Construction of CC Road/Paver Block Work in Div.-II 3003

Item Code [2025 unified 6.1]:Item Type [road] :: Construction of unreinforced, plain cement concrete pavement M30 (Grade), thickness as per design, over aprepared sub base, with 43/53 grade cement as per Clause 602.2.2, coarseandfineaggregatesconformingtoIS: 383, maximum size of coarse aggregate not exceeding 25 mm, mixed in a in fully automatic Batching Plant and transported to site intransitmixer for having continuous a gitated mixer, manufactured as per approved mix design including pumping of R.M.C. from transit mixer to site of laying, with all lead and lift including cost of ad mixtures in recommended portion as per IS9103 to accelerate/ retard setting of concrete, improve work ability with out impairing strength and durability as per direction of Engineer in charge laid in approved fixed side form work (steelchannel, laying and fixing of 125 micron thick poly thene film, wedges, steel plates including level lingthe form work as per drawing), spreading the concrete with shovels, rakes, compacted using Fixed Form Paverand finished in continuous operation including provision of contraction and expansion, construction joints, applying debonding strips, primer, sealant near approaches to bridge / culvert and construction joints, ad mixtures as approved, curing of concretes labs for 14-day susing water finishing to lines and grade as per drawing and MoRTH Specification Clause 602 including vaccum de watering process with all required equipments ( Dowel Bars will be paid seprately

Item Code [2025 UNIFIED BSR 3.5 (iii)]:Item Type [road] :: Excavation in Soil using Hydraulic Excavator and Tippers with disposal upto 1000 m Excavation for road work in soil with hydraulic excavator of 0.9 cum bucket capacity including cutting and loading in tippers, trimming bottom and sides lopes, in accordance with requirements of lines, grades and cross-sections, and transporting to the embankment location with a lift upto 1.5 m and lead upto 1000 m as per MoRTH Specification Clause 301.3

Item Code [2025 UNIFIED BSR 6.3 (iii)]:Item Type [road] ::Interlocking Concrete Block Pavement with M-30 Grade 0.30 Mtr x 0.30 Mtr x 0.15 Mtr Edge Blocks (measurements shall be made inner to inner side of edge blocks) Providing and Laying of Interlocking M-30 grade Concrete Block Pavements having thickness 80 mm as per drawings and as per IS 15658:2006. and all materials shall conform to MoRTH Specification Clause 602 with M-30 Grade 0.30 Mtr x 0.30 Mtr x 0.15 Mtr Edge Blocks. Sub Item Code [2025 UNIFIED BSR 6.3 (iii) + (a)]: Interlocking Concrete Block Pavement with M-30 Grade 0.30 Mtr x 0.30 Mtr x 0.15 Mtr Edge Blocks (measurements shall be made inner to inner side of edge blocks) Providing and Laying of Interlocking M-30 grade Concrete Block Pavements having thickness 80 mm as per drawings and as per IS 15658:2006. and all materials shall conform to MoRTH Specification Clause 602 with M-30 Grade 0.30 Mtr x 0.30 Mtr x 0.15 Mtr Edge Blocks. Category A : Dentated units to key into each other on all four faces Zigzag shape as per IRC:SP:63-2004

Item Code [road 2025 3.14]:Item Type [road] :: Construction of subgrade and earthen shoulders with approved material obtained from borrow pits with all lifts and leads ,transporting to site,spreading ,grading to required slope and compacted to meet requirement of Table300-2 with lead upto 50 m as per MoRTH Specification Clause 305.3

Item Code [road 2025 4.6]:Item Type [road] :: Providing ,laying , spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the material with water at OMC in mechanical mixer (PugMill), carriage of mixed material by tipper to site ,laying in uniform layers in sub-base/base course on a well prepared sub- base and compacting with smooth wheel roller of 80 to 100kN weight to achieve the desired density including lighting ,barricading and maintenance of diversion ,etc as per Tables 400-12&400-13 and MoRTH Specification Clause 406. By Mechanical Means with all lead