - 9 (deep trochlear groove, with single radius or Multi radius desgin), cobalt chrome tibial component–3 - 9 (polished top surface, modular with provision for attaching stem extension), crosslinked polyethylene (UHMWPE) fixed locking insert, polyethylene patellar component (three pegs), USFDA or CE approved/registered with one packet fo bone cement 40mg with antibiotics

Posterior stabilized mobile bearing modular knee replacement prosthesis consisting of Cobalt chrome Femoral component–size C/3 ,D/4,E/5,F/6 (asymmetric deep trochlear groove, with variable radii for condyles), titanium/cobalt chrome tibial component–size C/3,D/4,E/5,F/6 (Highly polished top surface), crosslinked polyethylene modular articular insert, polyethylene patellar component (three pegs), USFDA approved/registered with one packet fo bone cement 40mg with antibiotics

Sterile disposable pulse lavage system- USFDA approved

Bandage, Plaster of Paris 10 cm x 3 metres

Bandage, Plaster of Paris 15 cm x 3 metres

Knee arthroplasty drape set (Made of 3 layered reinforced impermeable fabric), consisting of 14 sheets of size 120 x 160 cm, one knee drape with conformable fenestration arm board covers absorbent laminate reinforcement and tube holders (200 x 325 cm), one impervious split drape with adhesive margins at split (140cm x 175cm), one screen with adhesive strip 160 cm x 200 cm, impervious stockinette (30 cm x 120cm) Variation in size upto 10% acceptable. Must meet ISO 11607 standards for materials and packaging of sterile barrier systems.

Disposable wrap around surgical gowns- Sealed at seams and not stitched, low lint, Fabric (GSM 43 or higher), PE reinforced at front and at sleeves, velcro fastening at neck. At least AAMI level 3 protection required from single layer of fabric. (Certification required)

Powder free gamma sterilized orthopaedic gloves with textured outer surface (Minimum thickness- 0.3 mm) Size 7.5

Disposable batteries compatible with BELL SURGICAL surgical Drill&saw system

Sterile disposable C-arm cover set (with 3 covers) to cover both sides of C-arm as well as for C-limb

Synthetic Absorbable Polygalactin 910/ Polyglycolic Acid coated with Polycaprolate, size 2-0, 70-90 cm, 1/2 circle RB, 30-40 mm

Synthetic Absorbable Polygalactin 910/ Polyglycolic Acid coated with Polycaprolate, size 3-0, 70-90 cm, 1/2 circle RB, 20-25 mm

Synthetic Absorbable Polygalactin 910/ Polyglycolic Acid coated with Polycaprolate, size 3-0, 70-90 cm, 3/8 circle Reverse Cutting, 20-25 mm

Synthetic Absorbable Polygalactin 910/ Polyglycolic Acid coated with Polycaprolate, size 4-0, 70-90 cm, 1/2 circle RB, 16-20 mm

Sterile disposable knee arthroscopy drape with fluid collection pouch, conforming circular fenestration & tube holders, 90” x 124” (USFDA approved and compliant with ISO-11607-2, ISO 11810-1 standards) 10% variation in size acceptable

Synthetic cast padding roll 10 x 3M (10% variation in size acceptable)

Synthetic cast padding roll 15 x 3M (10% variation in size acceptable)

Sterile Adhesive conforming soft non-woven fabric dressing with island absorbent pad (6 cm x 8 cm) 10% variation in size acceptable

Sterile Adhesive conforming soft non-woven fabric dressing with island absorbent pad (8 cm x 10 cm) 10% variation in size acceptable

Sterile Adhesive conforming soft non-woven fabric dressing with island absorbent pad (9 cm x 25 cm) 10% variation in size acceptable

Disposable Sterile Skin stapler (at least 35 staples in each stapler)

Vaccum assisted closure wound care system disposable polyurethane sheet, tubings & Y connection

Joint irrigation fluid 3 ltr collsapsible pack (Normal Saline)

Hylan Polymer (A&B) G-F 20, PFS 8mg/ml, 6 ml Inj

Femoral nail anterotation,side specific (Titanium) (USFDA/CE APPROVED)with one Helical Femoral Neck blade with one/ two distal locking bolts : 9mm-11mm diameter, 150-200mm length with compatible end cap

K-wire (stainless steel)1.5 mm diameter, 300mm length, pointed at both ends

K-wire(stainless steel) 1.5 mm diameter, 150mm length, pointed at both ends

K-wire (stainless steel)1.8mm diameter, 300 mm length, pointed at both ends

K-wire (stainless steel)2.0mm diameter, 150 mm length, pointed at both ends

K-wire (stainless steel)2.0mm diameter, 300mm length, pointed at both ends

1.25 mm non-threaded guide wire 150 mm length for 4.0 mm cannulated screw

Guide wire (stainless steel) 1.5mm diameter, length 300mm

3.5 mm LCP Medial distal tibial locking plate(Titanium, 4-14 hole, Rigt/left ) with compatible locking and cortical screws for all holes (USFDA/CE approved)

