Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹48.5 LAccepted-AOC | L1 | Accepted-AOC Reasonable Rate | |
| 2 | L2₹50.4 L+₹95,583.60 (1.93%)Rejected-Finance | L2 | Rejected-Finance Higher bid value | |
| 3 | L3₹50.7 L+₹1.2 L (2.49%)Rejected-Finance HOUSE NO 59 THILIXU VILLAGE BLOCK V PS POST DIMAPUR NAGALAND 797 112 | DIMAPUR | DIMAPUR | NAGALAND | 797112 | L3 | Rejected-Finance Higher bid value | |
| 4 | L4₹51.1 L+₹1.6 L (3.23%)Rejected-Finance | L4 | Rejected-Finance Higher bid value | |
| 5 | L5₹51.1 L+₹1.7 L (3.39%)Rejected-Finance | L5 | Rejected-Finance Higher bid value |
Tender Value
₹48 L
EMD Value
₹96,000
Closing Date
5 Nov 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE 868 EWS
GE 868 EWS PIN- 913 868 C/o 99 APO
PROVN OF JAFRI WALL IN BACK SIDE OF BLDG NO P501 OR LINE OF 3 CORPS PRO UNIT PARKING AND HARD STANDING FOR SHOURYA MESS 02 CGI STEEL DOOR FOR STORE PURPOSE AT BLDG NO P397 OF 4003 FD HOSP AND ADDN ALTN TO BLDG NO T1 OP T293 T26 OF 3 CESR AT RMS
2022_MES_556356_1
8501/C/E8
Open Tender
Civil Works
Item Rate
180 days
RANGAPAHAR
Please refer Tender documents.
3 documents required · 3 mandatory
₹500
GE 868 EWS
₹96,000
Yes
4 Jan 2023
7 Oct 2022
7 Nov 2022
7 Oct 2022
5 Nov 2022
24 Oct 2022
7 Oct 2022 - 22 Oct 2022
Amount
B/R Portion Excavating in trenches not exceeding 1.5 m wide and not exceeding 1.5 m in depth, for foundation etc or for shafts,wells, cesspits, manholes etc not exceeding 10 sqm on plan and not exceeding 1.5 m in depth and getting out in soft/loose soil complete all as specified and as directed.
Demolition of plain cement concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified and directed.
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.
Taking down chowkhat or frames not exc 1.5 Sqm each (without taking off shutter from the frame) complete all as specifed and directed.
Taking down chowkhat or frames exc 1.5 Sqm but not exc 4 Sqm each (without taking off shutter from the frame) complete all as specifed and directed.
Dismantling timber scantlings unframed work 40 sqcm and over in section in any position complete all as specified and directed.
Demolition of reed, lathing single or double, including battens and plaster or chicken wire lathing complete all as specified and directed.
Dismantling Asbestos cement sheet (Corrugated, semi corrugated etc ) in roof covering complete all as specified and directed.
Disamantling wall and ceiling boards (fibre, pulp, insulation, etc.) any thickness including cover fillets complete all as specified and directed.
Dismantling boarding any description fixed in any position with nails complete all as specified and directed.
Dismantling of wrought iron or mild steel work of any description.
M&L returning filling in including spreading ,levelling,watering and well ramming in layers not exc. 25cm in soft/loose soil complete all as specified and directed.
M&L removing exacavated soil n. exc. 50m and depositing where directed at a level n. exc. 1.5m above starting point complete all as specified and directed.
M&L Cement concrete Type D2 1:4:8 (40 mm graded in foundations, filling and mass concrete complete all as specified and as directed.
M&L for mild steel TMT bars 10mm dia and over cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips.
All same as per item No 15 here-in-before but 5mm dia and over and including 10mm dia in stirrups spacers and binders
M&L for hardcore of gauge n.exc 63mm, deposited, spread and levelled in layers n.exc 15cm thick, watered and rammmed to a true surface.
M&L for PCC 1:2:4 type B2 (40mm graded stone agg) 100mm thick as in base/ sub base
M&L roughening surface of old concrete floor by picking ,sweeping clean and washing down with water to remove dust etc.
M&L for anti fungal chequered cement concrete tiles 25mm thick with 15mm thick screed bed or bedding layer of mortar for laying floor finishes in cement mortar 1:6, etc, set, jointed and pointed in neat cement slurry with grey cement and pigments complete all as specified and directed.
M&L for Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade laid, jointed with grey cement and no pigment complete all as specified including preperation of formation bed over 25 mm thick sand cusion and pointed in colour cement mortar 1:3
M & L for PCC 1:4:8 type D-2, 100 mm thick (using 40 mm graded stone aggregate) as in hardstanding
M & L for 15 mm thick screed bed or bedding layer in cement mortar 1:6 complete all as specified and directed.
M & L for coloured non skid ceramic tiles 7 to 8 mm thick (square/rectangular) in section exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed.
Same as per ser No 24 here-in-before but on vertical surfaces such as skirting , dado risers to steps over and including 10 mm thick bedding layer in CM 1:4 , set and jointed in neat cement slurry and pointed in white or coloured cement to match all as directed.
M & L for coloured non skid ceramic tiles 7 to 8 mm thick (square/rectangular) in section exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc set and jointed in neat cement slurry and pointed in white or coloured ceemnt to match complete all as specified and directed.
M&L for Glazed ceramic tiles in vertical surface 350x 250x 7 mm/ 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match over and including 10mm thick CM (1:4) backing coat.
M&L, providing Kota stone slab 20 to 25mm thick machine cut and mirror polished to size and fixed in floor and set and jointed in neat cement slurry and pointed with grey cement to match the stone floor/steps treads over 15mm thick screed bed in CM 1:6 complete all as specified and directed.
M&L, providing Kota stone slab 20 to 25mm thick machine cut and mirror polished to size and fixed in wall and set and jointed in neat cement slurry and pointed with grey cement to match the stone over and including 10 mm thick rendering in CM 1:4 for laying in vertical surfaces complete all as specified and directed.
S & F Pre-painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall fixed with self tapping screws complete all as specified and directed.
S & F Pre-painted galvatume aluminum zinc coating GI based Plain steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall fixed with self tapping screws complete all as specified and directed.
M/L for Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. conforming to Fe 410 -W (Gde-E- 250) quality-A
S/F for Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment conforming to Fe 410 -W (Gde-E- 250) quality-B
S/F 2nd class hard wood scantling as in purlins rafters & framed work etc clean sawn complete all as specified and directed.
All as per item No 34 here-in-before but except timber complete all as specified and directed.
S & F for 4 mm thick of size 600x600mm HSPC (high pressure Steam Cured) pre-painted self embossed, textured designer board E-Board Classic to be fixed or laid with GI frame grid/section size 600mm x 600mm with main runner 38x24x0.9 mm thick, cross tee 8.6x24x0.9mm and wall angle 19 x19x0.9mm duly suspended with 2mm dia GI bar hangers 1200mm centre to centre both ways fixed with steel dash fasteners or from purlin from the roof with alignment clip including providing provisions for light fixtures of any size complete all as specified.
M & L 25mm thick second class hard wood boarding , plained one side with butt joints as in eaves boards complete all as specified and directed.
M/L for 75 mm thick PCC 1:3:6 type C2 , using 40 mm graded agg in plinth protection/aprons/path laid to slope of 1:12, finished fair and even without using extra cement with and including all necessary formwork to divide tha area in panels, finishing exposed edges fair or rounding or chamfering where directed and providing 10 mm wide joints throughout thickness of plinth protection duly filled with mastic filling (one part of hot bitumen 85/25 and three part of fine sand by weight) complete all as specified and directed
M&L GI wire netting 0.71 mm dia and 12 mm mesh lathing in to reed in walls incl all laps cutting and waste complete all as specified and directed.
