NIT No. 34, Item No. 04 (2025-26)

Supply of LED decorative diffuser 2x2 ft. panel light 36W/40W Make: Bajaj/ Havells/DJB approved

Supply of Higher Wattage Decorative ultra slimaluminum LED lighting fixture with highlumen output, environmental friendly,energy efficient ready to use pack.24 W LED 6500 K. Make: Bajaj/ Havells/DJB approved

Supply of Elegantly designed sleek recessed mounted pressure die-cast aluminium luminaire in powder coated white finish in round profile with optimized heat sink for efficient heat dissipation and independent electronic LED driver. 18W/20W. Make: Havells/Bajaj/DJB approved

Supply of Wall Fan 400 mm. Make: Havells/Bajaj/DJB approved

Supplying and fixing call bell/ buzzer suitable for single phase,230 V, complete as required DJB SOR 31.38

Supply of 1200 mm size Ceiling Fan. Make: Bajaj/Havells/DJB approved

Supply of 300 mm exhaust fan. Make: Bajaj/Havells/DJB approved

Supply of LED Mini Post Top for main gate of office. 25W. Make: Bajaj/Havells/DJB approved

Supply of New generation energy saving and environmental friendly long life LED street light made up of pressure die cast aluminum housing with high efficient LED as lighting source and PC cover having TOP Opening separate driver compartment with IP66 protection and impact resistance of IK07. 70/72W. Make: Bajaj/Havells/DJB approved

Supply of PVC/XLPE insulated (heavy Duty) Electrical Cable for working voltage up to and including 1100 volts to IS:1554 (part-I) 1988/7098 (part-I) with aluminum conductor- ISI marked power cable- aluminum for size 10 Sq.mm 2 core Armored cable. Make: Havells/Gloster/Grandlay/DJB approved make.

Supplying and fixing of 32 mm dia X 2.00 metres long G.I. pipe (medium class) bracket for mounting of fluorescent / HPMV / HPSV street light fitting on pole including bending the pipe to the required shape, 2 nos 40 mm X 3 mm flat iron clamps with nuts, bolts and washer, painting the flat iron with primer and finish paint etc. as required. DSR 2022 E&M – 12.34

Wiring for light point / fan point/ exhaust fan / call bell point / with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with piano type switch, phenolic laminated sheet, suitable size MS box and earthing the point with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable etc. as required. DSR E&M 2022 1.10.3 Group C

Wiring for circuit/ sub main wiring along with earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required., 2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wireDSR E&M 2022 1.14.2

Wiring for circuit/ sub main wiring along with earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required., 2 X 16 sq. mm + 1 X 6 sq. mm earth wire. DSR E&M 2022 1.7.6

Wiring for circuit/ sub main wiring along with earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required. 2 X 4 sq. mm + 1 X 4 sq. mm earth wireDSR E&M 2022 1.14.3

Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 A modular socket outlet and 15/16 A modular switch, connections etc. as required. DSR E&M 2022 1.32

Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 & 5/6 A modular socket outlet and 5/6 A modular switch, connections etc. as required. DSR E&M 2022 1.31

Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required.DSR E&M 2022 1.25

Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required. 25 mm. DSR E&M 2022 1.21.2

Installation, testing and commissioning of ceiling fan, including wiring the down rods of standard length (upto 30 cm) with 1.5sq. mm FRLS PVC insulated, copper conductor, single core cable etc. as required.DSR E&M 2022 1.44

Supplying and fixing DP sheet steel enclosure on surface/ recess along with 25/32 A 240 V "C" curve DP MCB complete with connections, testing and commissioning etc. as required.DSR E&M 2022 2.16

Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator), 12 way , Double door DSR E&M 2022 2.3.3

Supply of 25 A DBOXx MCB Protected Power Unit 6 Module for Protection of Home Appliances. Make: Havells/Bajaj/DJB approved make.

Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, “C” curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. Single pole DSR E&M 2022 2.10.1

Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, “C” curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. Double pole DSR E&M 2022 2.10.3

Supplying and fixing following rating, double pole, 240 V, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required. 63A. DSR E&M 2022 2.12.2

Fixing of LED diffuser lights, LED street lights including cable laying if required, wall fans, exhaust fans, bells, LED batten lights, ceiling lights, Post Top with the help of tools/tackles, machinery and heavy/manual labour. This work includes civil work if any, cutting, welding, grinding, finishing etc. with all the safety measures as per site requirement and direction of engineer-in-charge.

Testing and commissioning of all above mentioned items except s.no. 7 on full load with all the functional tests as per site requirement.