Loading…
Loading…
Tender Value
₹5.2 Cr
EMD Value
₹10.5 L
Closing Date
31 Aug 2026, 2:00 pm7d left
No
No
Single Packet System
Normal Tender
No
Not Applicable
Lowest to Highest
60 days
Expenditure
Capital (Works)
TENDER SEC
14 conditions · 3 needing a document upload
For works costing more than Rs.50 lakhs - The tenderer must have minimum average annual contractual turnover of V/N or 'V' which ever is less; where V= Advertised value of the tender in crores of Rupees N= Number of years prescribed for completion of work for which bids have been invited. The average annual contractual turnover shall be calculated as an average of "total contractual payments" in the previous three financial years, as per the audited balance sheet. However, in case balance sheet of the previous year is yet to be prepared/ audited, the audited balance sheet of the fourth previous year shall be considered for calculating average annual contractual turnover. The tenderers shall submit requisite information as per Annexure-VIB, along with copies of Audited Balance Sheets duly certified by the Chartered Accountant/ Certificate from Chartered Accountant duly supported by Audited Balance Sheet.
Similar nature of work: Any Civil Engineering Work involving Fabrication and erection of steel structures
26 conditions · 3 needing a document upload
Whether required test certificates/ samples, if any have been uploaded?
The tenderer shall clearly specify whether the tender is submitted on his own (Proprietary Firm) or on behalf of a Partnership Firm / Company / Joint Venture (JV) / Registered Society/ Registered Trust / Hindu Undivided Family( HUF) / Limited Liability Partnership (LLP) etc. The tenderer(s) shall enclose the attested copies of the requisite documents (including Power of Atorney, if opted) for constitution of their concern as per Cl.14 of GCC-Part-l and as per a) Clause 17 of GCC - Part-1, for JV b) Clause 18 of GCC - Part 1, for Partnership Firm
Copies of the following documents are to be uploaded: (i) Details such as Name of the tenderer/ Contractor, Validity of DSC, Complete address with pin code, Contact Number (ii) Copy of PAN Card (iii) Copy of GSTIN card
A copy of NEFT form duly filled in the details as necessary to be uploaded. (The Tenderer/ Contractor not having NEFT form may down load the empty NEFT form available in document site)
Submission of Annexure-V under Document Verification Certificate- As per Advance Correction Slip No.4 dt.07/08/2023 to GCC - 2022, the tenderers shall submit copy of certificate stating that they are not liable to be disqualified and all their statements/documents submitted along with bid are true and factual. Standard format of the certificate to be submitted by the bidder in form of Annexure V. Non-submission of the above Certificate(s) by the bidder shall result in summarily rejection of his/their bid.
Submission of Annexure-V(A) under Document Verification Certificate : In case of other than Company/Proprietary firm, Annexure-V(A) shall also be submitted by the each member of a Partnership Firm/Joint Venture (JV) /Hindu Undivided Family (HUF) / Limited Liability Partnership (LLP) etc., as the case may be. Non-submission of the above Certificate (s) by the bidder shall result in summarily rejection of his/their bid.
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
Improvement to Drainage arrangement at LUS No.126A, 170A, 170B (MDU - BDNK line) , 125A, 114A (MDU-MNM line) & 1426 Dn (MDU - DG) line
MDU-W-11-2026-03~SR
MDU-W-11-2026-03
Open
Works - General
12 Months
Madurai, Tamil Nadu
₹0
₹10.5 L
6 Aug 2026
6 Aug 2026
17 Aug 2026
78 items across 10 schedules · ₹3,98,06,970.46 total
| # | Description | Unit | Qty | Rate | Amount |
|---|---|---|---|---|---|
| 1 | Columns, Pillars, Piers, Abutments, Posts and Struts | Sqm | 2085 | 804.25 | 16,76,861.25 |
| 2 | Concrete of M25 grade with minimum cement content of 330 kg /cum | cum | 177.75 | 8,683.8 | 15,43,545.45 |
| 3 | Add for using extra cement in the items of design mix over and above the specified cement content therein. | Quintal | 58.66 | 688.45 | 40,384.48 |
| 4 | Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. | Kg | 16784 | 111.95 | 18,78,968.8 |
| 5 | Hot finished welded type tubes | Kg | 100714 | 154.9 | 1,56,00,598.6 |
| 6 | Providing and fixing mild steel round holding down bolts with nuts and washer plates complete. | Kg | 1335 | 88.5 | 1,18,147.5 |
| 7 | Extra for providing and fixing wind ties of 40x 6 mm flat iron section. | Metre | 4350 | 163.65 | 7,11,877.5 |
| 8 | Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in- charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. | Sqm | 7870 | 671.55 | 52,85,098.5 |
| 9 | Two or more coats applied on walls @ 1.25 ltr/10 sqm over and including one coat of Special primer applied @ 0.75 ltr /10 sqm | Sqm | 2085 | 158.95 | 3,31,410.75 |
| 10 | Two or more coats on new work | Sqm | 18641 | 131.45 | 24,50,359.45 |
| 11 | Demolishing R.C.C. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead as per direction of Engineer - in- charge. | cum | 41.25 | 2,928.1 | 1,20,784.13 |
| Schedule total | ₹2,97,58,036.41 | ||||
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
GCCApril2022withcorrectionSlip1to11_compressed.pdf
ATTACHMENT
RulesandRegulationsAug23.pdf
ATTACHMENT
SRcivilworkspecialtechnicalconditons-alt-1.pdf
ATTACHMENT
BankGuaranteeBond-Modelform.pdf
ATTACHMENT
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at [email protected].