M&L 15mm thick plastering in CM 1:4 on one side of lathing in two separate layers even and smooth without using extra cement complete all as specified and directed.
M&L 10 mm thick plastering in CM 1:6 the other side of lathing finished even and smooth without using extra cement complete all as specified and directed.
M&L for 2nd class hard wood plain solid straight chowkats and frames wrought framed rebated on the solid rounded or chamfered put together with glue pined joints complete all as specified and directed.
S/F for Pressed steel frames of 125x60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete, as specified.
M&L for 35 mm thick 2nd class hardwood plain framed pannelled shutter (any number of panels) with panels of timber flat on both sides or of veneered particle board medium density , wood particle board with commercial face veneers , supplied and fitted to chowkats complete all as specified and directed.
S&F anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified.
S&F for anodised aluminium window and ventilator shutters, fixed type without sash bar, aluminium section of size 40 x 18 x 1.29mm thick including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc. complete all as specified.
S & F for aluminium door shutters, without sash bars, aluminium sections weighing 0.55 Kg/m including necessary joining cleats, glazing clips, rubber neoprene packing ,handles 2 Nos in each door,hinges, anodised aluminium snap beading screws,mortice lock with keys etc. complete all as specified.
S&F Sheet glass 4.8mm thick, ordinary quality and glazing with oil putty in squares not exceeding 0.5sqm in each pane.
S&F Sheet glass 4.8mm thick, ordinary quality and glazing with oil putty in squares exceeding 0.5sqm in each pane.
M&L for fixing 4 mm thick anodised aluminium composite panel fixed in aluminium frame including necessary rubber beading, jointing cleats complete all necessary items to fix with frame and all as specified and directed by Engineer-in Charge.
S & F Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples
S&F for aluminium (extruded section) body door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed complete all as specified and directed.
M/L 35mm thick 2nd class hard wood Glazed and skelton shutter, open rebated and prepared to receive glass, gauge etc. devided into squares with plain chamfered or rounded, mitred and rebated sash bars edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc. sizes of members of shutters as specified in SSR Part-I Section-8 clause 8.24(a) complete all as specified.
M/L 30mm thick 2nd class hard wood Glazed and skelton window and ventilator shutter, open rebated and prepared to receive glass, gauge etc. devided into squares with plain chamfered or rounded, mitred and rebated without sash bars edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc. sizes of members of shutters as specified in SSR Part-I Section-8 clause 8.24(b) complete all as specified.
S & F,Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing complete all as specified and directed.
S&F Factory made solid panel pvc door shutter 30 mm thick (style) con-sisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be cov-ered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement suppling & fixing at site as per specification and drawing complete all as specified and directed.
M&L butt hinges medium grade cold rolled mild steel and fixed size of hinges 100 mm long size
M&L butt hinges, medium weight 75 mm long size
S/F Aluminium anodised barrel tower bolt of extruded section and fixed 100 mm long
S/F Aluminium anodised barrel tower bolt of extruded section and fixed 200 mm long
S&F 150mm long aluminum hook and eye, complete all as specifed and directed.
S&F Aluminium handle cast type anodised 150 mm long
S&F 125mm size aluminium handles,cast type,anodised all as directed complete all as specified and directed.
S/F Aluminium alloy anodised sliding door bolt with hasp and staple (bolt type fixing clips of sheet cast or extruxded section(300 mm long)
S&F 300mm, mild steel ordinary rat tail rod pattern springs including roller and roller plate complete specified and directed
S&F floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor, overall length of cover plate 140mm.
S&F 3 mm thick Figured glass, pin head type and glazing with oil putty in squares n.exc 0.5 sq. m in each pane
S&F 3 mm thick sheet glass ordinary quality and glazing with oil putty in square n.exc 0.5 sqm in each pane including hacking out old broken glass from any type of frame complete all as specified and directed.
