Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹4.5 LAccepted-AOC | ₹4.5 L | L1 | Accepted-AOC L1 |
| 2 | L2₹4.5 LRejected-AOC | ₹4.5 L | L2 | Rejected-AOC L2 |
| Sl No | Description | Qty | Unit | M/S J K ENTERPRISES L1 | Jai Gurdev Corporation L2 |
|---|---|---|---|---|---|
| 1.00PART-A | |||||
| 2.00Carriage of following line materials for 11 kv line from Center Store, Lalitpur to the Site of work including measuring weiging loading unloading at both ends and proper stacking at safe site. | |||||
| 3.00 | Holding Clamp for Top/Dropper Channel | 89 | No. | 1,367.04 ₹1,612.68 | 1,370.6 ₹1,617.13 |
| 4.00 | Stay Wire 7/10SWG | 286 | KG. | 1,467.18 ₹1,730.30 | 1,487.2 ₹1,756.04 |
| 5.00 | 11 Kv V-Type Steel Cross arm 65x65x6 MM | 57 | No. | 2,515.98 ₹2,969.13 | 2,516.55 ₹2,969.70 |
| 6.00 | 11 Kv Polymer Disc Insulator (T&C) 45 KN | 121 | No. | 2,261.49 ₹2,668.05 | 2,268.75 ₹2,677.73 |
| 7.00 | G.I Wire 6 SWG | 273 | KG. | 1,296.75 ₹1,531.53 | 1,296.75 ₹1,531.53 |
| 8.00 | 11 Kv Cross arm Clamp for PCC Pole 8.5 M | 55 | No. | 990 ₹1,168.20 | 1,001 ₹1,181.40 |
| 9.00 | PCC Pole 8.5 MTR Long | 90 | No. | 20,250 ₹23,895 | 14,539.5 ₹17,156.70 |
| 10.00 | Disc Fitting 45KN | 113 | No. | 649.75 ₹767.27 | 649.75 ₹767.27 |
Tender Value
Refer Docs
EMD Value
₹4,500
Closing Date
26 Jun 2025, 2:00 pmClosed
Superintending Engineer, EDC, Lalitpur
Behind LIC Office, Jhansi road, Near Elight Chauraha, Lalitpur
For Giving NSC to PS/UPS Schools
2025_DVVNL_1036838_1
13/EDC(L)/2024-25
Open Tender
Electrical Works
60 days
Lalitpur
Please refer Tender documents.
2 documents required · 2 mandatory
₹1,180
Superintending Engineer, EDC, Lalitpur
₹4,500
21 Jan 2026
6 May 2025
26 Jun 2025
6 May 2025
26 Jun 2025
6 May 2025
PART-A
Carriage of following line materials for 11 kv line from Center Store, Lalitpur to the Site of work including measuring weiging loading unloading at both ends and proper stacking at safe site.
Holding Clamp for Top/Dropper Channel
Stay Wire 7/10SWG
11 Kv V-Type Steel Cross arm 65x65x6 MM
11 Kv Polymer Disc Insulator (T&C) 45 KN
G.I Wire 6 SWG
11 Kv Cross arm Clamp for PCC Pole 8.5 M
PCC Pole 8.5 MTR Long
Disc Fitting 45KN
MS T-Off Channel 100x50x5x1300
11 Kv Stay Loop Insulator
Earth Rod 2540x20MM
11 Kv Composite Polymer Pin Insulator
Stay Set
LT Pin Clamp for PCC Pole
A.C.S.R. Weasel Conductor
ABC (3x95+1x70+1x16) Sqmm
LT ABC 3x50+1x35+1x16Sqmm
ABC 1x16-1x25-1x16mm2
16 Kva 11/0.25 Kv Transformer
10 Kva 11/0.25Kv Trnasformer
25 Kva 11/0.25Kv Trnasformer
11 Kv F Clamp for PCC Pole 8.5 Mtr. Long
11 Kv Stay Clamp
Danger Board With Clamp, B&N For PCC Pole
Stone Pad
T/F Base Angle
Gaurding Angle
M.S. Dropper Channel
M.S. Top Channel
11 Kv DP Clamp for PCC Pole 8.5 Mtr
Cross armHolding Clamp
Dead End Clamp
Barbed Wire
Nut & Bolt
Suspension Clamp
Eye Hook Clamp for PCC Pole
Eye Hook
Steel Tubeler Pole
11 Kv TPMO
Gaurding Clamp for ST Pole
Piercing Connector
Distribution Box Clamp
Distribution Box 3 Phase
PART-B
Erection of the following supports after making of pits as per RESSPO norms & filling of pits (Grouting of pole & Stay) by concrete of ratio 1:4:8 (cement brick balast & sand). Fitting of all accessories as cross arm, top channel, bracing angle, pin insulator, disc insulator, danger board, number plate, barbed wire & clamps etc. Plinthing of support above 300mm ground level by concrete of ratio 1:4:8 (cement brick balast & sand) will be done at the time of erection of pole. Painting of STPPole & structure as per RESSPO norms also (all type of paints, red oxide primer, nut, bolts washer & grouting material etc. will be provided by contractor).
Holding Clamp for Top/Dropper Channel
Stay Wire 7/10SWG
11 Kv V-Type Steel Cross arm 65x65x6 MM
11 Kv Polymer Disc Insulator (T&C) 45 KN
G.I Wire 6 SWG
11 Kv Cross arm Clamp for PCC Pole 8.5 M
PCC Pole 8.5 MTR Long
Disc Fitting 45KN
MS T-Off Channel 100x50x5x1300
11 Kv Stay Loop Insulator
Earth Rod 2540x20MM
11 Kv Composite Polymer Pin Insulator
Stay Set
LT Pin Clamp for PCC Pole
A.C.S.R. Weasel Conductor
ABC (3x95+1x70+1x16) Sqmm
LT ABC 3x50+1x35+1x16Sqmm
ABC 1x16-1x25-1x16mm2
16 Kva 11/0.25 Kv Transformer
10 Kva 11/0.25Kv Trnasformer
25 Kva 11/0.25Kv Trnasformer
11 Kv F Clamp for PCC Pole 8.5 Mtr. Long
11 Kv Stay Clamp
Danger Board With Clamp, B&N For PCC Pole
Stone Pad
T/F Base Angle
Gaurding Angle
M.S. Dropper Channel
M.S. Top Channel
11 Kv DP Clamp for PCC Pole 8.5 Mtr
Cross armHolding Clamp
Dead End Clamp
Barbed Wire
Nut & Bolt
Suspension Clamp
Eye Hook Clamp for PCC Pole
Eye Hook
Steel Tubeler Pole
11 Kv TPMO
Gaurding Clamp for ST Pole
Piercing Connector
Distribution Box Clamp
Distribution Box 3 Phase
Jai Gurdev Corporation (BID ID -5276440)
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid