PROVISION OF DG SET FOR PERIMETER STREET/SECURITY LIGHTS AT AF CAMP NARAINA C/O AFND IN AOR OF GE (AF) FARIDABAD (2ND CALL)

Amount

Excavation in trenches not exc 1.5 m wide in depth for laying of cable or pipe for protection of cables or fixing of poles struts or stays and getting out in hard rock including triming the side and forming bottom surface to required level complete all as specified and directed by Engineer-in-Charge.

Excavation in trenches not exc 1.5 m wide in depth for laying of cable or pipe for protection of cables or fixing of poles struts or stays and getting out in hard rock including triming the side and forming bottom surface to required level complete all as specified and directed by Engineer-in-Charge.

Returning , filling in approved excavated , soil in including spreading ,leveling , watering and well ramming in layers not exceeding 25 cm thick, complete all as specified and directed by Engineer-in-Charge.

Removal of surplus excavated soil to a distance n exc 50m and deposited where directed at a level n exc 1.5 m above the starting points complete all as specified and directed by Engineer-in-Charge.

M & L for brick protection with sub class 'B' bricks laid dry flat over electric cable in trenches complete all as specified and directed by Engineer-in-Charge.

M & Labour for sand cushioning with a layer of sand 80mm thick consolidated before laying of cable and 150mm thick consolidated after laying of cable in trenches ducts for electric cable protection including consolidation complete all as specified and directed by Engineer-in-Charge.

M&L for PCC (1:3:6) type C2 with 40 mm gradded stone aggregate for foundation of poles/stay assembly or mass filling complete all as specified and directed by Engineer-in-Charge.

M&L for PCC (1:2:4) type B2 with 40 mm gradded stone aggregate for copping of poles or mass filling complete all as specified and directed by Engineer-in-Charge.

Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 25 sq mm 4 core complete all as specified and directed by Engineer-in-Charge.

Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 10 sq mm 4 core complete all as specified and directed by Engineer-in-Charge.

Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 6 sq mm 2 core complete all as specified and directed by Engineer-in-Charge.

Supply, installing testing and commissioning in replacement of factory made and tested (Including CPRI test cetified) outdoor type floor mounted LT panel board, cubical type suitable for 415 Volts 3 phase, 4 wire 50Hz, Ac supply system having busbar chember with insulated AL busbar of rating 500 A for phase installed on porcelin/SMC insulators. The panel shall be dust and vermin proof IP-54 class protection and made out of 2.00 mm thick CRCA MS sheet and angle iron frame 40x 40x 6mm thick frame work, powder coated finish over one coat of red oxide primer on outside surface and painted inside with two coat of red oxide primer, front and back opening type with aproaches for cable entry with double door shutter and locking arrangements including internal wiring with PVC insulated stranded copper conductor cable FRLS IS 694 sheathed 1100V grade of appropriate size complete all as specified and directed by Engineer-in-Charge. The panel shall be comprising of following:-

All as per Item No 12 above but with Outgoing as under :- OUTGOING- (i) MCCB 3 pole 32 Amps, 415 Volts with breaking capacity 16 KA.-02 No. (ii) Spare compartment for MCCB - 01 No. (iii) Astronomical Digital timer switch for street lights- 02 No.

Supply, install,testing and commissioning of Eco freindly not less than 40 KVA Diesel Engine driven generating set with acoustic enclosure made out of CRCA Sheet powder coated, specially designed lifting arrangement/hooks, meet the latest CPCB , norms of 75 dBA @ 1 mtr distance and as per the testing guide line of CPCB, DG Set shall be conforming to IS:10001/10002 and alternator as per IS: 13364, water cooled type, self starting system with 12 volt DC Supply, 3 phase 4 wire AC 415 volt + 5% at 1500 RPM, 50 Hz, 0.8 PF self exciled, self regulated, Automatic voltage regulation, class 'H' insulation type alternator, With AMF (Automatic mains faliure) panel for automatic starting at mains faliure installed with the following accessories complete all specified and directed by Engineer-in-Charge. (A) Engine Adequate capacity of Diesel Engine suitable not less than 40 KVA based on manufacturer reccomendation , Eco freindly for emission and noise ( CPCB NORMS COMPLIANCE) diesel engine confirming to BS/IS standard developing suitable BHP @ 1500 RPM water cooled complete under NTP condition with a provision for 10 % overload for one hour on 12 hours running complete with standard accessories all as specified and directed for safe handling and operation, salient features shall be as under :-

