GE/DS-61/2024-25

Amount

Demolition of cement concrete (un-reinforced) in ground floors and pavings n exc 15 cm thickness (above or below ground level) complete all as specified and as directed.

Demolition of brick works built in cement mortor Complete.

M&L brick work with sub class `B' bricks straight or curved on plan exc. 6mtr mean radius built in cement mortor 1:4 complete.

M&L Brick work with sub class "B" bricks , straight or curved on in half brick thick wall built in cement mortar (1:4) complete all as specified.

Taking down cement or cement line plaster on bricks on storne walls etc incl racking out joints, heacking for key, scrubbing down with water complete.

M&L for 15 mm thick Cement Plaster in CM 1:4 on faces of brick/ concrete surface, finished even and smooth without using extra cement.

M&L for preperation of new plaster surfaces and applying two coats of cement base paint on wall over a coat of primer etc complete all as specified and as directed..

M&L for preperation of old decorated surfaces and applying one coat of cement base paint on wall etc complete all as specified and as directed.

M&L for Cement concrete 1:3:6 type C2 (using 40mm graded stone aggregate) in plinth protection, 75 mm thick, finished even and smooth without using extra cement in bays complete.

M & L Hardcore of broken stone or boulders gauge n exc. 63 mm, deposited, spread and levelled in layers n.exc. 15 cm thick, watered and rammed to a true surface .

M&L for 75 mm thick cement concrete type D-2, 1:4:8 (40mm graded stone aggregate) as in sub base.

M&L for Chequered cement concrete tiles with grey cement and pigment 30 cm x 30cm x 25 mm thick set & jointed and pointed in cement slurry to match over and including 15mm thick screed bed in CM1:6 in floors complete and all as specified and dirceted by Engineer in charge.

M&L Machine pressed precast concrete interlocking paver block any shape, colour and size confirming to IS 15658-2006 of 60 mm thickness, M-35 grade laid over and including 30mm thick sand cushion all as specified and as directed.

M&L for cement concrete (1:2:4) Type B2 (using 40 mm graded stone aggregate) as in foundations, filling and mass concrete, complete all as specified and as directed.

M&L for cement concrete type B-1, 1:2:4 using 20 mm graded stone aggregate as in holdfasts, coping on edges etc including weathering slightly rounded or chamfered angles and throating as directed including necessary formwork complete all as specified and as directed.

S&F in repairs 150 mm PVC (SWR) pipes single socketed in any length with rubber ring joints laid in trenches or in floors complete.

S&F Factory made precast cement concrete rounded edge kerb stone of size 300mm in ht and 150mm thk, cast in cement concrete (1:2:4) Type B1 (using 20 mm graded stone aggregate) set and jointed in cement mortar 1:4 including returning filling in earth work dispanced during removal and refiling of earth up to a level as required and well rammed complete all as directed.

M&L for two coats of synthetic enamel paint on new concrete or plastered surfaces (as in kerb stones etc) over a coat of primer including preparation of new surface complete all as specified and as directed.

M&L for one coat of synthetic enamel paint on old concrete or plastered surfaces (as in kerb stones etc) including preparation of old surface complete all as specified and as directed.

Dismantling stone slabs and tiles of any discription or thickness in floors, aprons etc, laid bedded and pointed in any mortar complete.

M & L for Granite (of any type) work 20 mm thk (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like over 20mm thick screed bed in CM 1:6 including pointing in white/coloured cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete

M & L for Granite (of any type) work (table rubbed and polished) for wall lining (veneering to wall) 12 mm thick in CM 1:3 including pointing in white/coloured cement (1:2) using marble dust with admixture of pigment to match with shade of granite over 15 mm thick cement plaster in CM (1:4) complete

M & L for Machine cut Kota stone slab flooring 20-25mm thick over 20 mm thick cement screed bed in CM (1:6) laid and jointed with grey cement slurry mixed with pigment to match the shade of slab including rubbing and polishing complete.

M & L for Kota stone slab 20-25mm thick in riser of steps, skirting, dado and pillar, laid over 15 mm thk cement plaster in CM (1:4) and jointed with grey cement slurry mixed with pigment to match the shade of slab including rubbing and polishing complete.

Dismantling wrought iron or mild steel/cast iron work of any description complete all as specified and directed.

M&L for Framed work such as grills, gratings, angle, square hollow pipe etc., with ends of bars shouldered and/or riveted, or forget into spikes; framed guard bars; barred iron doors; ladders; tracking for steel gates; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe 410-0 complete.

Excavating in post holes (or similar holes) each n.exc 0.50 cum getting out returning, filling in and ramming earth or broken rubble mixed with earth around, in layers n.exc 25 cm watering and removing surplus soil n.exc 50m and making good the surface in any type of soil.

M & L for Cement concrete 1:3:6 type C2 (using 40mm graded aggregate) as in foundations, filling and mass concrete complete all as specified and directed.

Dismentling fencing wire mesh , any type complete all as directed.

Fixing only chain link fencing including line wires, any mesh size and type and type of standards, rails, straining bolts etc including provision of binding wire complete all as specified.

Supply only MS galvanished chain link fencing with 3 mm dia and size 50 mm x 50 mm including line wires including strain bolts, binding wire etc complete all as directed.

S&F in repairs mild steel screw bolts (machine made) with hexagonal head at one end and screwed the other or screwed both ends each screwed and to be fitted with washers and with hexagonal nut of exc 5 cm length with dia of shanis 11 to 15 mm etc complete all as specified and directed.

Dismentling post or struts (wood, steel or RCC) any section , including taking out embedded in concrete portion and making good disturbed ground , if required complete.

S&F mild steel work such as in fencing post, tie bars etc including embedding into concrete and making holes for screwing of nut, bolts, cutting top to shape as directed, drilling holes, notching for wire etc confirming Fe 410-0 or Fe 310-0 complete all as specified and directed.

M&L for 2 coats of synthetic enamel paint over a coat of red oxide on steel surfaces exc 10 cm width or girth etc.

Restraining and resecuring including making good staples, plain mild steel wire ,in fencing including straining and fixing to wood, concrete or steel posts and/or to straining bolts, including securing with and provision of galvanised iron tying wire, galvanised iron staples or steel pins, etc. as directed(each line of wire to be measured)

Note :- The contract sum shall be after deducting the amount of credit shown in Sch of Credit of this tender

YP INFRA (BID ID -3086761)

Chaudhary Constructions (BID ID -3085321)

M/S GOPAL JEE SINGH (BID ID -3085102)

M/S Parmod Johar (BID ID -3077673)

M/S VERMA BUILDER (BID ID -3093432)