S&F galvanised mild steel wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tacks or galvanised wire staples all as directed by Engineer- in -Charge.
Taking down cement plaster on brick walls including raking out joints hacking for key, scrubbing down with water etc
Demolition of brick work built in cement mortar incl all quions, arches pillars etc but excl ashalar facing
M&L brick work with sub class B bricks straight or curved on plan exc 6 m mean radius in CM 1:6
M&L brick work with sub class "B" bricks straight or curved in plan exceeding 6 mtr mean radius built in CM(1:4) using old size bricks complete all as specified and as directed.
M&L brick work with sub class B bricks straight or curved on plan to any radius in half brick thick walls built in CM 1:4
M&L providing precast cement concrete louvers and jalies, 30mm thick (measured solid), type B-0 (12.5mm graded stone agg) including moulding but excluding frame and set in CM (1:4) complete
RCC (1:1.5:3) type A-1 using 20mm graded stone aggregate as in band, coping, bed plate, benching etc including slightly rounded of chamfered angle, throating, etc complete all as specified and as directed.
M & L Formwork to sides and soffits of floor or roof beams, beam haunch ings, girders, bressummers, lintels, cantilevers, shelves including sup- ports, overhangs, etc. also splays between floors and beams, etc
M & L rendering 15mm thick in cement mortar 1:4 on fair faces of brick or concrete work even and smooth without using extra cement.
M & L rendering 10mm thick in cement mortar 1:6 on fair faces of brick or concrete work even and smooth without using extra cement.
M&L for applying two coats of oil bound distemper on new plastered surfaces of walls including preparation of surface and priming with chalk whiting, on plastered surfaces, prepara-tory to distempering complete all as specified and directed.
M&L for preparation of old decorated surfaces of walls by washing, rubbing down and stopping of distempered surfaces and applying one coat of oil bound distemper of approved shade/tint all as specified.
M&L for preparation of new plastered surfaces and applying two coats of cement base paint of approved shade on walls including priming plastered and other surfaces with alkali resistant priming paint all as specified & directed by Engineer-in-Charge
M&L for complete removal of existing treatment including cleaning of mortar drops, smoke soot, moulds, moss, efflorescent salts, trading oil, greasy spots etc and preparation of plastered surfaces and applying two coats of cement base paint of approved shade on walls all as specified and directed by Engineer-in-Charge
M&L for preparation of new untreated wooden surfaces of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer. -
M&L for preparation of old painted surfaces of wood and wood based material of any description over 10 cm in width or girth and applying one coat of synthetic enamel paint all as specified.
M&L for preparation of new steel surfaces exc 10cm width or girth and applying two coats of synthetic enamel paint over one coat of red oxide primer all as specified & directed
M&L for preparation of old steel surfaces exc 10cm width or girth and applying one coat of synthetic enamel paint all as specified & directed.
Taking up or down steel tubing and connections including cleaning for refixing with all fittings for 15 mm bore GI tubing.
Taking up or down steel tubing and connections including cleaning for refixing with all fittings for 20 mm bore GI tubing.
Refixing of old steel tubing and connections in new or old position with all fittings to floor, wall or ceiling as directed, for 15mm bore GI tubing.
Refixing of old steel tubing and connections in new or old position with all fittings to floor, wall or ceiling as directed, for 20mm bore GI tubing.
S&F tubes medium grade, galvanised wih all fittings and fixed complete to walls and ceiling or laid on floors etc, 15 mm bore.
S&F tubes medium grade, galvanised wih all fittings and fixed complete to walls and ceiling or laid on floors etc, 20 mm bore.
S&F in repairs for 15mm dia of pipe bib taps cast copper alloy, fancy type, chromium plated with crutch or butterfly handle screwed down, screwed for iron pipe or for brass ferrule and fixed.
S& F in repairs Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered ‘Hot' or ‘Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as spfd & directed.
S&F in repairs for 15mm dia of pipe stop valves,fancy type and chromium plated screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipes or for Unions and fixed .