Note : Item No 14.00 Contd..../- (i) Fly wheel with housing (ii) Cooling system :- Mounted radiator with fan & belts. (iii) Cooling Water pump : - Centrifugal type belt driven. (iv) Exhaust System :- Exhaust System complete with exhaust piping of 75/80 mm dia with MS pipe light grade upto and away (as per CPCB norm) from the enclosure to be errected, covered with asbestos rope and aluminium foil of 28 SWG complete with in the enclosure for safe exhaust without transforming vibration to the wall of the enclousre. (a) Exhaust gas turbo charger type, (b) Exhaust manifold, (c) Silencer : Residential type, (d) Bellows Residential Silencer required inside exhaust enclosure (v) Fuel System :- (a) Fuel injection system with fuel injectors, fuel injection solenoid switch/ nozzles/ governer electronic type capable for 1% speed /frequecy regulation. (b) Fuel filters, (c) Fuel hoses (vi) Lub oil System :- (a) Lubricating oil filter, (b) Lubricating oil pump (vii) Air Intake System :- (a) Air intake Manifold, (b) Air cleaner dry type (viii) Governer :- Electronic Governer (ix) Starting System :- Electric Self starter with maintenace free batteries including battery charging set.

Note : Item No 14 Contd..../- (x) Batteries :- (a) 1 Nos, maintenece free Batteries of 12 Volt 100 AH capacity complete with copper conductor multistranded leads of suitable length from self starter to the battary terminals complete with initial charge and initial fill of electrolite, (b) Starter gear ring, (c) Start and stop push button, (d) Ignition key / Switch (xi) Handling and operation : Salient features of accessories shall be as under: (a) Radiator with blower fan, (b) Corrosion inhibitor coolant, (c) Paper element filters for fuel, lub oil and by pass, (d) Eelctronic governer controlled direct fuel injection system (xii) Generator Monitoring Panel: Comprising of following:- (a) Microprocessor based genset contoller (POWER COMMAND for metering, monitoring, governing and protection. (b) Engine protection for low lub oil pressure, high coolant temperature (alarm & shutdown), (c) Alternator protection parameters like under voltage, over current, under frequency, over frequency ( alarm & shut down), (d) Relay drivers for remote annuciations, (e) Cyclic cranking, (f) Auto/manual start/ stop, (g) Alternator trim adjustment from the front key pad, (h) operates within a temperature range 0- 60 degrees C and humidity upto 95% , (j) Remote monitoring capabilty through separate interface modules, (k) Genset metering parameters like lube oil pressure, coolant temperature, engine speed(rpm), run hours, DC voltage, intake manifold temperature, 3 phase volts and 3 phase amperes, frequency, KW, KVA, power factor etc.

Note : Item No 14.00 Contd..../- (xiii) Safety Controls : - Engine low lube oil pressure, high water temparature and over speeding of engine. (xiv) Coupling arrangement : - Flexible coupling, fly wheel to suit flexible coupling fly wheel housing. (xv) Accessories :- AVM Pads built or separtely mounted to manufacturer base frames. (xvi) Base Frame : - As per OEM design of sturdy design made of MS channel with necessary reinforcement and predetermined holes. (xvii) Fuel Tank :- Daily service fuel tank of capacity 130 Ltrs made out of 3mm thick HR sheet top and bottom with caliberated level indicating arrangement, stop cock, drain plug, fuel pump of suitable capacity complete on a common base within the Acoustic Enclosure. (B). Alternator :- Standard design alternator rated at not less than 40 kva net output at site after considering derating as per site conditions at 0.8 (lag) power factor AC, 3 - phase 4 - wire 415 volts 50 Hz, 1500 RPM, self exicited self regulated screen protected drip proof IP 23 enclosure brushless design with winding in pole faces, insulating class 'H' and voltage regulation of + 1% at rated voltage from no load to full load. The alternator shall be confirming to BS 2613 and shall be inposition to generate supply with frequency regulation with in + 1% tolerace. The alternator will be suitable for tropical climate and shall generally confirm to BS - 2613/ IS - 4722.