2.4mm/3mm Titanium Cannulated Headless screw with variable pitch (MRI compatible)-10-40 mm size (USFD approved and MRI compatible)

Distal radius volar locking plate - BICOLUMNAR type 3,4 and 5 holes (Ti) with appropriate (2.7/3.5mm) cortical (x4) and locking (x5) screws

Isopropanol & Benzalkonium Chloride skin antiseptic (Cutasept)

Cemented Bipolar hip prosthesis with double/triple tapered polished collarless femoral stem (12/14 taper), 41/42 mm,43/44mm,45/46mm,47/48mm bipolar outer shell and cobalt chrome femoral head, USFDA approved implants, including stem centralizer, cement restrictor, cement syringe with rubber dam for pressurization, with one packet fo bone cement 40mg with antibiotics

1.9mm All Suture anchor made up of high molecular weight polyethylene braided fibre & preloaded with double ultrahigh molecular weight polyethylene braided sutures which opens up to 3mm post deployment with special deployment mechanism through unique visual ,tactile & auditory cues intended for bankart instability repair

Injectable Bone Graft with ZPC

Radiofrequency ablator end electrodes compatible with Arthrex radiofrequency system (USFDA Approved)

4.0mm cannulated screw (Titanium) all size

4.5mm Cortical screw (Titanium) all size

4.5mm/5mm Locking head screw (Titanium) all size

Inj Iohexol 300 mg/ml in vial of 50 ml

Non Ionic Contrast Medium (0.5 mmol/ml) for MRI in 10 ml Prefilled Syringe/Vial (USFDA approved)

Dry view Laser films 17 inch x 14 inch compatible with 8100, 8150 Kodak, Carestream camera, Cartridge of 125 films each

Dry view Laser films 12 inch x 10 inch compatible with 8900 Kodak, Carestream camera, Cartridge of 125 films each

TRIMAX TXE Dry view laser imaging film 10" x 08" in (125 SHT) compatible with printer TRIMAX TX55 laser image 27x

TRIMAX TXE Dry view laser imaging film 12" x 10" in (125 SHT) compatible with printer TRIMAX TX55 laser image 27x

Inj Macrocyclic ionic Gadolinium based contrast agent for MRI, 10 ml vial

Inj Gadopentitate Dimeglumine 50 ml and 100 ml, 0.5 mmol per ml

Image archiving device, DVD

Image recording device, CD

Cylinder Oxygen 1246 ltrs gas for

CO2 5-Kg Cylinder

CO2 9-Kg Cylinder

Nitrous Oxide Cylinder 17000Ltr

Nitrous Oxide Cylinder 955 ltr

Allex Medical Systems (BID ID -3369735)

VIJAYA MEDICALS (BID ID -3378319)

SHREE JEE PHARMA (BID ID -3380184)

VASU VACCINES AND SPECIALITY DRUGS HYD PRIVATE (BID ID -3372333)

SMPL Life Sciences Pvt. Ltd. (BID ID -3376454)

K P Anil Kumar (BID ID -3379648)

SHI MEDIWEAR PVT LTD (BID ID -3363244)

Bhavuk Enterprises (BID ID -3379912)

Ansh Therapeutics Pvt Ltd (BID ID -3379940)

R.S.Enterprises (BID ID -3371442)

A B ENTERPRISE (BID ID -3372884)

REGE IMAGING AND CINEFILMS PVT LTD (BID ID -3379874)

LIFEGUARD MEDICALS (BID ID -3380090)

Sri Lakshmi Medical Hall (BID ID -3379517)

VARUN SPECIALITIES (BID ID -3378190)

SRI GANESH PHARMACY (BID ID -3379886)

Abishek Medical Devices (BID ID -3379903)

CHANDRA PHARMACUETICALS DISTRIBUTERS (BID ID -3377192)

Allex Medical Systems

VASU VACCINES AND SPECIALITY DRUGS HYD PRIVATE

CHANDRA PHARMACUETICALS DISTRIBUTERS

VARUN SPECIALITIES

VIJAYA MEDICALS

REGE IMAGING AND CINEFILMS PVT LTD

SRI GANESH PHARMACY

Abishek Medical Devices

LIFEGUARD MEDICALS

SHREE JEE PHARMA

JSHREE MEDITECH SYSTEM