S&F in repairs PVC connection 15mm dia and 45cm long with two Nos of brass checknuts and washers complete.
Supply and fixing of soap-dish chromium plated all as specified
S&F grating doom 125mm dia with waste hole of PTMT (Min wt 40 gms).
S&F in repairs 600mm long tubular towel rail brass chromium plated 20mm dia, D type 60cm longfixedwith two plugs (Gutties) of 2nd class hard wood embeded in cement mortor 1:3 with MS screwscomplete all as specified.
S/ F towel ring of PTMT fixed with and including Chromium plated Brass Screws and wooden/ plastic cleats ( Minimum weight 90 gms) etc fixed in kitchen.
S& F in repairs PVC mounted 5mm thick bevelled edge looking mirror 600 x 450mm including taking down old fixed with chromium plated brass screws and cup washers
S&F PVC Shelves of PTMT fixed with and including chromium plated brass screws and wooden/plastic cleats. (Minimum weight 105 gms)
S&F Glass shelves, with 12mm thick desher glass incl CP brackets with brass nuts 300 mm long.
M&L cement concrete type C2 1:3:6 (40 mm graded agg) as in surface channels and drains
M&L for PCC 1:3:6 type C-1 using 20mm graded stone aggregate as in coping including necessary formwork complete all as spfd and directed
S & F 75mm dia, PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified and as directed.
S&F in repairs for Draperly rod /Harrison rails of CP of 20mm dia with fixing brackets , stops, rollers and rings etc.
M&L for Solid PVC Wall Lining consisting of 5mm thick Plain or coloured with wood grains printed PVC sheet inclusive of solvent cement and fixing at site on PVC frame all as specified and directed.
S&F for 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC Frame as per specification and drawing complete all as specified and directed.
M&L second class hardwood plain fillets exc 13sqcm and not exc. 25sqcm, square or rectangular in section, wrought, secured with nails or brads.
E/M Portion Taking down carefully copper/ aluminium point wiring (light, fan, socket or power) complete, including fitting & fixtures such as switches with board, ceiling roses, pendents, bell/ buzzer, bell push, lamp holders, regulators, sockets, light fittings etc., removing material from site and making good to the disturbed surfaces of walls, ceiling, floors etc. including making good the disturbed surfaces and paint touch up to match with the existing surface complete all as specified and as directed.
M&L for Point wiring complete with two runs of 1.5 sqmm single core PVC insulated FR-LSH cable 1100 volts grade with multi-stranded copper conductors, drawn through and including PVC double locked Casing & caping including provision of 1.5 sqmm, FR-LSH, PVC insulated copper cable as earth continuity conductor connected to common earth dolly, including PVC rectagular box for mounting switches / sockets / regulators etc. with 3 mm thick plastic laminated sheet cover of suitable size as required at site complete all as specified and as directed.Make:- Richa/ Finolex/Havells/RR Kabel Make of caping/casing & PVC boxes :- Prestoplast/Finolex/supreme/Richa
One light/call bell Point controlled by one way switch .
One Exh/Ceiling fan point controlled by one, one way switch.
One 3 pin socket outlet 5 Amps on the same board with other switches.
One 3 pin socket outlet 5 Amps on the Independent board.
All as per item No-113 here-in-before but with 2.5 Sq mm for 3 pin 15 Amps socket point controlled by one switch on independent board and 2.5 Sq mm copper conductor green in colour as earth continuity conductor connected to common earth dolly complete all as specified and as directed.