Note : Item No 14 Contd..../- (iv) Sheet metal components of the enclosure should undergo various stages of surface treatment prior to painting which leads to be better life of the enclosure against weathering action. (v) Special paint treatment with pure polyester powder / epoxy to be provided for better weather resistance. (vi) Well designed ventilation system to be provided to pump up the heat in the chamber efficiently. (vii) For effective acoustic / weather sealing a special type weather sealing gaskets, new frame rubber gaskets to used. (viii) Working space is to be provided around the equipment for easy maintenance / repairs. (ix) Necessary cut out provision for entry and exist of fuel lines cable to be incorporated in the enclosure as per the requirement. (x) A see through transparent window (glass or acrylic) in front of engine panel to provided for monitoring the operation. (xi) Ducting if required, bellows, mechanical hardware like locks, hinges fasteners etc to be provided. (xii) Deliverables. 75 dBA @ 1mtr at 75% load under free field conditions. The temp inside the enclosure will be within 7 Degree above ambient temp. (xiii) The enclosure should be provided with bulk head light fitting for inside illumination (xiv) The battaries should be placed inside the enclosure beside the DG Set on a suitable inlsulated plat form.

Note : Item No 14.00 Contd..../- (xv) The DG Set should be provided with external Emergency stop push button. (xvi) The acoustic enclosure parts shall be of powder coated after pre treatment process. The powder coating shade should be Genset Green/As per OEM. The base frame should be painted with epoxy based black shade.

Supply, install,testing and commissioning of Eco freindly not less than 63/62.5 KVA Diesel Engine driven generating set with acoustic enclosure made out of CRCA Sheet powder coated, specially designed lifting arrangement/hooks, meet the latest CPCB , norms of 75 dBA @ 1 mtr distance and as per the testing guide line of CPCB, DG Set shall be conforming to IS:10001/10002 and alternator as per IS: 13364, water cooled type, self starting system with 12 volt DC Supply, 3 phase 4 wire AC 415 volt + 5% at 1500 RPM, 50 Hz, 0.8 PF self exciled, self regulated, Automatic voltage regulation, class 'H' insulation type alternator, With AMF (Automatic mains faliure) panel for automatic starting at mains faliure installed with the following accessories complete all as specified and directed by Engineer-in-Charge. (A) Engine Adequate capacity of Diesel Engine suitable not less than 63/62.5 KVA based on manufacturer reccomendation , Eco freindly for emission and noise ( CPCB NORMS COMPLIANCE) diesel engine confirming to BS/IS standard developing suitable BHP @ 1500 RPM water cooled complete under NTP condition with a provision for 10 % overload for one hour on 12 hours running complete with standard accessories all as specified and directed for safe handling and operation, salient features shall be as under :-

