Civil works

DSR-2023, Item No.2.25 Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 and for all lift.

DSR-2023, Item No.2.31 Clearing jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of girth up to 30 cm measured at a height of 1m above ground level and removal of rubbish up to a distance of 50 m outside the periphery of the area cleared.

DSR-2023, Item No.4.1.3 Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources)

DSR-2023, Item No.4.1.8 Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources)

DSR-2023, Item No.4.6.1 Providing and fixing at or near ground level precast cement concrete in kerbs, edgings etc. as per approved pattern and setting in position with cement mortar 1:3 (1 Cement : 3 coarse sand), including the cost of required centering, shuttering complete. 1:1½:3 (1 Cement: 1½ coarse sand (zone-III) derived from natural sources: 3 graded stone aggregate 20 mm nominal size derived from natural sources).

DSR-2023, Item No.4.1.7 Making plinth protection 50 mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand (zone-III) derived from natural sources : 6 graded stone aggregate 20 mm nominal size derived from natural sources) over 75 mm thick bed of dry brick ballast 40 mm nominal size, well rammed and consolidated and grouted with fine sand, including necessary excavation, levelling & dressing & finishing the top smooth

DSR-2023, Item No.5.1.2 Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level : 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources)

DSR-2023, Item No.5.9.1 Centering and shuttering including strutting, propping etc. and removal of form for Foundations, footings, bases of columns, etc. for mass concrete

DSR-2023, Item No.5.9.6 Centering and shuttering including strutting, propping etc. and removal of form for Columns, Pillars, Piers, Abutments, Posts and Struts

DSR-2023, Item No.5.22.6 Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. Thermo-Mechanically Treated bars of grade Fe-500D or more.

DSR-2023, Item No.6.1.2 Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in: Cement mortar 1:6 (1 cement : 6 coarse sand)

DSR-2023, Item No.13.2.2 15 mm cement plaster on the rough side of single or half brick wall of mix : 1:6 (1 cement: 6 fine sand)

DSR-2023, Item No.13.18 6 mm cement plaster 1:3 (1 cement : 3 fine sand) finished with a floating coat of neat cement and thick coat of Lime wash on top of walls when dry for bearing of R.C.C. slabs and beams. Neat cement punning.

DSR-2023, Item No.14.1.1 Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq.meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground, all complete as per direction of Engineer-in-Charge. With cement mortar 1:4 (1 cement : 4 fine sand)

DSR-2023, Item No.14.17 Raking out joints in lime or cement mortar and preparing the surface for re-pointing or replastering, including disposal of rubbish to the dumping ground, all complete as per direction of Engineer-in-Charge.

DSR-2023, Item No14.76 Cleaning and desilting of gully trap chamber, including removal of rubbish mixed with earth etc. and disposal of same, all as per the direction of Engineer-in-charge.

DSR-2023, Item No.14.77 Cleaning of chocked sewer line by diesel running vehicle mounting hydraulic operated high pressure suction cum jetting sewer cleaning machine fitted with pump having 4000 litres suction capacity and 6000 litres water jetting tank capacity including skilled operator, supervising engineer etc. for cleaning and partial desilting of manholes and dechocking of sewer lines. Dechocking and flushing of sewer line from one manhole to another by high pressure jetting system of 2200 PSI for sewer line from 150 mm dia upto 300 mm

DSR-2023, Item No.19.6.2 Providing and laying non-pressure NP2 class (light duty) R.C.C. pipes with collars jointed with stiff mixture of cement mortar in the proportion of 1:2 (1 cement : 2 fine sand) including testing of joints etc. complete : 150 mm dia. R.C.C. pipe

DSR-2023, Item No.19.6.3 Providing and laying non-pressure NP2 class (light duty) R.C.C. pipes with collars jointed with stiff mixture of cement mortar in the proportion of 1:2 (1 cement : 2 fine sand) including testing of joints etc. complete : 250 mm dia. R.C.C. pipe

