REPAIR AND MAINT REPLACEMENT OF SECURITY LIGHTS GARDEN LIGHT POST TOP LUMINARIES SOLAR LIGHT FLOOD LIGHT BOLLARD LIGHT GLOW SIGN BOARD AND ALLAIED SERVICES UNDER GE W MATHURA

Amount

Supply and fix in replacement GI pipe bracket of 1.5 m long and made out of 40mm dia light grade pipe including MS clamp of size 25 x 4mm - 02 Nos for holding one bracket, nuts and bolt with washer duly painted with aluminium paint over one coat of primer of suitable size complete all as specified and directed.

Supply & fixng in replacement of energy efficient LED street light fittings of 45 Watt capacity including electric connection, complete fitting including all accessories and following specification and all as specified and directed by Engineer-in-Charge:- (a) Lumen system efficiency of luminarie should be minimum 100 Lumen per watt. (b) Input voltage range 140 to 270 volts (c) Temp operating range minus 10ºC to Plus 50º C (d) Power factor : Minimum 0.95 (e) THD : Max 10% (f) CRI : More than 80 and CCT : 5700 K (g) IP rating : IP 66 (h) IK rating : Minimum IK07 Cont/-

Cont/- (j) Pressure dis cast aluminium alooy for housing and heat resistant alear toughened glass. (k) Built in potted LED driver of the make as of the luminaire. (l) LED driver should be complete with all protection viz open / short circuit protection, over voltage protection, all as per standard design of manufacturer. (m)Surge protection 10kV (inbuilt + extended) (n) Lens : High efficiency wide angle lens. (o) BIS approved fixtures and driver. (p) Rated life time : 50000 burning hrs (Average 10 to 12 hrs daily)

Supply and fixing in replacement junction box complete with fixing accessories and following specification and all as directed by Engr-in-charge. (a) Junction box should be insulated and made out of polycarbonate with glass fiber re-inforced material. (b) Size Min 210 mm x 155 mm x 92 mm. (c) IP protection : IP 66 in accordance with IEC 60529. (d) Internally embedded gasket of plyurethane. (e) Junction Box must meet the provision laid down in IEC 60998-1, IEC-60670-22, IEC-60670-22, IEC-60670-2 to 5 and color according to RAL 9011. Cont/-

Cont/- (f) The manufacture of junction box shall submit a copy of IEC cerfigicate. (g) Junction box shall be fire retardant and self extigushing in accordance with IEC-60695-2 to 11, DIN VDE 0304 part -3, UL94 V-2 flammability standard. It should be tested at Glove Wire test for 960C. (h) The degree of protection of enclosure against mechanical load shall be in accordance with E N 50298 for IK08. (j) Junction box shall be 4 pole complete with single pole MCB 'C' curve of 6 AMP, rating.

M&L in replacement Decorative LED post top lantern (PTL) luminior with die cast aluminium spigot, spun aluminium powder coated top cover clear/opal acralic difusser LED light fitting of 25 watt including LED lamp complete all as specified & directed.

Supply and connecting three core cord flexible wire, copper conductor multistranded, PVC insulated and overall PVC sheathed of size 1.5 Sqmm 1100 Volt , draw through LT steel tubular poles for connection to street light from junction box as directed including taking down old unserviceable cable complete all as specified by Engr- in- Charge.

S&F Cable route indicator, duly engraved with 'LT CABLE 1100 VOLT' on cast iron round plate 150 mm dia with provision of 500 mm long (minimum) single leg/stand of flat iron 40 x 5 mm, welded/riveted on back side of plate, fixed and grouted in position with PCC 1:3:6 type C-1, block of suitable size including taking down old unserviceable cable route indicator complete all as specified by Engr- in- Charge.

Taking down carefully existing unserviceable copper/aluminium point wiring (light/fan/socket or power point) complete with all accessories such as hylum sheet, switches, sockets, ceiling rose, wall brackets, regulator & making good distrubed surfaces of walls/floor etc and matching with existing surface all as specified and directed by Engr - in- Charge.