Note : Item No 15.00 Contd..../- (i) Fly wheel with housing (ii) Cooling system :- Mounted radiator with fan & belts. (iii) Cooling Water pump : - Centrifugal type belt driven. (iv) Exhaust System :- Exhaust System complete with exhaust piping of 75/80 mm dia with MS pipe light grade upto and away (as per CPCB norm) from the enclosure to be errected, covered with asbestos rope and aluminium foil of 28 SWG complete with in the enclosure for safe exhaust without transforming vibration to the wall of the enclousre. (a) Exhaust gas turbo charger type, (b) Exhaust manifold, (c) Silencer : Residential type, (d) Bellows. (v) Fuel System :- (a) Fuel injection system with fuel injectors, fuel injection solenoid switch/ nozzles/ governer electronic type capable for 1% speed /frequecy regulation, (b) Fuel filters, (c) Fuel hoses. (vi) Lub oil System :- (a) Lubricating oil filter, (b) Lubricating oil pump. (vii) Air Intake System :- (a) Air intake Manifold, (b) Air cleaner dry type (viii) Governer :- Electronic Governer. (ix) Starting System :- Electric Self starter with maintenace free batteries including battery charging set. (x) Batteries :- (a) 1 Nos, maintenece free Batteries of 12 Volt 130 AH capacity complete with copper conductor multistranded leads of suitable length from self starter to the battary terminals complete with initial charge and initial fill of electrolite, (b) Starter gear ring, (c) Start and stop push button, (d) Ignition key / Switch.

Note : Item No 15.00 Contd..../- (xi) Handling and operation : Salient features of accessories shall be as under: (a) Radiator with blower fan, (b) Corrosion inhibitor coolant, (c) Paper element filters for fuel, lub oil and by pass, (d) Eelctronic governer controlled direct fuel injection system. (xii) Generator Monitoring Panel: Comprising of following:- (a) Microprocessor based genset contoller (POWER COMMAND for metering, monitoring, governing and protection, (b) Engine protection for low lub oil pressure, high coolant temperature (alarm & shutdown), (c) Alternator protection parameters like under voltage, over current, under frequency, over frequency ( alarm & shut down), (d) Relay drivers for remote annuciations, (e) Cyclic cranking, (f) Auto/manual start/ stop, (g) Alternator trim adjustment from the front key pad, (h) operates within a temperature range 0- 60 degrees C and humidity upto 95%, (j) Remote monitoring capabilty through separate interface modules, (k) Genset metering parameters like lube oil pressure, coolant temperature, engine speed(rpm), run hours, DC voltage, intake manifold temperature, 3 phase volts and 3 phase amperes, frequency, KW, KVA, power factor etc. (xiii) Safety Controls : - Engine low lube oil pressure, high water temparature and over speeding of engine. (xiv) Coupling arrangement : - Flexible coupling, fly wheel to suit flexible coupling fly wheel housing. (xv) Accessories :- AVM Pads built or separtely mounted to manufacturer base frames.

Note : Item No 15.00 Contd..../- (xvi) Base Frame : - As per OEM of sturdy design made of MS channel with necessary reinforcement and predetermined holes. (xvii) Fuel Tank :- Daily service fuel tank of capacity 130 Ltrs made out of 3mm thick HR sheet top and bottom with caliberated level indicating arrangement, stop cock, drain plug, fuel pump of suitable capacity complete on a common base within the Acoustic Enclosure. (B). Alternator :- Standard design alternator rated at not less than 63/62.5 kva net output at site after considering derating as per site conditions at 0.8 (lag) power factor AC, 3 - phase 4 - wire 415 volts 50 Hz, 1500 RPM, self exicited self regulated screen protected drip proof IP 23 enclosure brushless design with winding in pole faces, insulating class 'H' and voltage regulation of + 1% at rated voltage from no load to full load. The alternator shall be confirming to BS 2613 and shall be inposition to generate supply with frequency regulation with in + 1% tolerace. The alternator will be suitable for tropical climate and shall generally confirm to BS - 2613/ IS - 4722. (i) Insualation class - 'H' (ii) Temparature rise Class - 'H' (iii) Excitation : Self Excited (iv) Regulation performance: The voltage is kept constant with + 1%, manual voltage adjustment within + 5% . (v) Frequency regulation + 1%