DSR-2023, Item No.19.6.4 Providing and laying non-pressure NP2 class (light duty) R.C.C. pipes with collars jointed with stiff mixture of cement mortar in the proportion of 1:2 (1 cement : 2 fine sand) including testing of joints etc. complete : 300 mm dia. R.C.C. pipe

DSR-2023, Item No.19.35.1 Providing and laying Non Pressure NP-3 class (Medium duty) R.C.C. pipes including collars/spigot jointed with stiff mixture of cement mortar in the proportion of 1:2 (1 cement : 2 fine sand) including testing of joints etc. complete. 450 mm dia RCC pipes.

DSR-2023, Item No.21.1.1.2 Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and for all lift, as directed by Engineer-in-charge

Market rate Cleaning of septic tank by using vehicle mounted tankers of 4000 Ltrs or more and including cost of all labour charge, transportation, taxes, loading, unloading etc complete as pr the direction of Officer-in-charge.

Market rate Providing semiskilled manpower (like Fitter/Electrician etc. having relevant qualification and experience in similar nature of job) for operation of Sewage treatement Plant including all cost and T&P complete as per the direction of the Engineer-in-charge.

Market rate Engagement of contigent semi skilled manpower as per requirement

Market rate Engagement of contigent unskilled manpower for various miscellaneous works

Market rate Supply of Sodium Hypochloride for daily dosing purpose of STP effiuent water including all cost, transportation to STP, loading & unloading complete as per the direction of Engineer-in-charge.

Market rate Engagement of Tractor with trolley for shifting of materials in trips of full load up to a distance of 5 Km inside the campus including cost of fuel, driver etc all complete.

Market rate Engagagement of JCB for miscellaneous works suc as levelling of soil, jungle/bush cleaning including cost of fuel, driver etc all complete.

Market rate Rewinding Charges 3 Phase 5HP STP C Series Submersible Sewerage Pump Set (Non-Clogging Type) Make Crompton

Market rate Rewinding Charges 1 Phase 1HP Submersible Recirculation Pump Set (Non-Clogging Type) Make LUBI (LFP 2115F)

Market rate Rewinding Charges 1 Phase 3HP Submersible Pump Set (Non-Clogging Type) Make LUBI (LFP 3315F)

Market rate Rewinding Charges 1 Phase 2HP Submersible Pump Set (Non-Clogging Type) Make LUBI (LFP 3215F)

Market rate Rewinding Charges Ring Blower 3 Phase 2.2KW Blower Motor Make CLEANTEK

Market rate Overhauling of 3 Phase 5HP STP C Series Submersible Sewerage Pump Set (Non-Clogging Type) Make Crompton

Market rate Overhauling of 1 Phase 1HP Submersible Recirculation Pump Set (Non-Clogging Type) Make LUBI (LFP 2115F)

Market rate Overhauling of 1 Phase 3HP Submersible Pump Set (Non-Clogging Type) Make LUBI (LFP 3315F)

Market rate Overhauling of 1 Phase 2HP Submersible Pump Set (Non-Clogging Type) Make LUBI (LFP 3215F)

Market rate Overhauling of Ring Blower 3 Phase 2.2KW Blower Motor Make CLEANTEK

Market rate Removal of submersible sewage pump, sensor from sewerage tank & Re-installation after necessary maintenance 12 man-day for 24 pumps (quartly) Total requirement in a year 12x4=48 man day

Market rate Cleaning & maintenance of submersible pump, sensor, pressure switch/guage 01 fitter & 01 helper 1man day =04 pumps for 20 pumps = 6 man dayquartly 6x4 = 24 man day (each for fitter & helper) (i)Skilled man power for cleaning & mainteance

Market rate Cleaning & maintenance of submersible pump, sensor, pressure switch/guage 01 fitter & 01 helper 1man day =04 pumps for 20 pumps = 6 man dayquartly 6x4 = 24 man day (each for fitter & helper) (ii)Unskilled man power as helper