M & L for point wiring complete with 1.5 sqmm (nominal area) PVC insulated and unsheathed multi stranded copper conductor FRLSH cable (ISI marked) 1100 volts in existing concealed surface conduit and existing shunken box covered with new 3 mm thick bakelite laminated hylem sheet (ISI marked) for one light point /fan point/exhaust fan controlled by one switch including 1.5 sqmm single core multi stranded FRLSH copper earth wire to common earth and connecting to earth dolly complete all as specified

M&L in replacement Modular switch 1 way 6A, 1 module, complete all as specified and directed.

Excavation in trenches in soft/loose soil not exceeding 1.5 mtr wide and not exceeding 1.5mtr depth for foundation etc or for shafts, wells, cesspits, manholes, pier holes etc and getting out complete all as specified.

Returning filling in including spreading, levelling, watering and well ramming in layers not exceeding 25cm thick complete all as specified

Removing excavated soil to a distance not exceeding 50 metere and depositing where directed at a level not exceeding 1.5 metre above the starting point complete all as specified.

M&L for Sand cushioning using clean local tibba fine sand for underground cable 8 cm before laying cable and 15 cm after laying and punned to 18 cm after laying of cable completed all as specified. ( Note: punned thickness shall be considered for payment)

M&L for Factory made unreinforced precast concrete cable covers conforming to IS:5820, class HV type 1 size 300x180x40 mm for cable protection complete all as specified

Factory made unreinforced precast concrete cable covers conforming to IS:5820, class LV type 1 size 250x150x40 mm for cable protection complete all as specified.

Supply and fix fully cast aluminium body finished with polyurethane paint (with prior treatment) bollard of length 736 mm & circular base diameter of 177 mm and max diameter of leg of bollard 127 mm surmounted with fully cast aluminium body finished with PU paint with acrylic window cover B22 brass holder including OEM recommended PCC Foundation provided with aluminium cover with 20 Watt warm white Led bulb fixed/grouted in PCC base of size 45x45x60 cm with nut and bolts alongwith all as directed by Engr-in-Charge.

Supply and laying in replacement PVC copper cable 3 core 1.5 sqmm with pvc pipe laid inopen with the help of saddles of suitable size alongwith nut bolts all as specified and directed

Supply and fix in replacement Solar post top light LED 20 W Li-ion 14.8 V, 115 Wh, Poly crystalline solar Pv Module, 02 PIR Sensor with 360 degree coverage, maintenance free lithium battery with upto 1000 cycles and battery backup of 03 days,water proof IP65 Design,Elegant looking die cast aluminium housing IP 65 Protection, 5700 K alongwith manufactuer recommended Post top completely fitted in solar light and Grouted in ground With PCC foundation as required all as directed by Engr-in-Charge.

Supply and fixing in replacement security light fixture Endura city liner 70 W LED 6000K 72 watts including connection along with Gi pipe 32mm dia light grade with clamps and copper conductor cord flexible of size 23/0.0076 3 core complete all as specified and directed.

M&L scraping old paint from steel tubular swan neck pole of 8.5/9.0 mtr long or above and painting the same with one coat of synthetic water proof paint of existing colour complete all as specified and directed.

Supplying, laying testing of XLPE insulated , armourd , heavy duty electric cable , 1100 volts grade , with aluminium conductor of cross sectional area 16 sqmm 4 core in trencehes , in floors, passing through pipe including taking down old unserviceable cable complete all as specified by Engr- in- Charge.

M&L for in replacement contactor MNX 95 3 Pole 415 volts including fixing of all necessory cnnections all as specified and directed.

M&L for in replacement contactor MNX 80 3 Pole 415 volts including fixing of all necessory cnnections all as specified and directed.