M&L for Switch piano flush type single pole, one way 5A Make:- Havells/Legrand/Anchor
M&L for Socket outlet, 2 in 1, 3 pin 5A flush type Make:- Havells/Legrand/Anchor
M&L for Switch Socket combination, 2 in 1, 5 pin 5A flush type Make:- Havells/Legrand/Anchor
M&L Switch socket combination 2 in 1, 5A/16A, 5 in 1 flush type Make:- Havells/Legrand/Anchor
M&L for stepped type electronic fan regulator 100/120 Watt socket size flush type on the existing phenolic laminated sheet etc. Make:- Havells/Legrand/Achor
M&L for bell push switch 5 amp flush type. Make:- Havells/Legrand/Anchor
M&L for Bell, AC, 230 Volts, single pole Make:- Havells/Legrand/Anchor
M&L for ceiling rose 3 terminal PVC/Polycarbonate isolated body complete all as specified and directed. Make:- Havells/Legrand/Achor
Taking down existing burnt aluminium/ copper sub main wiring and M&L for sub main wiring with two runs of 4 Sq mm and one run of 4 Sq mm for earth wire with multi standard copper conductors, 1100 volts grade, drawn through and including PVC double locked Casing & caping including complete all as specified and as directed. NOTE:- Two runs of 4 Sq mm + one run of 4 Sq mm and one run of PVC casing & capping and its accessories of suitable size shall be measured as one unit length .Make:- Richa/Finolex/Havells/RR Kabel Make of caping/casing :- Prestoplast/Finolex/supreme/Richa
S&F for , IP>= 20, Class-I, LED Light fitting 1 x 20 watt (4 Ft), 240 V, PF-0.9, CRI >= 80, CT>= 6000 K, Wall/ Surface mounted, intergrated type with all accessories internally prewired and incl connecting up with and incl twin/ three core twisted flexible copper conductor cable of suitable size in and incl flexible hose from ceiling rose to fitting complete all as specified and as directed. Make : Havells/Crompton/Bajaj/ Philips.
All as per item No 124 above but 10 watt LED, 2' batten, Wall mounted with polycarbonate housing/ batten. Make : Havells/Crompton/Bajaj/ Philips.
Supply and fixing LED luminaire 600 mm x 600 mm, 35/36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete Make : Havells/Crompton/Bajaj/ Philips.
Supply , fixing and testing in replacement of LED Bldg Security light fitting of capacity 20 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete including 1.2 mtr GI bracket of 25mm bore light grade bent to shape and fixed on wall with metal fastners 2 Nos 10mm dia incl drilling of holes as reqd and connecting up with flexible copper cable of size 0.75 sqmm 3 core from ceiling rose to the light fitting and all as specified and directed by Engr-in-Charge. Make :Bajaj/ Philips/Havells/Crompton Greaves
Taking down Exh/Ceiling fan of any sweep carefully from its installed position, dismantling complete, cleaning all dust, applying grease for bearing, painting of fans complete with superior quality synthetic enamel paint by spraying including filling cavaties with filler, after cleaning all dust, reassembling the fan and blades, hanging/ fixing the fan in its original position and testing on completion complete all as specified and as directed.
M&L for rubber bush with clamping set, comprising GI bolt, nut and split pin complete all as specified and as directed.
M&L for replacement of capacitor 2.5 Mfd incl making electrical connection complete all as specified and as directed.
M&L for replacement of steel ball bearing/bush of suitable size compatible to the existing ceiling fan/Exhaust Fan complete all as specified and as directed.
M&L for copper rewinding for suitable size complete to the existing ceiling /Exhaust fan complete all as specifed and as directed.