Note : Item No 15.00 Contd..../- (vi) Well designed ventilation system to be provided to pump up the heat in the chamber efficiently. (vii) For effective acoustic / weather sealing a special type weather sealing gaskets, new frame rubber gaskets to used. (viii) Working space is to be provided around the equipment for easy maintenance / repairs. (ix) Necessary cut out provision for entry and exist of fuel lines cable to be incorporated in the enclosure as per the requirement. (x) A see through transparent window (glass or acrylic) in front of engine panel to provided for monitoring the operation. (xi) Ducting if required, bellows, mechanical hardware like locks, hinges fasteners etc to be provided. (xii) Deliverables. 75 dBA @ 1mtr at 75% load under free field conditions. The temp inside the enclosure will be within 7 Degree above ambient temp. (xiii) The enclosure should be provided with bulk head light fitting for inside illumination (xiv) The battaries should be placed inside the enclosure beside the DG Set on a suitable inlsulated plat form. (xv) The DG Set should be provided with external Emergency stop push button.

Note : Item No 15.00 Contd..../- (xvi) The acoustic enclosure parts shall be of powder coated after pre treatment process. The powder coating shade should be Genset Green. The base frame should be painted with epoxy based black shade. Note: (a) Pre commissioning test shall be carried out in overall cost quoted. (b) Drawings shall be approved by GE before placement of order by contractor. (c) Any damage done to building shall be made good by contractor within overall coast quoted. (d) Cost of OEM specified all civil works including PCC plat form and related to foundations of DG Set including making good of distrubed surface after installtion and commissioning of genset is including in the overall cost quoted.

Supply and fixing LED street light fitting 70 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete all as specified and directed by Engineer-in-Charge.

M & L for earthing with steel earth plate electrode of size 60 x 60 cm x 6 mm thick buried directly in ground to a depth not less than 2.25 mtr deep below normal ground level with top edge of the earth plate not less tha 1.5 mtr deep below normal grund level connected to galvanized iron strip size 32 x 6 mm as earthing lead by means of nuts, bolts and washers of steel after wlding of GIstrip to earth electrode to the full length of earht plate, 40mm dia GI tubing lightgrade protection pipe upto test point, 20mm dia GI watering pipe with funnel and wire mesh, PCC pit 1:3:6 with pit cover ofsize 30x30 cm made of RCC 1:3: with suitable handle, angle iron frame made of angle iron of size 40x40x4m, adequate qty of charcoal dust and salt layers all around the earth plate and filling of vegetables soil to the remaining 10% removal of surplus soil and retruning filling in all as required at site including test point made outof steel plate of size 75x75x6mm fixed to wall all as specified in plate No 3 of SSR Part-I complete all as specified and directed by Engineer-in-Charge

Supply and fix of steel tubular swaged poles type 410 SP 31(9 mtr long) single swan Neck type complete with CI base plate final taper plug bolt, nut,screw including painting with two coat of aluminium paint over a coat of red oxide primer and making 5 strips of 30 cm with in blue and white color of alternate strip including all PCC work complete all as specified and directed by Engineer-in-Charge

S&F in replacement street light GI pipe bracket 50 mm dia 1.50metre length (ISI marked) light grade bend to shape with two Nos MS clamp duly painted nuts and bolts etc complete all as specified and directed by Engineer-in-Charge

M& L for Dismantling of old unsv PCC poles of any size /type carefully and removing from site in parts or whole complete all as specified and directed by Engineer-in-Charge

Supply and fixing factory made ABS plastic body with IP66 ingress protection 3 phase Pole mounted Junction Box /cut-out box/ Fuse Box ior road /streetlighting for 3 phase/4 core high wattage LED based lightingsystem for lndustrial, commercial as well as floodlighting applications.S uitable for power circ uits. Back face for perfect alignments with pole complete all as specified and directed by Engineer-in-Charge

Supply and fixing LED flood light 70 watt 230 V AC outdoor type with thermal management in multiple optics and equipped with IP66 protection, with impact and corrosion resistant complete with driver and lamp complete all as specified and directed by Engineer-in-Charge

airstack india

Commercial Traders

M/S Anand Enterprises

MAHABIR SINGH

M/S Yamin

Leo Air and Power Solution pvt Ltd.

Saini Enterprises

Electromech Engineers

Haryana EngineerService