Supply and fix in replacement soft starter Suitable for three phase motor pump 30 HP, With overload protection, underload protection, Locked load protection, soft start, soft stop, current limit, coated PCBA, Analog output ,built in bypass for energy saving. Operating voltage 208-600 volt AC all as directed by Engineer-in-charge

Supply and fix in replacement soft starter Suitable for three phase motor pump 25 HP, With overload protection, underload protection, Locked load protection, soft start, soft stop, current limit, coated PCBA, Analog output ,built in bypass for energy saving. Operating voltage 208-600 volt AC all as directed by Engineer-in-charge

Supply & fixing in replacement of worn out change over switch with Automatic Transfer Switch from one source to other with adjustable time delay of current rating 400 Amp, 4 pole, 415 Volt AC, utilization category AC 33 A, indicating status of the source to which load is connected, with provision of LCD display, phase separator for safety from phase to phase shorting & flashover having inbuilt protection for mains/DG against under/over voltage, under/over frequency and phase failure in SS Enlosure complete as conforming to IS / IEC 60947-6-1 including connecting all cable connections, testing and commissioning by providing alluminium lugs as required size complete in all respect and as directed..

Supply & fixing in replacement of worn out change over switch with Automatic Transfer Switch from one source to other with adjustable time delay of current rating 125 Amp, 4 pole, 415 Volt AC, utilization category AC 31 A, indicating status of the source to which load is connected, with provision of LCD display, phase separator for safety from phase to phase shorting & flashover having inbuilt protection for mains/DG against under/over voltage, under/over frequency and phase failure in SS Enlosure complete as conforming to IS / IEC 60947-6-1 including connecting all cable connections, testing and commissioning by providing alluminium lugs as required size complete in all respect and as directed.

Supply & fixing in replacement of MCCB - 630 Amp, 415 Volt, 4 pole, 50 KA with adjustable thermal magnetic protection, Ics = 75% Icu, thermal adjustable - 0.8 to 1 In, magnetic adjustment - 5 to 10 In in accordance with IS/IEC 60068-2-6 standard including making connection, testing and commissioning in LT panel complete all as specified and directed.

Supply and laying in replacement PVC copper cable 3 core 1.5 sqmm with pvc pipe laid in trench complete all as specified and directed.

Supply and fixing in replacement IP 66 flood light with high power LEDs 150 Watt 6000K complete fitting incl taking down old unsv light fitting complete all as specified and directed.

M&L earthing complete with galvanised steel earth plate electrode 60×60cm.× 6mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less'than 1.5 metres below normal ground level, connected to galvanised earth lead wire 4.0mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No. 3 connected to arthing test point all as specified or indicated including testing on completion complete including taking down old unserviceable earthing complete all as specified and directed.

Supply and fixing in replacement square recess/surface mounting downlight slim type LED luminaire light 18W cool white ,input voltage 230 volts,50Hz with driver/transformer etc suitable for AS/GB/POP ceiling inc making electric connections all as specified and directed.

Supply and fixing in replacement round type recess mounting downlight slim type LED luminaire light 15/16W cool white input voltage 230 volts,50Hz with driver/transformer etc suitable for AS/GB/POP ceiling incl making electric connections all as specified and directed.

Supply and fixing flexible in repalcement LED strip light 30W ,20mtr long ,cool/warm white ,incl LED driver and making all electric connections complete all as directed.

S&F in replacement environment friendly, energy efficient aesthetically designed circular shaped decorative wall/ceiling light LED 12 watt,6000K fixture with opal diffuser to give glare free light complete all as specified and as directed.

S&F in replacement recessed LED ceiling light with wide light window for maximized glare free output suitable for 600x600mm and ceiling cutout 595x595mm modular grid/POP ceiling complete fitting with separate electronic driver and high brightness LEDs 40 W (100 lumens per watt), not less than 5700K including connecting electric connectionand taking down old tube light fitting, complete all as specified and directed by Engineer-in-Charge.

S & F in replacement new gerneration energy saving & environmental friendly long life versatile pressure die-cast aluminium IP-66 roadway luminaire with high power LED of 25 watt with toughened glass complete with GI bracket (01 No) MS clamps (02 Nos) suitable for security light fitting fixing to wall / column & electrical connection to the light fitting providing 1.5 mtr long twin core round copper conductor cable of suitable size and testing complete all as specified and directed.

M & L in replacment recess mounted pressure die-cast aluminium luminaire in powder coated white finish in round porfile LED light 15 watt, 5700 K with optimized heat sink for efficient heat dissipation and separate replaceable electronic driver complete all as specified.

M & L concealed sub main wiring with 2 runs of 4 sqmm main wire along with 1 run of 4 sqmm earth wire (green in colour) single core FRLSH PVC insulated, unsheathed, multi-stranded, 1100 volts grade ISI marked copper conductor cable, drawn through and including adequate size rigid non-metallic PVC conduit (medium grade) with all fittings & accessories including cutting chases for conduits as required, sinking for terminal boxes, making good the same including taking down old unserviceable cable complete all as specified by Engr- in- Charge. NOTE:- Two runs of main copper conductor, one run of earth wire and one run of PVC conduit shall be measured as one unit length.

M & L concealed sub main wiring with 2 runs of 6 sqmm main wire along with 1 run of 6 sqmm earth wire (green in colour) single core FRLSH PVC insulated, unsheathed, multi-stranded, 1100 volts grade ISI marked copper conductor cable, drawn through and including adequate size rigid non-metallic PVC conduit (medium grade) with all fittings & accessories including cutting chases for conduits as required, sinking for terminal boxes, making good the same including taking down old unserviceable cable complete all as specified by Engr- in- Charge. NOTE:- Two runs of main copper conductor, one run of earth wire and one run of PVC conduit shall be measured as one unit length.

M & L concealed sub main wiring with 2 runs of 10 sqmm main wire along with 1 run of 10 sqmm earth wire (green in colour) single core FRLSH PVC insulated, unsheathed, multi-stranded, 1100 volts grade ISI marked copper conductor cable, drawn through and including adequate size rigid non-metallic PVC conduit (medium grade) with all fittings & accessories including cutting chases for conduits as required, sinking for terminal boxes, making good the same including taking down old unserviceable cable complete all as specified by Engr- in- Charge. NOTE:- Two runs of main copper conductor, one run of earth wire and one run of PVC conduit shall be measured as one unit length.

Supply and fixing in replacement of display board of outer size upto 4.1X1.0 mtr made out of stainless steel of thickness 2 mm at square pipe 8X8 cm with back support of 40X5 mm stainless steel plate fitted at 3 fet interval of board backside including writing name of installation and unit as directed with reflecting tape of any colour as directed alongwith legs of size 8X8 cm square pipe upto the height of 14 feet from ground with foundation with stand 26 km/hr air velocity alongwith 02 nos of spot light at suitable place as directed with point wiring as directed.

Supply & laying in replacement cable, 1100 volts grade heavy duty with ''XLPE'' insulated aluminium conductor standard served with an inner sheathing of PVC tape armoured with galvanised steel wire or tape and overall PVC sheathed of 120 Sqmm x 3.5 core size including fixing in Open with the help of saddles and nut bolt of suitable size all as specified and as directed.

S&F in replacement recessed LED light fitting 1 x 20 W, 220 V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size including taking down old tube light fitting, complete all as specified and directed by Engineer-in-Charge.

M & L replacment for wall mounted LED batten T-8 Retro LED 20 watt, (100Lumens per watt) appx 4' long pre-wired including LED tube light with inbuilt driver, not less than 6000 K, complete fitting and all other accessories fitting arrangement incl electric connection and extruded aluminium heat sink provided for efficient heat dissipation & integrated electronic driver complete all as specified

ASHOK INFRATECH (BID ID -3285709)

LOKESH ELECTRICAL (BID ID -3285959)

Karman Infra Projects (BID ID -3289529)

M/s Singh Engineering Corporation (BID ID -3289483)

M/s RCC (BID ID -3286034)

ISHWAR ENTERPRISES (BID ID -3289242)

national engineering (BID ID -3289652)

Balaji Associate (BID ID -3289174)

Haryana EngineerService (BID ID -3283166)

VIJAY ENTERPRISES (BID ID -3289647)

CREATIVE CONSTRUCTION (BID ID -3286117)