CERTAIN BR MISC REPAIRS TO DRAIN PATH CULVERTS COMPOUND WALL SECURITY FENCING AND HARD STANDING ETC IN TECHNICAL AREA ZONE-I and II AT RCI HYDERABAD

Amount

Demolition of PCC in ground floors and paving's not exceeding 15cm thickness (below or above ground level) complete including disposal of debris off the premises all as directed by Engineer in Charge.

Demolition of stone slab and tiles of any description or thichness set in cement mortar in floors, aprons ,path etc complete all as specified and directed.

M&L for hardcore of brocken stone bouldersof guage 63mm ,deposited ,spread,and levelledin layers n exc 15cm in thickness watered and rammed complete all as directed.

M&L, PCC 1:4:8 type D-2 as in sub base and mass concrete using 40mm graded stone aggregate finishing the surface fair and even including necessary formwork complete all as specified and directed

M&L, 40 to 50 mm thick sand filling under floors or in foundations including watering and consolidation complete all as specified and directed.

M&L, 60mm thick, M-35 Grade, machine pressed precast concrete interlocking paver block ,rubber moulded glazed finished top surfaces with grey cement and pigment any shape and size conforming to IS 15658-2006 complete all as specified and directed

M&L, 80mm thick, M-40 Grade, machine pressed precast concrete interlocking paver block ,rubber moulded glazed finished top surfaces with grey cement and pigment any shape and size conforming to IS 15658-2006 complete all as specified and directed

M&L, 25mm thick rubber moulded glazed finished top surfaces chequered cement concrete tiles of 300mm x 300mm size with grey cement and pigments, set, jointed and pointed in neat cement slurry over and including 20mm thick screed bed in cement mortar 1:4 complete all as specified and directed.

M&L, 100mm thick PCC 1:2:4 type B-1 in flooring (in pannels) using 20mm graded stone aggregate finishing the surface even and fair including necessary formwork complete all as specified and directed.

M/L cement concrete 1:2:4 type B-1 (using 20 mm graded stone aggregate) as in coping etc, incl formwork if required complete all as specified

M&L, PCC 1:3:6, type C-1 using 20mm graded stone aggregate as in drain, surface channels and benching including necessary formwork complete all as specified and directed.

Demolition of cement concrete reinforced (reinforcement cut as required to facilitate demolition)in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified and directed.

M&L, providing precast reinfoced cement concrete using cement concrete 1:2:4 type B1 in landing ,manhole covers , drain covers etc set in cement mortar 1:6 complete all as specified and directed directed.( Reinfocement will be measured and paid seperatly)

M&L, TMT bars 10mm dia and over, as in reinforcement cut to length, bent to shape required including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia complete all as specified and as directed.

M&L 1mm thick Mild steel, plain, black sheet in wall cladding,steel gates and similar work, cut to size, holes punched; including round headed screws,clout nails or rivets and fixed to wood or steel framing with plain 40 mm lap joints with riveted or welded seams, including bending or turning up, mitred angles, etc. as required

Demolition of brickwork or stone masonry including all quoins, arches, pillars, etc., built in cement mortar and removing the debris off the premises complete all as directed.

M&L, brickwork with sub class 'B' bricks, straight or curved on plan exceeding 6m mean radius built in cement mortar 1:6 complete all as specified and directed.

M&L, 15mm thick rendering in cement mortar 1:6, on fair faces of brick or concrete surfaces, finished even and smooth without using extra cement complete all as specified and directed.

M&L for providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete.(straight or curved) and finished exposed surfaces fair and even including demolition of old kerbs,Concrete,excavation, returning filling, and removing of excavated soil Etc complete all as specified and as directed by Engineer-in-charge.

M&L, preparation of new concrete road side kerb surfaces of any description over 10cm girth or width, not otherwise described etc., and applying one coat of primer and two coats of synthetic enamel paint in two colours as per approved pattern complete all as specified and directed.

M&L, preparation of old concrete road side kerb surfaces of any description over 10cm girth or width, not otherwise described etc., and applyingone coats of synthetic enamel paint in two colours as per approved pattern complete all as specified and directed.

M&L, two coats of cement base paint including preparation of old surfaces as in paver block/cheququered tiles complete all as specified and as directed

M&L for 20mm thick granite (of any type) work (table rubbed and polished) in floors and like beded in cement mortar (1:4), 15mm thick including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite all as specified and directed.

M&L for 12mm thick granite (of any type) work (table rubbed and polished) for wall lining in cement mortar 1:3 including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite all as specified and directed.

Providing edge moulding to 18-20mm thickj granite stone at any situation including machine polishing to edge to give high gloss finish complete all as specified and directed.

Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in hard/ dense soil including removal of soil to a distance not exc 50 m complete all as specified and directed.

M&L walling of square rubble regular coursed well bonded bedded and solidly hearted stone masonry built in cement mortar 1:4 complete all as specified and directed.

All as per item no 26 above but except stones.

M&L Flush pointing to squared rubble Secunderabad type masonary coursed or uncoursed in cement mortar 1:4 complete all as specified and directed.

M&L for boulder pitching laid dry handpacked tightly and grouted with cement and sand mortar 1:6 including demolition of unserviceable boulder pitching complete all as specified and directed.

Surface excavation n exc 30cm deep and avg 15 cm deep in any type of soil all as directed by Engr-in-Charge.

M&L, 100mm thick (spread thickness) filled with moorum/red bajri as in road side berms, spread, rolled and compacted to required camber and gradient using power roller of capacity exceeding 8 tonne and not exceeding 10 tonne complete all as specified and directed.

Dismantling of floor, hearth or wall tiling including cement mortar bedding (but not backing) and removing the rubbish off the premises all as specified and directed.

M&L, 30mm thick PCC 1:2:4 type B-0 using 12.5mm graded stone aggregate as in flooring, finishing the surface even and smooth using extra cement including necessary formwork complete all as specified and directed.

M&L for 15mm thick cement mortar screed bed in cement mortear 1:4 as screed to floor tiles complete all as specified and directed.

S&F for Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 all as specified and directed.

Supply only PVC SWR pipe 110mm bore and laying in floor complete all as specified and directed.

Dismantling of fencing wire mesh any type all as specified and as directed.

Dismantling posts or struts (wood, steel or R.C.C.) any section, including taking out embedded portion of concrete, brick masonary and making good disturbed ground all as specified and directed.

Excavating in post holes (or similar holes)in hard/dense soil, each n exc 0.5 cu.m, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, complete all as specified and directed.

M/L cement concrete 1:2:4 type B-2 (using 40 mm graded stone aggregate) as in foundation for posts etc, incl formwork if required complete all as specified

Supply only Chain link MS galvanised fencing, any size or type complete all as directed.

Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provission of binding wire all as specified and directed

S&F mild steel work as in posts and struts in fencing including cutting top to shape as direct, drilling holes, notching for wire etc,. flat iron fillets (for securing wire mesh etc.), nut bolts incl all necessary drilling, bolting or reveting,etc and similar work conforming to Fe410-0 or Fe-310-0 all as specified and directed.

Preparation of new steel surfaces and applying two coats of synthetic enamel paint over 10cm girth or width over a coat of red oxide primer complete all as specified and directed.

Sneha Associates

Anjana corporation

M/S SARASWATHI CONSTRUCTIONS

SUN LIGHT HOUSE

SRI SAI ENTERPRISES

M/s ANUSHA ENTERPRISES

S Anjan Reddy

ELEVATORS MAINTENANCE ENGINEER WORKS

sri vishnu enterprises