M&L for MCB Distribution board double door type SPN 8 way, sheet steel, powder painted, with copper bus bar neutral link & earth bar etc. and fixing MCBs of various rating capacity including taking down old unsv MCB DBs complete all as specified and as directed. Make:- Havells/Legrand/Siemens
M&L for MCB SPN 63 Amps, 230 volts, 50 Hz suitable for fixing in MCB DB 'C' series incl taking down old unsv MCB complete all as specified and as directed. Make:- Havells/Legrand/Siemens
M&L for MCB SPN 40 Amps, 230 volts, 50 Hz suitable for fixing in MCB DB 'C' series incl taking down old unsv MCB complete all as specified and as directed. Make:- Havells/Legrand/Siemens
M&L for MCB SP 6-32 Amps, 230 volts, 50 Hz suitable for fixing in MCB DB 'C' series incl taking down old unsv MCB complete all as specified and as directed. Make:- Havells/Legrand/Siemens
Taking down burnt unsv LT UG cable of any size and M&L for laying of LT UG cable, XLPE insulated, galvanised steel strip or wire armoured, heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area of 25 sq mm, 2 core complete all as specified and as directed. NOTE :- (i) Excavation and earth work, sand cushioning, cable protection cover, pipe etc. shall be measured and paid seperately under relevant items. Make : Richa/Havells/Finolex
All as per Item No 137.00 above but 16 Sqmm 2 core complete all as specified and as directed.
Excavation in trenches not exceeding 1.5 m wide and not exceeding 1.5 m depth and getting out in soft/ loose soil complete all as specified and as directed.
Returning filling in trenches including spreading leveling watering and well ramming in layers not exceeding 25 cm thick all complete all as specified and as directed.
Removing of excavated material not exceeding 50 m and depositing where directed at a level not exceeding 1.5 m above the starting point all complete all as specified and as directed.
M&L for spread fine river sand in trenches complete all as specified and as directed. NOTE: For measurement purpose, punned down thickness shall only be taken.
M&L for laying brick sub class 'B' old size burnt bricks for cable protection of size 230mmx115mmx75mm complete all as specified and as directed
Supply & laying tubes ' Medium grade' galvanised, with all fittings, fixed complete to walls, poles, ceilings for protection of cables of size 40 mm dia bore including taking out unsv GI tubing complete all as specified and as directed. Make:- Jindal/TATA/Prakash surya
M&L for earthing complete with galvanized steel earth plate electrode of size 600x600x6mm thick buried directly in ground (earth pit not less than 2.25m deep below the normal ground level) with top edge of the earth plate not less than 1.5 mtr below normal ground level connected to galvanised earth lead wire 4 mm dia as earth lead connectd by means of bolts, nuts, washers and check nuts all as shown in electrical plate No 3 of MES SSR Part-I, including testing on completion complete all as specified and as directed.
M&L for metal clad AC socket point single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB SP 20 Amps complete all as specified and as directed. Make: Havells/Legrand/Siemens
Taking down carefully Lightning Conductor of any size, Testing point and Air termination) from its intalled position, removing materials from site and making good disturbed surfaces of walls, floors, etc. complete all as specified and as directed.
Taking down carefully aluminium/ copper strip of any size, Testing point and Air termination from its intalled position, removing materials to store for keeping in safe custody for reuse at site and making good disturbed surfaces of walls, floors, etc. complete all as specified and as directed.
M&L for Aluminium strip 25 x 3.15 mm with saddles and fixing screws etc for roof conductors and sown conductors above ground.
M&L for Air termination, single pointed aluminium rod 12 mm dia and 300 mm long complete all as specified and as directed.
M&L for test point terminal block made of gun metal or phosphorus bronze size 75 x 75 x 25 mm, drilled and screwed including 3 nos. 8 mm dia 25 mm long hex. Head screw complete all as specified and as directed.
M&L for earthing complete with galvanized steel earth plate electrode of size 600x600x6mm thick buried directly in ground (earth pit not less than 2.25m deep below the normal ground level) with top edge of the earth plate not less than 1.5 mtr below normal ground level connected to galvanised strip 25 x4 mm dia as earth lead connectd by means of bolts, nuts, washers and check nuts all as shown in electrical plate No 3 of MES SSR Part-I, including testing on completion complete all as specified and as directed.
KAILASH KUMAR LADHA
Shri Atoshe Tuccu
Ms ARENKOKLA CONTRUCTION
MS SADHNA RAHUL
M/S ARVIND GROUP OF CONSTRUCTION & INFRASTRUCTURE
Kalim sons
Shri B K Ukil
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .